An eco-friendly pathway to thermosensitive micellar nanoobjects via photoRAFT PISA: the full guide to poly(N-acryloylpyrrolidin)-block-polystyrene diblock copolymers

Double thermoresponsive graft copolymers with different chain ends: feasible precursors for covalently crosslinked hydrogels

The tailored synthesis of graft copolymers from acrylic and methacrylic monomers can be accomplished solely through photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization. Samples with poly[oligo(ethylene glycol) methacrylate] (POEGMA) backbones synthesized under green light irradiation and poly(N-isopropylacrylamide) (PNIPAM) side chains growing under blue light irradiation are presented. As monitored by temperature-dependent dynamic light scattering (DLS) measurements and temperature-variable nuclear magnetic resonance (NMR) spectroscopy, the architecture of the graft copolymers allows unique two-step lower critical solution temperature (LCST) transitions in aqueous solutions. Meanwhile, different end-groups introduced by the corresponding RAFT agents affect the detailed thermoresponsive behavior remarkably. This RAFT strategy shows more advantages when the multiple trithiocarbonate groups are converted into thiol reactive pyridyl disulfide (PDS) groups via a facile post-polymerization modification. The PDS-terminated graft copolymer can then be regarded as a usable precursor for various applications, such as thermoresponsive hydrogels.

Self-assembly of hydrophobic-amphiphilic diblock copolymers in solution

Thermoresponsive polymers are usually characterized by a locally amphiphilic chain structure and their self-assembly in solution is controlled, in particular, by the surface activity of the monomer units or side chains. We theoretically study the condensed state of a single diblock copolymer molecule consisting of a hydrophobic block and amphiphilic block with hydrophobic groups in the backbone and pendant polar groups. The equilibrium parameters of the polymer globules of different shapes are determined using the mean-field approach to determine the most favorable structure. Morphological diagrams of condensed macromolecules are presented depending on the chain length, amphiphilic block fraction, interaction parameters, and pendant volume and length. The diagrams are compared with those of a copolymer molecule with the same fraction of amphiphilic monomer units which are regularly distributed along the chain. The diblock copolymer molecule is found to form a single spherical or flattened particle, with the core from the hydrophobic block, or a granular micelle consisting of spherical or nearly spherical particles, in agreement with the experimental data in the literature. The optimal chain parameters for self-assembly into a stable single core-shell particle are predicted.

Random and Diblock Thermoresponsive Oligo(ethylene glycol)-Based Copolymers Synthesized via Photo-Induced RAFT Polymerization

Amphiphilic random and diblock thermoresponsive oligo(ethylene glycol)-based (co)polymers were synthesized via photoiniferter polymerization under visible light using trithiocarbonate as a chain transfer agent. The effect of solvent, light intensity and wavelength on the rate of the process was investigated. It was shown that blue and green LED light could initiate RAFT polymerization of macromonomers without an exogenous initiator at room temperature, giving bottlebrush polymers with low dispersity at sufficiently high conversions achieved in 1-2 h. The pseudo-living mechanism of polymerization and high chain-end fidelity were confirmed by successful chain extension. Thermoresponsive properties of the copolymers in aqueous solutions were studied via turbidimetry and laser light scattering. Random copolymers of methoxy- and alkoxy oligo(ethylene glycol) methacrylates of a specified length formed unimolecular micelles in water with a hydrophobic core consisting of a polymer backbone and alkyl groups and a hydrophilic oligo(ethylene glycol) shell. In contrast, the diblock copolymer formed huge multimolecular micelles.

RAFT Emulsion Polymerization of Styrene Using a Poly((N,N-dimethyl acrylamide)-co-(N-isopropyl acrylamide)) mCTA: Synthesis and Thermosensitivity

Thermoresponsive poly((N,N-dimethyl acrylamide)-co-(N-isopropyl acrylamide)) (P(DMA-co-NIPAM)) copolymers were synthesized via reversible addition−fragmentation chain transfer (RAFT) polymerization. The monomer reactivity ratios were determined by the Kelen–Tüdős method to be r_NIPAM = 0.83 and r_DMA = 1.10. The thermoresponsive properties of these copo-lymers with varying molecular weights were characterized by visual turbidimetry and dynamic light scattering (DLS). The copolymers showed a lower critical solution temperature (LCST) in water with a dependence on the molar fraction of DMA in the copolymer. Chaotropic and kosmotropic salt anions of the Hofmeister series, known to affect the LCST of thermoresponsive polymers, were used as additives in the aqueous copolymer solutions and their influence on the LCST was demonstrated. Further on, in order to investigate the thermoresponsive behavior of P(DMA-co-NIPAM) in a confined state, P(DMA-co-NIPAM)-b-PS diblock copolymers were prepared via polymerization induced self-assembly (PISA) through surfactant-free RAFT mediated emulsion polymerization of styrene using P(DMA-co-NIPAM) as the macromolecular chain transfer agent (mCTA) of the polymerization. As confirmed by cryogenic transmission electron microscopy (cryoTEM), this approach yielded stabilized spherical micelles in aqueous dispersions where the PS block formed the hydrophobic core and the P(DMA-co-NIPAM) block formed the hydrophilic corona of the spherical micelle. The temperature-dependent behavior of the LCST-type diblock copolymers was further studied by examining the collapse of the P(DMA-co-NIPAM) minor block of the P(DMA-co-NIPAM)-b-PS diblock copolymers as a function of temperature in aqueous solution. The nanospheres were found to be thermosensitive by changing their hydrodynamic radii almost linearly as a function of temperature between 25 °C and 45 °C. The addition of kosmotropic salt anions, as a potentially useful tuning feature of micellar assemblies, was found to increase the hydrodynamic radius of the micelles and resulted in a faster collapse of the micelle corona upon heating.

Synthesis of Poly(methacrylic acid)-block-Polystyrene Diblock Copolymers at High Solid Contents via RAFT Emulsion Polymerization

The combination of polymerization-induced self-assembly (PISA) and reversible-addition fragmentation chain transfer (RAFT) emulsion polymerization offers a powerful technique to synthesize diblock copolymers and polymeric nanoparticles in a controlled manner. The RAFT emulsion diblock copolymerization of styrene and methacrylic acid (MAA) by using a trithiocarbonate as surfactant and RAFT agent was investigated. The Z-group of the RAFT agent was modified with a propyl-, butyl- and dodecyl- sidechain, increasing the hydrophobicity of the RAFT agent to offer well-controlled polymerization of poly(methacrylic acid)-block-polystyrene (PMAA-b-PS) diblock copolymers at high solid contents between 30-50 wt% in water. The kinetic data of the PMAA homopolymerization with the three different RAFT agents for various solvents was investigated as well as the RAFT emulsion polymerization of the diblock copolymers in pure water. While the polymerization of PMAA-b-PS with a propyl terminus as a Z-group suffered from slow polymerization rates at solid contents above 30 wt%, the polymerization with a dodecyl sidechain as a Z-group led to full conversion within 2 h, narrow molar mass distributions and all that at a remarkable solid content of up to 50 wt%.

Selective Swelling and Functionalization of Integral Asymmetric Isoporous Block Copolymer Membranes

SNIPS stands for a membrane fabrication technique that combines the evaporation induced self-assembly of the block copolymers and the classical nonsolvent induced phase separation. It is a one-step readily scalable technique to fabricate integral asymmetric isoporous membranes. The prominent developments in the last decade have carved out a niche for SNIPS as a potential technique to fabricate next generation isoporous membranes. In the last decade, a rich polymer library and variety of membrane postmodification routes have been successfully implemented to fabricate SNIPS membranes having the desired pore functionality. Some of these membranes form soft nanochannels in hydrated state due to swelling of the pore wall, i.e., the pore forming block of the block copolymer. These membranes having soft nanochannels have demonstrated the potential to perform several challenging separation tasks in ultrafiltration and nanofiltration. This paper highlights the currently accessible pore functionality, the strategies to tune the swelling of the soft nanochannels, the potential applications, and future perspectives of these membranes.

A Highly Selective Polymer Material using Benzo-9-Crown-3 for the Extraction of Lithium in Presence of Other Interfering Alkali Metal Ions

The recovery of lithium from global water resources continues to be challenging due to interfering metal ions with similar solution properties. Hence, a lithium-selective diblock copolymer system containing crown ethers (CEs) is developed. A polystyrene-block-poly(methacrylic acid) diblock copolymer is synthesized first via a one-pot solution-emulsion reversible addition-fragmentation chain transfer polymerization. A subsequent Steglich esterification yields the CE functionalized polymer. The complexation properties with different alkali metals are first investigated by liquid-liquid extraction (LLE) in dichloromethane (DCM) - water systems using free benzo-9-crown (B9C3), benzo-12-crown-4 (B12C4), and benzo-15-crown-5 (B15C5) CEs as reference components, followed by the correspondingly CE-functionalized polymers. Extraction complexation constants in the aqueous phase are determined and the impact of the complexation constants on the extractability is estimated. The B9C3 CE is especially appealing since it has the smallest cavity size among all CEs. It is too small to complex sodium or potassium ions; however, it forms sandwich complexes with a lithium-ion resulting in extraordinary complexation constants in polymer systems avoiding other interfering alkali metal ions. On this basis, a new material for the efficient extraction of lithium ion traces in global water resources is established.

Well-defined polyvinylpyridine-block-polystyrene diblock copolymers via RAFT aqueous-alcoholic dispersion polymerization: synthesis and isoporous thin film morphology

This work presents the synthesis of polyvinylpyridine-polystyrene (PVP-b-PS) diblock copolymers via RAFT dispersion polymerization. Spin-coated PVP-b-PS films were converted into porous surfaces by a controlled alignment and swelling strategy.