Direct biodiesel production from wet spent coffee grounds

Controlled crushing device-intensified direct biodiesel production of Black Soldier Fly larvae

Insect larvae contain sufficient oil comparable with oleaginous biomass, and hence have potency as alternative biodiesel resources. The direct transesterification of Black Soldier Fly (BSF) larvae have conducted using a controllable crushing device (CCD) and a homogeneous base as a catalyst. The effect of catalyst concentration (wt.%), ratio BSF larvae to methanol (wt./v), reaction time (min) and rotational speed (rpm) on biodiesel conversion was determined. The maximum conversion of 93.8% was achieved at room temperature after 20 min of reaction time and ratio larvae to methanol of 1:2 (wt./v), catalyst concentration of 7 wt% and rotational speed of 3000 rpm. In addition, the green metrics calculation showed that this method produces less waste and uses less solvent. Some of the BSF-biodiesel properties meet the biodiesel standard. The CCD-intensified the DT of BSF larvae is a promising alternative for green and energy-saved biodiesel production.

A Review of Recent Advances in Spent Coffee Grounds Upcycle Technologies and Practices

Coffee is the world’s second largest beverage only next to water. After coffee consumption, spent coffee grounds (SCGs) are usually thrown away and eventually end up in landfills. In recent years, technologies and policies are actively under development to change this century old practice, and develop SCGs into value added energy and materials. In this paper, technologies and practices are classified into two categories, those reuses SCGs entirely, and those breakdown SCGs and reuse by components. This article provided a brief review of various ways to reuse SCGs published after 2017, and provided more information on SCG quantity, SCG biochar development for pollutant removal and using SCG upcycle cases for education. SCG upcycle efforts align the best with the UN Sustainable Development Goals (SDG) #12 “ensure sustainable consumption and production patterns,” the resultant fuel products contribute to SDG #7 “affordable and clean energy,” and the resultant biochar products contribute to SDG #6, “clean water and sanitation.”

Waste rubber seeds as a renewable energy source: direct biodiesel production using a controlled crushing device

A multistep and high-cost biodiesel production could be simplified using the direct transesterification (DT) method. A controllable device has been developed and applied to study the effects of the ratio of rubber seeds to methanol, catalyst concentration, reaction time and rotational speed on biodiesel conversion and fatty acid (FA) yield extraction. The controllable crushing device (CCD) assisted the DT of rubber seeds and operated at ambient temperature and pressure achieved a maximum biodiesel conversion of 97.5 ± 0.6% in a reaction time of 7 minutes. The biodiesel quality estimated based on the FA extraction profile is comparable with the biodiesel standard. In terms of energy efficiency and reaction time, the CCD saved 71-98% energy consumption and reduced the reaction time up to 99%.

Biodiesel, biogas and fermentable sugars production from Spent coffee Grounds: A cascade biorefinery approach

Spent coffee grounds are rich in high-value compounds, such as saturate and unsaturated fatty acids, and polysaccharides. Therefore, this work investigated a cascade biorefinery to produce: i) biodiesel from coffee oils, ii) cellulose- and hemicellulose-derived fermentable sugars and iii) biomethane from the residual solid fraction after sugars extraction. Transesterification reached the best performances of 86% w/w of fatty acid methyl esters using 1:8 coffee oil/methanol ratio and 2% w/w of KOH as catalyst. The use of glycerol for the pretreatment of spent coffee grounds allowed the internal circulation of a process leftover from transesterification; thus, avoiding the use of clean water. In the best conditions, the total released fermentable sugars were about 40-50% (w/w) on dry weight basis. The low content of easily degradable compounds led to a low methane production of 50 L_CH4/kg_VS, indicating the need to search for better performing alternatives to close the biorefinery loop.

Synthesis of Dietetic Structured Lipids from Spent Coffee Grounds Crude Oil Catalyzed by Commercial Immobilized Lipases and Immobilized Rhizopus oryzae Lipase on Biochar and Hybrid Support

The aim of this study was the valorization of coffee industry residues, namely spent coffee grounds (SCG) as a source of oil, and silverskin (CS) as a source of both oil and biomass, under the concept of the circular economy. Therefore, crude oil from SCG was used to produce low-calorie structured lipids (SL) for food and pharmaceutical industries, and CS to produce biochar by pyrolysis for biotechnological uses. SL were obtained by acidolysis with caprylic or capric acid, or interesterification with ethyl caprylate or ethyl caprate, in solvent-free media, catalyzed by immobilized sn-1,3 regioselective lipases. Silverskin biochar (BIO) was directly used as enzyme carrier or to produce hybrid organic-silica (HB) supports for enzyme immobilization. Rhizopus oryzae lipase (ROL) immobilized on Amberlite (AMB), silica (SIL), BIO or HB, and the commercial immobilized Thermomyces lanuginosus (Lipozyme TL IM) and Rhizomucor miehei (Lipozyme RM IM) lipases were tested. Lipozyme RM IM showed better results in SL production than Lipozyme TLIM or ROL on BIO, SIL or HB. About 90% triacylglycerol conversion was attained after 7 h acidolysis or interesterification. Lipozyme RM IM was more stable in interesterification (80% and 65% activity with ethyl caprylate or ethyl caprate) than in acidolysis (first-order decay) after 10 reuses.

Production of low-calorie structured lipids from spent coffee grounds or olive pomace crude oils catalyzed by immobilized lipase in magnetic nanoparticles

In this study, crude oils extracted from spent coffee grounds (SCG) and olive pomace (OP) were used as raw-material to synthesize low-calorie triacylglycerols, either by acidolysis with capric acid, or by interesterification with ethyl caprate, in solvent-free media, catalyzed by sn-1,3 regioselective lipases. The Rhizopus oryzae lipase (ROL) was immobilized in magnetite nanoparticles (MNP-ROL) and tested as novel biocatalyst. MNP-ROL performance was compared with that of the commercial immobilized Thermomyces lanuginosus lipase (Lipozyme TL IM). For both oils, Lipozyme TL IM preferred interesterification over acidolysis. MNP-ROL catalyzed reactions were faster and acidolysis was preferred with yields of c.a. 50% new triacylglycerols after 3 h acidolysis of OP or SCG oils. MNP-ROL was very stable following the Sadana deactivation model with half-lives of 163 h and 220 h when reused in batch acidolysis and interesterification of OP oil, respectively.