Construction of octenyl succinic anhydride modified porous starch for improving bioaccessibility of β-carotene in emulsions

Chemical CO2 fixation by a heterogenised Zn(ii)-hydrazone complex

A new Zn(ii) coordination compound, [Zn(HL)(OAc)2] (1), with ONN-donor hydrazone ligand (HL = (E)-4-amino-N'-(1-(pyridin-2-yl)ethylidene)benzohydrazide) was synthesized and structurally characterized by using spectroscopic techniques and X-ray analysis. These analyses indicated that the Zn(ii) ion in the resulting coordination compound is five coordinated and the compound has a free amine functionality on the phenyl ring. Thus, [Zn(HL)(OAc)2] (1) was immobilized on the surface of propionylchloride functionalized silica gel through an amidification process via the reaction of the aniline part of compound 1 and the acyl chloride group of the support. The synthesized heterogeneous catalyst, Si-[Zn(HL)(OAc)2], was characterized by several analytical methods and the results confirmed the successful support of 1 on the surface of the support. Si-[Zn(HL)(OAc)2] was used in a chemical CO2 fixation reaction and styrene epoxide was used as a model substrate to investigate the catalytic performance of the supported Zn(ii) catalyst. Si-[Zn(HL)(OAc)2] can efficiently catalyze the formation of cyclic carbonate from the reaction of epoxide and CO2 in the presence of TBAB as a co-catalyst.

OSA modified porous starch acts as an efficient carrier for loading and sustainedly releasing naringin

To select an efficient carrier for loading and sustainedly releasing naringin (NAR), complexes of porous starch (PS) and NAR (PS-NAR) as well as those of octenyl succinic anhydride (OSA) esterified PS and NAR (OSAPS-NAR) with different degree of substitution (DS) were prepared by an ultrasonic method with an ethanol solution. The micro-morphological features, structural and thermal properties of complexes and their constituents were characterized, and in vitro release rate and kinetic of NAR from complexes were investigated. The findings revealed that NAR was successfully loaded in PS/OSAPS in an amorphous form, and the NAR's loading efficiency improved as DS increased, reaching 86.85 % at DS 0.0427. NAR cumulative release rate from the complexes in simulated digestion fluids was much higher than that of free (unloaded) NAR, but decreased as DS increased. NAR's in vitro release from complexes mainly depended on the carrier rather than NAR itself, and OSAPS with higher DS had stronger protection and slower release effect on NAR. The results would provide a new means for starch-based carrier construction to develop an efficient delivery and sustainedly releasing system for NAR, thus broadening the application ranges both for modified starch and citrus flavonoids such as NAR.

The dissolution and bioavailability of curcumin reinforced by loading into porous starch under solvent evaporation

Curcumin is a polyphenol with anti-inflammatory and antitumorigenic properties. However, its low water solubility and bioavailability limit its use. In this study, porous starch supplemented with a solvent evaporation process was demonstrated as a highly loaded vehicle for curcumin (17.82 %) that could be efficiently solubilized over sustained periods. The migration of curcumin and its adsorption onto the surface of porous starch during solvent evaporation indicated that curcumin was deposited as amorphous globules in pores and encapsulated on the starch surface. The process was demonstrated to involve hydrogen bonding and hydrophobic interactions using infrared spectroscopy and particle dissociation experiments. Notably, the saturated solubility of curcumin in CU/PS in ionized water, ethanol, and acetic acid was 17.81×, 31.65×, and 26.53× greater than that of raw curcumin, respectively. In particular, it could slowly dissolve in simulated intestinal fluids and exhibited a higher cumulative dissociation (about 6 times that of raw curcumin). In vitro experiments using a colon adenocarcinoma cell line confirmed that curcumin loaded with porous starch enhanced cellular uptake and reduced IC50 of raw curcumin by 55 times. Thus, porous starch with a simple and efficient process provides new ideas for the design of drug delivery systems and is expected to inspire further development in reducing dosing intervals and maximizing therapeutic efficacy.

Construction and digestive characterization of emulsions stabilized with octenyl succinic anhydride-modified curdlan

To expand the scope of application of the insoluble polysaccharide curdlan (CUR), this study modified CUR with octenyl succinic anhydride (OSA) and evaluated the performance of the emulsion formed from the modified CUR derivative. Fourier transform infrared spectroscopy, differential scanning calorimetry, and X-ray diffraction analysis showed that properties such as the molecular structure, crystallinity, and hydrophobicity of the OSA-modified CUR (COSA) changed significantly compared with those of the original CUR, indicating that the hydroxyl group of CUR was successfully replaced by OSA. Subsequently, a stable oil-in-water emulsion system of COSA loaded with curcumin was established. The stability of the emulsions was evaluated by analyzing their microstructure, rheological properties, and curcumin retention. The digestion characteristics of the emulsions were evaluated by in vitro simulated digestion experiments, and the COSA emulsion had higher stability and was better able to improve the chemical stability of curcumin compared to CUR. The OSA grafting resulted in emulsions with higher curcumin release rates and antioxidant capacities. These results indicate that COSA has the potential to be used as an encapsulating material for lipophilic nutrient emulsions and provides theoretical support for expanding the applications of chemically modified CUR derivatives.

Differential impacts of porous starch versus its octenyl succinic anhydride-modified counterpart on naringin encapsulation, solubilization, and in vitro release

The aim of this work was to evaluate the potentials of porous starch (PS) and its octenyl succinic anhydride modified product (OSAPS) as efficient carriers for loading naringin (NA), focusing on encapsulation efficiency (EE, the percentage of adsorbed naringin relative to its initial amount), drug loading (DL, the percentage of naringin in the complex), structural alterations, solubilization and in vitro release of NA using unmodified starch (UMS) and NA as controls. Both the pore diameter and SBET value of PS decreased after esterification with OSA, and a thinner strip-shaped NA (∼145 nm) was observed in the OSAPS-NA complex and (∼150 nm) in the PS-NA complex. OSAPS exhibited reduced short-range ordered structure, as indicated by a lower R1047/1022 (0.73) compared to PS (0.77). Meanwhile, lowest crystallinity (12.81 %) of NA was found in OSAPS-NA. OSAPS-NA exhibited higher EE and DL for NA than PS-NA and a significant increase in NA saturated solubility in deionized water (by 11.63-fold) and simulated digestive fluids (by 24.95-fold) compared to raw NA. OSAPS contained higher proportions of slowly digestible starch and exhibited a lower digestion rate compared to PS, resulting in a longer time for NA release from its complex during the digestion.

Formation, influencing factors, and applications of internal channels in starch: A review

Starch, a natural polymer, has a complex internal structure. Some starches, such as corn and wheat starches, have well-developed surface pores and internal channels. These channel structures are considered crucial in connecting surface stomata and internal cavities and have adequate space for loading guest molecules. After processing or modification, the starch-containing channel structures can be used for food and drug encapsulation and delivery. This article reviews the formation and determination of starch internal channels, and the influence of different factors (such as starch species and processing conditions) on the channel structure. It also discusses relevant starch preparation methods (physical, chemical, enzymatic, and synergistic), and the encapsulation effect of starch containing internal channels on different substances. In addition, the role of internal channels in regulating the starch digestion rate and other aspects is also discussed here. This review highlights the significant multifunctional applications of starch with a channel structure.

Preparation, characterization and in vitro digestion of octenyl succinic anhydride-modified porous starch with different degrees of substitution

Octenyl succinic anhydride modified porous starch (OSA-PS) with degrees of substitution (DS) from 0.0123 to 0.0427 were prepared by aqueous phase method. From SEM, PS had a porous structure which showed a rough and corrosive surface after esterification with OSA. FT-IR revealed the characteristic peaks of OSA-PS at 1725 cm-1 and 1570 cm-1. From 1H NMR spectra, OSA-PS displayed extra chemical signal peaks at 0.85 ppm, 1.25 ppm and 1.96 ppm. These results fully demonstrated that OSA groups were successfully grafted onto PS. Furthermore, as DS increased, the specific surface area (5.6464 m2/g), pore volume (0.9959 × 10-2 cm3/g) and methylene blue adsorption capacity (24.3962 mg/g) of OSA-PS reached the maximum, while its relative crystallinity (26.8112 %) and maximum thermal decomposition temperature (291.96 °C) were the minimum. In vitro digestion studies showed that with the increase of DS, OSA-PS' contents of rapidly digestible starch and slowly digestible starch decreased from 9.06 % to 6.27 % and 28.38 % to 14.61 %, respectively. In contrast, its resistant starch had an increase in content from 62.56 % to 79.12%. The results provided an effective method for obtaining a double-modified starch with high specific surface area and anti-digestibility, thus broadening the industrial application of starch.

Fabrication and study on dually modified starch embedded in alginate hydrogel as an encapsulation system for Satureja essential oil

This study aimed to investigate how the types and order of modifications influence the structure and physicochemical characteristics of modified porous starch. The work focuses on the encapsulation of essential oil in hydrophobic microcapsules embedded in sodium alginate hydrogels. FTIR spectra indicated successful esterification of starch with OSA. 1047:1022 cm-1 and 1022:995 cm-1 band ratios of FTIR spectra revealed increased crystallinity due to enzymatic modification, supported by XRD patterns. Porous-OSA (PO) starch had 1.5 times higher degree of substitution (DS) than OSA-porous (OP) starch, confirmed by the intense peak at 0.85 ppm in 1H NMR spectra. SEM images displayed larger particles and smaller pore diameter in OP compared to PO and porous starch, indicating amylolytic enzyme inhibition by OSA. Loading efficiency (LE) showed no significant difference between OP and PO microcapsules (≈70 %), both significantly higher other starch microcapsules. OP and PO microcapsules exhibited sustained release, with enhanced antibacterial activity. Alginate hydrogels preserved about 60 % antioxidant and 90 % antibacterial activities of SEO against 2 h of UV radiation. These findings suggest that the order of modification could not affect the functional properties of final microcapsules. Additionally, the importance of alginate hydrogels as the protective and second wall material was disclosed.

Modified porous starch for enhanced properties: Synthesis, characterization and applications

Native starches have low water solubility at room temperature and poor stability, which demand modifications to overcome. Porous starch as a modified one shows enhanced adsorptive efficiency and solubility compared with its native starch. In contrast, some inherent disadvantages exist, such as weak mechanical strength and low thermal resistance. Fortunately, modified porous starches have been developed to perform well in adsorption capacity and stability. Modified porous starch can be prepared by esterification, crosslinking, oxidation and multiple modifications to the porous starch. The characterization of modified porous starch can be achieved through various analytical techniques. Modified porous starch can be utilized as highly efficient adsorbents and encapsulants for various compounds and applied in various fields. This review dealt with the progress in the preparation, structural characterization and application of modified porous starch. The objective is to provide a reference for its development, utilization, and future research directions.

Fabrication of a curcumin encapsulated bioengineered nano-cocktail formulation for stimuli-responsive targeted therapeutic delivery to enhance anti-inflammatory, anti-oxidant, and anti-bacterial properties in sepsis management

This study aimed to fabricate an eco-friendly functionalized chitosan (CS) nanocarrier to establish a pH-responsive drug delivery system for the treatment of sepsis. Curcumin (Cur) and cerium oxide (CeO₂) were loaded onto an octenylsuccinic anhydride (OSA)-functionalized CS nanoformulation (Cur@Ce/OCS) to achieve an effective nanocarrier (NC) for sepsis treatment. The physicochemical characteristics of the developed nanocarriers were determined using various characterization techniques. The developed CeO₂-OCS nanoformulation has been showed effective anti-bacterial activity (∼97%) against G⁺ and G^- bacterial pathogens, and also have improved drug loading (94% ± 2), and encapsulation efficiency (89.8% ± 1.5), with uniform spherical particles having an average diameter of between 100 and 150 nm. The in vivo experimental results establish that Cur-loaded Ce/OCS NPs could have enhanced therapeutic potential against lung infection model by reducing bacterial burden and extensively decreasing inflammatory responses in sepsis model. Additionally, we determined the in vivo biosafety of the nanoformulations by histological observation of different mouse organs (heart, liver, spleen, and kidney), and observed no signs of toxicity in the treatment groups. The findings of this study clearly demonstrate the therapeutic potential of pH-sensitive nanoplatforms in the management of infectious sepsis.

Construction of caffeic acid modified porous starch as the dual-functional microcapsule for encapsulation and antioxidant property

A dual-functional food-grade microcapsule, which was constructed by caffeic acid and porous starch was obtained. Caffeic acid modified porous starch (CA-PS) was accordingly synthesized successfully by esterification. Carbonyl signal observed by ¹³C solid state NMR (170 ppm) and FT-IR (1745 cm^-1), indicating the formation of ester bond. BET of CA-PS was determined as 44.8 m²/g by N₂ adsorption analysis. The results proved CA-PS has both excellent adsorption and antioxidant activity. Furthermore, it has been applied for encapsulation of linoleic acid (LA) to prevent its degradation effectively, because LA adsorbed in porous adsorbents without antioxidant activity may still suffer serious oxidation. Besides, ¹H NMR Integral of LA did not show a significant decay. This observation demonstrated CA-PS indeed has the better performance on protection of LA than PS. We expect this work will boost research on designing and employing multi-functional starchy materials for further applications.

Porous corn starch obtained from combined cold plasma and enzymatic hydrolysis: Microstructure and physicochemical properties

The combined effect of cold plasma treatment and enzymatic hydrolysis was investigated on the physicochemical and microstructural properties of porous corn starch. Scanning electron microscopy (SEM) images depicted that the combined treatment led to the creation of deeper pores on the surface of starch granules. The combined treatment indicated the highest swelling power (19.49 g/g), solubility (10.08 %), specific surface area (2.97 m²/g) and total pore volume (10.47 cm³/g). According to the X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), the combined treatment, compared with the enzymatic hydrolysis, decreased the starch crystallinity, the order of the double-helix structure, and the starch gelatinization enthalpy. The rapid visco analyzer (RVA) pasting profile revealed that the combined treatment elevated the breakdown and setback viscosities. This study indicated that cold plasma pretreatment, as a green non-thermal technology, facilitated the performance of enzymes, resulting in the production of a porous starch with a higher absorption capacity.

Enhanced Bioaccessibility of Microencapsulated Puerarin Delivered by Pickering Emulsions Stabilized with OSA-Modified Hydrolyzed Pueraria montana Starch: In Vitro Release, Storage Stability, and Physicochemical Properties

Puerarin is a bioactive flavonoid isolated from Kudzu roots that possesses numerous health benefits. However, its poor bioavailability and existing complex delivery systems with safety issues are challenging tasks for its incorporation into functional foods. Preparing modified-starch-stabilized Pickering emulsions containing microencapsulated puerarin with improved bioaccessibility was the key objective of the present research work. Acid-hydrolyzed high-amylose Pueraria montana starch (PMS) was modified with octenyl succinic anhydride (OSA) and evaluated as an emulsifier to prepare emulsions. The FTIR, SEM, and XRD results showed that PMS was successfully modified. Furthermore, the emulsification index (EI), mean droplet size, and ζ-potential values showed that modified starch with a higher degree of substitution (DS) enhanced the storage stability of emulsions. Similarly, the retention degree and encapsulation efficiency results of puerarin proved the assumption after storage of 16 d. The Pickering emulsions also helped in the controlled release of microencapsulated puerarin in vitro. The study outcomes proved that Pickering emulsions stabilized with OSA-modified PMS have promising applicability in functional foods as efficient food-grade delivery systems, enhancing oral supplementation and accessibility of puerarin.

Insights into the gelatinization of potato starch by in situ 1H NMR

The gelatinization of potato starch and the effect of NaCl on starch gelatinization were monitored successfully in situ by 1H NMR spectroscopy. Variable temperature (VT) 1H NMR measurement, from 316 K to 340 K, was conducted on a suspension of potato starch and deuterium water as well as a mixture of potato starch, NaCl and deuterium water. The hydration level of starch was determined with the increase of temperature. In the presence of NaCl, the initial gelatinization temperature of potato starch was decreased from 331 to 328 K. Meanwhile, in situ 1H NMR spectroscopy as a function of time was also carried out to monitor the gelatinization with a time resolution of 90 s per spectrum. Furthermore, the effect of using different processing methods during gelatinization, including varying the temperature or time duration, was investigated in detail. It was confirmed that protons from different groups of starch showed different accessibility for water during hydration of starch granules. In comparison with temperature, gelatinization time as the major factor for reaching complete gelatinization was confirmed. We expect that this research, as a continuing effort to apply NMR spectroscopy for characterizing starch, will pave a new way in the structural elucidation of starch.

Probing the structure-antioxidant activity relationships of four cinnamic acids porous starch esters

For investigation of antioxidant capacity relationship, four cinnamic acids (CNAs), including cinnamic (CA), ferulic (FA), p-coumaric (p-CA) and sinapic (SA) acids, were selected to modify porous starch (PS) with different degrees of substitution by esterification, respectively. The ester linkage of CNAs modified PS was confirmed by ¹H NMR, ¹³C solid-state NMR and FT-IR. The porous structure was maintained after esterification. Three in vitro antioxidant assays were applied to measure antioxidant capacities. The order of antioxidant capacity was SA@PS > FA@PS > p-CA@PS > CA@PS, due to the presence of phenolic hydroxyl groups with hydrogen donating abilities. Besides electron-donating group on ortho or para positions the benzene ring further enhances the hydrogen donating ability and the stability of hydroxyl radical. This study not only investigated the antioxidant mechanism of CNA modified starch derivatives but probed the way for synthesis of biodegradable antioxidant materials for the food industries.