Isocyanide Ligation Enables Electrochemical Ammonia Formation in a Synthetic Cycle for N2 Fixation

Transition-metal-mediated splitting of N2 to form metal nitride complexes could constitute a key step in electrocatalytic nitrogen fixation, if these nitrides can be electrochemically reduced to ammonia under mild conditions. The envisioned nitrogen fixation cycle involves several steps: N2 binding to form a dinuclear end-on bridging complex with appropriate electronic structure to cleave the N2 bridge followed by proton/electron transfer to release ammonia and bind another molecule of N2. The nitride reduction and N2 splitting steps in this cycle have differing electronic demands that a catalyst must satisfy. Rhenium systems have had limited success in meeting these demands, and studying them offers an opportunity to learn strategies for modulating reactivity. Here, we report a rhenium system in which the pincer supporting ligand is supplemented by an isocyanide ligand that can accept electron density, facilitating reduction and enabling the protonation/reduction of the nitride to ammonia under mild electrochemical conditions. The incorporation of isocyanide raises the N-H bond dissociation free energy of the first N-H bond by 10 kcal/mol, breaking the usual compensation between pKa and redox potential; this is attributed to the separation of the protonation site (nitride) and the reduction site (delocalized between Re and isocyanide). Ammonia evolution is accompanied by formation of a terminal N2 complex, which can be oxidized to yield bridging N2 complexes including a rare mixed-valent complex. These rhenium species define the steps in a synthetic cycle that converts N2 to NH3 through an electrochemical N2 splitting pathway, and show the utility of a second, tunable supporting ligand for enhancing nitride reactivity.

(Electro)chemical N2 Splitting by a Molybdenum Complex with an Anionic PNP Pincer-Type Ligand

Molybdenum(III) complexes bearing pincer-type ligands are well-known catalysts for N2-to-NH3 reduction. We investigated herein the impact of an anionic PNP pincer-type ligand in a Mo(III) complex on the (electro)chemical N2 splitting ([LMoCl3]-, 1 -, LH = 2,6-bis((di-tert-butylphosphaneyl)methyl)-pyridin-4-one). The increased electron-donating properties of the anionic ligand should lead to a stronger degree of N2 activation. The catalyst is indeed active in N2-to-NH3 conversion utilizing the proton-coupled electron transfer reagent SmI2/ethylene glycol. The corresponding Mo(V) nitrido complex 2H exhibits similar catalytic activity as 1H and thus could represent a viable intermediate. The Mo(IV) nitrido complex 3 - is also accessible by electrochemical reduction of 1 - under a N2 atmosphere. IR- and UV/vis-SEC measurements suggest that N2 splitting occurs via formation of an "overreduced" but more stable [(L(N2)2Mo0)2μ-N2]2- dimer. In line with this, the yield in the nitrido complex increases with lower applied potentials.

To Split or Not to Split: [AsCCAs]-Coordinated Mo, W, and Re Complexes and Their Reactivity toward Molecular Dinitrogen

Molybdenum, tungsten, and rhenium halides bearing a 2,2'-(iPr2As)2-substituted diphenylacetylene ([AsCCAs], 1-As) were prepared and reduced under an atmosphere of dinitrogen in order to activate the latter substrate. In the case of molybdenum, a diiodo (2-As) and a triiodo molybdenum precursor (5) were equally suited for reductive N2 splitting, which led to the isolation of [AsCCAs]Mo≡N(I) (3-As) in each case. For tungsten, [AsCCAs]WCl3 (6) was reduced under N2 to afford {[AsCCAs]WCl2}2(N2) (7), which is best described as a dinuclear π8δ4-configured μ-(η1: η1)-N2-bridged dimer. Attempts to reductively cleave the N2 unit in 7 did not lead to the expected tungsten nitride (8), which had to be prepared independently via the treatment of 7 with sodium azide. To arrive at a π10δ4-configured N2-bridged dimer in a tetragonally distorted ligand environment, [AsCCAs]ReCl3 (9) was reduced in the presence of N2. As expected, a μ-(η1: η1)-N2-bridged dirhenium species, namely, {[AsCCAs]ReCl2}2(N2) (10), was formed, but found to very quickly decompose (presumably via loss of N2), not only under reduced pressure, but also upon irradiation or heating. Hence, an alternative synthetic route to the originally envisioned nitride, [AsCCAs]Re≡N(Cl)2 (11), was developed. While all the aforementioned nitrides (3-As, 8, and 11) were found to be fairly robust, significantly different stabilities were noticed for {[AsCCAs]MCl2}2(N2) (7 for M = W, 10 for M = Re), which is ascribed to the electronically different MN2M cores (π8δ4 for 7 vs π10δ4 for 10) in these μ-(η1: η1)-N2-bridged dimers.

Ammonia from dinitrogen at ambient conditions by organometallic catalysts

Fixation of atmospheric dinitrogen in plants by [Mo-Fe] cofactor of nitrogenase enzyme takes place efficiently under atmospheric pressure and normal temperature. In search for an alternative methodology for the highly energy intensive Haber-Bosch process, design and synthesis of highly efficient inorganic and organometallic complexes by mimicking the structure and function of [Mo-Fe] cofactor system is highly desirable for ammonia synthesis from dinitrogen. An ideal catalyst for ammonia synthesis should effectively catalyse the reduction of dinitrogen in the presence of a proton source under mild to moderate conditions, and thereby, significantly reducing the cost of ammonia production and increasing the energy efficacy of the process. In the light of current research, it is evident that there is a plenty of scope for the development and enhanced performance of the inorganic and organometallic catalysts for ammonia synthesis under ambient temperature and pressure. The review furnishes a comprehensive outlook of numerous organometallic catalysts used in the synthesis of ammonia from dinitrogen in the past few decades.

Halide Effects in Reductive Splitting of Dinitrogen with Rhenium Pincer Complexes

Transition metal halide complexes are used as precursors for reductive N₂ activation up to full splitting into nitride complexes. Distinct halide effects on the redox properties and yields are frequently observed yet not well understood. Here, an electrochemical and computational examination of reductive N₂ splitting with the rhenium(III) complexes [ReX₂(PNP)] (PNP = N(CH₂CH₂PtBu₂)₂ and X = Cl, Br, I) is presented. As previously reported for the chloride precursor ( J. Am. Chem. Soc. 2018, 140, 7922), the heavier halides give rhenium(V) nitrides upon (electro-)chemical reduction in good yields yet with significantly anodically shifted electrolysis potentials along the halide series. Dinuclear, end-on N₂-bridged complexes, [{ReX(PNP)}₂(μ-N₂)], were identified as key intermediates in all cases. However, while the chloride complex is exclusively formed via 2-electron reduction and Re^III/Re^I comproportionation, the iodide system also reacts via an alternative Re^II/Re^II-dimerization mechanism at less negative potentials. This alternative pathway relies on the absence of the potential inversion after reduction and N₂ activation that was observed for the chloride precursor. Computational analysis of the relevant Re^III/II and Re^II/I redox couples by energy decomposition analysis attributes the halide-induced trends of the potentials to the dominating electrostatic Re-X bonding interactions over contributions from charge transfer.

Molybdenum-Mediated N2 -Splitting and Functionalization in the Presence of a Coordinated Alkyne

A new [PCCP]-coordinated molybdenum platform comprising a coordinated alkyne was employed for the cleavage of molecular dinitrogen. The coordinated η2 -alkyne was left unaffected during this reduction. DFT calculations suggest that the reaction proceeds via an initially generated terminal N2 -complex, which is converted to a dinuclear μ-(η1 :η1 )-N2 -bridged intermediate prior to N-N bond cleavage. Protonation, alkylation and acylation of the resulting molybdenum nitrido complex led to the corresponding N-functionalized imido complexes. Upon oxidation of the N-acylated imido derivative in MeCN, a fumaronitrile fragment was built up via C-C coupling of MeCN to afford a dinuclear molybdenum complex. The key finding that the strong N≡N bond may be cleaved in the presence of a weaker, but spatially constrained C≡C bond contradicts the widespread paradigm that coordinated alkynes are in general more reactive than gaseous N2 .

Electronic and Spin-State Effects on Dinitrogen Splitting to Nitrides in a Rhenium Pincer System

Bimetallic nitrogen (N₂) splitting to form metal nitrides is an attractive method for N₂ fixation. Although a growing number of pincer-supported systems can bind and split N₂, the precise relationship between the ligand properties and N₂ binding/splitting remains elusive. Here we report the first example of an N₂-bridged rhenium(III) complex, [(trans-P₂^tBuPyrr)ReCl₂]₂(μ-η¹:η¹-N₂) (P₂^tBuPyrr = [2,5-(CH₂P^tBu₂)₂C₄H₂N]^-). In this case, N₂ binding occurs at a higher oxidation level than that in other reported pincer analogues. Analysis of the electronic structure through computational studies shows that the weakly π-donor pincer ligand stabilizes an open-shell electronic configuration that leads to enhanced binding of N₂ in the bridged complex. Utilizing SQUID magnetometry, we demonstrate a singlet ground state for this Re-N-N-Re complex, and we offer tentative explanations for antiferromagnetic coupling of the two local S = 1 sites. Reduction and subsequent heating of the rhenium(III)-dinitrogen complex leads to chloride loss and cleavage of the N-N bond with isolation of the terminal rhenium(V) nitride complex (P₂^tBuPyrr)ReNCl.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.