Dopamine-modified magnetic graphene oxide as a recoverable sorbent for the preconcentration of metal ions by an effervescence-assisted dispersive micro solid-phase extraction procedure

Advancements in effervescent-assisted dispersive micro-solid phase extraction for the analysis of emerging pollutants

Emerging pollutants pose an increasing threat to the environment and human well-being, requiring substantial progress in analytical methodologies. Dispersive micro-solid phase extraction (μ-dSPE) has proven successful in detecting and measuring these contaminants, particularly in trace quantities. However, challenges persist in achieving a uniform sorbent distribution and efficient separation from the sample matrix. To address these issues, effervescent-assisted dispersive micro-solid phase extraction (EA-μ-dSPE) was developed. This method uses on-site produced carbon dioxide as a dispersing agent, eliminating the need for vortexing or ultrasonication. Due to the sorbent dispersion in the sample solution, the contact surface between the analyte and the sorbent increases, resulting in increased extraction efficiency, reduced extraction time, and promotes of sustainability. Several parameters are critical to the successful execution of this procedure to extract the analytes, including the type and structure of sorbent, composition of dispersing agents, sorbent separation procedure, and type and properties of desorption solvents. The sorbent plays a critical role in successful extraction of emerging pollutants. It is clear that for the extraction of the analyte on the sorbent, proper interaction must be established between the analyte and the sorbent via physical and chemical interactions. This review thoroughly evaluates the underlying principles of the approach, its potential, and the significant advancements that have been documented. It explores the method's capacity to analyse and identify emerging pollutants, emphasising its potential across various sample matrices for enhanced pollutant identification and quantification.

Rapid Determination of Three Organic Acids in Polygonum Vivipari Rhizoma via One Marker by HPLC-UV at Equal Absorption Wavelength and Effervescence-Assisted Matrix Solid-Phase Dispersion

A rapid HPLC-UV method for the determination of three organic acids (neochlorogenic acid, chlorogenic acid, and cryptochlorogenic acid) in Polygoni Vivipari Rhizoma (PVR) by one marker was developed. The sample was prepared by effervescence-assisted matrix solid-phase dispersion (EA-MSPD). The separation of compounds was performed on a Poroshell column. The equal absorption wavelength was set as follows: 292 nm (0∼7 min) and 324 nm (7∼10 min). The analytical time including sample extraction and HPLC separation time was 12 min. The analytical method validation such as accuracy (recoveries 99.85%-106.29% and RSD < 2.9%), precision (RSD < 1.3%), reproducibility (RSD < 1.7%), and stability tests (RSD < 0.7% in 24 h) proved that the established HPLC method was suitable for determination of three organic acids in PVR. The contents of three analytes obtained by the external standard method with three markers and the equal absorption wavelength method with one marker were similar (RSD ≤ 2.0%). The developed method, which is rapid and reference compound saving, is an improved quality evaluation method of PVR.

Room temperature fabrication of magnetic covalent organic frameworks for efficient enrichment of parabens in water

A novel 4 + 2 covalent magnetic organic framework (COF) with core-shell structure was synthesized for the first time with N, N, N', N'-Tetrakis (4-aminophenyl)-1, 4- benzenediamine (TPDA) and 2, 6-Pyridinedicarboxaldehyde (PCBA) at room temperature. The synthesized magnetic TPDA-PCBA-COF has a large specific surface area and superparamagnetism, which makes it an ideal sorbent for trace analytes enrichment. To this end, we combined it with magnetic solid phase extraction (MSPE) to enrich trace parabens in environmental water. The parameters affecting the enrichment efficiency of magnetic solid phase extraction, such as the amount of Fe₃O₄@TPDA-PCBA-COF, extraction time, pH of samples, salt concentration, desorption solvent volume and desorption time, were optimized. A simple method for extraction and determination of parabens in water samples by MSPE combined with high performance liquid chromatography (HPLC) was established under optimized conditions. The validation results revealed that the linear ranges were at 1.0-5.0 × 10² ng mL^-1 with R value between 0.9915 and 0.9999, the spiked recoveries were in the range of 82.8% to 99.9% and RSDs were lower than 10%. The method was further applied to the determination of parabens in water samples, with recoveries in the range of 82.2% to 110.0% and RSDs ≤ 7.7%. These results suggest that the magnetic TPDA-PCBA-COF could be used as a promising adsorbent for efficient extraction and quantitation of parabens in environmental water samples.

Insights into a new alternative method with graphene oxide/polyacrylamide/Fe3O4 nanocomposite for the extraction of six odor-active esters from Strong-aroma types of Baijiu

•

A novel approach of MSPE-GC/MS based on GO/PAM/Fe₃O₄ was developed for odor-active esters determination in Baijiu samples.

•

GO/PAM/Fe₃O₄ earned highly selective recognition properties and larger adsorption capacities for six odor-active esters.

•

The method provided lower LODs, better precision and faster separation.

Liquid-liquid extraction (LLE) is the most commonly utilized technique for the extraction of odor-active esters (OAEs) in strong-aroma types of Baijiu (SAB). However, since the contents of different OAEs in SAB vary widely, it is still a puzzle to ensure that all OAEs to be thoroughly extracted by LLE without the problem of saturated adsorption. Herein, a novel approach of magnetic solid phase extraction (MSPE), based on the magnetic graphene oxide nanocomposite modified with polyacrylamide (GO/PAM/Fe₃O₄), was employed for the efficient extraction of six OAEs from SAB. Compared with LLE, GO/PAM/Fe₃O₄ exhibited highly selective recognition properties and larger adsorption capacities for OAEs (ranging from 13.68 to 39.06 mg/g), resulting in better extraction performances for OAEs. Coupled with GC–MS, six OAEs in real SAB were successfully determined, with recoveries ranged from 70.1 ∼ 90.0% and LODs at 0.08 ∼ 1.35 µg/L. Overall, the MSPE-GC/MS is a promising alternative for accurate determination of OAEs in SAB.

Preparation of beta-cyclodextrin based nanocomposite for magnetic solid-phase extraction of organic ultraviolet filters

A simple and efficient analytical method for organic UV filters (UV-Fs) in environmental samples has been established in this study. Taking advantage of the hydrophobicity on the inner cavity, hydrophilicity on the outer wall, and host-guest interaction provided by beta-cyclodextrin, a core-shell magnetic extraction material was firstly synthesized by using a facile method. The extractant was utilized in magnetic solid-phase extraction of UV-Fs in complex environmental samples, including beach sand, sediment and river water samples, followed by the quantitation using high-performance liquid chromatography. A series of factors affecting extraction efficiencies of seven UV-Fs were profoundly optimized. Under the optimal conditions, the linear ranges were at 5.0-5.0 × 10² ng mL^-1 for the UV-Fs with regression coefficients (r) at 0.9984-0.9998. The limits of detection were from 0.12 to 1.4 ng mL^-1. The recoveries were in the range of 84.2-109%. Furthermore, the molecular dynamics simulations and independent gradient model analysis were applied to reveal the adsorption configuration and interaction mechanisms between target analytes and the sorbent.

Automated Solid Phase Extraction of Cd(II), Co(II), Cu(II) and Pb(II) Coupled with Flame Atomic Absorption Spectrometry Utilizing a New Sol-Gel Functionalized Silica Sorbent

In this study a simple and sensitive on-line sorbent extraction platform coupled with flame atomic absorption spectrometry for trace metals determination was developed. The system utilized for the first time a novel sol-gel thiocyanatopropyl functionalized silica as adsorbent for metal’s separation and preconcentration. The main factors affecting the performance of the on-line system were investigated and optimized. The effect of potential interfering species that occur naturally in environmental and biological samples, as well as some toxic elements, was evaluated. Under optimum conditions the enhancement factors ranged between 73 and 152 for the target analytes. The LODs of the proposed methods were 0.15 μg L−1 for Cd(II), 0.5 μg L−1 for Co(II), 0.5 μg L−1 for Cu(II) and 1.9 μg L−1 for Pb(II) for 120 s preconcentration time. The relative standard deviation values for all elements were less than 3.8%, indicating good method precision. Moreover, the sol-gel thiocyanatopropyl functionalized silica-packed microcolumns exhibited limited flow resistance and excellent packing reproducibility. Finally, the proposed method was utilized for the analysis of environmental and biological samples.

Amine functionalized polyacrylonitrile fibers for the selective preconcentration of trace metals prior to their on-line determination by ICP-MS

Amine functionalized polyacrylonitrile fibers (PANFs) were prepared and applied for the simultaneous separation and preconcentration of V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii) from environmental water samples in this paper. The functional PANFs were first prepared by nucleophilic substitution reaction between hydroxylamine hydrochloride and polyacrylonitrile fibers, and then the reactant obtained in the first step was subjected to a ring opening reaction with epichlorohydrin, followed by modification with triethylenetetramine (TETA). The structure of the final polymer fibers was analyzed by Fourier transform infrared spectroscopy (FT-IR), and the morphology was characterized by scanning electron microscopy (SEM). A home-made solid phase extraction (SPE) pretreatment column was filled with PANFs, and then online connected with inductively coupled plasma mass spectrometry (ICP-MS) for quantitative determination of metal ions. Under the optimized experimental conditions, the target metal ions were eluted rapidly and quantitatively using 0.3 mol L-1 HNO3 solution. Only with 30 mL sample solution, high enrichment factors of 120 were obtained for V(v), As(iii), Sn(iv) and Sb(iii), and 115 for Bi(ii), respectively. The detection limits achieved were low: 1.2, 0.9, 1.7, 1.5 and 2.3 ng L-1 for V(v), As(iii), Sn(iv), Sb(iii) and Bi(ii), respectively, and the relative standard deviations (RSDs) were below 3.0%. The advanced fiber materials prepared in this work have the advantages of low cost, environmental friendliness and high adsorption efficiency, and the on-line preconcentration method has greatly improved the analysis efficiency. Finally, the feasibility and accuracy of the method were validated by successfully analyzing Certified Reference Materials (CRMs) as well as lake, river and sea water samples.

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

CO2-effervescence assisted dispersive micro solid-phase extraction based on a magnetic layered double hydroxide modified with polyaniline and a surfactant for efficient pre-concentration of heavy metals in cosmetic samples

In this paper, a CO2-effervescence assisted dispersive micro solid-phase extraction procedure (CO2-EA-DμSPE) using a magnetic layered double hydroxide modified with polyaniline and a surfactant (Zn-Al-LDH-PA-DBSNa-Fe3O4) was applied for the pre-concentration of heavy metals (Ni2+, Pb2+, Co2+, and Cd2+). The final analysis of the analytes was carried out by atomic absorption spectroscopy. XRD, FTIR, and SEM studies were used for the characterization of the synthesized nanoadsorbent. For the maximum extraction efficiency, effective factors (including pH, nanoadsorbent dosage, and volume of the eluent) were investigated using the central composite design (CCD) method. Under the optimum conditions, the preconcentration factor was more than 20. The linear ranges for Ni2+, Pb2+, Co2+, and Cd2+ were obtained as (5-550), (7-750), (5-500), and (3-100) ng mL-1, respectively. The proposed method provided low detection limits (1.4, 2.1, 1.5, and 0.9 ng mL-1 for Ni2+, Pb2+, Co2+, and Cd2+, respectively) and suitable repeatability (relative standard deviation values (RSDs) below 6.1%, n = 6). Finally, the current method was successfully used for the extraction of heavy metals from cosmetic samples.