Nitrogen-Doped Starbons®: Methodology Development and Carbon Dioxide Capture Capability

Five nitrogen sources (glycine, β-alanine, urea, melamine and nicotinamide) and three heating methods (thermal, monomodal microwave and multimodal microwave) are used to prepare nitrogen-doped Starbons® derived from starch. The materials are initially produced at 250-300 °C (SNx 300y ), then heated in vacuo to 800 °C to produce nitrogen-doped SNx 800y 's. Melamine gives the highest nitrogen incorporation without destroying the Starbon® pore structure and the microwave heating methods give higher nitrogen incorporations than thermal heating. The carbon dioxide adsorption capacities of the nitrogen-doped Starbons® determined gravimetrically, in many cases exceed those of S300 and S800. The carbon dioxide, nitrogen and methane adsorption isotherms of the most promising materials are measured volumetrically. Most of the nitrogen-doped materials show higher carbon dioxide adsorption capacities than S800, but lower methane and nitrogen adsorption capacities. As a result, the nitrogen-doped Starbons® exhibit significantly enhanced carbon dioxide versus nitrogen and methane versus nitrogen selectivities compared to S800.

Introducing the Reversible Reaction of CO2 with Diamines into Nonisocyanate Polyurethane Synthesis

Nonisocyanate polyurethanes (NIPUs) are considered greener alternatives to traditional polyurethanes, and the preparation of NIPUs considerably depends on the design and synthesis of suitable monomers. Herein, we propose a toolbox for in situ capturing and conversion of CO2 into α,ω-diene-functionalized carbamate monomers by taking advantage of the facile reversible reaction of CO2 with diamines in the presence of organic superbases. The activation of CO2 into carbamate intermedia was demonstrated by NMR and in situ FTIR, and the optimal conditions to prepare α,ω-diene-functionalized carbamate monomers were established. Thiol-ene and acyclic diene metathesis (ADMET) polymerization of these monomers under mild conditions yielded a series of poly(thioether urethane)s and unsaturated aromatic-aliphatic polyurethanes with high yield and glass transition temperatures ranging from -26.8 to -1.1 °C. These obtained NIPUs could be further modified via postpolymerization oxidation or hydrogenation to yield poly(sulfone urethane) and saturated polyurethane with tunable properties.

The synthesis of multifunctional cellulose graft alternating copolymers of 3,4-dihydrocoumarin and epoxides in DBU/DMSO/CO2 solvent system

Cellulose graft copolymers having well-defined structures could incorporate the characteristics of both the cellulose skeleton and side chains, providing a new method for the preparation functionalised cellulose derivatives. Herein, a series of multifunctional cellulose grafted, alternating 3,4-dihydrocoumarin (DHC) and epoxide (EPO) copolymers (cell-g-P(DHC-alt-EPO)) were prepared in a metal-free DBU/DMSO/CO2 solvent system without adding additional catalyst. Four examples of cell-g-P(DHC-alt-EPO) with tunable thermal and optical properties were synthesized by copolymerization of DHC with styrene oxide (SO), propylene oxide (PO), cyclohexene oxide (CHO) or furfuryl glycidyl ether (FGE) onto cellulose. The nonconjugated cell-g-P(DHC-alt-EPO) showed UV absorption properties with the maximum absorption peak at 282 nm and 295 nm and photoluminescence performance. A clustering-triggered emission mechanism was confirmed and consistent with DFT theoretical calculations. In DMSO solution, the copolymer (DHCSO5) with DP of 11.64 showed ACQ behaviour as the concentration increased. In addition, DHCSO5 had good antioxidant capacity with an instantaneous radical scavenging activity of 2,2-diphenyl-1-picrylhydrazine (DPPH) up to 65 % at a concentration of 40 mg/ ml and increased to 100 % after 30 min. Thus, the multifunctional cell-g-P(DHC-alt-EPO) materials had a variety of potential applications in the fields of fluorescent printing, bio-imaging, UV- shielding and antioxidants.

Ex vivo study of molecular changes of stained teeth following hydrogen peroxide and peroxymonosulfate treatments

White teeth can give confidence and tend to be associated with a healthier lifestyle in modern society. Therefore, tooth-bleaching strategies have been developed, including the use of hydrogen peroxide. Recently, peroxymonosulfate has been introduced as an alternative bleaching method to hydrogen peroxide. Although both chemicals are oxidizing agents, their effects on the molecular composition of the stained teeth are yet unknown. In this study, the molecular profiles of teeth bleached with hydrogen peroxide and peroxymonosulfate were compared using Liquid Chromatography-Tandem Mass Spectrometry. Statistical analyses were used to assess the samples. In addition, reference spectral libraries and in silico tools were used to perform metabolite annotation. Overall, principal component analysis showed a strong separation between control and hydrogen peroxide and peroxymonosulfate samples (p < 0.001). The analysis of molecular changes revealed amino acids and dipeptides in stained teeth samples after hydrogen peroxide and peroxymonosulfate treatments. Noteworthy, the two bleaching methods led to distinct molecular profiles. For example, diterpenoids were more prevalent after peroxymonosulfate treatment, while a greater abundance of alkaloids was detected after hydrogen peroxide treatment. Whereas non-bleached samples (controls) showed mainly lipids. Therefore, this study shows how two different tooth-whitening peroxides could affect the molecular profiles of human teeth.

A case study of the development of a videofluoroscopy service: Integration and collaboration between the speech & language therapy and radiographer teams

BACKGROUND

Videofluoroscopy (VFSS) is a dynamic fluoroscopic examination of swallowing function to assess oropharyngeal dysphagia. In the United Kingdom (UK), this test is typically performed by a team of Speech and Language Therapists (SLTs), radiologists and radiographers. While VFSS is undertaken across the UK, recent literature reflects wide variation in the procedure itself.

OBJECTIVES

The role of the advanced practitioner gastrointestinal (GI) radiographer within a VFSS service will be illustrated by the narrative description of a VFSS service in a large NHS teaching hospital in England. The paper compares the existing VFSS service against recent literature outlining national practice, with particular focus upon the growing role of the advanced practitioner GI radiographer. Existing pressures upon the National Health Service (NHS) are examined as contributing factors. Lastly, further plans to improve the clinic are delineated.

KEY FINDINGS

Recent literature shows a wide national variation in the running of VFSS services. Pertinently, the evidence suggests that radiologists are becoming progressively less involved in these clinics, with a move towards more practitioner-led services. The changes to the described VFSS service are in line with national trends, and the described clinic is an effective example of a practitioner-led service which fully utilises the role of the advanced practitioner GI radiographer.

CONCLUSION

This paper demonstrates that a practitioner-led service can benefit both patients and staff. Further improvement work is ongoing, with a particular need to involve service users and collect more meaningful outcome measures.

IMPLICATIONS FOR PRACTICE

The growing move towards practitioner-led clinics is likely to continue. However, the wide variation in practice nationally and lack of consistent, recognised training that meets the needs of both SLT and radiographers, needs to be addressed.

Biomass Derived, Hierarchically Porous, Activated Starbons® as Adsorbents for Volatile Organic Compounds

The use of potassium hydroxide activated Starbons® derived from starch and alginic acid as adsorbents for 29 volatile organic compounds (VOCs) was investigated. In every case, the alginic acid derived Starbon (A800K2) was found to be the optimal adsorbent, significantly outperforming both commercial activated carbon and starch derived, activated Starbon (S800K2). The saturated adsorption capacity of A800K2 depends on both the size of the VOC and the functional groups it contains. The highest saturated adsorption capacities were obtained with small VOCs. For VOC's of similar size, the presence of polarizable electrons in lone pairs or π-bonds within non-polar VOCs was beneficial. Analysis of porosimetry data suggests that the VOC's are being adsorbed within the pore structure of A800K2 rather than just on its surface. The adsorption was completely reversible by thermal treatment of the saturated Starbon under vacuum.

Rapid and efficient adsorption of methylene blue dye from aqueous solution by hierarchically porous, activated starbons®: Mechanism and porosity dependence

Hierarchically porous activated Starbons® derived from starch are found to make excellent adsorbents for methylene blue, even in the presence of other dyes and inorganic salts, highlighting their potential to be used in water purification. The optimal material (S950C90) has a methylene blue adsorption capacity (891 mg g^-1) almost nine times higher than that of unactivated S800 and four times higher than that of commercial activated carbon at 298 K. The adsorption of methylene blue onto optimal materials (S950C90 and S800K4) reaches equilibrium within 5 min. Adsorption data for all the adsorbents show a good fit to the Freundlich isotherm which allows the Gibbs free energies of adsorption to be calculated. The adsorption capacities increase as the pH of the methylene blue solution increases, allowing the dye to be desorbed by treatment with acidic ethanol and the Starbon® materials reused. Porosimetry and SEM-EDX imaging indicate that methylene blue adsorbs throughout the surface and completely fills all the micropores in the Starbon® adsorbent. The methylene blue adsorption capacities show excellent correlations with both the BET surface areas and the micropore volumes of the materials.

Closing the loop in the synthesis of heteroscorpionate-based aluminium helicates: catalytic studies for cyclic carbonate synthesis

Novel polynuclear helical aluminium complexes supported by bulky heteroscorpionate ligands have been developed and characterised. The use of bulkier ligands has allowed the isolation of unprecedented intermediates for the preparation of helical aluminium complexes. The catalytic activity of these aluminium complexes for cyclic carbonates formation has also been investigated under mild reaction conditions. The combination of complex 16 and Bu₄NBr catalysed the synthesis of a broad range of monosubstituted cyclic carbonates from their corresponding epoxides and CO₂ at 25 °C and one bar of CO₂ pressure. This catalyst system also showed good catalytic activity for the preparation of disubstituted cyclic carbonates from internal epoxides and CO₂.

Effects of chill unit accumulation and temperature on woody plant deacclimation kinetics

Woody perennials in temperate climates develop cold hardiness in the fall (acclimation) and lose cold hardiness in the spring (deacclimation) to survive freezing winter temperatures. Two main factors known to regulate deacclimation responses are dormancy status and temperature. However, the progression of deacclimation responses throughout the dormant period and across a range of temperatures is not well described. More detailed descriptions of dormancy status and temperature, as factors regulating deacclimation, are necessary to understand the timing and magnitude of freeze injury risks for woody perennials in temperate climates. In this study, we modeled deacclimation responses in cold-climate interspecific hybrid grapevine cultivars throughout the dormant period by integrating chill accumulation and temperature through the concept of deacclimation potential. We evaluated deacclimation and budbreak under multiple temperature treatments and chill unit accumulation levels using differential thermal analysis (DTA) and bud forcing assays. Deacclimation responses increased continuously following logistic trends for both increasing chill unit accumulation and increasing temperature. There are optimal temperatures where deacclimation rates increased but changes in deacclimation rates diminished below and above these temperatures. The cumulative chill unit range where deacclimation potential increased overlapped with the transition from endo- to ecodormancy. Therefore, deacclimation potential could provide a quantitative method for describing dormancy transitions that do not rely on the visual evaluation of budbreak. This information provides a more detailed understanding of when and how deacclimation contributes to increased risks by freezing injury. In addition, our descriptions could inform improvements to models predicting cold hardiness, dormancy transitions, and spring phenology.

Carboxylcellulose hydrogel confined-Fe3O4 nanoparticles catalyst for Fenton-like degradation of Rhodamine B

Facile preparation of functional hydrogel materials for environmental catalysis is a hot research topic of soft materials science and green catalysis. In this study, a carboxylcellulose hydrogel confined Fe₃O₄ nanoparticles composite catalyst (Fe₃O₄@CHC) with magnetic recyclability has been synthesized by taking the advantages of the newly developed cellulose solution in tetramethyl guanidine/DMSO/CO₂ through in situ acylation using mixed cyclic anhydrides and ion exchange reaction. The achieved Fe₃O₄@CHC hydrogel catalyst was shown to be an more efficient and better Fenton-like catalyst for decomposition of the organic dye rhodamine B (RhB) in the presence of hydrogen peroxide, with almost complete decomposition occurring within 180 min, in comparison with Fe₃O₄@cellulose hydrogel (CH) with excellent recyclability. This work provided a facile strategy for the preparation of hydrogel-based functional composite green catalytic materials, which has potential applications in green catalysis.

Efficient Synthesis of Cyclic Carbonates from Unsaturated Acids and Carbon Dioxide and their Application in the Synthesis of Biobased Polyurethanes

Bio-derived furan- and diacid-derived cyclic carbonates have been synthesized in high yields from terminal epoxides and CO₂ . Furthermore, four highly substituted terpene-derived cyclic carbonates were isolated in good yields with excellent diastereoselectivity in some cases. Eleven new cyclic carbonates derived from 10-undecenoic acid under mild reaction conditions were prepared, providing the corresponding carbonate products in excellent yields. The catalyst system also performed the conversion of an epoxidized fatty acid n-pentyl ester into a cyclic carbonate under relatively mild reaction conditions (80 °C, 20 bar, 24 h). This bis(cyclic carbonate) was obtained in high yields and with different cis/trans ratios depending on the co-catalyst used. An allyl alcohol by-product was only observed as a minor product when bis(triphenylphosphine)iminium chloride was used as co-catalyst. Finally, two cyclic carbonates were used as building blocks for the preparation of non-isocyanate poly(hydroxy)urethanes by reaction with 1,4-diaminobutane.

Structural analysis of five-coordinate aluminium(salen) complexes and its relationship to their catalytic activity

The crystal structure of [Al(tBu-salen)]2O·HCl shows major changes compared to that of [Al(tBu-salen)]2O. The additional proton is localized on the bridging oxygen atom, making the aluminium atoms more electron deficient. As a result, a water molecule coordinates to one of the aluminium atoms, which becomes six-coordinate. This pushes the salen ligand associated with the six-coordinate aluminium ion closer to the other salen ligand and results in the geometry around the five-coordinate aluminium atom becoming more trigonal bipyramidal. These results experimentally mirror the predications of DFT calculations on the interaction of [Al(tBu-salen)]2O and related complexes with carbon dioxide. Variable temperature NMR studies of protonated [Al(tBu-salen)]2O complexes revealed that the structures were dynamic and could be explained on the basis of an intramolecular rearrangement in which the non-salen substituent of a five-coordinate aluminium(tBu-salen) unit migrates from one face of a square based pyramidal structure to the other via the formation of structures with trigonal bipyramidal geometries. Protonated [Al(tBu-salen)]2O complexes were shown to have enhanced Lewis acidity relative to [Al(tBu-salen)]2O, coordinating to water, dioxane and 1,2-epoxyhexane. Coordinated epoxyhexane was activated towards ring-opening, to give various species which remained coordinated to the aluminium centers. The protonated [Al(tBu-salen)]2O complexes catalysed the synthesis of cyclic carbonates from epoxides and carbon dioxide both in the presence and absence of tetrabutylammonium bromide as a nucleophilic cocatalyst. The catalytic activity was principally determined by the nature of the nucleophilic species within the catalyst structure rather than by changes to the Lewis acidity of the metal centers.

Opportunities for the Use of Brazilian Biomass to Produce Renewable Chemicals and Materials

This Review highlights the principal crops of Brazil and how their harvest waste can be used in the chemicals and materials industries. The Review covers various plants; with grains, fruits, trees and nuts all being discussed. Native and adopted plants are included and studies on using these plants as a source of chemicals and materials for industrial applications, polymer synthesis, medicinal use and in chemical research are discussed. The main aim of the Review is to highlight the principal Brazilian agricultural resources; such as sugarcane, oranges and soybean, as well as secondary resources, such as andiroba brazil nut, buriti and others, which should be explored further for scientific and technological applications. Furthermore, vegetable oils, carbohydrates (starch, cellulose, hemicellulose, lignocellulose and pectin), flavones and essential oils are described as well as their potential applications.

Zeolite-mediated production of cyclic organic carbonates: reaction of CO2 with styrene oxide on zeolite Y impregnated with metal halides

Zeolites impregnated with metal halides as efficient catalysts for cyclic organic carbonate production.

The charge-assisted hydrogen-bonded organic framework (CAHOF) self-assembled from the conjugated acid of tetrakis(4-aminophenyl)methane and 2,6-naphthalenedisulfonate as a new class of recyclable Brønsted acid catalysts

The acid-base neutralization reaction of commercially available disodium 2,6-naphthalenedisulfonate (NDS, 2 equivalents) and the tetrahydrochloride salt of tetrakis(4-aminophenyl)methane (TAPM, 1 equivalent) in water gave a novel three-dimensional charge-assisted hydrogen-bonded framework (CAHOF, F-1). The framework F-1 was characterized by X-ray diffraction, TGA, elemental analysis, and ¹H NMR spectroscopy. The framework was supported by hydrogen bonds between the sulfonate anions and the ammonium cations of NDS and protonated TAPM moieties, respectively. The CAHOF material functioned as a new type of catalytically active Brønsted acid in a series of reactions, including the ring opening of epoxides by water and alcohols. A Diels-Alder reaction between cyclopentadiene and methyl vinyl ketone was also catalyzed by F-1 in heptane. Depending on the polarity of the solvent mixture, the CAHOF F-1 could function as a purely heterogeneous catalyst or partly dissociate, providing some dissolved F-1 as the real catalyst. In all cases, the catalyst could easily be recovered and recycled.

Unprecedented reductive cyclisation of salophen ligands to tetrahydroquinoxalines during metal complex formation

The synthesis of novel tetrahydroquinoxalines by a metal induced one-electron reductive cyclisation of salophen ligands was found to occur when a salophen ligand was treated with chromium(ii) chloride or decamethylcobaltocene.

Investigation of Parameters that Affect Resin Swelling in Green Solvents

The influence of various physical and chemical factors on the swelling of polystyrene and PEG based resins in greener organic solvents has been systematically investigated. In general, chemical factors: the nature of the functionality/linker and the degree of loading were found to have a far larger influence on the swelling of the resins than physical parameters such as bead size. The results are interpreted in terms of Hansen solubility parameters for the solvents and there is evidence that some solvents interact with the polymeric core of a resin whilst others interact with the functionality. The results are extended to a study of the changes in resin swelling observed during both deprotection and chain elongation reactions during solid phase peptide synthesis.

Electrical stimulation extends the time limits for very fast chilling of lamb loins

Context Very fast chilling (VFC) involves cooling meat to approximately –1°C before the onset of rigor, and offers potential benefits compared with conventional chilling that include accelerated tenderisation, improved shelf life and reduced inventory costs. However, the practical difficulties of achieving the required temperature profile prevents adoption of VFC commercially. Aims The objective of this study was to determine if electrical stimulation could be a way of making VFC easier to achieve for lamb meat. The hypothesis tested was that electrical stimulation would reduce the rate of chilling required with very fast chilling by accelerating the rate of pH decline post-mortem. Methods The experiment was a 2 × 3 factorial design whereby 54 loins from 27 lambs were allocated to one of six different treatments: no electrical stimulation and electrical stimulation, and chilling rates to reach −1°C at 1 h (Fast), 1.5 h (Moderate) and 2.5 h (Slow) post-mortem respectively. Key results Without electrical stimulation, shear forces were lowest for the Moderate chilling rate; but with electrical stimulation, consistently low shear force values were obtained with all chilling rates. Muscle pH depended on treatment, although this effect also depended on the time post-mortem. Shear force depended on chilling rate only when there was no electrical stimulation. Without electrical stimulation, the optimal chilling rate was the Moderate treatment. Effects on sarcomere length accounted for some, but not all, of the effects of treatment on shear force. Conclusions Electrical stimulation therefore reduced the chilling rate required to optimise tenderness with VFC, and could be a component of a practical VFC regime for lamb meat. Implications VFC could become a practical chilling method, but only when sensory evaluation supports the favourable shear force findings established in this study. This would require evaluation of VFC at a commercial scale.

Facile preparation of polycarbonates from bio-based eugenol and 2-methoxy-4-vinylphenol

Polymerization of α,ω-diene functionalized carbonate monomers prepared from bio-based eugenol and 2-methoxy-4-vinylphenol through thiol–ene click and ADMET polymerizations produced polycarbonates with moderate molecular weight satisfactory thermal properties.

Synthesis of Oxazolidinones by using Carbon Dioxide as a C1 Building Block and an Aluminium-Based Catalyst

Oxazolidinone synthesis through the coupling of carbon dioxide and aziridines was catalysed by an aluminium(salphen) complex at 50-100 °C and 1-10 bar pressure under solvent-free conditions. The process was applicable to a variety of substituted aziridines, giving products with high regioselectivity. It involved the use of a sustainable and reusable aluminium-based catalyst, used carbon dioxide as a C₁ source and provided access to pharmaceutically important oxazolidinones as illustrated by a total synthesis of toloxatone. This protocol was scalable, and the catalyst could be recovered and reused. A catalytic cycle was proposed based on stereochemical, kinetic and Hammett studies.

Rapid Ring-Opening Metathesis Polymerization of Monomers Obtained from Biomass-Derived Furfuryl Amines and Maleic Anhydride

Well-controlled and extremely rapid ring-opening metathesis polymerization of unusual oxanorbornene lactam esters by Grubbs third-generation catalyst is used to prepare a range of bio-based homo- and copolymers. Bio-derived oxanorbornene lactam monomers were prepared at room temperature from maleic anhydride and secondary furfuryl amines by using a 100 % atom economical, tandem Diels-Alder lactamization reaction, followed by esterification. Several of the resulting homo- and copolymers show good control over polymer molecular weight and have narrow molecular weight distributions.

Across the Board: Michael North on Carbon Dioxide Biorefinery

In this series of articles, the board members of ChemSusChem discuss recent research articles that they consider of exceptional quality and importance for sustainability. This entry features Prof. M. North, who introduces the concept of a carbon dioxide biorefinery as a way of making carbon dioxide utilisation both environmentally beneficial and financially attractive and discusses the state of the art for carbon dioxide utilisation for fuels and bulk chemicals.

Laminaria digitata and Palmaria palmata Seaweeds as Natural Source of Catalysts for the Cycloaddition of CO₂ to Epoxides

Seaweed powder has been found to act as an effective catalyst for the fixation of CO₂ into epoxides to generate cyclic carbonates under solvent free conditions. Model background reactions were performed using metal halides and amino acids typically found in common seaweeds which showed potassium iodide (KI) to be the most active. The efficacy of the seaweed catalysts kelp (Laminaria digitata) and dulse (Palmaria palmata) was probed based on particle size, showing that kelp possessed greater catalytic ability, achieving a maximum conversion and selectivity of 63.7% to styrene carbonate using a kelp loading of 80% by weight with respect to epoxide, 40 bar of CO₂, 120 °C for 3 h. Maximizing selectivity was difficult due to the generation of diol side product from residual H₂O found in kelp, along with a chlorinated by-product thought to form due to a high quantity of chloride salts in the seaweeds. Data showed there was loss of organic matter upon use of the kelp catalyst, likely due to the breakdown of organic compounds and their subsequent removal during product extraction. This was highlighted as the likely cause of loss of catalytic activity upon reuse of the Kelp catalyst.

Exploring the scope of capacitance-assisted electrochemical carbon dioxide capture

Optimisation of a capacitance-assisted electrochemical carbon-capture process is facilitated by the physical separation of the graphite and aluminium anode electrodes. This facilitates graphite electrode recycling and enables high current and increased aluminium surface area experiments which fix carbon at a higher rate and the same cell-voltage. Quantification of the H₂ cathode byproduct shows that this process could be a net energy producer if recycled aluminium is used as the sacrificial anode.

Capacitance-Assisted Sustainable Electrochemical Carbon Dioxide Mineralisation

An electrochemical cell comprising a novel dual-component graphite and Earth-crust abundant metal anode, a hydrogen producing cathode and an aqueous sodium chloride electrolyte was constructed and used for carbon dioxide mineralisation. Under an atmosphere of 5 % carbon dioxide in nitrogen, the cell exhibited both capacitive and oxidative electrochemistry at the anode. The graphite acted as a supercapacitive reagent concentrator, pumping carbon dioxide into aqueous solution as hydrogen carbonate. Simultaneous oxidation of the anodic metal generated cations, which reacted with the hydrogen carbonate to give mineralised carbon dioxide. Whilst conventional electrochemical carbon dioxide reduction requires hydrogen, this cell generates hydrogen at the cathode. Carbon capture can be achieved in a highly sustainable manner using scrap metal within the anode, seawater as the electrolyte, an industrially relevant gas stream and a solar panel as an effective zero-carbon energy source.

Vanillin derived a carbonate dialdehyde and a carbonate diol: novel platform monomers for sustainable polymers synthesis

Vanillin has been regarded as one of the important biomass-based platform chemicals for aromatic polymers synthesis. Herein, novel symmetric bis(4-formyl-2-methoxyphenyl)carbonate (BFMC) and bis(4-(hydroxymethyl)-2-methoxyphenyl)carbonate (BHMC) polymeric monomers have been synthesized in high yields using vanillin as a raw chemical, which have been submitted for polymer synthesis via well-established polymeric strategies. A new class of poly(carbonate ester)s oligomers with amide moieties in their side chain can be prepared by using the BFMC as one of monomers via the Passerini three compound reaction (3CR). A new class of poly(carbonate ester)s oligomers and poly(carbonate urethane)s can be prepared via reactions between BHMC with dicarboxylic acid chlorides and diisocyanates, respectively. Their structure have been confirmed by ¹H NMR, ¹³C NMR and FTIR, and the gel permeation chromatograph (GPC) analysis shows that the Mn of poly(carbonate ester)s oligomers ranges from 3100 to 7900 with PDI between 1.31 and 1.65, and the Mn of poly(carbonate urethane)s ranges from 16 400 to 24 400 with PDI ranging from 1.36 to 2.17. The DSC analysis shows that the poly(carbonate ester)s oligomers have relative low T_g ranging from 37.4 to 74.1 °C, and the poly(carbonate urethane)s have T_g ranging from 97.3 to 138.3 °C, mainly correlating to the structure of dicarboxylic acid chlorides and diisocyanates used.

Novel classes of lignin-derived poly(carbonate ester)s, poly(carbonate ester)s pending amide moiety oligomers, and poly(carbonate urethane)s have been designed and synthesized.