A DFT study of the adsorption energy and electronic interactions of the SO2 molecule on a CoP hydrotreating catalyst

COVID-19 detection via isobutyric acid biomarker: A DFT computational study on beryllium-doped C60 fullerene

The COVID-19 pandemic has underscored the urgent need for rapid, accurate, and non-invasive diagnostic methods. This study explores the potential of beryllium-doped C60 fullerene as a sensor for detecting COVID-19 via isobutyric acid (ISO-But), a biomarker found in the breath of infected individuals. By employing Density Functional Theory (DFT), we analyze the electronic and structural properties of pristine and metal-doped C60 fullerenes (Beryllium (Be) and Calcium (Ca)), focusing on their interactions with isobutyric acid. Our findings reveal that BeC59, combined with isobutyric acid, displays a colorimetric response within the visible spectrum, indicating its suitability for point-of-care diagnostics. With rapid recovery and strong interaction properties, this sensor design promises to advance non-invasive COVID-19 detection, making it accessible and feasible for real-time applications.

Unlocking the sensing and scavenging potential of Sc2CO2 and Sc2CO2/TMD heterostructures for phosgene detection

The detection of phosgene is critically important owing to its extreme toxicity and potential use as a chemical warfare agent to ensure public safety and security. Two-dimensional (2D) scandium carbide MXenes (Sc2CTx; T = O-, x = 2) stand out as promising materials for gas sensing applications owing to their unique electronic and adsorption properties. In this study, first-principles calculations based on the GGA-PBE functional were employed to investigate the structural, electronic, and mechanical characteristics of Sc2CO2 with different surface termination positions. The adsorption behavior of Sc2CO2 was systematically explored for various gas molecules, including N2, O2, CO, NO, CH4, H2S, and, notably, phosgene (COCl2). Specifically, phosgene exhibited a high adsorption energy, highlighting the selectivity of Sc2CO2 towards this toxic gas. Furthermore, the impact of gas adsorption on the electronic structure of Sc2CO2 was investigated. Strategies such as increasing the operating temperatures and forming heterostructures with transition metal di-chalcogenides (MoSe2 and WSe2) proved to be highly effective to mitigate the challenges related to slow recovery time. Thus, this work underscores the potential of Sc2CO2 MXenes as highly sensitive and selective gas sensors, particularly for phosgene sensing.

A Density Functional Theory Study on the Effects of Silver Doping on the Properties and Flotation Behavior of Jamesonite

Silver (Ag) is a precious and valuable metal, and it has many carrier minerals. Through LA-ICP-MS analysis, it was found that jamesonite not only contains lead (Pb) and antimony (Sb) as precious metals but also trace amounts of Ag. In practice, the flotation method is generally used to recover these metals. This paper employs density functional theory calculations to demonstrate that after Ag doping in jamesonite, the Ag atoms exist in the lattice channels of jamesonite, and they form strong covalent bonds with the S atoms, resulting in strong interactions. When Ag is doped in the channels, the adsorption of sodium diethyldithiocarbamate (DDTC) as a collector on the Ag-doped jamesonite surface is the strongest, while that of butyl xanthate is the weakest. The adsorption interactions on the Ag-doped jamesonite surface are also stronger than on pure jamesonite. Coordination chemistry studies reveal that Ag+ undergoes a transition from a d10 to a d9s1 electronic configuration when incorporated into jamesonite, which increases its reactivity by generating unpaired electrons available for π-backbonding with collector molecules. Furthermore, owing to the high polarizability of Ag, the presence of Ag atoms alters the electronic environment of the surrounding Pb atoms, which enhances the π-backbonding interactions between the adsorbate reagent molecules and the Ag active sites. The research results are of great significance for the efficient recovery of Ag-containing jamesonite and provide a reference for the study of the properties of Ag-doped minerals.

First-principles investigations on the conducting photocatalytic behaviour in SrZrxGe1-xO3 (x = 1, 0.96, 0.92 and 0.88)

Strontium Zirconate (SrZrO₃) is a well-known perovskite-type material that has generated significant interest in materials research due to its unique structural and functional features. In addition, it has appeared as a potential photocatalyst in the realm of environmental remediation and energy conversion. The electronic structure and structural geometry of the SrZrO3 crystal were computed employing the five functionals of GGA, including GGA with PBE, GGA with RPBE, GGA with PW91, GGA with WC, and GGA with PBEsol, as well as DFT + U using by computational approaches. Next, to improve the photocatalytic activity with reduced band gap, the doping by 4%, 8%, and 12% of Ge atoms in substituting Zr atoms has the empirical formula: SrZr0.96Ge0.04O3, SrZr0.92Ge0.08O3 and SrZr0.88Ge0.12O3, respectively. Secondly, GGA with PBE method conveyed almost overlapping band gap (3.72 eV) with the experimental value at 3.72 eV for standard, SrZrO3 crystal. As a result, it was used for calculation of the density of state (DOS), the partial density of state (PDOS), and optical properties. At last, the absorption ability regarding their photocatalytic activity against methylene blue (MB) dye was assessed and calculated. First of all, the band gaps by the most accurate method of GGA with PBE are at 3.72, 2.43, 2.18, and 1.20 eV for SrZrO3, SrZr0.96Ge0.04O3, SrZr0.92Ge0.08O3 and SrZr0.88Ge0.12O3, respectively. Secondly, having the sharp peak for all crystals in valence band (VB), they are considered as p-type semiconductor materials, creating holes in the VB thereby enabling more hydroxyl free radical for photocatalysis. Doping showed no effect on absorbance at photon energies greater than 4.0 eV, but it can have an effect at lower photon energies, which is more supportive of band gap or electronic structure. In case of absorption, SrZr0.88Ge0.12O3 illustrates the highest photocatalytic activity against MB dye, and have a larger surface energy.

Investigations into the Nucleation Dynamics of the Stable Na-Metal Anode: Revealing the Role of a Tin-Infused Carbon Nanofiber Interlayer

Fundamental understanding and controlling of sodium nucleation are essential for enhancing the performance, safety, and longevity of sodium metal batteries, which is not yet clearly understood in the case of sodium metal batteries. The present study showcases how a modification in the host material influences nucleation kinetics. Current-time transient studies on copper, carbon nanofiber, and tin-embedded carbon nanofiber interlayers employing the Scharifker-Hills model elucidate the mode of nucleation. This work tries to delve deep and presents a case study on how a tin-based interlayer can not only minimize the barrier for sodium nucleation but also direct the sequential progressive and instantaneous nucleation of sodium metal while reducing the overpotential substantially, resulting in crystalline, uniform Na-metal deposition. Further, to account for the complex dynamics of solid electrolyte interphase (SEI) formation distinctly associated with alkali metal deposition, the SEI-fracture model has been included, and the quantification of electrochemical nucleation parameters is obtained. The results provide important insights into the sodium nucleation mechanism, paving the way to counter dendrite formation and SEI dissolution issues of the Na-metal anode.

Evaluating the CO2 capture potential of MgO sheets: a DFT study on the effects of vacancy and Ni doping for assessing environmental sustainability

Investigations on two-dimensional materials for efficient carbon dioxide (CO2) capture and storage have recently attracted much attention, especially in the global industrial sector. In this work, the CO2 uptake by three configurations of two-dimensional magnesium oxide was investigated using density functional theory. CO2 capture analysis was performed considering the geometrical, thermophysical, vibrational, electronic and optical properties. Results indicated that CO2 adsorption by magnesium oxide (MgO) sheets is a spontaneous process accompanied by a decrease in Gibbs free energy. Moreover, the CO2 molecular entropy and enthalpy of the CO2 adsorbed sheet were decreased, indicating that the entire process was enthalpy-driven. Among the pristine, vacant and nickel-doped (Ni-doped) MgO sheets, the Ni-doped system was found to have the highest values of Gibbs free energy, enthalpy and entropy in the order of -51.366 kJ mol-1-K, -65.105 kJ mol-1 and 127.606 J mol-1, respectively. It was also found to adsorb CO2 in the ultraviolet and visible (UV-Vis) regions within the range of 100-850 nm. Electronic interactions demonstrated that metallicity was significantly induced on the MgO sheet Ni impurity states, which enhanced the adsorption ability. Notably, hybrid orbitals between p y and p z revealed strong physisorption, as confirmed by the partial density of states (PDOS). The findings of this research promote CO2 capture sustainability by encouraging future experimentalists to use two-dimensional MgO as a better surface for CO2 capture.

Deciphering heterojunction layered double hydroxide-polyaniline-carbon nanotubes for phosphorus capture in capacitive deionization

The capacitive deionization (CDI) has emerged as a robust technology due to its effective performance in removing and recovering phosphate in wastewater. However, there are still challenges in achieving fast charge transfer and high capacity phosphorus storage simultaneously. In this study, a layered double hydroxide-polyaniline-carbon nanotubes composite material (ZnFe-PANI/CNT) with heterojunction and pseudocapacitive characteristics was fabricated via a simple and effective precipitation strategy. The existence of heterojunction and pseudocapacitance of ZnFe-PANI/CNT was confirmed through material performance testing Moreover, with its fast charge transfer and high ion storage performance, it was achieved high phosphate adsorption efficiency (94 %) and sustainable electrode regeneration in low concentration phosphate wastewater. Ultraviolet photoelectron spectroscopy (UPS) and density functional theory revealed the ability to accelerate charge transfer, which was contributed by the heterojunction ZnFe-PANI/CNT. In addition, it was found that the synergies of electrostatic attraction, ligand exchange and surface complexation contributed to the high phosphate capture ability in the acidic environments. The binuclear bidentate or mononuclear bidentate structures dominated the surface configuration of phosphate adsorption at pH 4-9.

Exploring the Electronic Interactions of Adenine, Cytosine, and Guanine with Graphene: A DFT Study

This study has provided new insights into the interaction between graphene and DNA nucleobases (adenine, cytosine, and guanine). It compares how each nucleobase interacts with graphene, examining their selectivity and binding energy. The research also explores how these interactions impact the electronic properties of graphene, showing potential applications in graphene-based biosensors and DNA sequencing technologies. Additionally, the findings suggest potential uses in DNA sensing and the functionalization of graphene for various biomedical applications. This study employs density functional theory (DFT) methods, utilizing the B3LYP functional with the 6-311G basis set, to explore the electronic interactions between DNA nucleobases (adenine, cytosine, and guanine) with pure graphene (Gr). We investigate various properties, including adsorption energy, HOMO-LUMO energy levels, charge transfer mechanisms, dipole moments, energy gaps, and density of states (DOS). Our findings indicate that cytosine interacts most favorably with graphene through its oxygen site (Gr-Cyt-O), exhibiting the strongest adsorption. Additionally, adenine's interaction significantly enhances its electronegativity and chemical potential, particularly at the nitrogen position, while decreasing its electrophilicity. Guanine, characterized by the smallest energy gap, demonstrates the highest conductivity among the nucleobases. These results suggest that graphene possesses advantageous properties as an adsorbent for guanine, highlighting its potential applications in biosensor technology.

AlN Nanotube Decorated with Small Tin Oxide Clusters as a Novel CH4 Sensing Material

The success of carbon nanotubes has triggered a great deal of research interest in other one-dimensional nanomaterials with the aim of designing innovative nanostructures with attractive and distinctive attributes for applications in sensing gas molecules and toxic substances. In the present study, first-principles density functional theory calculations were exploited to assess the capability of the small tin oxide cluster (SnxOy)-decorated (6,0)aluminum nitride (AlN) nanotube for detecting methane(CH4) in terms of energetic, structural, and electronic properties. We found that SnxOy clusters were chemisorbed on the surface of the AlN nanotube due to the considerable adsorption energy and the notable charge transfer from the former to the latter. Further calculations demonstrate that the energy band gap and work function of the AlN nanotube were reduced in the presence of additives. Benefiting from the higher affinity of SnxOy toward the CH4 molecule, the Sn3O3-decorated AlN nanotube exhibited the greatest CH4 adsorption energy. The electrical conductivity increased as the energy band gap and effective mass decreased dramatically. Additionally, the type of Sn3O3-decorated AlN nanotube changed from a p-type semiconductor to an n-type one after adsorbing the CH4 molecule. Therefore, the Sn3O3-decorated AlN nanotube endows great promise as a thermopower-based, resistance-based, and Seebeck-effect-based CH4 sensing material.

First-principles study of a SiC nanosheet as an effective material for nitrosourea and carmustine anti-cancer drug delivery

The development of novel nanosheet-based drug delivery systems requires a systematic understanding of the interactions between the drug and the nanosheet carrier under various physiological environments. In this work, we investigated electronic and quantum molecular descriptors of a SiC monolayer adsorbed with the anticancer drugs nitrosourea (NU) and carmustine (BCNU) using density functional theory (DFT). Our calculations revealed negative adsorption energies for both drugs, indicating a spontaneous and energetically favorable adsorption process. Density of states and orbital population analysis studies revealed that both drugs are capable of significantly (>30%) narrowing the gap between HOMO and LUMO, depending on the configuration of the adsorption complex. Furthermore, the electronic and quantum molecular descriptors were investigated in gas and water mediums to explore the effect of the solvent on the adsorption process. Our calculations predict a higher narrowing of the HOMO-LUMO gap in the water phase compared to the gas phase. Besides, a modest reduction in global hardness and a marked increase in the global electrophilicity index were observed after the adsorption of the drug molecules by the SiC nanosheet, indicating its high reactivity towards both NU and BCNU. Changing the medium to water showed a maximum 2× increase in the global electrophilicity index of the nanosheet for NU and a maximum 7× increase for BCNU. Additionally, the thermodynamic study of the adsorption process indicates that the formation energies at high temperatures are smaller than those at low temperatures, unfolding the potential of SiC nanosheet for application in the phototherapy of these drugs.

First-principles study of the oxidation susceptibility of WS2, WSe2, and WTe2 monolayers

The environmental stability of two-dimensional (2D) transition metal dichalcogenide monolayers is of great importance for their applications in electronic, photonic, and energy storage devices. In this study, we focus on understanding the susceptibility of WS2, WSe2, and WTe2 monolayers to oxygen exposure in the form of atomic oxygen and O2 and O3 molecules, respectively. Calculations based on the van der Waals-corrected density functional theory predicted that O2 and O3 molecules are weakly adsorbed on these monolayers, although atomic oxygen prefers chemisorption accompanied by a significant charge transfer from the surface to oxygen. In the physisorbed molecular configurations consisting of O2 and O3, the partially oxidized monolayers retain their geometrical and electronic structures. The calculated transition path as the oxygen approaches the surface shows a high-energy barrier for all cases, thus explaining the photo-induced formation of the oxidized configurations in the experiments. Furthermore, oxidizing the WS2 monolayer is predicted to modify its electronic structure, reducing the band gap with increasing oxygen coverage on the surface. Overall, the calculated results predict the resilience of WS2, WSe2, and WTe2 monolayers against oxygen exposure, thus ensuring stability for devices fabricated with these monolayers.

Structural and electronic properties of Li-adsorbed single and bilayer porphyrin sheets as an electrode material for energy storage devices - a DFT analysis

In this study, we adopt density functional theory (DFT) to investigate the structural and electronic properties of monolayer and bilayer 2-D porphyrin sheets (PS) of covalent organic frameworks (COFs) upon interaction with Li atoms as an electrode material for Li-ion batteries. Based on their mechanical properties, our systems exhibit remarkable stability. The adsorption of Li at various sites in the monolayer, including over and between the bilayers of PS, is investigated. Our results indicate that Li at site S3 has the highest adsorption energy, and Li is energetically preferred to intercalate within the bilayer rather than monolayers due to its high adsorption energies. Notably, the charge transfer remains consistent for both systems. The density of state distribution, charge density difference plots, spin density and the band structure results show that the PS has high electrical conductivity. Additionally, the reaction potential was carried out, and the negative reaction potential results demonstrate that the system undergoes a reduction reaction. The resultant theoretical capacity and the open circuit voltage highlight that the PS materials of COFs are an important step for use in the next generation high-performance lithium-ion batteries.

High CO and sulfur tolerant proton exchange membrane fuel cell anodes enabled by "work along both lines" mechanism of 2,6-dihydroxymethyl pyridine molecule blocking layer

Proton exchange membrane fuel cells (PEMFCs) are hindered by their poor tolerance to CO and H2S poisoning. Herein, we report an effective method, via engineering 2,6-dihydroxymethyl pyridine (DhmPy) molecule blocking layers on Pt surface, aiming to save the poisoning issue for PEMFC anode reaction. The PEMFCs assembled by this catalyst produce a power density of 1.18 W cm-2 @ 2.0 A cm-2 and 1.32 W cm-2 @ 2.0 A cm-2, far exceeding commercial Pt/C after H2/10 ppm CO poisoning and H2/5 ppm H2S poisoning tests, respectively. Density functional theory (DFT) indicates that a coronal molecule layer with a steric confinement height (1.82 Å), constructed by DhmPy, emerges more intensive adsorption energy compared to 2,6-pyridinedicarboxamide (DcaPy) and 2,6-diacetylpyridine (DAcPy), thereby more effectively inhibits the adsorption of large-sized CO and H2S on Pt surface without affecting H2 traverse. This "work along both lines" mechanism with the resistance of both CO and H2S provides a new and promising design thought for high CO and sulfur tolerant PEMFC anodes.

Screening of Metal Oxides and Hydroxides for Arsenic Removal from Water Using Molecular Dynamics Simulations

Arsenic in groundwater is a harmful and hazardous substance that must be removed to protect human health and safety. Adsorption, particularly using metal oxides, is a cost-effective way to treat contaminated water. These metal oxides must be selected systematically to identify the best material and optimal operating conditions for the removal of arsenic from water. Experimental research has been the primary emphasis of prior work, which is time-consuming and costly. The previous simulation studies have been limited to specific adsorbents such as iron oxides. It is necessary to study other metal oxides to determine which ones are the most effective at removing arsenic from water. In this work, a molecular simulation computational framework using molecular dynamics and Monte Carlo simulations was developed to investigate the adsorption of arsenic using various potential metal oxides. The molecular structures have been optimized and proceeded with sorption calculations to observe the adsorption capabilities of metal oxides. In this study, 15 selected metal oxides were screened at a pressure of 100 kPa and a temperature of 298 K for As(V) in the form of HAsO4 at pH 7. Based on adsorption capacity calculations for selected metal oxides/hydroxides, aluminum hydroxide (Al(OH)3), ferric hydroxide (FeOOH), lanthanum hydroxide La(OH)3, and stannic oxide (SnO2) were the most effective adsorbents with adsorption capacities of 197, 73.6, 151, and 42.7 mg/g, respectively, suggesting that metal hydroxides are more effective in treating arsenic-contaminated water than metal oxides. The computational results were comparable with previously published literature with a percentage error of 1%. Additionally, SnO2, which is rather unconventional to be used in this application, demonstrates potential for arsenic removal and could be further explored. The effects of pH from 1 to 13, temperature from 281.15 to 331.15 K, and pressure from 100 to 350 kPa were studied. Results revealed that adsorption capacity decreased for the high-temperature applications while experiencing an increase in pressure-promoted adsorption. Furthermore, response surface methodology (RSM) has been employed to develop a regression model to describe the effect of operating variables on the adsorption capacity of screened adsorbents for arsenic removal. The RSM models utilizing CCD (central composite design) were developed for Al(OH)3, La(OH)3, and FeOOH, having R2 values 0.92, 0.67, and 0.95, respectively, suggesting that the models developed were correct.

Adsorption of pyrolysis oil model compound (phenol) with plasma-modified hydro-chars and mechanism exploration

Phenol is one of the important ingredients of pyrolysis oil, contributing to the high biotoxicity of pyrolysis oil. To promote the degradation and conversion of phenol during anaerobic digestion, cheap hydro-chars with high phenol adsorption capacity were produced. The phenol adsorption capabilities of the plain hydro-char, plasma modified hydro-char at 25 °C (HC-NH3-P-25) and 500 °C (HC-NH3-P-500) were evaluated, and their adsorption kinetics and thermodynamics were explored. Experimental results indicate that the phenol adsorption capability of HC-NH3-P-500 was the highest. The phenol adsorption kinetics of all samples followed the pseudo-second-order equation and interparticle diffusion model, indicating that the adsorption rate of phenol was controlled by interparticle diffusion and chemistry adsorption simultaneously. By DFT calculations, π-π stacking and hydrogen bond are the main interactions for phenol adsorption. It was observed that an enriched graphite N content decreased the average vertical distance between hydro-chars and phenol in π-π stacking complex, from 3.5120 to 3.4532 Å, causing an increase in the negative adsorption energy between phenol and hydro-char from 13.9330 to 23.4181 kJ/mol. For hydrogen bond complex, the average vertical distance decreased from 3.4885 to 3.3386 Å due to the increase in graphite N content; causing the corresponding negative adsorption energy increased from 19.0233 to 19.9517 kJ/mol. Additionally, the presence of graphite N in the hydro-char created a positive diffusion region and enhanced the electron density between hydro-char and phenol. Analyses suggest that enriched graphite N contributed to the adsorption complex stability, resulting in an improved phenol adsorption capacity.

Impact of Polythiophene ((C4H4S)n; n = 3, 5, 7, 9) Units on the Adsorption, Reactivity, and Photodegradation Mechanism of Tetracycline by Ti-Doped Graphene/Boron Nitride (Ti@GP_BN) Nanocomposite Materials: Insights from Computational Study

This study addresses the formidable persistence of tetracycline (TC) in the environment and its adverse impact on soil, water, and microbial ecosystems. To combat this issue, an innovative approach by varying polythiophene ((C4H4S)n; n = 3, 5, 7, 9) units and the subsequent interaction with Ti-doped graphene/boron nitride (Ti@GP_BN) nanocomposites was applied as catalysts for investigating the molecular structure, adsorption, excitation analysis, and photodegradation mechanism of tetracycline within the framework of density functional theory (DFT) at the B3LYP-gd3bj/def2svp method. This study reveals a compelling correlation between the adsorption potential of the nanocomposites and their corresponding excitation behaviors, particularly notable in the fifth and seventh units of the polythiophene configuration. These units exhibit distinct excitation patterns, characterized by energy levels of 1.3406 and 924.81 nm wavelengths for the fifth unit and 1.3391 and 925.88 nm wavelengths for the seventh unit. Through exploring deeper, the examination of the exciton binding energy emerges as a pivotal factor, bolstering the outcomes derived from both UV-vis transition analysis and adsorption exploration. Notably, the calculated exciton binding energies of 0.120 and 0.103 eV for polythiophene units containing 5 and 7 segments, respectively, provide compelling confirmation of our findings. This convergence of data reinforces the integrity of our earlier analyses, enhancing our understanding of the intricate electronic and energetic interplay within these intricate systems. This study sheds light on the promising potential of the polythiophene/Ti-doped graphene/boron nitride nanocomposite as an efficient candidate for TC photodegradation, contributing to the advancement of sustainable environmental remediation strategies. This study was conducted theoretically; hence, experimental studies are needed to authenticate the use of the studied nanocomposites for degrading TC.

Design, synthesis, and density functional theory studies of a new selective chemosensor for Pb2

Herein, we have focused on a new colorimetric ligand synthesized from the reaction of 2-hydroxy-5-methylbenzene-1,3-dialdehyde with 2-amino-thiophenol, and investigated its activity as a sensor. In this regard, the sensory activity of the ligand towards different ions (Mn2+, Cu2+, Co2+, Fe2+, Fe3+, Zn2+, Ni2+, Cd2+, Ag+, Na+, Cs+, Mg2+, Al3+, Ba2+, K+, and Pb2+) was studied. The specificity of ion bindings is discussed through UV-Vis analysis. The ligand that was synthesized showed remarkable sensitivity, with a detection limit of 0.001 ppb. Additionally, the presence of Pb2+ ions can be visually detected through a color change from colorless to yellow. In the last part of this work, we seek to predict the available experimental measurements. Density functional theory (DFT) and quantum theory of atoms in molecules (QTAIM) are employed to examine the bonding between the ligand and the Pb2+ ion. The effect of water solvent was thoroughly examined for all the steps via the conductor-like Polarizable Continuum Model (CPCM). The theoretical findings revealed that electronic properties, including energy gap, adsorption energy, charge/energy transfer, and optical characteristics, undergo significant changes when Pb2+ cations are present. Hence, it can be inferred that the newly synthesized chemosensor (NC) is highly efficient in detecting Pb2+.

Understanding Trends in Electrochemical Methanol Oxidation Reaction Activity on a Single Transition-Metal Atom Embedded in N-Coordinated Graphene Catalysts

The lack of efficient catalysts and research on the mechanism for the methanol oxidation reaction (MOR) impedes the development of direct methanol fuel cells. In this work, based on density functional theory calculations, we systematically investigated the activity trends of electrochemical MOR on a single transition-metal atom embedded in N-coordinated graphene (M@N₄C). By calculating the free energy diagrams of MOR on M@N₄C, Co@N₄C was screened out to be the most effective MOR catalyst with a low limiting potential of 0.41 V due to the unique charge transfers and electronic structures. Importantly, one- and two-dimensional volcano relationships in MOR on M@N₄C catalysts are established based on the d-band center and the Gibbs free energy of ΔG*CH3OH and ΔG_*CO, respectively. In one word, this work provides theoretical guides toward the improved activity of MOR on M@N₄C and hints for the design of active and efficient MOR electrocatalysts.

The electronic structures of non-metal (N, S) doped cobalt phosphide catalysts and the catalytic mechanism for the hydrogen evolution reaction of ammonia borane: a theoretical study

The electronic structures of non-metal (N, S) doped CoP catalysts and the mechanism of the hydrogen evolution reaction of ammonia borane catalyzed by three catalysts were studied using density functional theory.

Effect of Ni atomic fraction on active species of graphene growth on Cu–Ni alloy catalysts: a density functional theory study

The CH and C monomers on the surface are the active species on Cu–Ni catalysts with low Ni atomic fractions. In contrast, the C monomer species on the subsurface acts as an active species on a Cu–Ni catalyst with a high Ni atomic fraction.

Theoretical Study of Hydrogen Production from Ammonia Borane Catalyzed by Metal and Non-Metal Diatom-Doped Cobalt Phosphide

The decomposition of ammonia borane (NH3BH3) to produce hydrogen has developed a promising technology to alleviate the energy crisis. In this paper, metal and non-metal diatom-doped CoP as catalyst was applied to study hydrogen evolution from NH3BH3 by density functional theory (DFT) calculations. Herein, five catalysts were investigated in detail: pristine CoP, Ni- and N-doped CoP (CoPNi-N), Ga- and N-doped CoP (CoPGa-N), Ni- and S-doped CoP (CoPNi-S), and Zn- and S-doped CoP (CoPZn-S). Firstly, the stable adsorption structure and adsorption energy of NH3BH3 on each catalytic slab were obtained. Additionally, the charge density differences (CDD) between NH3BH3 and the five different catalysts were calculated, which revealed the interaction between the NH3BH3 and the catalytic slab. Then, four different reaction pathways were designed for the five catalysts to discuss the catalytic mechanism of hydrogen evolution. By calculating the activation energies of the control steps of the four reaction pathways, the optimal reaction pathways of each catalyst were found. For the five catalysts, the optimal reaction pathways and activation energies are different from each other. Compared with undoped CoP, it can be seen that CoPGa-N, CoPNi-S, and CoPZn-S can better contribute hydrogen evolution from NH3BH3. Finally, the band structures and density of states of the five catalysts were obtained, which manifests that CoPGa-N, CoPNi-S, and CoPZn-S have high-achieving catalytic activity and further verifies our conclusions. These results can provide theoretical references for the future study of highly active CoP catalytic materials.

Integrating Covalent Organic Framework with Transition Metal Phosphide for Noble-Metal-Free Visible-Light-Driven Photocatalytic H2 Evolution

2D covalent organic frameworks (COFs) are considered as one kind of the most promising crystalline porous materials for solar-driven hydrogen production. However, adding noble metal co-catalysts into the COFs-based photocatalytic system is always indispensable. Herein, through a simple solvothermal synthesis method, TpPa-1-COF, a typical 2D COF, which displays a wide light absorption region, is rationally combined with transition metal phosphides (TMPs) to fabricate three TMPs/TpPa-1-COF hybrid materials, named Ni₁₂ P₅ (Ni₂ P or CoP)/TpPa-1-COF. The incorporated TMPs can be served as electron collectors for accelerating the transfer of charges on TpPa-1-COF, thus the composites are demonstrated to be efficient photocatalysts for promoting water splitting. Benefitting from the richer surface reactive sites and lower H* formation energy barrier, the Ni₁₂ P₅ can most effectively improve the photocatalytic performance of the TpPa-1-COF, and the H₂ evolution rate can reach up to 31.6 µmol h^-1 , approximately 19 times greater than pristine TpPa-1-COF (1.65 µmol h^-1 ), and is comparable to the Pt/TpPa-1-COF (38.8 µmol h^-1 ). This work is the first example of combining COFs with TMPs to construct efficient photocatalysts, which may offer new insight for constructing noble-metal-free COF-based photocatalysts.

Zr-Doped h-BN Monolayer: A High-Sensitivity Atmospheric Pollutant-Monitoring Sensor

In the post-epidemic era, industrial production has gradually recovered, and the attendant air pollution problem has attracted much attention. In this study, the Zr-doped h-BN monolayer (Zr-BN) is proposed as a new gas sensor for air pollution. Based on density functional theory (DFT), we calculated and compared the adsorption energies (Eads), geometric parameters, the shortest distance between gas and substrate (dsub/gas), density of states (DOS), electron localization function (ELF), charge density difference (CDD), band structure, band gap energy change rate (ΔEg), and sensitivity (S) of Zr-BN adsorption systems (SO2F2, SOF2, SO2, NO, and CO2 adsorption systems). The results show that Zr-BN had strong adsorption and high sensitivity to the above-mentioned polluted gases, and the sensitivity was in the order of SOF2 > SO2F2 > CO2 > SO2 > NO. Therefore, this study provides a theoretical basis for the preparation of Zr-BN gas sensors and provides new ideas and methods for the development of other gas sensors.

NiO‐MnOx/Polyaniline/Graphite Electrodes for Urea Electrocatalysis: Synergetic Effect between Polymorphs of MnOx and NiO

In this work, we are enhancing the catalytic activity of the urea electrooxidation (UEO) process by using the composite of polyaniline (Pani), nickel oxide (NiO), and polymorphs of manganese oxide (MnOx) based on a graphite electrode. The hydro‐gel method was used to prepare catalyst suspension with different ratios from NiO and MnOx. The chemical structures and surface morphology were characterized by employing the IR, XRD, and SEM/EDEX techniques. The catalytic activity of four modified electrocatalysts G/Pani/NiMn1, G/Pani/NiMn2, G/Pani/NiMn3, G/Pani/NiMn4 was investigated using cyclic voltammetry, chronoamperometry, and electrochemical impedance. The kinetic parameters such as diffusion coefficient, Tafel slope, charge transfer coefficient, and surface coverage were calculated to choose the best electrocatalysts toward UEO in alkaline solution. The anodic current of new electrodes achieved about 16 mA.cm−2at potential of 550 mV (vs. Ag/AgCl). Density functional theory studies (DFT) have been carried out to assess the adsorption energy between polyaniline (Pani) and the metal oxides.

Metal-Free Phosphated Mesoporous SiO2 as Catalyst for the Low-Temperature Conversion of SO2 to H2S in Hydrogen

Highly active metal-free mesoporous phosphated silica was synthesized by a two-step process and used as a SO2 hydrogenation catalyst. With the assistance of a microwave, MCM-41 was obtained within a 10 min heating process at 180 °C, then a low ratio of P precursor was incorporated into the mesoporous silica matrix by a phosphorization step, which was accomplished in oleylamine with trioctylphosphine at 350 °C for 2 h. For benchmarking, the SiO2 sample without P precursor insertion and the sample with P precursor insertion into the calcined SiO2 were also prepared. From the microstructural analysis, it was found that the presence of CTAB surfactant was important for the incorporation of active P species, thus forming a highly dispersed, ultrafine (uf) phosphate silica, (Si-P) catalyst. The above approach led to the promising catalytic performance of uf-P@meso-SiO2 in the selective hydrogenation of SO2 to H2S; the latter reaction is very important in sulfur-containing gas purification. In particular, uf-P@meso-SiO2 exhibited activity at the temperature range between 150 and 280 °C, especially SO2 conversion of 94% and H2S selectivity of 52% at 220 °C. The importance of the CTAB surfactant can be found in stabilizing the high dispersion of ultrafine P-related species (phosphates). Intrinsic characteristics of the materials were studied using XRD, FTIR, EDX, N2 adsorption/desorption, TEM, and XPS to reveal the structure of the above catalysts.