From X- To J-Aggregation: Subtly Managing Intermolecular Interactions for Superior Phototheranostics with Precise 1064 nm Excitation

The stacking mode in aggregate state results from a delicate balance of supramolecular interactions, which closely affects the optoelectronic properties of organic π-conjugated systems. Then, managing these interactions is crucial for advancing phototheranostics, yet remains challenging. A subtle strategy involving peripheral phenyl groups is debuted herein to transform X-aggregated SQ-H into J-aggregated SQ-Ph, reorienting intermolecular dipole interactions while rationally modulating π-π interactions. Co-assembled with liposomes (DSPE-PEG2000), SQ-Ph nanoparticles (NPs) exhibit low toxicity, superior biocompatibility, and a bathochromic shift to the 1064 nm match-excited NIR-II region, with a fluorescence brightness (ε1064 nm ΦNIR-II) of 4129 M-1 cm-1 and a photothermal conversion efficiency (PCE) of 48.3%. Preliminary in vivo experiments demonstrate that SQ-Ph NPs achieve a signal-to-background ratio (SBR) of up to 14.29 in NIR-II fluorescence imaging (FLI), enabling highly efficient photothermal therapy (PTT) of tumors guided by combined photoacoustic imaging (PAI). This study not only enriches the J-aggregation library but also provides a paradigm for optimizing photosensitizers at the supramolecular level.

Tuning Shortwave-Infrared J-aggregates of Aromatic Ring-Fused Aza-BODIPYs by Peripheral Substituents for Combined Photothermal and Photodynamic Therapies at Ultralow Laser Power

Achieving photothermal therapy (PTT) at ultralow laser power density is crucial for minimizing photo-damage and allowing for higher maximum permissible skin exposure. However, this requires photothermal agents to possess not just superior photothermal conversion efficiency (PCE), but also exceptional near-infrared (NIR) absorptivity. J-aggregates, exhibit a significant redshift and narrower absorption peak with a higher extinction coefficient. Nevertheless, achieving predictable J-aggregates through molecular design remains a challenge. In this study, we successfully induced desirable J-aggregation (λabs max : 968 nm, ϵ: 2.96×105  M-1  cm-1 , λem max : 972 nm, ΦFL : 6.2 %) by tuning electrostatic interactions between π-conjugated molecular planes through manipulating molecular surface electrostatic potential of aromatic ring-fused aza-BODIPY dyes. Notably, by controlling the preparation method for encapsulating dyes into F-127 polymer, we were able to selectively generate H-/J-aggregates, respectively. Furthermore, the J-aggregates exhibited two controllable morphologies: nanospheres and nanowires. Importantly, the shortwave-infrared J-aggregated nanoparticles with impressive PCE of 72.9 % effectively destroyed cancer cells and mice-tumors at an ultralow power density of 0.27 W cm-2 (915 nm). This phototherapeutic nano-platform, which generates predictable J-aggregation behavior, and can controllably form J-/H-aggregates and selectable J-aggregate morphology, is a valuable paradigm for developing photothermal agents for tumor-treatment at ultralow laser power density.

J-Aggregation Strategy toward Potentiated NIR-II Fluorescence Bioimaging of Molecular Fluorophores

Molecular fluorophores emitting in the second near-infrared (NIR-II, 1000-1700 nm) window with strong optical harvesting and high quantum yields hold great potential for in vivo deep-tissue bioimaging and high-resolution biosensing. Recently, J-aggregates are harnessed to engineer long-wavelength NIR-II emitters and show unique superiority in tumor detection, vessel mapping, surgical navigation, and phototheranostics due to their bathochromic-shifted optical bands in the required slip-stacked arrangement aggregation state. However, despite the preliminary progress of NIR-II J-aggregates and theoretical study of structure-property relationships, further paradigms of NIR-II J-aggregates remain scarce due to the lack of study on aggregated fluorophores with slip-stacked fashion. In this effort, how to utilize the specific molecular structure to form slip-stacked packing motifs with J-type aggregated exciton coupling is emphatically elucidated. First, several molecular regulating strategies to achieve NIR-II J-aggregates containing intermolecular interactions and external conditions are positively summarized and deeply analyzed. Then, the recent reports on J-aggregates for NIR-II bioimaging and theranostics are systematically summarized to provide a clear reference and direction for promoting the development of NIR-II organic fluorophores. Eventually, the prospective efforts on ameliorating and promoting NIR-II J-aggregates to further clinical practices are outlined.

Sterically Allowed H-type Supramolecular Polymerizations

The functionalization of π-conjugated scaffolds with sterically demanding substituents is a widely used tactic to suppress cofacial (H-type) stacking interactions, which may even inhibit self-assembly. Contrary to expectations, we demonstrate herein that increasing steric effects can result in an enhanced thermodynamic stability of H-type supramolecular polymers. In our approach, we have investigated two boron dipyrromethene (BODIPY) dyes with bulky phenyl (2) and mesityl (3) meso-substituents and compared their self-assembly in nonpolar media with that of a parent meso-methyl BODIPY 1 lacking bulky groups. While the enhanced steric demand induces pathway complexity, the superior thermodynamic stability of the H-type pathways can be rationalized in terms of additional enthalpic gain arising from intermolecular C-H⋅⋅⋅F-B interactions of the orthogonally arranged aromatic substituents, which overrule their inherent steric demand. Our findings underline the importance of balancing competing non-covalent interactions in self-assembly.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Ultra-Narrowband Near-Infrared Responsive J-Aggregates of Fused Quinoidal Tetracyanoindacenodithiophene

Narrowband photoresponsive molecules are highly coveted in high-resolution imaging, sensing, and monochromatic photodetection, especially those extending into the near-infrared (NIR) spectral range. Here, a new class of J-aggregating materials based on quinoidal indacenodithiophenes (IDTs) that exhibit an ultra-narrowband (full width half maxima of 22 nm) NIR absorption peak centered at 770 nm is reported. The spectral width is readily tuned by the length of the solubilizing alkyl group, with longer chains resulting in significant spectral narrowing. The J-aggregate behavior is confirmed by a combination of excited state lifetime measurements and single-crystal X-ray diffraction measurements. Their utility as electron-transporting materials is demonstrated in both transistor and phototransistor devices, with the latter demonstrating good response at NIR wavelengths (780 nm) over a range of intensities.

Hybridization of triphenylamine to BODIPY dyes at the 3,5,8-positions: A facile strategy to construct near infra-red aggregation-induced emission luminogens with intramolecular charge transfer for cellular imaging

A series of five BODIPY derivatives with triarylamine (TPA) moieties on their 3-, 5-, or 8-positions were reported, which showed wide-range fluorescence emissions across red and near infrared regions in their aggregation states. The influences of numbers and substituted positions of TPA groups on the optical and aggregation-induced emission (AIE) properties of these BODIPYs as well as organelle-specific imaging in live cells were investigated. The TPA groups installed at 3-/5-positions of BODIPY could effectively enlarge the conjugated system and red-shift the absorption and emission bands (λ_em^max up to 815 nm). In contrast, the TPA group linked to 8-position of BODIPY core has little contribution to decrease the HOMO-LUMO energy gap. Importantly, regardless the substitution positions of TPA groups, all these TPA-substituted BODIPYs (BTs) showed remarkable AIE performance and possessed high molar extinction absorption (up to ∼ 63000 M^-1 cm^-1), two-photon absorption (up to 171 GM at 870 nm), and large Stokes shifts. The BODIPY with one TPA group (BT1 and FBT1) showed lipid droplets-specific localization while BODIPY with two and three TPA groups (BT2, BT3 and FBT2) preferred to enrich in lysosomes. These BODIPYs all have been successfully used in tracking the dynamic behaviors of lipid droplets or lysosomes in living cells. Furthermore, BT1 and FBT1 can quantitatively detect the overexpression of lipid droplets, and BT3 has been successfully used to observe lysosomes behaviors of lipophagy process in living cells. This work systematically studied the influence of the number and position of TPA units on the optical properties and AIE-activities of BODIPYs, which not only enriched the BODIPY-based AIE NIR probes for organelle-specific imaging in live cells, but also provided a practical strategy for the effective construction of organic dyes with NIR AIE activity.

Unconventional OFF-ON Response of a Mono(calix[4]arene)-Substituted BODIPY Sensor for Hg2+ through Dimerization Reversion

A new selective fluorogenic chemosensor for Hg²⁺, which combines a calixarene derivative with a BODIPY core as a fluorescent reporter, is described. The remarkable change in its fluorogenic properties in DMSO and CHCl₃ has been analyzed. A study of its spectral properties on dilution, along with molecular modeling studies, allowed us to explain that this behavior involves the formation of a J-dimer, as well as how the sensing mechanism of Hg²⁺ proceeds.

J-aggregation strategy of organic dyes for near-infrared bioimaging and fluorescent image-guided phototherapy

With the continuous development of organic materials for optoelectronic devices and biological applications, J-aggregation has attracted a great deal of interest in both dye chemistry and supramolecular chemistry. Except for the characteristic red-shifted absorption and emission, such ordered head-to-tail stacked structures may be accompanied by special properties such as enhanced absorption, narrowed spectral bandwidth, improved photothermal and photodynamic properties, aggregation-induced emission enhancement (AIEE) phenomenon, and so forth. These excellent properties add great potential to J-aggregates for optical imaging and phototherapy in the near-infrared (NIR) region. Despite decades of development, the challenge of rationally designing the molecular structure to adjust intermolecular forces to induce J-aggregation of organic dyes remains significant. In this review, we discuss the formation of J-aggregates in terms of intermolecular interactions and summarize some recent studies on J-aggregation dyes for NIR imaging and phototherapy, to provide a clear direction and reference for designing J-aggregates of near-infrared organic dyes to better enable biological applications. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Diagnostic Tools > In Vivo Nanodiagnostics and Imaging Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease.

In Situ Formation of o-Phenylenediamine Cascade Polymers Mediated by Metal-Organic Framework Nanozymes for Fluorescent and Photothermal Dual-Mode Assay of Acetylcholinesterase Activity

A fluorescent and photothermal dual-mode assay method was established for the detection of acetylcholinesterase (AChE) activity based on in situ formation of o-phenylenediamine (oPD) cascade polymers. First, copper metal-organic frameworks of benzenetricarboxylic acid (Cu-BTC) were screened out as nanozymes with excellent oxidase-like activity and confinement catalysis effect. Then, an ingenious oPD cascade polymerization strategy was proposed. That is, oPD was oxidized by Cu-BTC to oPD oligomers with strong yellow fluorescence, and oPD oligomers were further catalyzed to generate J-aggregation, which promotes the formation of oPD polymer nanoparticles with a high photothermal effect. By utilizing thiocholine (enzymolysis product of acetylthiocholine) to inhibit the Cu-BTC catalytic effect, AChE activity was detected through the fluorescence-photothermal dual-signal change of oPD oligomers and polymer nanoparticles. Both assay modes have low detection limitation (0.03 U L^-1 for fluorescence and 0.05 U L^-1 for photothermal) and can accurately detect the AChE activity of human serum (recovery 85.0-111.3%). The detection results of real serum samples by fluorescent and photothermal dual modes are consistent with each other (relative error ≤ 5.2%). It is worth emphasizing that this is the first time to report the high photothermal effect of oPD polymers and the fluorescence-photothermal dual-mode assay of enzyme activity.

Discovery of BODIPY J-aggregates with absorption maxima beyond 1200 nm for biophotonics

Organic dyes with absorption maxima in the second near-infrared window (NIR-II; 1000 to 1700 nm) are of great interest in biophotonics. However, because of the lack of appropriate molecular scaffolds, current research in this field is limited to cyanine dyes, and developing NIR-II-absorbing organic dyes for biophotonics remains an immense challenge. Here, we rationally designed an ethenylene-bridged BODIPY scaffold featuring excellent J-aggregation capabilities and revealed that the bridging ethylene unit is crucial for intermolecular J-coupling regulation. By integrating the electron-donating groups into the scaffold, we obtained a BODIPY dye, BisBDP2, with a J-aggregate absorption maximum of around 1300 nm. BisBDP2 J-aggregates show excellent photothermal performance, including intense photoacoustic response, and a high photothermal conversion efficiency value of 63%. In vivo results demonstrate the potential of J-aggregates for photoacoustic imaging and photothermal ablation of deep-seated tumors. This study will speed up the exploration of NIR-II-absorbing J-aggregates for future biophotonic applications.

Aggregation behavior and spectroscopic properties of red-emitting distyryl-BODIPY in aqueous solution, Langmuir-Schaefer films and Pluoronic® F127 micelles

Red-emitting distyryl substituted BODIPY dyes are among the most promising luminophors for bioimaging and optics applications. However, the practical application of BODIPYs is limited due to their high hydrophobicity and tendency to aggregate in aqueous organic solutions and solid phase. In this article, we propose an elegant solution to this problem. To this end, we carried out the detailed experimental and quantum-chemical study of the structural and spectral features of BF₂-ms-phenyl-5,5'-bis(4-dimethylaminostyryl)-3,3'-dimethyl-2,2'-dipyrromethene (distyryl-BDP). The particular attention was paid to analysis of high sensitivity of the distyryl-BDP spectral characteristics to the solvent properties, and also the aggregation behavior features both in water-organic media and in mono- and multilayer Langmuir-Schaefer films. We selected the best conditions to obtain the hydrophilic micellar structures of distyryl-BDP with Pluronic® F127 having a high efficiency of dye solubilization. This method increasing the solubility improves the distyryl-BDP transport efficiency in physiological aqueous media. The aqueous solutions of distyryl-BDP-Pl micelles show the intense fluorescence in the phototherapy window region (λ_fl = 739 nm).

Nitric-Oxide-Releasing aza-BODIPY: A New Near-Infrared J-Aggregate with Multiple Antibacterial Modalities

The development of near-infrared (NIR) J-aggregates has received increasing attention due to their broad applications. Here, we report the nitrosation of an amine-containing aza-BODIPY precursor (BDP-NH₂ ), affording the first nitric oxide (NO)-releasing NIR J-aggregate (BDP-NO). The introduction of N-nitrosamine moieties efficiently inhibits the aromatic interactions of BDP-NH₂ , which instead promotes the formation of J-aggregates within micellar nanoparticles with a remarkable bathochromic shift of ≈109 nm to the NIR window (820 nm). Interestingly, the NO release and photothermal conversion efficiency (PTCE) can be delicately tuned by the loading contents of BDP-NO within micellar nanoparticles, thereby enabling multiple antibacterial modalities by exploring either NO release, photothermal therapy (PTT), or both. We demonstrate the combination of NO and PTT can elevate antibacterial activity while attenuating PTT-associated inflammation for the in vivo treatment of MRSA infection.

Interfacing DNA nanotechnology and biomimetic photonic complexes: advances and prospects in energy and biomedicine

Self-assembled photonic systems with well-organized spatial arrangement and engineered optical properties can be used as efficient energy materials and as effective biomedical agents. The lessons learned from natural light-harvesting antennas have inspired the design and synthesis of a series of biomimetic photonic complexes, including those containing strongly coupled dye aggregates with dense molecular packing and unique spectroscopic features. These photoactive components provide excellent features that could be coupled to multiple applications including light-harvesting, energy transfer, biosensing, bioimaging, and cancer therapy. Meanwhile, nanoscale DNA assemblies have been employed as programmable and addressable templates to guide the formation of DNA-directed multi-pigment complexes, which can be used to enhance the complexity and precision of artificial photonic systems and show the potential for energy and biomedical applications. This review focuses on the interface of DNA nanotechnology and biomimetic photonic systems. We summarized the recent progress in the design, synthesis, and applications of bioinspired photonic systems, highlighted the advantages of the utilization of DNA nanostructures, and discussed the challenges and opportunities they provide.

Chemical Design of Activatable Photoacoustic Probes for Precise Biomedical Applications

Photoacoustic (PA) imaging technology, a three-dimensional hybrid imaging modality that integrates the advantage of optical and acoustic imaging, has great application prospects in molecular imaging due to its high imaging depth and resolution. To endow PA imaging with the ability for real-time molecular visualization and precise biomedical diagnosis, numerous activatable molecular PA probes which can specifically alter their PA intensities upon reacting with the targets or biological events of interest have been developed. This review highlights the recent developments of activatable PA probes for precise biomedical applications including molecular detection of the biotargets and imaging of the biological events. First, the generation mechanism of PA signals will be given, followed by a brief introduction to contrast agents used for PA probe design. Then we will particularly summarize the general design principles for the alteration of PA signals and activatable strategies for developing precise PA probes. Furthermore, we will give a detailed discussion of activatable PA probes in molecular detection and biomedical imaging applications in living systems. At last, the current challenges and outlooks of future PA probes will be discussed. We hope that this review will stimulate new ideas to explore the potentials of activatable PA probes for precise biomedical applications in the future.

Supramolecular J-aggregates of aza-BODIPY by Steric and π-π Interactions for NIR-II Phototheranostic

Achieving J-aggregation of a molecule is a fascinating way to construct fluorescent imaging as well as photothermal therapy agents in the second near-infrared window. Modulation of the balance between intermolecular...

Facile synthesis of near-infrared bodipy by donor engineering for in vivo tumor targeted dual-modal imaging

Bodipy is one of the most popular dyes for bioimaging, however, a complicated synthetic protocol is needed to create and isolate ideal near-infrared (NIR) emissive Bodipy derivatives for optical bioimaging. It is noticed that the donor species impact the wavelength when the π-conjugation system of green light emissive Bodipy is elongated via a one-step reaction. Herein, several Bodipy dyes bearing different common donors are synthesized. Their optical properties confirm that both absorption and emission peaks of the synthesized Bodipy could be tuned to NIR wavelength by using stronger donors via a facile reaction. The synthesized monocarboxyl Bodipy could conjugate with aminated PEG to yield an amphiphilic polymer, which further self-assembles into a NIR nanoparticle (NP). The NIR NP exhibits preferential tumor accumulation via the enhanced permeation and retention (EPR) effect, making it useful for tumor diagnosis by both fluorescence imaging and photoacoustic tomography.

Solvent-Directed Transformation of the Self-assembly and Optical Property of a Peptide-Appended Core-Substituted Naphthelenediimide and Selective Detection of Nitrite Ions in an Aqueous Medium

This study vividly displays the different self-assembling behavior and consequent tuning of the fluorescence property of a peptide-appended core-substituted naphthalenediimide (N1) in the aliphatic hydrocarbon solvents (n-hexane/n-decane/methyl cyclohexane) and in an aqueous medium within micelles. The N1 is highly fluorescent in the monomeric state and self-aggregates in a hydrocarbon solvent, exhibiting "H-type" or "face-to-face" stacking as indicated by a blue shift of absorption maxima in the UV-vis spectrum. In the H-aggregated state, the fluorescence emission of N1 changes to green from the yellow emission obtained in the monomeric state. In the presence of a micelle-forming surfactant, cetyl trimethylammonium bromide (CTAB), the N1 is found to be dispersed in a water medium. Interestingly, upon encapsulation of N1 into the micelle, the molecule alters its self-assembling pattern and optical property compared to its behavior in the hydrocarbon solvent. The N1 exhibits "edge-to-edge" stacking or J aggregates inside the micelle as indicated by the UV-vis spectroscopic study, which shows a red shift of the absorption maxima compared to that in the monomeric state. The fluorescence emission also differs in the water medium with the NDI derivative exhibiting red emission. FT-IR studies reveal that all amide NHs of N1 are hydrogen-bonded within the micelle (in the J-aggregated state), whereas both non-bonding and hydrogen-bonding amide NHs are present in the H-aggregated state. This is a wonderful example of solvent-mediated transformation of the aggregation pattern (from H to J) and solvatochromism of emission over a wide range from green in the H-aggregated state to yellow in the monomeric state and orangish-red in the J-aggregated state. Moreover, the J aggregate has been successfully utilized for selective and sensitive detection of nitrite ions in water even in the presence of other common anions (NO₃^-, SO₄^2-, HSO₄^-, CO₃^2-, and Cl^-).

Leveraging BODIPY nanomaterials for enhanced tumor photothermal therapy

In the past ten years, photothermal therapy (PTT) has attracted widespread attention in tumor treatment due to its non-invasiveness and little side effects. PTT utilizes heat produced by photothermal agents under the irradiation of near-infrared light to kill tumor cells. Boron-dipyrromethene (BODIPY), an organic phototherapy agent, has been widely used in tumor phototherapy due to its higher molar extinction coefficient, robust photostability and good phototherapy effect. However, there are some issues in the application of BODIPY for tumor PTT, such as low photothermal conversion efficiency and short absorption wavelength. In this review, we focus on the latest development of BODIPY nanomaterials for overcoming the above problems and enhancing the PTT effect.

GlycoBODIPYs: Sugars Serving as a Natural Stock for Water-soluble Fluorescent Probes of Complex Chiral Morphology

A range of unprocessed, reducing sugar substrates (mono-, di-, and trisaccharides) is shown to take part in a straightforward four-step synthetic route to water-soluble, uncharged BODIPY derivatives with unimpaired chiral integrity and high fluorescence efficiency. A wide compatibility with several postfunctionalizations is demonstrated, thus suggesting a universal utility of the multifunctional glycoconjugates, which we call GlycoBODIPYs. Knoevenagel condensations are able to promote a red-shift in the spectra, thereby furnishing strongly fluorescent red and far-red glycoconjugates of high hydrophilicity. The synthetic outcome was studied by X-ray crystallography and by comprehensive photophysical investigations in several solvent systems. Furthermore, cell experiments illustrate efficient cell uptake and demonstrate differential cell targeting as a function of the integrated chiral information.

Direct C–H alkoxylation of BODIPY dyes via cation radical accelerated oxidative nucleophilic hydrogen substitution: a new route to building blocks for functionalized BODIPYs

A convenient C–H alkoxylation reaction between BODIPY dyes and a variety of alcohols was developed via a cation radical accelerated oxidative nucleophilic hydrogen substitution.