Electroactive and degradable supramolecular microgels

Transient colloidal crystals fueled by electrochemical reaction products

Conventional electric field directed colloidal assembly enables fabricating ordered structures but lacks temporal control over assembly state. Chemical reaction networks have been discovered that transiently assemble colloids; however, they have slow dynamics (hrs - days) and poor temporal tunability, utilize complex reagents, and produce kinetically trapped states. Here we demonstrate transient colloidal crystals that autonomously form, breakup, and reconstitute in response to an electrochemical reaction network driven by a time invariant electrical stimulus. Aqueous mixtures of micron sized colloids and para-benzoquinone (BQ) were subjected to superimposed oscillatory and steady electric potentials, i.e., multimode potentials, that induce electrokinetic flows around colloids and proton-coupled BQ redox reactions. Transient assembly states coincided with electrochemically generated pH spikes near the cathode. We demonstrate wide tunability of transient assembly state lifetimes over two orders of magnitude by modifying the electric potential and electrode separation. An electrochemical transport model showed that interaction of advancing acidic and alkaline pH fronts from anodic BQ oxidation and cathodic BQ reduction caused pH transients. We present theoretical and experimental evidence that indicates transient colloidal crystals were mediated by competition between opposing colloidal scale electrohydrodynamic and electroosmotic flows, the latter of which is pH dependent.

Conductive Hydrogel Systems Enabling Rapid and Controllable Release of Guests at Low-Voltage Region

Smart delivery materials that respond to electric fields attract interest across various fields, whereas systems enabling rapid, controllable, and safe delivery capabilities remain essential. Based on the hypothesis of utilizing electric field to manipulate inter-component noncovalent bonds in delivery materials, a hydrogel system is hereby reported that is capable of achieving rapid guest release at low-voltage region. This system harnesses the synergistic regulation of electric field-induced host-guest electrostatic repulsion, alongside the dynamic modulation of H-bond interactions within the conductive hydrogel. Consequently, a voltage of 1.5 V influences the multi-component non-covalent crosslinking, inducing reversible pore size enlargement, and achieving an accelerated yet controlled release of 39-48% within 120 min at 1.5 V, with a low-threshold release voltage of 0.5 V. This conductive hydrogel system enables the rapid and controlled release of various guest molecules, including drugs, fluorescent probes, and luminophores, underscoring the universality of the strategy. Furthermore, an electrical control device constructed from such hydrogel blocks is demonstrated, which is capable of performing "time-specific" information encoding and access. The mechanism relies on physical processes, avoiding traditional redox reactions, thereby inspiring the development of safe and efficient electrically responsive materials and devices with diverse functionalities, leveraging the synergistic effect of multi-component non-covalent interactions.

Optimizing the charge transport in redox-active gels: a computational study

Redox-active polymer gels are promising materials for various applications, such as energy conversion and storage systems, organic electronics, soft-robotics, sensors and others. This is in part due to the remarkable structural tunability of these materials. The gel may adopt different conformations depending on the crosslinking density, solvent temperature and other conditions. These parameters affect its behavior, including the dynamics of the charge transport between the redox groups grafted to the polymer subchains, which is of utmost importance for electrochemical applications. Here, we employed coarse-grained molecular dynamics simulation to investigate the impact of crosslinking, redox group content and solvent quality on both subchain mobility and charge transport speed. In particular, unexpected behavior of the system under the theta-solvent condition was found and analyzed. The obtained results provide useful guidelines to facilitate the best conditions for enhanced "redox induced" conductivity in polymer gels, which would help the development of redox-flow batteries and other electrochemical devices.

Redox-Active Water-Soluble Low-Weight and Polymer-Based Anolytes Containing Tetrazine Groups: Synthesis and Electrochemical Characterization

Polymer-based aqueous redox flow batteries (RFBs) are attracting increasing attention as a promising next-generation energy storage technology due to their potential for low cost and environmental friendliness. The search for new redox-active organic compounds for incorporation into polymer materials is ongoing, with anolyte-type compounds in high demand. In response to this need, we have synthesized and tested a range of new water-soluble redox-active s-tetrazine derivatives, including both low molecular weight compounds and polymers with different architectures. S-tetrazines are some of the smallest organic molecules that can undergo a reversible two-electron reduction in protic media, making them a promising candidate for anolyte applications. We have successfully modified linear polyacrylic acid and poly(N-isopropylacrylamide-co-acrylic acid) microgels with pendent 1,2,4,5-tetrazine groups. Electrochemical testing has shown that the new tetrazine-containing monomers and, importantly, the water-soluble redox polymers, both linear and microgel, demonstrate the chemical reversibility of the reduction process in an aqueous solution containing acetate buffer. This expands the range of water-soluble anodic materials suitable for water-based organic RFBs. The reduction potential value can be adjusted by changing the substituents in the tetrazine core. It is also worth noting that the choice of electrode material plays an important role in the kinetics of the tetrazine reaction: the use of carbon electrodes is particularly beneficial.

Using a Supramolecular Monomer Formulation Approach to Engineer Modular, Dynamic Microgels, and Composite Macrogels

Microgels show advantages over bulk hydrogels due to convenient control over microgel size and composition, and the ability to use microgels to modularly construct larger hierarchical scaffold hydrogel materials. Here, supramolecular chemistry is used to formulate supramolecular polymer, dynamic microgels solely held together by non-covalent interactions. Four-fold hydrogen bonding ureido-pyrimidinone (UPy) monomers with different functionalities are applied to precisely tune microgel properties in a modular way, via variations in monomer concentration, bifunctional crosslinker ratio, and the incorporation of supramolecular dyes and peptides. Functionalization with a bioactive supramolecular cell-adhesive peptide induced selectivity of cells toward the bioactive microgels over non-active, non-functionalized versions. Importantly, the supramolecular microgels can also be applied as microscale building blocks into supramolecular bulk macrogels with tunable dynamic behavior: a robust and weak macrogel, where the micro- and macrogels are composed of similar molecular building blocks. In a robust macrogel, microgels act as modular micro-building blocks, introducing multi-compartmentalization, while in a weak macrogel, microgels reinforce and enhance mechanical properties. This work demonstrates the potential to modularly engineer higher-length-scale structures using small molecule supramolecular monomers, wherein microgels serve as versatile and modular micro-building units.

pH-Responsive Deacetylated Sphingan WL Gum-Based Microgels for the Oral Delivery of Ciprofloxacin Hydrochloride

Sphingan WL gum (WL) is an extracellular polysaccharide with a carboxyl group produced by Sphingomonas sp. WG. Recently, we have successfully obtained deacetylated WL (DWL) with good water solubility by alkaline treatment. In this study, a DWL-based microgel (named DWLM) with semi-interpenetrating network structure was constructed for the first time and used to deliver the oral drug ciprofloxacin hydrochloride (CIP). DLS results suggested that DWLM had a dual response to pH and temperature. The in vitro cumulative drug release curves showed that the amount of CIP released from the microgel was higher at pH 6.8 than that at pH 3.0. Biocompatibility assessments using HEK293T showed that cell viability was 75.9 ± 1.7% at the DWLM-CIP concentration of 4 mg/mL. While, the cell viability of CIP at the same concentration was only 54.9 ± 1.0%, indicating that DWLM-CIP has good biocompatibility. Antimicrobial performance tests revealed that DWLM-CIP at a concentration of 1 mg/mL could effectively inhibit the growth of Escherichia coli for up to 4 days. When the concentration of DWLM-CIP reached 4 mg/mL, the growth of Staphylococcus aureus was effectively suppressed for up to 3 days, demonstrating the long-lasting antimicrobial efficacy of DWLM-CIP. All of these results indicate that DWL-based microgels have great potential as oral drug delivery carriers.

Charge Transfer Kinetics of Redox-Active Microgels

Polymer microgel particles decorated with redox-active functional groups are a new and promising object for electrochemical applications. However, the process of charge exchange between an electrode and a microgel particle carrying numerous redox-active centers differs fundamentally from charge exchange involving only molecular species. A single act of contact between the microgel and the electrode surface may not be enough to fully discharge the microgel, and partial charge states are to be expected. Understanding the specifics of this process is crucial for the correct analysis of the data obtained from electrochemical experiments with redox-active microgel solutions. In this study, we employed coarse-grained molecular dynamics to investigate in detail the act of charge transfer from a microgel particle to a flat electrode. The simulations take into account both the mobility of functional groups carrying the charge, which depend on the microgel architecture and the charge exchange between the groups, which can accelerate the propagation of charge within the microgel volume. A set of different microgel systems were simulated in order to reveal the impact of their characteristics: fraction of redox-active groups, microgel molecular mass, cross-linker content, cross-linking topology, and solvent quality. We have found trends in microgel composition leading to the most efficient charge transfer kinetics. The obtained results would be useful for understanding experimental results and for optimizing the design of redox-active microgel particles aimed at faster discharge rates.

Enhanced anticancer activity of piperine: Structural optimization and chitosan-based microgels with boosted drug delivery

As a plant-derived drug, piperine possesses therapeutic efficacy for many diseases, but its inherent low solubility and bioavailability have greatly limited its clinical use. Herein, we extracted piperine from black pepper, optimized the structure of piperine to prepare various derivatives, and then explored the anticancer activity of these derivatives. Piperine and its derivatives have high anticancer selectivity against 4T1 cells, exhibiting obvious anticancer properties even at a low concentration of 100 μg/mL. Furthermore, the physicochemical properties of piperine and its derivatives were investigated using density functional theory, demonstrating their considerable biological activity. Moreover, the chitosan-based microgels were prepared to encapsulate the hydrophobic piperine derivative with a high loading efficiency of 81.7 % to overcome the low water solubility of the piperine derivative. It is worth noting that excessive glutathione in tumor cells triggers the degradation of microgels and realizes controllable drug release of up to 72.3 %. Due to its excellent properties, chitosan-based microgels loaded with the piperine derivative can obtain good anticancer behavior of approximately 13.14 % cell viability against 4T1 cells. Therefore, the chitosan-based microgels overcome the low water solubility of the piperine derivative through encapsulation and thus further augment their delivery efficiency and cell internalization capability to realize excellent anticancer activity. This work demonstrates the enhanced anticancer efficacy of the hydrophobic plant-derived drug by means of structural optimization of piperine and chitosan-based microgels with boosted drug delivery.

Water-borne synthesis of multi-responsive and biodegradable chitosan-crosslinked microgels: Towards self-assembled films with adaptable properties

The present study aims in the synthesis of new biodegradable stimuli-responsive microgels with controllable microstructure and with the ability to form cohesive films. Such self-assembled films by water evaporation at ambient conditions without any chemicals but just physical entanglements between soft colloid shell, present adaptable mechanical, adhesive and mechano-electrical properties. For that, oligo(ethylene glycol)-based stimuli-responsive microgels have been synthesized using biodegradable chitosan-methacrylates (Chi-MAs) with different degree of substitution (DS) as unique cross-linking agents by precipitation polymerization in water, for the first time. In all the cases, the microgels present thermo-responsiveness with hysteresis between heating and cooling cycles. However, this behavior is tuned and controlled using different types and amounts of Chi-MAs. In addition, the type of Chi-MA used can control microgels' microstructure as well as their enzymatic biodegradation. In addition, spontaneous cohesive films formation from colloidal aqueous dispersion with sol-gel transition is demonstrated. The films present tunable mechanical and adhesive properties through microgels' microstructure and enhanced mechano-electrical properties triggered by simple finger pressure (10-15 N). As self-supported films are able to encapsulate different types of active molecules, this study paves the way for suitable self-assembled microgel films for skincare applications as transdermal delivery systems.

Crystalline Antibody-Laden Alginate Particles: A Platform for Enabling High Concentration Subcutaneous Delivery of Antibodies

Subcutaneous (SC) administration is a desired route for monoclonal antibodies (mAbs). However, formulating mAbs for small injection volumes at high concentrations with suitable stability and injectability is a significant challenge. Here, this work presents a platform technology that combines the stability of crystalline antibodies with injectability and tunability of soft hydrogel particles. Composite alginate hydrogel particles are generated via a gentle centrifugal encapsulation process which avoids use of chemical reactions or an external organic phase. Crystalline suspension of anti-programmed cell death protein 1 (PD-1) antibody (pembrolizumab) is utilized as a model therapeutic antibody. Crystalline forms of the mAb encapsuled in the hydrogel particles lead to stable, high concentration, and injectable formulations. Formulation concentrations as high as 315 mg mL-1 antibody are achieved with encapsulation efficiencies in the range of 89-97%, with no perceivable increase in the number of antibody aggregates. Bioanalytical studies confirm superior maintained quality of the antibody in comparison with formulation approaches involving organic phases and chemical reactions. This work illustrates tuning the alginate particles' disintegration by using partially oxide alginates. Crystalline mAb-laden particles are evaluated for their biocompatibility using cell-based in vitro assays. Furthermore, the pharmacokinetics (PK) of the subcutaneously delivered human anti-PD-1 mAb in crystalline antibody-laden alginate hydrogel particles in Wistar rats is evaluated.

Cellulose-based functional hydrogels derived from bamboo for product design

Hydrogels have outstanding research and application prospects in the field of product design. Among them, the design and preparation of cellulose-based functional hydrogels derived from bamboo have attracted increasing research interest. Cellulose-based hydrogels not only have the skeleton function of hydrogels, but also retain excellent specificity, smart structural design, precise molecular recognition ability, and superior biocompatibility. Cellulose-based hydrogels show important application prospects in various fields, such as environmental protection, biomedicine, and energy. What's more, they are potentially viable for application in food packaging and plant agriculture, such as fertilizers release and crop production. Recently, researchers have extracted cellulose from bamboo and generated a variety of cellulose-based functional hydrogels with excellent properties by various cross-linking methods. In addition, a variety of multifunctional hybrid cellulose-based hydrogels have been constructed by introducing functional components or combining them with other functional materials, thus expanding the breadth and depth of their applications. Herein, we elaborate on advances in the field of cellulose-based hydrogels and highlight their applications in food packaging and plant agriculture. Meanwhile, the existing problems and prospects are summarized. The review provides a reference for the further development of cellulose-based hydrogels.

Monte Carlo simulations of weak polyampholyte microgels: pH-dependence of conformation and ionization

We performed Metropolis Monte Carlo simulations to investigate the impact of varying acid and base dissociation constants on the pH-dependent ionization and conformation of weak polyampholyte microgels under salt-free conditions and under explicit consideration of the chemical ionization equilibria of the acidic and basic groups and their electrostatic interaction. Irrespective of their relative acid and base dissociation constant, all of the microgels undergo a pH-dependent charge reversal from positive to negative with a neutral charge at the isoelectric point. This charge reversal is accompanied by a U-shaped swelling transition of the microgels with a minimum of their size at the point of charge neutrality. The width of the U-shaped swelling transition, however, is found to depend on the chosen relative acid and base dissociation constants through which the extent of the favorable electrostatic intramolecular interaction of the ionized acidic and basic groups is altered. The pH-dependent swelling transition of the microgels is found to become broader, the stronger the intramolecular electrostatic interaction of the oppositely charged ionized species is. In addition, the intramolecular charge compensation of the acidic and basic groups of the microgels allows their counterions to abandon the microgel and the associated gain in translational entropy further amplifies the broadening of the pH-dependent swelling transition. The analysis of the radial ionization profiles of the acidic and basic groups of the differently composed microgels reveals a variety of radial ionization patterns with a dependence on the overall charge of the microgels.

Biodegradable zwitterionic poly(carboxybetaine) microgel for sustained delivery of antibodies with extended stability and preserved function

Many recent innovative treatments are based on monoclonal antibodies (mAbs) and other protein therapies. Nevertheless, sustained subcutaneous, oral or pulmonary delivery of such therapeutics is limited by the poor stability, short half-life, and non-specific interactions between the antibody (Ab) and delivery vehicle. Protein stabilizers (osmolytes) such as carboxybetaine can prevent non-specific interactions within proteins. In this work, a biodegradable zwitterionic poly(carboxybetaine), pCB, based microgel covalently crosslinked with tetra(ethylene glycol) diacrylate (TTEGDA) was synthesized for Ab encapsulation. The resulting microgels were characterized via FTIR, diffusion NMR, small-angle neutron scattering (SANS), and cell culture studies. The microgels were found to contain up to 97.5% water content and showed excellent degradability that can be tuned with crosslinking density. Cell compatibility of the microgel was studied by assessing the toxicity and immunogenicity in vitro. Cells exposed to microgel showed complete viability and no pro-inflammatory secretion of interleukin 6 (IL6) or tumor necrosis factor-alpha (TNFα). Microgel was loaded with Immunoglobulin G (as a model Ab), using a post-fabrication loading technique, and Ab sustained release from microgels of varying crosslinking densities was studied. The released Abs (especially from the high crosslinked microgels) proved to be completely active and able to bind with Ab receptors. This study opens a new horizon for scientists to use such a platform for local delivery of Abs to the desired target with minimized non-specific interactions.

Multistage Extraction of Star Anise and Black Pepper Derivatives for Antibacterial, Antioxidant, and Anticancer Activity

Recently, natural resources have attracted considerable interest for their applications in food security and human health problems. Traditional natural spices, such as star anise and black pepper, played important roles in the pharmaceutical and food industries due to their strong pharmacological activity, antioxidant potential and rare complications. In order to achieve biomasses from the natural product with multiple bioactivities, we developed the multistage extraction method to extract and separate various bioactive compounds from these natural plants. Our work demonstrated that various bioactive-rich extractives were achieved using steam distilled- or oxidative-extraction methods with high extraction yields and purity. Furthermore, the extractives in each step can be used not only as bioactive compounds, but also as a resource to further prepare different derivatives during the next extractive step, providing biomass-saving to a great extent. The extractives obtained with high yields and purities (>82%) were identified by ¹H NMR, ¹³C NMR, FTIR, UV-vis, fluorescence spectroscopy, and high-performance liquid chromatography (HPLC). Moreover, these biomasses display potent antibacterial activities against some types of microorganisms such as S.aureus, S.pyogenes, E.coli, and S.typhi with a lowest MIC of 400 μg/ml for the development of antibacterial agents, significant antioxidant activity as the natural antioxidant for enhancing food shelf-life, and excellent anticancer activity that induces significant cancer cell apoptosis. This work showed the different multistage extracts from natural products, which enable them to be applied in the fields of the pharmaceutical industry and the food industry.

Redox-Active Aqueous Microgels for Energy Storage Applications

The search for new environmental-friendly materials for energy storage is ongoing. In the presented paper, we propose polymer microgels as a new class of redox-active colloids (RACs). The microgel stable colloids are perspective low-viscosity fluids for advanced flow batteries with high volumetric energy density. In this research, we describe the procedure for the anchoring of 4-amino-2,2,6,6-tetramethylpiperidine-1-oxyl (4-amino-TEMPO) redox-active sites to the polymeric chains of water-soluble microgels based on poly(N-isopropylacrylamide)-poly(acrylic acid) interpenetrating networks. Using cyclic voltammetry and EPR spectroscopy, we show that ca. 14% of 4-amino-TEMPO groups retain electroactive properties and demonstrate the reversible redox response. It allows achieving a stable capacity of 2.5 mAh/g, enabling the low-viscous catholyte with a capacity of more than 100 mAh/L.

Dual-Degradable Biohybrid Microgels by Direct Cross-Linking of Chitosan and Dextran Using Azide-Alkyne Cycloaddition

In this work, biocompatible and degradable biohybrid microgels based on chitosan and dextran were synthesized for drug delivery applications. Two kinds of bio-based building blocks, alkyne-modified chitosan and azide-modified dextran, were used to fabricate microgels via single-step cross-linking in water-in-oil emulsions. The cross-linking was initiated in the presence of copper(II) without the use of any extra cross-linkers. A series of pH-responsive and degradable microgels were successfully synthesized by varying the degree of cross-links. The microgels were characterized using ¹H NMR and FTIR spectroscopy which proved the successful cross-linking of alkyne-modified chitosan and azide-modified dextran by copper(II)-mediated click reaction. The obtained microgels exhibit polyampholyte character and can carry positive or negative charges in aqueous solutions at different pH values. Biodegradability of microgels was shown at pH 9 or in the presence of Dextranase due to the hydrolysis of carbonate esters in the microgels or 1,6-α-glucosidic linkages in dextran structure, respectively. Furthermore, the microgels could encapsulate vancomycin hydrochloride (VM), an antibiotic, with a high loading of approximately 93.67% via electrostatic interactions. The payload could be released in the presence of Dextranase or under an alkaline environment, making the microgels potential candidates for drug delivery, such as colon-specific drug release.

Oxidation-Responsive Emulsions Stabilized by Cleavable Metallo-Supramolecular Cross-Linked Microgels

An original route to develop an advanced class of microgel emulsifiers containing stimulable metallo-supramolecular instead of frozen covalent cross-links is reported. The poly(N-isopropylmethacrylamide) (PNiPMAM) chains of the microgel are connected by iron(II)-bis(terpyridine) coordination supramolecular complexes that can be cleaved on demand, leading to unique properties both at interfaces and in volume. The microgel synthesis is not demanding, and the characterization of its supramolecular structure can be precisely achieved by standard methods. Singularly, interfaces of an oil-in-water emulsion stabilized by the supramolecular particles can be triggered at the molecular scale by oxidation of Fe(II) to Fe(III), leading to emulsion breaking. In bulk, we show that a microgel dispersion can indeed be transformed into a polymer solution upon oxidation. Our study paves the way to the discovery of unusual microgel properties as our proof-of-concept can be extended to different supramolecular chemistry and architecture.