Stable Supercapacitors Based on Activated Carbon Prepared from Italian Orange Juice

The development of efficient energy storage systems is critical in the transition towards sustainable energy solutions. In this context, the present work investigates the viability of using orange juice, as a promising and sustainable precursor, for the synthesis of activated carbon electrodes for supercapacitor technologies. Through the carbonization-activation process and controlling the preparation parameters (KOH ratio and activation time), we have tailored the specific surface area (SSA) and pore size distribution (PSD) of the resulting carbon materials-crucial parameters that support supercapacitive performance. Several spectroscopic, morphological, and electrochemical techniques are used to characterize the obtained carbon materials. In particular, our optimization efforts revealed that a 5:1 KOH ratio with an activation time up to 120 min produced the highest SSA of about 2203 m2/g. Employing these optimal conditions, we fabricated symmetric coin cell supercapacitors using Na2SO4 as the electrolyte, which exhibited interesting specific capacitance (~56 F/g). Durability testing over 5000 cycles sustained the durability of the as-made activated carbon electrodes, suggesting an excellent retention of specific capacitance. This study not only advances the field of energy storage by introducing a renewable material for electrode fabrication but also contributes to the broader goal of waste reduction through the repurposing of food byproducts.

Xylanase Production by Solid-State Fermentation for the Extraction of Xylooligosaccharides from Soybean Hulls§

Research background

The development of a novel process for the production of xylooligosaccharides (XOS) based on the 4R concept is made possible by the integration of numerous techniques, especially enzymatic modification together with the physical pretreatment of renewable materials. This study aims to integrate the use of agricultural wastes for the production of xylanase by a new strain of Penicillium sp. and value-added products, XOS.

Experimental approach

For the production of xylanase, a solid-state fermentation was performed using wheat bran as substrate. To obtain the most active crude extract of xylanase, the time frame of cultivation was first adjusted. Then, the downstream process for xylanase purification was developed by combining different membrane separation units with size exclusion chromatography. Further characterisation included determination of the optimal pH and temperature, determination of the molecular mass of the purified xylanase and analysis of kinetic parameters. Subsequently, the hydrolytic ability of the partially purified xylanase in the hydrolysis of alkali-extracted hemicellulose from soybean hulls was investigated.

Results and conclusions

Our results show that Penicillium rubens produced extracellular xylanase at a yield of 21 U/g during solid-state fermentation. Using two ultrafiltration membranes of 10 and 3 kDa in combination with size exclusion chromatography, a yield of 49 % and 13-fold purification of xylanase was achieved. The purified xylanase (35 kDa) cleaved linear bonds β-(1→4) in beechwood xylan at a maximum rate of 0.64 μmol/(min·mg) and a Michaelis constant of 44 mg/mL. At pH=6 and 45 °C, the purified xylanase showed its maximum activity. The xylanase produced showed a high ability to hydrolyse the hemicellulose fraction isolated from soybean hulls, as confirmed by thin-layer chromatography. In the hydrothermally pretreated hemicellulose hydrolysate, the content of XOS with different degrees of polymerisation was detected, while in the non-pretreated hemicellulose hydrolysate, the content of xylotriose and glucose was confirmed.

Novelty and scientific contribution

Future research focusing on the creation of new enzymatic pathways for use in processes to convert renewable materials into value-added products can draw on our findings.

Advances in Nanomaterials Based on Cashew Nut Shell Liquid

Cashew nut shell liquid (CNSL), obtained as a byproduct of the cashew industry, represents an important natural source of phenolic compounds, with important environmental benefits due to the large availability and low cost of the unique renewable starting material, that can be used as an alternative to synthetic substances in many industrial applications. The peculiarity of the functional groups of CNSL components, such as phenolic hydroxyl, the aromatic ring, acid functionality, and unsaturation(s) in the C15 alkyl side chain, permitted the design of interesting nanostructures. Cardanol (CA), anacardic acid (AA), and cardol (CD), opportunely isolated from CNSL, served as building blocks for generating an amazing class of nanomaterials with chemical, physical, and morphological properties that can be tuned in view of their applications, particularly focused on their bioactive properties.

Rigid Polyurethane Foams as Thermal Insulation Material from Novel Suberinic Acid-Based Polyols

Developing polyols from biomass sources contributes to a more circular economy by replacing petroleum-based polyols in the vast production of polyurethanes (PUR). One such potential biomass source could be leftover birch bark from which suberinic acids (SA) can be obtained. The purpose of this study was to identify the best synthesis routes for novel SA-based polyols, obtain rigid PUR foams, and evaluate their competitiveness and potential suitability as thermal insulation material. Novel polyols were synthesized from depolymerized SA by esterification with various functionality and molecular weight alcohols in several molar ratios. The moisture content, hydroxyl and acid values, and apparent viscosity were tested. Free-rise rigid PUR foams from the most suitable SA-based polyol and tall oil-based polyol were successfully prepared, reaching ~20 wt.% total renewable material content in the foam. The obtained rigid PUR foams' morphological, mechanical, and thermal properties were investigated and compared to present foam materials, including commercial foams. The apparent density (~33 kg/m³), as well as the closed cell content (~94%), compression strength (0.25 MPa, parallel to the foaming direction), and thermal conductivity (~0.019 W/(m·K)), approved the competitiveness and potential ability of SA-based rigid PUR foam production as thermal insulation material.

Bio-Inspired Hollow Carbon Microtubes for Multifunctional Photothermal Protective Coatings

Solar energy-facilitated materials are promising to solve energy problems by converting clean solar energy to thermal energy. However, heat loss of photothermal materials still limits the photothermal conversion phenomenon. Herein, we designed bio-inspired hollow carbon microtubes (HCMTs) by one-step carbonization of renewable cotton fibers, which can avoid the complex preparation procedures of the template method. Similar to polar bears, the hollow construction can efficiently reduce heat loss, which improves the utilization of light and photothermal property. The HCMTs can be applied on a variety of substrates to obtain multifunctional photothermal protective coatings. The temperature of the coating can rapidly warm up to 97.7 °C under 1 kW/m² sun irradiation. In addition, the coatings show excellent superhydrophobic property (CA of 161.5 ± 0.9°), which can prevent the adhesion of the contaminant and maintain the long-time photothermal property of the surface. Also, the coating is able to withstand sandpaper abrasion, repeat tape-peeling, and tribological friction without losing superhydrophobic properties, indicating remarkable mechanical stability. Furthermore, the coating can withstand high-temperature calcination (400 °C), long-time UV radiation, and corrosive liquid erosion, which exhibits prominent chemical stability. More importantly, the combination of active deicing and passive anti-icing of the coating can effectively prevent the formation and accumulation of ice on the surface. The outstanding environmental adaptability can greatly extend its lifespan and meet the long-term service conditions.

A New Family of Renewable Thermosets: Kraft Lignin Poly-adipates

Thermosetting polymeric materials have advantageous properties and are therefore used in numerous applications. In this study, it was hypothesized and ultimately shown that thermosets could be derived from comparably sustainable sub-components. A two-step procedure to produce a thermoset comprising of Kraft lignin (KL) and the cross-linker adipic acid (AdA) was developed. The cross-linking was activated by means of an acetylating agent comprising isopropenyl acetate (IPA) to form a cross-linking mixture (CLM). The cross-linking was confirmed by FTIR and solid-state NMR spectroscopy, and the esterification reactions were further studied using model compounds. When the KL lignin was mixed with the CLM, partial esterification occurred to yield a homogeneous viscous liquid that could easily be poured into a mold, as the first step in the procedure. Without any additions, the mold was heated and the material transformed into a thermoset by reaction of the two carboxylic acid-derivatives of AdA and KL in the second step.

Conservation Environments' Effect on the Compressive Strength Behaviour of Wood-Concrete Composites

This paper addresses the issues in making wood-concrete composites more resilient to environmental conditions and to improve their compressive strength. Tests were carried out on cubic specimens of 10 × 10 × 10 cm³ composed of ordinary concrete with a 2% redwood- and hardwood-chip dosage. Superficial treatments of cement and lime were applied to the wood chips. All specimens were kept for 28 days in the open air and for 12 months in: the open air, drinking water, seawater, and an oven. Consequently, the compressive strength of ordinary concrete is approximately 37.1 MPa. After 365 days of exposure to the open air, drinking water, seawater, and the oven, a resistance loss of 35.84, 36.06, 42.85, and 52.30% were observed, respectively. In all environments investigated, the untreated wood composite concrete's resistance decreased significantly, while the cement/lime treatment of the wood enhanced them. However, only 15.5 MPa and 14.6 MPa were attained after the first 28 days in the cases of the redwood and the hardwood treated with lime. These findings indicate that the resistance of wood-concrete composites depends on the type of wood used. Treating wood chips with cement is a potential method for making these materials resistant in conservation situations determined by the cement's chemical composition. The current study has implications for researchers and practitioners for further understanding the impact of these eco-friendly concretes in the construction industry.

Fuelling the future of sustainable sugar fermentation across generations

Biomanufacturing in the form of industrial sugar fermentation is moving beyond pharmaceuticals and biofuels into chemicals, materials, and food ingredients. As the production scale of these increasingly consumer-facing applications expands over the next decades, considerations regarding the environmental impact of the renewable biomass feedstocks used to extract fermentable sugars will become more important. Sugars derived from first-generation biomass in the form of, for example, corn and sugarcane are easily accessible and support high-yield fermentation processes, but are associated with the environmental impacts of industrial agriculture, land use, and competition with other applications in food and feed. Fermentable sugars can also be extracted from second- and third-generation feedstocks in the form of lignocellulose and macroalgae, respectively, potentially overcoming some of these concerns. Doing so, however, comes with various challenges, including the need for more extensive pretreatment processes and the fermentation of mixed and unconventional sugars. In this review, we provide a broad overview of these three generations of biomass feedstocks, outlining their challenges and prospects for fuelling the industrial fermentation industry throughout the 21st century.

Production and Physical-Mechanical Characterization of Peat Moss (Sphagnum) Insulation Panels

Peat moss (sphagnum) is a commonly used sealant, fill, and insulation material in the past. During the efforts to rewet drained moors due to ecological considerations, the technical use of peat moss (sphagnum farming) again became the focus of attention. In the framework of this investigation, insulation panels consisting of peat moss, bound with urea formaldehyde, were produced. Panels manufactured in a wet process and mats bound with textiles were also fabricated. The specimens’ thermal conductivity, water vapor diffusion resistance, modulus of rupture, modulus of elasticity, internal bond, compression resistance, water absorption, and thickness swelling were measured. Physical–mechanical properties were adequate with the resin-bound panels, but not with wet process panels. Moss mats had good characteristics for cavity insulation purposes. The thermal conductivity of the moss panels and mats was found to be lowest with a density of 50 kg/m³, accounting for 0.04 W/m·K. The results show that peat moss is a promising resource for production insulation panels, because their thermal conductivity and mechanical stability are comparable to other insulation materials.

Autogenous Cross-Linking of Recycled Keratin from Poultry-Feather Waste to Hydrogels for Plant-Growth Media

The global rise in atmospheric temperature is leading to an increasing spread of semi-arid and arid regions and is accompanied by a deterioration of arable land. Polymers can help in a number of ways, but they must not be a burden to the environment. In this context, we present herein a method by which goose feathers, representative of keratin waste in general, can be transformed into hydrogels for use as a plant growth medium. The treatment of shredded feathers in Na₂S solution at ambient conditions dissolves approx. 80% of the keratin within 30 min. During evaporation, the thiol groups of cysteine reoxidise to disulphide bridges. Additionally, the protein chains form β-sheets. Both act as cross-links that enables the formation of gels. The drying conditions were found to be crucial as slower evaporation affords gels with higher degrees of swelling at the cost of reduced gel yields. The cress germination test indicated the absence of toxic substances in the gel, which strongly adheres to the roots. Thereby, the plants are protected from drought stress as long as the gel still contains moisture.

Opportunities for the Use of Brazilian Biomass to Produce Renewable Chemicals and Materials

This Review highlights the principal crops of Brazil and how their harvest waste can be used in the chemicals and materials industries. The Review covers various plants; with grains, fruits, trees and nuts all being discussed. Native and adopted plants are included and studies on using these plants as a source of chemicals and materials for industrial applications, polymer synthesis, medicinal use and in chemical research are discussed. The main aim of the Review is to highlight the principal Brazilian agricultural resources; such as sugarcane, oranges and soybean, as well as secondary resources, such as andiroba brazil nut, buriti and others, which should be explored further for scientific and technological applications. Furthermore, vegetable oils, carbohydrates (starch, cellulose, hemicellulose, lignocellulose and pectin), flavones and essential oils are described as well as their potential applications.

Suitability and Modification of Different Renewable Materials as Feedstock for Sustainable Flame Retardants

Due to their chemical structure, conventional flame retardants are often toxic, barely biodegradable and consequently neither healthy nor environmentally friendly. Their use is therefore increasingly limited by regulations. For this reason, research on innovative flame retardants based on sustainable materials is the main focus of this work. Wheat starch, wheat protein, xylan and tannin were modified with phosphate salts in molten urea. The functionalization leads to the incorporation of phosphates (up to 48 wt.%) and nitrogen (up to 22 wt.%). The derivatives were applied on wood fibers and tested as flame retardants. The results indicate that these modified biopolymers can provide the same flame-retardant performances as commercial compounds currently used in the wood fiber industry. Besides, the flame retardancy smoldering effects may also be reduced compared to unmodified wood fibers depending on the used biopolymer. These results show that different biopolymers modified in phosphate/urea systems are a serious alternative to conventional flame retardants.

Renewable Polysaccharides Micro/Nanostructures for Food and Cosmetic Applications

The worldwide diffusion of nanotechnologies into products nowadays has completely revolutionized human life, providing novel comfort and benefits. Their inclusion in food and cosmetic has a heavy impact over the market, allowing the development of higher value products with enhanced properties. Natural origin polymers and in particular polysaccharides represent a versatile platform of materials for the development of micro/nanostructured additives for food and cosmetic products due to their chemical versatility, biocompatibility, and abundance. Here, we review the current applications of polysaccharides-based micro/nanostructures, taking into consideration the precursors' production, isolation, and extraction methods and highlighting the advantages, possible drawbacks, and market diffusion.

Controlled Natural Biomass Deoxygenation Allows the Design of Reusable Hot-Melt Adhesives Acting in a Multiple Oxygen Binding Mode

The present article describes a conceptual view on the design of reusable bioderived high-value-added materials. The translation of a highly complex irregular structure of natural biopolymer into a well-defined hierarchically organized molecular chain led to the discovery of unique adhesive properties enhanced by a novel multiple binding effect. For practical applications, biomass-derived furanic polyesters were found as reusable thermoplastic adhesives. Examined poly(ethylene-2,5-furandicarboxylate) (PEF) and poly(hexamethylene-2,5-furandicarboxylate) (PHF) showed strong adhesion to aluminum in single-lap shear tests (1.47 ± 0.1 and 1.18 ± 0.1 kN/cm², respectively). After the separation, the joints could be easily restored by reheating of the metal parts. Three consecutive cycles of regluing were successfully performed without a significant drop in the adhesive strength. Strong adhesion of the biomass-derived polymers to glass surfaces was also observed (0.93 ± 0.11 kN/cm² for PEF and 0.84 ± 0.06 kN/cm² for PHF). An in-depth study of the surfaces after the shear tests, carried out by means of scanning electron microscopy, revealed predominantly cohesive failure in the case of aluminum samples and adhesive failure in the case of glass samples. Computational modeling revealed a multiple oxygen binding mode for the interaction of furanic polyester molecules with the glass surface and metal atoms. Only sustainable materials were used as a carbon source for the production of target polymers, which showed excellent compatibility with the practically most demanding constructing materials (a universal reusable hot-melt adhesive for copper, brass, Be-copper, Mn-bronze, zinc, aluminum, titanium, and glass).

A Sodium-Ion Battery Separator with Reversible Voltage Response Based on Water-Soluble Cellulose Derivatives

The development of efficient, safe, and environmentally friendly energy storage systems plays a pivotal role in moving toward a more sustainable society. Sodium-ion batteries (NIBs) have garnered considerable interest in grid energy storage applications because of the abundance of sodium, low cost, and suitable redox potential. However, NIB technology is still in its infancy, especially with regard to separators. Here we develop a novel separator based on renewable water-soluble cellulose derivatives. Carboxymethyl cellulose (CMC) and hydroxyethyl cellulose (HEC) are cross-linked to afford large-specific-surface-area membranes upon nonsolvent-induced phase separation (NIPS). Long-term galvanostatic cycling in a symmetric Na/Na cell configuration shows an impressive reversible voltage response with a square wave shape of the polarization even after 250 h of cycling, indicating remarkably stable Na plating and stripping with Na dendrite growth suppression. This novel membrane is evaluated as a separator in Na₃V₂(PO₄)₃/Na half-cells. After 10 cycles at C/10, the cellulosic separator delivers a capacity of 74 mA·h·g^-1 with a 100% Coulombic efficiency compared to that of 61 mA·h·g^-1 and 96% obtained for Whatman GF/D as a commercially available separator. Our work provides novel cues for the development of biomass-derived porous membranes to function as battery separators, surpassing the performance of commercially available separators based on fossil resources in terms of capacity retention, Coulombic efficiency, homogeneous plating/stripping of Na, and dendrite growth suppression. These separators, which may be extended to other battery systems, are expected to play a significant role in developing sustainable energy storage systems.

Postponement growth and antioxidative response of Brassica nigra on CuO and ZnO nanoparticles exposure under soil conditions

Due to unique physiochemical properties, nanoparticles (NPs) have acquired substantial attention in the field of research. However, threats of ecotoxicity and phytotoxicity have limited their biological applications. In this study in vivo experiments were performed to determine the effect of CuO (12.5, 25 and 50 mg/kg) and ZnO (200, 400 and 600 mg/kg) NPs on growth, and antioxidant activities of Brassica nigra. The results showed that CuO NPs did not affect the seed germination while presence of ZnO NPs in the soil generated an inhibitory effect. Both CuO and ZnO NPs positively influenced the growth of stem and other physiological parameters i.e. stem height increased (23%) at 50 mg/kg CuO while root length decreased (up to 44%) with an increase in the concentration of NPs. Phytochemical screening of apical, middle and basal leaves showed elevated phenolic and flavonoid contents in the range of 15.3-59 μg Gallic Acid Equivalent (GAE)/mg Dry Weight (DW) and 10-35 μg Querceitin Equivalent (QE)/mg DW, respectively, in NPs-treated plants. Antioxidant activity was higher in CuO NPs-treated plants as compared to ZnO and control plants. Results conclude that CuO and ZnO NPs at low concentrations can be exploited as nanofertilisers in agriculture fields.

Field-Assisted Alignment of Cellulose Nanofibrils in a Continuous Flow-Focusing System

The continuous production of macroscale filaments of 17 μm in diameter comprising aligned TEMPO-oxidized cellulose nanofibrils (CNFs) is conducted using a field-assisted flow-focusing process. The effect of an AC external field on the material's structure becomes significant at a certain voltage, beyond which augmentations of the CNF orientation factor up to 16% are obtained. Results indicate that the electric field significantly contributes to improve the CNF ordering in the bulk, while the CNF alignment on the filament surface is only slightly affected by the applied voltage. X-ray diffraction shows that CNFs are densely packed anisotropically in the plane parallel to the filament axis without any preferential out of plane orientation. The improved nanoscale ordering combined with the tight CNF packing yields impressive enhancements in mechanical properties, with stiffness up to 25 GPa and more than 63% (up to 260 MPa), 46% (up to 2.8%), and 120% (up to 4.7 kJ/m³) increase in tensile strength, strain-to-failure, and toughness, respectively. This study demonstrates for the first time the control over the structural ordering of anisotropic nanoparticles in a dynamic system using an electric field, which can have important implications for the development of sustainable alternatives to synthetic textiles.

"Waste to Wealth": Lignin as a Renewable Building Block for Energy Harvesting/Storage and Environmental Remediation

Lignin is the second most earth-abundant biopolymer having aromatic unit structures, but it has received less attention than other natural biomaterials. Recent advances in the development of lignin-based materials, such as mesoporous carbon, flexible thin films, and fiber matrix, have found their way into applications to photovoltaic devices, energy-storage systems, mechanical energy harvesters, and catalytic components. In this Review, we summarize and suggest another dimension of lignin valorization as a building block for the synthesis of functional materials in the fields of energy and environmental applications. We cover lignin-based materials in the photovoltaic and artificial photosynthesis for solar energy conversion applications. The most recent technological evolution in lignin-based triboelectric nanogenerators is summarized from its fundamental properties to practical implementations. Lignin-derived catalysts for solar-to-heat conversion and oxygen reduction are discussed. For energy-storage applications, we describe the utilization of lignin-based materials in lithium-ion rechargeable batteries and supercapacitors (e.g., electrodes, binders, and separators). We also summarize the use of lignin-based materials as heavy-metal adsorbents for environmental remediation. This Review paves the way to future potentials and opportunities of lignin as a renewable material for energy and environmental applications.

Amalgamation and application of nano chitosan cross-linked with fish scales based activated carbon as an adsorbent for the removal of reactive dye (RB9)

The extensive discomfort in the expulsion of toxic pollutants even at mild concentrations has demanded the need for prompt methods for the evacuation of dyes and heavy metals. The effective method for depuration of dye from the effluent is by sorption. Chitosan is a bio-polymer which is gaining an increasing interest as one of the sorbents. It was obtained from the crab shells by undergoing several chemical processes and used as an adsorbent for dye, metal removal and also for pharmaceutical purposes. Cross linking it with other co polymers will increase the capacity of adsorption to a maximum level. Fish scales are considered to be a major waste in the food industry and since it takes a long time for decomposing it is considered to be one of the pollutants. Hence it is utilised by converting it into activated carbon by preliminary treatment and into a muffle furnace. The obtained activated carbon is combined with chitosan by using a cross linker and utilised for adsorption mechanism. To analyse the effect of chitosan cross linked with activated carbon obtained from fish scales in adsorption of dye Reactive Blue 9 (RB9) to evaluate the adsorption studies, kinetics, mass transfer studies, thermodynamics of the bio adsorbent.

Fracture Properties Evaluation of Cellulose Nanocrystals Cement Paste

Due to the need for high-performance and sustainable building materials, the investigation of the determination of fracture toughness of cement paste using new and sustainable materials, such as cellulose nanocrystals (CNCs) is worthwhile. Contrary to other well-known nano-reinforcement particles, such as carbon nanotubes, CNCs are less toxic; therefore, they have less safety and environmental risks. Fracture behavior of cement paste has been studied intensively for a long time. However, the incorporation of new materials in the cement paste, such as cellulose nanocrystal materials (CNCs), has not been fully investigated. In this paper, the fracture behavior, compressive strength, and hydration properties of cement paste reinforced with cellulose nanocrystal particles were studied. At the age of 3, 7, and 28 days, a three-point bending moment test, and a calorimetry and thermogravimetric analysis, scanning electron microscopy (SEM), and energy dispersive x-ray spectroscopy (EDX) analysis were performed on the water-to-binder-weight ratio of 0.35 cement paste, containing 0.0%, 0.2%, and 1.0% volume cellulose nanocrystals. Results indicated that the fracture properties and compressive strength were improved for the sample containing 0.2% CNCs. Preliminary results indicate that CNCs can improve the fracture behavior of cementitious materials and can be considered as a renewable and sustainable material in construction.

Cellulose Nanocrystal and Water-Soluble Cellulose Derivative Based Electromechanical Bending Actuators

This study reports a versatile method for the development of cellulose nanocrystals (CNCs) and water-soluble cellulose derivatives (methyl cellulose (MC), hydroxypropyl cellulose (HPC), and sodium carboxymethyl cellulose (NaCMC)) films comprising the ionic liquid (IL) 2-hydroxy-ethyl-trimethylammonium dihydrogen phosphate ([Ch][DHP]) for actuator fabrication. The influence of the IL content on the morphology and physico–chemical properties of free-standing composite films was evaluated. Independently of the cellulose derivative, the ductility of the films increases upon [Ch][DHP] incorporation to yield elongation at break values of nearly 15%. An increase on the electrical conductivity as a result of the IL incorporation into cellulosic matrices is found. The actuator performance of composites was evaluated, NaCMC/[Ch][DHP] showing the maximum displacement along the x-axis of 9 mm at 8 Vpp. Based on the obtained high electromechanical actuation performance, together with their simple processability and renewable nature, the materials fabricated here represent a step forward in the development of sustainable soft actuators of high practical relevance.

Biomass Juncus Derived Nitrogen-Doped Porous Carbon Materials for Supercapacitor and Oxygen Reduction Reaction

Juncus is a perennial herb aquatic plant found worldwide, with high reproductive ability in warm regions. It has three-dimensional hierarchical porous triangular networks structures composited of tubular fibers. Here, juncus derived nitrogen-doped porous carbon (NDPC) was prepared by mixing juncus and ZnCl₂ through one-step pyrolysis and activation which is a low-cost, simple, and environmentally friendly method. The NDPC had hierarchical porous structures and a high specific surface area and was applied for supercapacitor and oxygen reduction reaction (ORR). The resulted NDPC-3-800 was prepared by mixing juncus with ZnCl₂ at a mass ratio of 1:3 and then carbonized at 800°C, it was used as electrode material of a supercapacitor. The supercapacitor exhibited excellent specific capacitance of 290.5 F g⁻¹ and 175.0 F g⁻¹ in alkaline electrolyte at the current densities of 0.5 A g⁻¹ and 50 A g⁻¹, respectively. The supercapacitor showed good cycle stability, and the capacitance was maintained at 94.5% after 10,000 cycles. The NDPC-5-800 was prepared by mixing juncus with ZnCl₂ at a mass ratio of 1:5 and then carbonized at 800°C. It exhibited outstanding ORR catalytic activity and stability attributing to their high specific surface area and abundant actives sites. The juncus can derive various materials for application in different fields.

Rigid Polyurethane Foams with Various Isocyanate Indices Based on Polyols from Rapeseed Oil and Waste PET

Developing polyols derived from natural sources and recycling materials attracts great interest for use in replacing petroleum-based polyols in polyurethane production. In this study, rigid polyurethane (PUR) foams with various isocyanate indices were obtained from polyols based on rapeseed oil and polyethylene terephthalate (RO/PET). The various properties of the prepared PUR foams were investigated, and the effect of the isocyanate index was evaluated. The closed-cell content and water absorption were not impacted by the change of the isocyanate index. The most significant effect of increasing the isocyanate index was on the dimensional stability of the resulting foams. This is due to the increased crosslink density, as evidenced by the increased formation of isocyanurate and increase of the glass transition temperature. Additionally, the influence on compression strength, modulus, and long-term thermal conductivity were evaluated and compared with reference PUR foams from commercially available polyols. Rigid PUR foams from RO/PET polyol were found to be competitive with reference materials and could be used as thermal insulation material.

Multiwalled Carbon Nanotube Reinforced Bio-Based Benzoxazine/Epoxy Composites with NIR-Laser Stimulated Shape Memory Effects

Smart materials with light-actuated shape memory effects are developed from renewable resources in this work. Bio-based benzoxazine resin is prepared from vanillin, furfurylamine, and paraformaldehyde by utilizing the Mannich-like condensation. Vanillin-furfurylamine-containing benzoxazine resin (V-fa) is subsequently copolymerized with epoxidized castor oil (ECO). When the copolymer is reinforced with multiwalled carbon nanotubes (MWCNTs), the resulting composite exhibits shape memory effects. Molecular characteristics of V-fa resin, ECO, and V-fa/ECO copolymers are obtained from Fourier transform infrared (FT-IR) spectroscopy. Curing behavior of V-fa/ECO copolymers is investigated by differential scanning calorimetry. Dynamic mechanical properties of MWCNT reinforced V-fa/ECO composites are determined by dynamic mechanical analysis. Morphological details and distribution of MWCNTs within the copolymer matrix are characterized by transmission electron microscopy. Shape memory performances of MWCNT reinforced V-fa/ECO composites are studied by shape memory tests performed with a universal testing machine. After a significant deformation to a temporary shape, the composites can be recovered to the original shape by near-infrared (NIR) laser actuation. The shape recovery process can be stimulated at a specific site of the composite simply by focusing NIR laser to that site. The shape recovery time of the composites under NIR actuation is four times faster than the shape recovery process under conventional thermal activation. Furthermore, the composites possess good shape fixity and good shape recovery under NIR actuation.

Oil Palm Biomass Biorefinery for Sustainable Production of Renewable Materials

Oil palm biomass is widely known for its potential as a renewable resource for various value-added products due to its lignocellulosic content and availability. Oil palm biomass biorefinery is an industry that comes with sociopolitical benefits through job opportunities, as well as potential environmental benefits. Many studies have been conducted on the technological advancements of oil-palm biomass-derived renewable materials, which are discussed comprehensively in this review. Recent technological developments have made it possible to bring new and innovative technologies to commercialization, such as compost, biocharcoal, biocomposites, and bioplastics.

Comparative antileishmanial efficacy of the biosynthesised ZnO NPs from genus Verbena

This study describes ZnO NPs biosynthesis using leaf extracts of Verbena officinalis and Verbena tenuisecta. The extracts serve as natural reducing, capping and stabilization facilitators. Plant extracts phytochemical analysis, revealed that V. officinalis showed higher total phenolic and flavonoid content (22.12 and 6.38 mg g -1 DW) as compared to V. tennuisecta (12.18 and 2.7 mg g -1 DW). ZnO NPs were characterised by ultraviolet-visible spectroscopy, Fourier transform infrared, X-ray diffraction, scanning electron microscope, transmission electron microscopy (TEM) and energy dispersive X-ray. TEM analysis of ZnO NPs reveals rod and flower shapes and were in the range of 65-75 and 14-31 nm, for V. tenuisecta and V. officinalis, respectively. Bio-potential of ZnO NPs was examined through their leishmanicidal potential against Leishmania tropica. ZnO NPs showed potent leishmanicidal activity with 250 µg ml-1 being the most potent concentration. V. officinalis mediated ZnO NPs showed more potent leishmanicidal activity compared to V. tenuisecta mediated ZnO NPs due to their smaller size and increased phenolics doped onto its surface. These results can be a step forward towards the development of novel compounds that can efficiently replace the current medication schemes for leishmaniasis treatment.

Effects of Fe/SDS and Au nanoparticles on P. aeruginosa bacterial growth and biosurfactant production

The aim of this study was to evaluate the effects of iron (Fe)/SDS and gold (Au) nanoparticles on growth and biosurfactant production of Pseudomonas aeruginosa PBCC5. The concentrations of the nanoparticles used were 1, 500 and 1000 mg/l. In this research, the surface tension of biosurfactant, dry weight of biosurfactant and biomass, emulsification indexes (E24) were measured and transmission electron microscopy analysis was used to monitor the nanoparticles. The test results showed that the effect of nanoparticles on the bacterial growth and biosurfactant production varied corresponding to the type and concentration of nanoparticles. Fe/SDS nanoparticles showed no bacterial toxicity when the concentration of nanoparticles was 1 mg/ml and increased the growth and biosurfactant production, 23.21 and 20.73%, respectively. While at higher concentrations (500, 1000 mg/l), the nanoparticles suppressed bacterial growth as well as biosurfactant production. Similarly, Au nanoparticles had no bacterial toxicity and also increased bacterial growth and biosurfactant production. The surface tensions of all samples decreased from 72 of distiled water to 32-35 mN/m.

Porous Zirconium-Furandicarboxylate Microspheres for Efficient Redox Conversion of Biofuranics

Biofuranic compounds, typically derived from C₅ and C₆ carbohydrates, have been extensively studied as promising alternatives to chemicals based on fossil resources. The present work reports the simple assembly of biobased 2,5-furandicarboxylic acid (FDCA) with different metal ions to prepare a range of metal-FDCA hybrids under hydrothermal conditions. The hybrid materials were demonstrated to have porous structure and acid-base bifunctionality. Zr-FDCA-T, in particular, showed a microspheric structure, high thermostability (ca. 400 °C), average pore diameters of approximately 4.7 nm, large density, moderate strength of Lewis-base/acid centers (ca. 1.4 mmol g^-1 ), and a small number of Brønsted-acid sites. This material afforded almost quantitative yields of biofuranic alcohols from the corresponding aldehydes under mild conditions through catalytic transfer hydrogenation (CTH). Isotopic ¹ H NMR spectroscopy and kinetic studies verified that direct hydride transfer was the dominant pathway and rate-determining step of the CTH. Importantly, the Zr-FDCA-T microspheres could be recycled with no decrease in catalytic performance and little leaching of active sites. Moreover, good yields of C₅ (i.e., furfural) or C₄ products [i.e., maleic acid and 2(5H)-furanone] could be obtained from furfuryl alcohol without oxidation of the furan ring over these metal-FDCA hybrids. The content and ratio of Lewis-acid/base sites were demonstrated to dominantly affect the catalytic performance of these redox reactions.

Sustainable Materials for Sustainable Energy Storage: Organic Na Electrodes

In this review, we summarize research efforts to realize Na-based organic materials for novel battery chemistries. Na is a more abundant element than Li, thereby contributing to less costly materials with limited to no geopolitical constraints while organic electrode materials harvested from biomass resources provide the possibility of achieving renewable battery components with low environmental impact during processing and recycling. Together, this can form the basis for truly sustainable electrochemical energy storage. We explore the efforts made on electrode materials of organic salts, primarily carbonyl compounds but also Schiff bases, unsaturated compounds, nitroxides and polymers. Moreover, sodiated carbonaceous materials derived from biomasses and waste products are surveyed. As a conclusion to the review, some shortcomings of the currently investigated materials are highlighted together with the major limitations for future development in this field. Finally, routes to move forward in this direction are suggested.

Extracellular synthesis gold nanotriangles using biomass of Streptomyces microflavus

Applications of nanotechnology and nano-science have ever-expanding breakthroughs in medicine, agriculture and industries in recent years; therefore, synthesis of metals nanoparticle (NP) has special significance. Synthesis of NPs by chemical methods are long, costly and hazardous for environment so biosynthesis has been developing interest for researchers. In this regard, the extracellular biosynthesis of gold nanotriangles (AuNTs) performed by use of the soil Streptomycetes. Streptomycetes isolated from rice fields of Guilan Province, Iran, showed biosynthetic activity for producing AuNTs via in vitro experiments. Among all 15 Streptomyces spp. isolates, isolate No. 5 showed high biosynthesis activity. To determine the bacterium taxonomical identity at genus level, its colonies characterised morphologically by use of scanning electron microscope. The polymerase chain reaction (PCR) molecular analysis of active isolate represented its identity partially. In this regard, 16S rRNA gene of the isolate was amplified using universal bacterial primers FD1 and RP2. The PCR products were purified and sequenced. Sequence analysis of 16S rDNA was then conducted using National Center for Biotechnology Information Basic Local Alignment Search Tool method. The AuNTs obtained were characterised by ultraviolet-visible spectroscopy, atomic force microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction spectroscopy analyses. The authors results indicated that Streptomyces microflavus isolate 5 bio-synthesises extracellular AuNTs in the range of 10-100 nm. Synthesised SNPs size ranged from 10 to 100 nm. In comparison with chemical methods for synthesis of metal NPs, the biosynthesis of AuNTs by Streptomyces source is a fast, simple and eco-friendly method. The isolate is a good candidate for further investigations to optimise its production efficacy for further industrial goals in biosynthesis of AuNTs.

High capacity, easy release adhesives from renewable materials

Reversible adhesives composed of renewable materials are presented which achieve high force capacities (810 N) while maintaining easy release (∼ 0.25 N) and reusability. These simple, non-tacky adhesives consist of natural rubber impregnated into stiff natural fiber fabrics, including cotton, hemp, and jute. This versatile approach enables a clear method for designs of environmentally-responsible, reversible adhesives for a wide variety of applications.