Green and Facile Synthesis of Porous SiO2@C Adsorbents from Rice Husk: Preparation, Characterization, and Their Application in Removal of Reactive Red 120 in Aqueous Solution

In this work, a green, novel, fast, and facile approach for synthesizing a SiO2/C nanocomposite series from rice husk (RH) through quenching and grinding techniques has been reported along with its application for the adsorptive removal of Reactive Red 120 (RR120) dye from an aqueous solution. The effect of carbonization temperature on the textural and interfacial features of RH was confirmed by scanning electron microscopy (SEM), while the structure and elemental composition of the as-synthesized RH were investigated via XRD, Brunauer-Emmett-Teller (BET), FT-IR, Raman, and X-ray photoelectron spectroscopy (XPS). The RH had a high surface area (521.35 m2 g-1), large micropores, mesopores, and total pore volumes of 0.5059, 3.9931, and 5.2196 cm3 g-1, while SiO2 and C were the two major components. In the batch adsorption test, the effects of pH, contact time, adsorbent mass, temperature, and initial RR120 concentration were investigated. The maximum adsorption capacity was fitted by Langmuir, Freundlich, Temkin, Dubinin-Radushkevich (D-R), Hasley, Harkins-Jura, and BET isotherm models, and Langmuir was the best-fitted model. In addition, the pseudo-first-order, pseudo-second-order, intraparticle diffusion, and Elovich chemisorption models were used to explain the adsorption kinetics. Additionally, the values of Gibbs free energy, enthalpy, and entropy thermodynamics suggested that the RR120 adsorption phenomenon by RH8-3 was endothermic and spontaneous. The adsorption process was controlled by a physical mechanism, and the maximum adsorption capacity was found to be 151.52 mg g-1 at pH 2, with a contact time of 90 min, adsorbent amount of 0.03 g, and temperature of 313 K. The adopted technique may open up a new alternative route for the mass utilization of RH for the removal of dyes in water and wastewater and also for various practical applications.

N, S dual doped mesoporous carbon assisted simultaneous electrochemical assay of emerging water contaminant hydroquinone and catechol

Heteroatom doped mesoporous carbon materials are promising catalysts for the electrochemical sensing application. Herein, we report highly efficient dual heteroatom-doped hexagonal mesoporous carbon (MC) derived from Santa Barbara Amorphous-15 (SBA-15) hard template for the detection of phenolic isomers. The synthesis involves dopamine hydrochloride (DA)/thiophene complex, which helps to attain perfectly retained N and S dual doped mesoporous carbon (NS-MC) framework. NS-MC exhibits higher surface area (951 m² g^-1) as well as higher pore volume (0.12 cm³ g^-1) with huge graphitic, pyridinic and thiophenic defective sites which facilitates the well-resolved simultaneous electrochemical detection of phenolic isomers hydroquinone (HQ) and catechol (CC). Our results demonstrate that as-synthesized NS-MC material had a LOD of 0.63 μM and 0.29 μM for HQ and CC, respectively. From the calibration curve, sensitivities of proposed sensor were found to be 9.44, 2.71 μA μM^-1 cm^-2 and 20.80, 10.02 μA μM^-1 cm^-2 for HQ and CC, respectively with good linear ranges of 10-45 μM and 45-115 μM for HQ; 2-16 μM and 16-40 μM for CC. The NS-MC modified electrode exhibited good selectivity over various possible interferences. The present investigation reveals that the proposed NS-MC material is a promising metal-free catalyst which boosted to electrochemically detect both HQ and CC, present in the municipal tap as well as natural river stream water samples.

Effect of graphite oxide and exfoliated graphite oxide as a modifier for the voltametric determination of dopamine in presence of uric acid and folic acid

In the present work, exfoliated graphite oxide (E-GO) was prepared by sonicating graphite oxide (GO) (prepared by modified Hummer's and Offemam methods). Prepared GO and E-GO were characterized using infrared absorption spectroscopy, X-ray diffraction, and scanning electron microscopy. The electrocatalytic properties of GO and E-GO towards detection of dopamine (DA), uric acid (UA), and folic acid (FA) were investigated using cyclic voltammetry and differential pulse voltammetry. Our results revealed that E-GO has a slighter advantage over the GO as an electrode modifier for detection DA, UA, and FA, which might be ascribed to the good conductivity of E-GO when compared to the GO.

Ferrocene-reduced graphene oxide-polyoxometalates based ternary nanocomposites as electrochemical detection for acetaminophen

Developing a convenient and accurate method for the determination of acetaminophen (APAP) content is very vital, and ferrocene (Fc) based nanocomposites coupled with polyoxometalates (POMs) as electrochemical sensor is a promising approach to address the issues. Herein, a new ternary nanocomposite of Fc based carbon nanomaterials (Fc-rGO) with PMo₁₂ (Fc-rGO/PMo₁₂, rGFP-n) was successfully fabricated, and the electrochemical activities and APAP detection of rGFP-n as electro-active materials were systematically investigated, and results of the differential pulse voltammetry (DPV) and electro-active surface area (0.0332 cm²) show that rGFP-1 is an excellent electrochemical sensor for APAP, and the proportion of Fc in rGFP-n can affect the charge transfer between APAP and rGFP. Under the optimal experimental conditions, rGFP-1 can be used to detect APAP with the limit of detection (LOD) of 13.27 nM (S/N = 3), the sensitivity of 36.81μA⋅μM^-1cm^-2, and the detection range from 1×10^-6 to 1×10^-3M, meeting the lowest plasma concentration of APAP (1.3 mM).