Determination of 38 pharmaceuticals and personal care products in water by lyophilization combined with liquid chromatography-tandem mass spectrometry

For the occurrence of PPCPs from source to tap: A novel approach modified in terms of sample preservation and SPE cartridge to monitor PPCPs in our water supply

BACKGROUND

The ongoing infusion of pharmaceutical and personal care products (PPCPs) into ecosystems sustains a perpetual life cycle and leads to multi-generational exposures. Limited understanding of their environmental impact and their intrinsic ability to induce physiological effect in humans, even at low doses, pose great risks to human health. Few scholarly works have conducted systematic research into the occurrence of PPCPs within potable water systems. Concurrently, the associated monitoring techniques have not been comprehensively examined with regards to the specific nature of drinking water, namely whether the significant presence of disinfectants may influence the detection of PPCPs.

RESULTS

A modified approach in terms of detailed investigation of sample preservation and optimization of an in-lab fabricated solid phase extraction (SPE) cartridge filled with DVB-VP and PS-DVB sorbent was proposed. Favorable methodological parameters were achieved, with correlation coefficients spanning from 0.9866 to 0.9998. The LODs of the PPCPs fluctuated from 0.001 to 2 μg L-1, while the LOQs varied from 0.002 to 5 μg L-1. The analysis of spiked samples disclosed a methodological precision of 2.31-9.86 % and a recovery of 52.4-119 %. We utilized the established method for analyzing 14 water samples of three categories (source water, finished water and tap water) from five centralized water supply plants. A total of 24 categories encompassing 72 PPCPs were detected, with the concentrations of PPCPs manifested a marked decrease from source water to finished water and finally to tap water.

SIGNIFICANCE

Our research meticulously examined the enhancement and purification effects of widely used commercial SPE cartridges and suggested the use of in-lab fabricated SPE cartridges packed with DVB-VP and PS-DVB adsorbents. We also conducted a systematic evaluation of the need to incorporate ascorbic acid and sodium thiosulfate as preservatives for PPCP measurement, in consideration of the unique characteristics of drinking water matrices, specifically, the significant concentration levels of disinfectants. Furthermore, the proposed method was effectively employed to study the presence of PPCPs in source water, finished water, and tap water collected from centralized water supply plants.

Analytical methods for determining environmental contaminants of concern in water and wastewater

Control and prevention of environmental pollution have emerged as paramount global concerns. Anthropogenic activities, such as industrial discharges, agricultural runoff, and improper waste disposal, introduce a wide range of contaminants into various ecosystems. These pollutants encompass organic and inorganic compounds, particulates, microorganisms, and disinfection by-products, posing severe threats to human health, ecosystems, and the environment. Effective monitoring methods are indispensable for assessing environmental quality, identifying pollution sources, and implementing remedial measures. This paper suggests that the development and utilization of highly advanced analytical tools are both essential for the analysis of contaminants in water samples, presenting a foundational hypothesis for the review. This paper comprehensively reviews the development and utilization of highly advanced analytical tools which is mandatory for the analysis of contaminants in water samples. Depending on the specific pollutants being studied, the choice of analytical methods widely varies. It also reveals insights into the diverse applications and effectiveness of these methods in assessing water quality and contaminant levels. By emphasizing the critical role of the reviewed monitoring methods, this review seeks to deepen the understanding of pollution challenges and inspire innovative monitoring solutions that contribute to a cleaner and more sustainable global environment.•Urgent global concerns: control and prevention of pollution from diverse sources.•Varied contaminants, diverse methods: comprehensive review of analytical tools.•Inspiring a sustainable future: innovative monitoring for a cleaner environment.

Optimization and validation of multiresidual extraction methods for pharmaceuticals in Soil, Lettuce, and Earthworms

The presence of human and veterinary pharmaceuticals (PhACs) in the environment poses potential risks. To comprehensively assess these risks, robust multiresidual analytical methods are essential for determining a broad spectrum of PhAC classes in various environmental compartments (soil, plants, and soil organisms). This study optimized extraction methods for analyzing over 40 PhACs from various matrices, including soil, lettuce, and earthworms. A four-step ultrasonic extraction method with varying extraction conditions and subsequent solid phase extraction was developed for soil samples. QuEChERS methods were optimized for extracting PhACs from lettuce and earthworm samples, addressing a literature gap in these less-studied matrices. The quantification of PhACs in soil, lettuce, and earthworm extracts was performed using a single LC-MS/MS method. Following thorough method validation, earthworms and lettuce were exposed to a mixture of 27 pharmaceuticals in a soil environment. The method validation results demonstrated the robustness of these methods for a broad spectrum of PhACs. Specifically, 29 out of 42 PhACs were extracted with an average efficiency > 50% and RSD < 30% from the soil; 40 out of 42 PhACs exhibited average efficiency > 50% and %RSD < 30% from the earthworms, while 39 out of 42 PhACs showed average efficiency > 50% and RSD < 30% from the lettuce. Exposure experiments confirmed the viability of these methods for quantifying a diverse range of PhACs in different environmental compartments. This study presents three thoroughly validated methods for determining more than 40 PhACs in diverse matrices, enabling a comprehensive assessment of PhAC dissemination in the environment.

Prioritization of organic contaminants in a reclaimed water irrigation system using wide-scope LC-HRMS screening

A prioritization procedure was developed and implemented at the local level to identify the most relevant organic contaminants of emerging concern (CECs) in an agricultural area irrigated with reclaimed water. A wide-scope screening methodology based on UPLC-HRMS analysis was applied to holistically characterize the CEC footprint in water and its spatial and temporal variations. One hundred and fifty-eight CECs, including pharmaceuticals, industrial chemicals, and pesticides, among others, were identified with a confidence level of 2 in the water samples investigated. After water treatment in the reclamation plant and transport within the irrigation channel network, more than a hundred compounds were still detected at the location where water is abstracted for crop irrigation. Compound ecotoxicity and occurrence (semi-quantified concentrations or peak intensity) were the parameters used to prioritize CECs in the water used for irrigation. Results pointed at venlafaxine, O-desmethyl-venlafaxine, galaxolidone, theophylline/paraxanthine, oxybenzone, and N-phenyl-1-naphtylamine, among others, as CECs of concern in the investigated area. This study provides a simple and cost-effective approach to detecting site-specific priority pollutants that could otherwise be overlooked by national or European regulations. The prioritization tool provided contributes to rationally designing monitoring and attenuation programs and efficiently managing water resources, by ensuring the safety of reclaimed water applications.

Analysis of authorized coccidiostats in chicken feces and environmental water by ultra-performance liquid chromatography-tandem mass spectrometry based on dispersive solid-phase extraction and lyophilization

A simple, sensitive, and efficient method based on ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was developed for the determination of 8 coccidiostats in chicken feces and environmental water (including sewage, pond water, and lake water) surrounding the farm. Target analytes in chicken feces were extracted with 2% acetic acid in acetonitrile solution, followed by a dispersive solid-phase extraction (DSPE) cleanup step using the mixture of PSA and C18 adsorbents. Environmental water samples were pretreated using a lyophilization approach. Analysis was carried out on a UPLC-MS/MS with the combination of methanol and 0.1% formic acid aqueous solution as the mobile phase under multiple reaction monitoring in positive and negative ionization modes. Results showed that 8 coccidiostats were linear with correlation coefficients higher than 0.99. Method validation was performed using fortified samples, reaching satisfactory recoveries of 75.9%-97.8% in chicken feces and 71.9%-108.2% in environmental water. Limits of detection for 8 analytes in chicken feces and environmental water were 0.03∼2 µg/kg and 0.005∼1 µg/L, respectively. Matrix effects were calculated and strong signal suppression (>50%) for some coccidiostats was observed. The developed method was successfully applied to analyze coccidiostats in chicken feces and environmental water collected from local chicken farms.

Responses of Aroma Related Metabolic Attributes of Opisthopappus longilobus Flowers to Environmental Changes

Opisthopappus longilobus (Opisthopappus) and its descendant species, Opisthopappus taihangensis, commonly thrive on the Taihang Mountains of China. Being typical cliff plants, both O. longilobus and O. taihangensis release unique aromatics. To determine the potential differentiation and environmental response patterns, comparative metabolic analysis was performed on O. longilobus wild flower (CLW), O. longilobus transplant flower (CLT), and O. taihangensis wild flower (TH) groups. Significant differences in the metabolic profiles were found, not within O. longilobus, but between O. longilobus and O. taihangensis flowers. Within these metabolites, twenty-eight substances related to the scents were obtained (one alkene, two aldehydes, three esters, eight phenols, three acids, three ketones, three alcohols, and five flavonoids), of which eugenol and chlorogenic were the primary aromatic molecules and enriched in the phenylpropane pathway. Network analysis showed that close relationships occurred among identified aromatic substances. The variation coefficient (CV) of aromatic metabolites in O. longilobus was lower than O. taihangensis. The aromatic related compounds were significantly correlated with the lowest temperatures in October and in December of the sampled sites. The results indicated that phenylpropane, particularly eugenol and chlorogenic, played important roles in the responses of O. longilobus species to environmental changes.

Enrichment and analysis methods for trace dissolved organic carbon in reverse osmosis effluent: A review

Reverse osmosis (RO) is an essential unit for producing high-quality ultrapure water. The increasingly severe water shortage and water quality deterioration result in reclaimed water as an alternative source for ultrapure water production. However, when using reclaimed water as water sources, the dissolved organic carbon (DOC) in RO permeate exhibits higher concentration and more sophisticated components than when using clean water sources, thus affecting the effluent quality of ultrapure water and the effectiveness of subsequent treatment processes. To optimize the treatment processes, it is crucial to analyze the components of DOC. This review summarizes the enrichment and analysis methods of trace organic matter, and provides recommendations for the analysis and characterization of DOC in RO permeate. The study summarizes the operating conditions and enrichment properties of different enrichment methods, including solid-phase extraction, liquid-liquid extraction, purge-and-trap, lyophilization and rotary evaporation for low-concentration organic compounds, compares the applicability and limitations of different enrichment methods, and proposes the principles for the selection of enrichment methods. In this review, we discuss the application of mass spectrometry (including Fourier transform ion cyclotron resonance mass spectrometry) in the analysis of DOC components, and focus on data processing as the key procedure in analysis of DOC in RO permeate. Despite the advantages of mass spectrometry, an applicable workflow and open-source database are required to improve the reliability of the analysis. The treatability properties of DOC are suggested to be determined by analyzing the component characteristics or in combination with common removal techniques. This study provides theoretical support for a comprehensive analysis of DOC in RO permeates to improve the removal effect.

Analytical key issues and challenges in the LC-MS/MS determination of antibiotics in wastewater

The research on antibiotics occurrence in the aquatic environment has become a hot topic in the last years due to their potential negative effects, associated to possible bacterial antibiotic-resistance, after continuous exposure to these compounds. Most of antibiotic residues are not completely removed in the wastewater treatment plants (WWTPs) and end up in the aquatic environment through treated wastewater (WW). The development of reliable analytical methodologies for the determination of antibiotics in influent (IWW) and effluent wastewater (EWW) is needed with different purposes, among others: monitoring their occurrence in the aquatic environment, performing environmental risk assessment, estimating removal efficiencies of WWTPs, or estimating the consumption of these compounds. In this paper, we perform an in-depth investigation on analytical key issues that pose difficulties in the determination of antibiotics in complex matrices, such as WW, and we identify challenges to be properly addressed for successful analysis. The analytical technique selected was liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS), as it is the most powerful and widely applied at present for antibiotic residues determination. The mass spectrometric behavior of 18 selected antibiotics, the chromatographic performance, ion ratio variations associated to the sample matrix when using different precursor ions or protomers, and the macrolides adsorption to glass vial, were some of the issues studied in this work. On the basis of the detailed study performed, an analytical LC-MS/MS method based on sample direct injection has been developed for quantification of 18 antibiotics in IWW and EWW, allowing their determination at low ng L^-1 levels.

Pesticides in surface freshwater: a critical review

The objective of this study was to critically review studies published up to November 2021 that investigated the presence of pesticides in surface freshwater to answer three questions: (1) in which countries were the studies conducted? (2) which pesticides are most evaluated and detected? and (3) which pesticides have the highest concentrations? Using the Prisma protocol, 146 articles published from 1976 to November 2021 were included in this analysis: 127 studies used grab sampling, 10 used passive sampling, and 9 used both sampling techniques. In the 45-year historical series, the USA, China, and Spain were the countries that conducted the highest number of studies. Atrazine was the most evaluated pesticide (56% of the studies), detected in 43% of the studies using grab sampling, and the most detected in passive sampling studies (68%). The compounds with the highest maximum and mean concentrations in the grab sampling were molinate (211.38 µg/L) and bentazone (53 µg/L), respectively, and in passive sampling, they were oxyfluorfen (16.8 µg/L) and atrazine (4.8 μg/L), respectively. The levels found for atrazine, p,p'-DDD, and heptachlor in Brazil were higher than the regulatory levels for superficial water in the country. The concentrations exceeded the toxicological endpoint for at least 11 pesticides, including atrazine (Daphnia LC₅₀ and fish NOAEC), cypermethrin (algae EC50, Daphnia and fish LC₅₀; fish NOAEC), and chlorpyrifos (Daphnia and fish LC₅₀; fish NOAEC). These results can be used for planning pesticide monitoring programs in surface freshwater, at regional and global levels, and for establishing or updating water quality regulations.

Rapid and sensitive analytical method for the determination of amoxicillin and related compounds in water meeting the requirements of the European union watch list

The presence of antibiotics in the aquatic environment is becoming one of the main research focus of scientists and policy makers. Proof of that is the inclusion of four antibiotics, amongst which is amoxicillin, in the EU Watch List (WL) (Decision 2020/1161/EU)) of substances for water monitoring. The accurate quantification of amoxicillin in water at the sub-ppb levels required by the WL is troublesome due to its physicochemical properties. In this work, the analytical challenges related to the determination of amoxicillin, and six related penicillins (ampicillin, cloxacillin, dicloxacillin, penicillin G, penicillin V and oxacillin), have been carefully addressed, including sample treatment, sample stability, chromatographic analysis and mass spectrometric detection by triple quadrupole. Given the low recoveries obtained using different solid-phase extraction cartridges, we applied the direct injection of water samples using a reversed-phase chromatographic column that allowed working with 100% aqueous mobile phase. Matrix effects were evaluated and corrected using the isotopically labelled internal standard or correction factors based on signal suppression observed in the analysis of spiked samples. The methodology developed was satisfactorily validated at 50 and 500 ng L ^- 1 for the seven penicillins studied, and it was applied to different types of water matrices, revealing the presence of ampicillin in one surface water sample and cloxacillin in three effluent wastewater samples.

[Research progress on lyophilization for pretreatment of emerging organic contaminants in environmental samples]

有机新污染物是一类在先进分析技术帮助下新鉴定的、现有法规未管制的、人为源的有机污染物。有机新污染物主要包括药品与个人护理、农药、全氟化合物、内分泌干扰物等,其会产生内分泌干扰效应、诱发抗性基因传播,还对人类和野生生物的生存与发展构成潜在威胁,因此检测环境样品中的有机新污染物浓度对生态环境和人体健康具有重大意义。由于环境样品中的有机新污染物浓度较低,为了达到检测仪器的检测要求,通常需要对环境样品进行前处理,包括样品的净化和浓缩。冷冻干燥技术是一种在真空干燥条件下通过升华方式去除水分的前处理技术,主要包括样品冷冻、初级干燥和再干燥3个阶段,常用于食品和药品行业。在药品行业中,冷冻干燥技术能维持药品的生物活性和化学活性,保持药品的物理化学特性。近年来,冷冻干燥技术逐步用于环境水样中有机新污染物的前处理。其主要的操作步骤包括水样预处理、冷冻干燥、洗脱、吹干、过滤、定容和上机检测。冷冻干燥技术具有操作简单、低成本、样品处理体积少、样品易保存和处理过程中样品损失少等优点,具有广泛应用于环境样品中有机新污染物监测的潜力。该文综述了环境样品中有机新污染物常见的种类,并重点介绍冷冻干燥技术的原理及其在环境样品前处理过程中的应用,提出了冷冻干燥技术在环境分析中的应用前景,为环境样品中有机新污染物的监测提供了参考。