Devitrite (Na2Ca3Si6O16) phase dominated nanostructured 45S5 bioactive glass: exploring its structural and biological properties

This research study is primarily centred around calcination temperature and time influence on phase formation in bioactive glasses (BGs). In the present study, BG with a nominal composition of 45S5 was synthesized through the sol-gel process. The developed BGs then underwent heat treatment for various sintering durations and temperatures. X-ray diffraction (XRD) patterns of the BGs reveals that the sintering process led to the crystallization of both devitrite (Na2Ca3Si6O16) and combeite (Na2Ca2Si3O9) phases. The field emission scanning electron microscopy study divulges morphological alterations, from sheet-like to rod-like structures to eventually transforming into spherical and sheet-like structures. The surface area and Type-IV mesoporous porosity were validated through Brunauer Emmett Teller analysis, highlighting a notable increase in pore volume and mechanical strength at a lower sintering temperature.In vitroapatite formation was carried out in Hank's balance salt in order to evaluate the bioactivity of the glass. After 7 d of immersion in simulated body fluid (SBF), XRD patterns and scanning electron microscopy micrographs results showed that formation of hydroxyapatite layer on the surface of the BGs. The BG compatibility with erythrocytes (red blood cells) was also studied, and the results revealed that there was only a low 2% lysis, showing good hemocompatibility. The drug loading and release behaviour of the BGs was studied in thein vitroanalysis. The findings showed a high drug encapsulation effectiveness of up to 90% and continuous drug release from the BGs for 24 h. The materials biocompatibility was unambiguously confirmed by cytocompatibility and proliferation studies. This study provides compelling evidence for the exceptional efficacy and promise of the distinct 45S5 BGs in advancing the field of regenerative medicine.

Rapidly derived equimolar Ca: P phasic bioactive glass infused flexible gelatin multi-functional scaffolds - A promising tissue engineering

The study aims to design and fabricate an ultra-easier multi-functional biomedical polymeric scaffold loaded with unique equimolar Ca:P phasic bioactive glass material (BG). Gelatin (G) - 45S5 bioactive glass (BG) scaffolds were synthesized via a simple laboratory refrigerator with higher biocompatibility and cytocompatibility. The results proved that BG has enhanced bio-mineralization of the scaffolds and results support that the G: BG (1:2) ratio is the more appropriate composition. Brunauer-Emmett-Teller (BET) study confirms the higher surface area for pure Gelatin and G: BG (1:2). Scanning Electron Microscopic images display the precipitation of hydroxycarbonate apatite layer over the scaffolds on immersing it in simulated body fluid. Alkaline phosphate activity proved that G: BG (1:2) scaffold could induce mitogenesis in MG-63 osteoblast cells, thus helping in hard tissue regeneration. Sirius red collagen deposition showed that higher content bioactive glass incorporated Gelatin polymeric scaffold G: BG (1:2) could induce rapid collagen secretion of NIH 3T3 fibroblast cell line that could help in soft tissue regeneration and earlier wound healing. The scaffolds were also tested for cell viability using NIH 3T3 fibroblast cell lines and MG 63 osteoblastic cell lines through methyl thiazolyl tetrazolium (MTT) assay. Thus, the study shows a scaffold of appropriate composition G: BG (1:2) can be a multifunctional material to regenerate hard and soft tissues.

Modification of titanium orthopedic implants with bioactive glass: a systematic review of in vivo and in vitro studies

Bioactive glasses (BGs) are ideal biomaterials in the field of bio-restoration due to their excellent biocompatibility. Titanium alloys are widely used as a bone graft substitute material because of their excellent corrosion resistance and mechanical properties; however, their biological inertness makes them prone to clinical failure. Surface modification of titanium alloys with bioactive glass can effectively combine the superior mechanical properties of the substrate with the biological properties of the coating material. In this review, the relevant articles published from 2013 to the present were searched in four databases, namely, Web of Science, PubMed, Embase, and Scopus, and after screening, 49 studies were included. We systematically reviewed the basic information and the study types of the included studies, which comprise in vitro experiments, animal tests, and clinical trials. In addition, we summarized the applied coating technologies, which include pulsed laser deposition (PLD), electrophoretic deposition, dip coating, and magnetron sputtering deposition. The superior biocompatibility of the materials in terms of cytotoxicity, cell activity, hemocompatibility, anti-inflammatory properties, bioactivity, and their good bioactivity in terms of osseointegration, osteogenesis, angiogenesis, and soft tissue adhesion are discussed. We also analyzed the advantages of the existing materials and the prospects for further research. Even though the current research status is not extensive enough, it is still believed that BG-coated Ti implants have great clinical application prospects.

Bioactive Glass—An Extensive Study of the Preparation and Coating Methods

Diseases or complications that are caused by bone tissue damage affect millions of patients every year. Orthopedic and dental implants have become important treatment options for replacing and repairing missing or damaged parts of bones and teeth. In order to use a material in the manufacture of implants, the material must meet several requirements, such as mechanical stability, elasticity, biocompatibility, hydrophilicity, corrosion resistance, and non-toxicity. In the 1970s, a biocompatible glassy material called bioactive glass was discovered. At a later time, several glass materials with similar properties were developed. This material has a big potential to be used in formulating medical devices, but its fragility is an important disadvantage. The use of bioactive glasses in the form of coatings on metal substrates allows the combination of the mechanical hardness of the metal and the biocompatibility of the bioactive glass. In this review, an extensive study of the literature was conducted regarding the preparation methods of bioactive glass and the different techniques of coating on various substrates, such as stainless steel, titanium, and their alloys. Furthermore, the main doping agents that can be used to impart special properties to the bioactive glass coatings are described.

Pulsed laser deposition of nanostructured bioactive glass and hydroxyapatite coatings: Microstructural and electrochemical characterization

Bioactive coatings on metallic implants promote osseointegration between bone and implant interfaces. A suitable coating enhances the life span of the implant and reduces the requirement of revision surgery. The coating process needs to be optimized such that it does not alter the bioactivity of the material. To understand this, the biocompatibility of nanostructured bioactive glass and hydroxyapatite-coated Titanium substrate by pulsed laser deposition method is evaluated. Raman and IR spectroscopic techniques based on silica and phosphate functional groups mapping have confirmed homogeneity in coatings by pulse laser deposition method. Comparative studies on nanostructured bioactive glass and hydroxyapatite on titanium surface elaborated the significance of bioactivity, hemocompatibility, and cytocompatibility of the coated surface. Notably, both hydroxyapatite and bioactive glass show good hemocompatibility in powder form. Hemocompatibility and cytocompatibility results validate the enhanced sustenance for hydroxyapatite coating. These results signify the importance of the choice of coating methodology of bioceramics towards implant applications.