Luminescent polypyridyl heteroleptic CrIII complexes with high quantum yields and long excited state lifetimes

Luminescence and Excited-State Reactivity in a Heteroleptic Tricyanido Fe(III) Complex

Harnessing sunlight via photosensitizing molecules is key for novel optical applications and solar-to-chemical energy conversion. Exploiting abundant metals such as iron is attractive but becomes challenging due to typically fast nonradiative relaxation processes. In this work, we report on the luminescence and excited-state reactivity of the heteroleptic [FeIII(pzTp)(CN)3]- complex (pzTp = tetrakis(pyrazolyl)borate), which incorporates a σ-donating trispyrazolyl chelate ligand and three monodentate σ-donating and π-accepting cyanide ligands. Contrary to the nonemissive [Fe(CN)6]3-, a broad emission band centered at 600 nm at room temperature has been recorded for the heteroleptic analogue attributed to the radiative deactivation from a 2LMCT excited state with a luminescence quantum yield of 0.02% and a lifetime of 80 ps in chloroform at room temperature. Bimolecular reactivity of the 2LMCT excited state was successfully applied to different alcohol photo-oxidation, identifying a cyanide-H bonding as a key reaction intermediate. Finally, this research demonstrated the exciting potential of [Fe(pzTp)(CN)3]- as a photo-oxidant, paving the way for further exploration and development of emissive Fe-based photosensitizers competent for photochemical transformations.

Improved transition metal photosensitizers to drive advances in photocatalysis

To function effectively in a photocatalytic application, a photosensitizer's light absorption, excited-state lifetime, and redox potentials, both in the ground state and excited state, are critically important. The absorption profile is particularly relevant to applications involving solar harvesting, whereas the redox potentials and excited-state lifetimes determine the thermodynamics, kinetics, and quantum yields of photoinduced redox processes. This perspective article focuses on synthetic inorganic and organometallic approaches to optimize these three characteristics of transition-metal based photosensitizers. We include our own work in these areas, which has focused extensively on exceptionally strong cyclometalated iridium photoreductants that enable challenging reductive photoredox transformations on organic substrates, and more recent work which has led to improved solar harvesting in charge-transfer copper(i) chromophores, an emerging class of earth-abundant compounds particularly relevant to solar-energy applications. We also extensively highlight many other complementary strategies for optimizing these parameters and highlight representative examples from the recent literature. It remains a significant challenge to simultaneously optimize all three of these parameters at once, since improvements in one often come at the detriment of the others. These inherent trade-offs and approaches to obviate or circumvent them are discussed throughout.

Direct Determination of the Rate of Intersystem Crossing in a Near-IR Luminescent Cr(III) Triazolyl Complex

A detailed understanding of the dynamics of photoinduced processes occurring in the electronic excited state is essential in informing the rational design of photoactive transition-metal complexes. Here, the rate of intersystem crossing in a Cr(III)-centered spin-flip emitter is directly determined through the use of ultrafast broadband fluorescence upconversion spectroscopy (FLUPS). In this contribution, we combine 1,2,3-triazole-based ligands with a Cr(III) center and report the solution-stable complex [Cr(btmp)₂]³⁺ (btmp = 2,6-bis(4-phenyl-1,2,3-triazol-1-yl-methyl)pyridine) (1³⁺), which displays near-infrared (NIR) luminescence at 760 nm (τ = 13.7 μs, ϕ = 0.1%) in fluid solution. The excited-state properties of 1³⁺ are probed in detail through a combination of ultrafast transient absorption (TA) and femtosecond-to-picosecond FLUPS. Although TA spectroscopy allows us to observe the evolution of phosphorescent excited states within the doublet manifold, more significantly and for the first time for a complex of Cr(III), we utilize FLUPS to capture the short-lived fluorescence from initially populated quartet excited states immediately prior to the intersystem crossing process. The decay of fluorescence from the low-lying ⁴MC state therefore allows us to assign a value of (823 fs)^-1 to the rate of intersystem crossing. Importantly, the sensitivity of FLUPS to only luminescent states allows us to disentangle the rate of intersystem crossing from other closely associated excited-state events, something which has not been possible in the spectroscopic studies previously reported for luminescent Cr(III) systems.

The energy gap law for NIR-phosphorescent Cr(III) complexes

A series of homoleptic Cr(III) complexes containing substituted anionic 1,3-bis(pyridin-2-ylimino)isoindolin-2-ide ligands are phosphorescent with λ_max in the 777-970 nm range in degassed fluid solutions. The energy gap law has been successfully applied to the doublet excited states of Cr(III) complexes.

Shedding Light on the Oxidizing Properties of Spin-Flip Excited States in a CrIII Polypyridine Complex and Their Use in Photoredox Catalysis

The photoredox activity of well-known Ru^II complexes stems from metal-to-ligand charge transfer (MLCT) excited states, in which a ligand-based electron can initiate chemical reductions and a metal-centered hole can trigger oxidations. Cr^III polypyridines show similar photoredox properties, although they have fundamentally different electronic structures. Their photoactive excited state is of spin-flip nature, differing from the electronic ground state merely by a change of one electron spin, but with otherwise identical d-orbital occupancy. We find that the driving-force dependence for photoinduced electron transfer from 10 different donors to a spin-flip excited state of a Cr^III complex is very similar to that for a Ru^II polypyridine, and thereby validate the concept of estimating the redox potential of d³ spin-flip excited states in analogous manner as for the MLCT states of d⁶ compounds. Building on this insight, we use our Cr^III complex for photocatalytic reactions not previously explored with this compound class, including the aerobic bromination of methoxyaryls, oxygenation of 1,1,2,2-tetraphenylethylene, aerobic hydroxylation of arylboronic acids, and the vinylation of N-phenyl pyrrolidine. This work contributes to understanding the fundamental photochemical properties of first-row transition-metal complexes in comparison to well-explored precious-metal-based photocatalysts.

Complex-as-Ligand Strategy as a Tool for the Design of a Binuclear Nonsymmetrical Chromium(III) Assembly: Near-Infrared Double Emission and Intramolecular Energy Transfer

The chromium(III) polypyridyl complexes are appealing for their long-lived near-infrared (NIR) emission reaching the millisecond range and for the strong circularly polarized luminescence of their isolated enantiomers. However, harnessing those properties in functional polynuclear Cr^III devices remains mainly inaccessible because of the lack of synthetic methods for their design and functionalization. Even the preparation and investigation of most basic nonsymmetrical Cr^III dyads exhibiting directional intramolecular intermetallic energy transfer remain unexplored. Taking advantage of the inertness of heteroleptic chromium(III) polypyridyl building blocks, we herein adapt the "complex-as-ligand" strategy, largely used with precious 4d and 5d metals, for the preparation of a binuclear nonsymmetrical Cr^III complex (3d metal). The resulting [(phen)₂Cr(L)Cr(tpy)]⁶⁺ dyad shows dual long-lived NIR emission and a directional intermetallic energy transfer that is controlled by the specific arrangements of the different coordination spheres. This strategy opens a route for building predetermined polynuclear assemblies with this earth-abundant metal.

Long-lived, near-IR emission from Cr(III) under ambient conditions

Bis-terdentate (N^N^N) ligands coordinated to Cr(III) yield complexes that display near-IR emission under aerated solvent conditions at room temperature.

Heteroleptic mer-[Cr(N∩N∩N)(CN)3] complexes: synthetic challenge, structural characterization and photophysical properties

The substitution of three water molecules around trivalent chromium in CrBr₃·6H₂O with the tridentate 2,2′:6′,2′′-terpyridine (tpy), N,N′-dimethyl-N,N′-di(pyridine-2-yl)pyridine-2,6-diamine (ddpd) or 2,6-di(quinolin-8-yl)pyridine (dqp) ligands gives the heteroleptic mer-[Cr(L)Br₃] complexes. Stepwise treatments with Ag(CF₃SO₃) and KCN under microwave irradiations provide mer-[Cr(L)(CN)₃] in moderate yields. According to their X-ray crystal structures, the associated six-coordinate meridional [CrN₃C₃] chromophores increasingly deviate from a pseudo-octahedral arrangement according to L = ddpd ≈ dpq ≪ tpy; a trend in line with the replacement of six-membered with five-membered chelate rings around Cr^III. Room-temperature ligand-centered UV-excitation at 18 170 cm⁻¹ (λ_exc = 350 nm), followed by energy transfer and intersystem crossing eventually yield microsecond metal-centered Cr(²E → ⁴A₂) phosphorescence in the red to near infrared domain 13 150–12 650 cm⁻¹ (760 ≤ λ_em ≤ 790 nm). Decreasing the temperature to liquid nitrogen (77 K) extends the emission lifetimes to reach the millisecond regime with a record of 4.02 ms for mer-[Cr(dqp)(CN)₃] in frozen acetonitrile.

The heteroleptic mer-[Cr(L)(CN)₃] (L = tpy, ddpd, dqp) complexes with their C_2v-symmetrical [CrC₃N₃] luminescent chromophores represent the missing links between pseudo-octahedral [CrN₆] and [CrC₆] units found in their well-known homoleptic parents.

Phototherapeutic anticancer strategies with first-row transition metal complexes: a critical review

Photodynamic therapy (PDT) and photoactivated chemotherapy (PACT) are therapeutic techniques based on a photosensitizer (PS) and light. These techniques allow the spatial and temporal control of the activation of drugs with light. Transition metal complexes are attractive compounds as photoactivatable prodrugs since their excited states can be appropriately designed by subtle modifications of the ligands, the metal centre, or the oxidation state. However, most metal-based PSs contain heavy metals such as Ru, Os, Ir, Pt or Au, which are expensive and non-earth-abundant, contrary to first-row transition metals. In this context, the exploration of the photochemical properties of complexes based on first-row transition metals appears to be extremely promising. This did encourage several groups to develop promising PSs based on these metals. This review presents up-to-date state-of-the-art information on first-row-transition metal complexes, from titanium to zinc in regard to their application as PSs for phototherapeutic applications.

Molecular Ruby: Exploring the Excited State Landscape

The discovery of the highly NIR-luminescent Molecular Ruby [Cr(ddpd)2]3+ 13+ (ddpd = N,N’-dimethyl-N,N’-dipyridine-2-ylpyridine-2,6-diamine) has been a milestone in the development of earth-abundant luminophors and has led to important new impulses...

Luminescent First-Row Transition Metal Complexes

Precious and rare elements have traditionally dominated inorganic photophysics and photochemistry, but now we are witnessing a paradigm shift toward cheaper and more abundant metals. Even though emissive complexes based on selected first-row transition metals have long been known, recent conceptual breakthroughs revealed that a much broader range of elements in different oxidation states are useable for this purpose. Coordination compounds of V, Cr, Mn, Fe, Co, Ni, and Cu now show electronically excited states with unexpected reactivity and photoluminescence behavior. Aside from providing a compact survey of the recent conceptual key advances in this dynamic field, our Perspective identifies the main design strategies that enabled the discovery of fundamentally new types of 3d-metal-based luminophores and photosensitizers operating in solution at room temperature.

A Near-Infrared-II Emissive Chromium(III) Complex

The combination of π-donating amido with π-accepting pyridine coordination units in a tridentate chelate ligand causes a strong nephelauxetic effect in a homoleptic CrIII complex, which shifts its luminescence to the NIR-II spectral range. Previously explored CrIII polypyridine complexes typically emit between 727 and 778 nm (in the red to NIR-I spectral region), and ligand design strategies have so far concentrated on optimizing the ligand field strength. The present work takes a fundamentally different approach and focusses on increasing metal-ligand bond covalence to shift the ruby-like 2 E emission of CrIII to 1067 nm at 77 K.

Electronic Structures of Cr(III) and V(II) Polypyridyl Systems: Undertones in an Isoelectronic Analogy

A recently reported description of the photophysical properties of V²⁺ polypyridyl systems has highlighted several distinctions between isoelectronic, d³, Cr³⁺, and V²⁺ tris-homoleptic polypyridyl complexes of 2,2'-bipyridine (bpy) and 1,10-phenanthroline (phen). Here, we combine theory and experimental data to elucidate the differences in electronic structures. We provide the first crystallographic structures of the V²⁺ complexes [V(bpy)₃](BPh₄)₂ (V-1B) and [V(phen)₃](OTf)₂ (V2) and observe pronounced trigonal distortion relative to analogous Cr³⁺ complexes. We use electronic absorption spectroscopy in tandem with TD-DFT computations to assign metal-ligand charge transfer (MLCT) properties of V-1B and V2 that are unique from the intraligand transitions, ⁴(³IL), solely observed in Cr³⁺ analogues. Our newly developed natural transition spin density (NTρ^α,β) plots characterize both the Cr³⁺ and V²⁺ absorbance properties. A multideterminant approach to DFT assigns the energy of the ²E state of V-1B as stabilized through electron delocalization. We find that the profound differences in excited state lifetimes for Cr³⁺ and V²⁺ polypyridyls arise from differences in the characters of their lowest doublet states and pathways for intersystem crossing, both of which stem from trigonal structural distortion and metal-ligand π-covalency.

Replacement of the Common Chromium Source CrCl3(thf)3 with Well-Defined [CrCl2(μ-Cl)(thf)2]2

CrCl₃(thf)₃ is a common starting material in the synthesis of organometallic and coordination compounds of Cr. Deposited as an irregular solid with no possibility of recrystallization, it is not a purity guaranteed chemical, causing problems in some cases. In this work, we disclose a well-defined form of the THF adduct of CrCl₃ ([CrCl₂(μ-Cl)(thf)₂]₂), a crystalline solid, that enables structure determination by X-ray crystallography. The EA data and XRD pattern of the bulk agreed with the revealed structure. Moreover, its preparation procedure is facile: evacuation of CrCl₃·6H₂O at 100 °C, treatment with 6 equivalents of Me₃SiCl in a minimal amount of THF, and crystallization from CH₂Cl₂. The ethylene tetramerization catalyst [iPrN{P(C₆H₄-p-Si(nBu)₃)₂}₂CrCl₂]⁺[B(C₆F₅)₄]⁻ prepared using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a starting material exhibited a reliably high activity (6600 kg/g-Cr/h; 1-octene selectivity at 40 °C, 75%), while that of the one prepared using the impure CrCl₃(thf)₃ was inconsistent and relatively low (~3000 kg/g-Cr/h). By using well-defined [CrCl₂(μ-Cl)(thf)₂]₂ as a Cr source, single crystals of [(CH₃CN)₄CrCl₂]⁺[B(C₆F₅)₄]⁻ and [{Et(Cl)Al(N(iPr)₂)₂}Cr(μ-Cl)]₂ were obtained, allowing structure determination by X-ray crystallography, which had been unsuccessful when the previously known CrCl₃(thf)₃ was used as the Cr source.