Highly selective and sensitive fluorescent zeolitic imidazole frameworks sensor for nitroaromatic explosive detection

CsPbBr3 perovskite quantum dot decorated ZIF-8 MOF: a selective dual recognition fluorometric visual probe for 4-nitroaniline and rhodamine blue

The uses of highly luminescent perovskite quantum dots in real analytical detection were limited by their supersensitive nature. Here, we have designed a CsPbBr3 perovskite based fluorometric sensor by integrating them with a zeolitic imidazole framework (ZIF-8) via an in situ one step technique and established its stability in aqueous and other polar solvents. The CsPbBr3@ZIF-8 luminescence sensor functioned excellently for the trace detection of 4-nitroaniline and rhodamine blue dye molecules with a detection limit value of 8.367 ppb and 0.088 ppm, respectively. A comprehensive investigation found that the quenching of the fluorescence signal occurred via fluorescence resonance energy transfer (FRET) for rhodamine blue dye and a H-bonding interaction induced trap density mediated quenching mechanism was responsible for 4-NA detection. The potential of this suggested sensor as a cheap portable test paper probe for analyte detection was also explored. This study introduces CsPbBr3 as a cutting-edge sensing platform for industrial pollutants such as dye molecules and nitroaromatics.

Turn-off luminescence sensing, white light emission and magnetic studies of two-dimensional lanthanide MOFs

The lanthanide metal organic framework compounds [Ln(BPTA)1.5(Bpy)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1a-5a) and [Ln(BPTA)1.5(Phen)]·0.5DMF (Ln = Y, Eu, Gd, Tb, Dy; 1b-5b) were prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as the primary ligand and 2,2'-bipyridine (1a-5a) and 1,10-phenanthroline (1b-5b) as the secondary ligands. Single-crystal structural studies on [Gd(BPTA)1.5(Bpy)]·0.5DMF (3a) and [Dy(BPTA)1.5(Phen)]·0.5DMF (5b) indicated that the compounds have a two-dimensional structure. The Y compound exhibits blue emission, and the other compounds exhibit emission in the expected regions (λex = 350 nm). White light emission was achieved by careful mixing of the red (Eu3+) and green (Tb3+) components in the blue emitting Y compound. Thus, Y0.96Tb0.02Eu0.02 (bpy) and Y0.939Tb0.06Eu0.001 (phen) were found to show white emission when excited using a wavelength of 350 nm. The introduction of N-N-containing ancillary ligands (i.e., bpy and phen) increased the overall quantum yield (QY) of white light emission to 31% and 43%, respectively. The high QY observed for the Tb and Eu compounds was found to be sensitive and selective for the fluorometric detection of azinphos-methyl pesticide and trinitrophenol (TNP) in an aqueous medium at the ppb level. The same behaviour was observed when utilising the compounds as onsite paper strip sensors. Their magnetic properties were also studied, revealing for the Tb and Dy derivatives slow relaxation of the magnetisation at low temperature. The present study highlights the usefulness of rigid π-conjugated molecules such as 2,2'-bipyridine and 1,10-phenanthroline in enhancing the many utilities of rare-earth-containing MOFs towards white light emission, the sensing of harmful and dangerous substances and magnetic properties.

Analytical Tools and Methods for Explosive Analysis in Forensics: A Critical Review

This review summarizes (i) compositions and types of improvised explosive devices; (ii) the process of collection, extraction and analysis of explosive evidence encountered in explosive and related cases; (iii) inter-comparison of analytical techniques; (iv) the challenges and prospects of explosive detection technology. The highlights of this study include extensive information regarding the National & International standards specified by USEPA, ASTM, and so on, for explosives detection. The holistic development of analytical tools for explosive analysis ranging from conventional methods to advanced analytical tools is also covered in this article. The most important aspect of this review is to make forensic scientists familiar with the challenges during explosive analysis and the steps to avoid them. The problems during analysis can be analyte-based, that is, interferences due to matrix or added molding/stabilizing agents, trace amount of parent explosives in post-blast samples and many more. Others are techniques-based challenges viz. specificity, selectivity, and sensitivity of the technique. Thus, it has become a primary concern to adopt rapid, field deployable, and highly sensitive techniques.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

In Situ Oxidation of Pyridyl-Dihydrobenzoimidazoquinazoline and the Synthesis of a Highly Luminescent Cd(II) Coordination Polymer: A Promising Candidate for Mutagenic Nitroaromatic Detection and Device Fabrication

Pyridyl-substituted imidazoquinoline, a potent fluorescent framework, is advantageous to architect multifunctional coordination networks for sensing and fabricating emergent electrical conductors. In this work, a Cd(II)-based one-dimensional (1D) coordination polymer (1D CP), [Cd(glu)2(pbiq)2(H2O)]n (1), [H2glu = glutaric acid and pbiq = 4-(6-(pyridin-4-yl)benzo[4,5]imidazo[1,2-c]quinazoline)], has been structurally confirmed by single-crystal X-ray crystallography. The H-bonding and π···π interactions built a three-dimensional (3D) supramolecular structure that strongly emits at 416 nm in acetonitrile suspension. Potentially intrusive nitroaromatics (NAs) and trinitrophenol (TNP) selectively quench the strong emission of 1, and the highest quenching is noted in the case of TNP. A detection limit (limit of detection (LOD)) of 1.51 × 10-7 M for TNP is determined. The band gap (3.31 eV) of 1 recognizes semiconducting behavior, and an electronic device is fabricated. The correlation of current vs voltage (I-V plot) reveals a substantial non-ohmic electrical conductivity of 1 (Λ: 1.10 × 10-5 S m-1) along with a low energy barrier (ΦB: 0.69), and the series resistance (Rs) becomes 6.21 kΩ.

A fluorescent covalent organic framework for visual detection of p-benzoquinone

P-benzoquinone (PBQ) is toxic and harmful for health. The development of portable sensor to realize the detection of PBQ is of great significance. Herein, a novel covalent organic framework (COF_ML-TFPB) with intramolecular charge transfer and aggregation induced emission properties was proposed via condensation reaction of melem (ML) and 1,3,5-tris (4-formylphenyl) benzene (TFPB). COF_ML-TFPB shows strong fluorescence in both solution and solid state and can be used for the fluorescence detection of PBQ. Due to the internal filtration effect and photoinduced electron transfer effect, PBQ can quench the fluorescence of COF_ML-TFPB. The developed COF_ML-TFPB fluorescent sensor displayed a wide linear range for PBQ from 0.138 ng mL^-1 - 35 μg mL^-1, and the detection limit was 0.046 ng mL^-1. In addition, fluorescent test paper for rapid and portable detection of PBQ was also developed by depositing COF_ML-TFPB on filter paper directly. It reduces the cost and time of detection and realizes the semiquantitative detection of PBQ. Moreover, the fluorescence color was converted into digital RGB value to calculate the concentration of PBQ accurately by a smartphone. This method realizes the portable qualitative and semiquantitative determination of PBQ.

Relative capability demonstration of luminescent Al-MOFs for ideal detection of nitroaromatic explosives

Here, we have synthesised three luminescent Al MOFs i.e., Al-NTP, Al-FDA, and Al-TDA, using common metal ions (AlCl₃·6H₂O) with different carboxylic acid organic linkers (5-nitroisophthalic acid, 2,5-furan dicarboxylic acid, and 2,5-thiophenedicarboxylic acid) in a semi-aqueous medium. The structural analysis of Al-MOFs has been confirmed through powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy and absorption spectroscopy. Afterward, the optical properties of all three Al-MOFs were confirmed using photoluminescence spectroscopy and demonstrated for the detection of nitroaromatic explosives. We have observed host-guest interaction through a quenching mechanism. Among the three synthesised Al-MOFs, Al-NTP MOF exhibit 0.014 ppm lowest limit of detection in chloroform at room temperature. Our comparative study results reveal that the selection of the organic linker and solvent plays a critical role in MOF based sensing applications.

Optical gas sensor based on the combination of a QD photoluminescent probe and a QD photodetector

We report on a sensor architecture for detection of hazardous gases. The proposed device is based on the integration of a solid-state quantum dot (QD) photoluminescent probe with a QD photodetector on the same substrate. The effectiveness of the approach is demonstrated by developing a compact optical sensor for trace detection of explosives in air. The proposed architecture is very simple and consists of a silicon substrate with both surfaces coated with QD films. The upper layer acts as photoluminescent probe, pumped by a blue LED. The change of photoluminescence intensity associated to the interaction between the QDs and the target analyte is measured by the QD photodetector fabricated on the opposite side of the substrate. The sensor is mounted into a small chamber provided with the LED and the front-end electronics. The device is characterized by using nitrobenzene as representative nitroaromatic compound. Extremely low concentrations (down to 0.1 ppm) can be detected by the proposed device, with a theoretical detection limit estimated to be as low as 2 ppb. Results are repeatable and no ageing effect is observed over a 70 d period. The proposed architecture may provide a promising solution for explosive detection in air as well as other sensing applications, thanks to its sensitivity, simple fabrication process, practical usability and cost effectiveness.

Novel Electrochemical Sensing of Catechins in Raw Green Tea Extract via a Trimetallic Zeolitic Imidazolate Fibrous Framework

Human health-related issues are increasing in day to day life because of the modern and unhygienic food lifestyles. In recent times, green tea (GT) gains more attention due to its numerous health benefits. It contains more biologically active compounds that improve mental health, increase metabolism, reduce cancer risks, and serve as an anti-aging agent for the brain. As it is globally consumed, the evaluation of the compounds present in it is very important. Hence, an attempt has been performed to evaluate these components in GT by using a cobalt nickel iron-based trimetallic zeolitic imidazolate framework as microfibers (CoNiFe-ZIF-MFs) synthesized via an electrospinning technique. Interestingly, the synthesized CoNiFe-ZIF-MFs catalyst simultaneously detects three major catechin (CT) groups, namely, epigallocatechin-3-gallate (EGCG), epicatechin (EC), and epicatechingallate (ECG). Further, the square wave voltammetry findings showed that there is a wide linear range of 50 ng to 1 mg for all the three CTs with LODs 45, 8, and 4 ng for EGCG, EC, and ECG, respectively. These results confirm the excellent sensing behavior of the composite toward GT extracts, proposing its practical utility in real-time compound analysis in food sectors. Other results like stability and reproducibility also promote its usage in the biomedical field. This study mainly focuses on the direct sensing of CTs present in GT without spiking any commercially purchased sample, and the sensing was performed simultaneously for all the three analytes; thus, this work gains novelty from the existing ones.

Tuning luminescence of the fluorescent molecule 2-(2-hydroxyphenyl)-1H-benzimidazole via zeolitic imidazolate framework-8

Zeolitic imidazolate framework-8 (ZIF-8) is one of the most promising metal-organic frameworks because of its excellent high porosity, stability and geometrically well-defined structure. However, the application of ZIF-8 in the field of fluorescent molecular sensing has not been intensively explored. Our work demonstrates the versatility of ZIF-8 as a carrier material, which can be used for small molecule [2-(2-hydroxyphenyl)-1H-benzimidazole (HPBI)] capture and fluorescence enhancement. ZIF-8 displays luminescent behavior changes when combined with HPBI, as the emission peaks of ZIF-8 and HPBI are located in the same range for resonance enhancement of fluorescence. The results of the experiment indicate that the fluorescence enhancement effect will change in the presence of different concentrations of HPBI. We propose that the pore structure of ZIF-8 could provide an opportunity for the adsorption of HPBI molecules, and eventually the adsorption would saturate. The high porosity of ZIF-8 provides the path to HPBI aggregation or entrance into the ZIF-8 internal structure. Our results suggest that ZIF-8 may offer great promise for molecular fluorescence sensing.

Designing bimetallic zeolitic imidazolate frameworks (ZIFs) for aqueous catalysis: Co/Zn-ZIF-8 as a cyclic-durable catalyst for hydrogen peroxide oxidative decomposition of organic dyes in water

ZIF-8 is well known hybrid material that is self-assembled from inorganic and organic moieties. It has several potential applications due to its unique structure. One of these potential applications is in advanced oxidation processes (AOP) via a heterogeneous catalysis system. The use of modified ZIF-8/H2O2 for the destruction of the azo dye methyl orange (MO) is presented in this work to explore its efficacy. This work presents the bimetallic Co/Zn-ZIF-8 as an efficient catalyst to promote H2O2 oxidation of the MO dye. Co/Zn-ZIF-8 was synthesized through a hydrothermal process, and the pristine structure was confirmed using XRD, FTIR, and XPS. The Co/Zn-ZIF-8/H2O2 system successfully decolorized MO at the selected pH 6.5. It was found that more than 90% of MO (10 ppm) was degraded within only about 50 minutes. Proposed radical and redox mechanisms are presented for H2O2 decomposition where the redox mechanism is suggested to predominate via a Co(ii)/Co(iii) redox consecutive cyclic process.

Machine learning-assisted array from fluorescent conjugated microporous polymers for multiple explosives recognition

The fluorescent properties of conjugated microporous polyphenylene (CMPs) were tuned through a wide range by inclusion of small amount of comonomer as chromophore in the network. The multi-color CMPs were used for explosives sensing and demonstrated broad sensitivity (ranging from -0.01888 μM^-1 to -0.00467 μM^-1) and LODs (ranging from 31.0 nM to 125.3 nM) against thirteen explosive compounds including nitroaromatics (NACs), nitramines (NAMs) and nitrogen-rich heterocycles (NRHCs). The CMPs were also developed as a sensor array for discrimination of thirteen explosives, specifically including NT, p-DNB, DNT, TNT, TNP, TNR, RDX, HMX, CL-20, FOX-7, NTO, DABT and DHT. By using classical statistical method "Linear Discriminant Analysis (LDA)", the thirteen explosives at a fixed concentration were completely discriminated and unknown test samples were indentied with 88% classification accuracy. Moreover, explosives in different concentrations and the mixtures of explosives were also successfully classified. Compared with LDA, Machine Learning algorithms have significant advantages in analyzing the array-based sensing data. Different Machine Learning models for pattern recognition have also been implemented and discussed here and much higher accuracy (96% for "neural network") can be achieved in predicting unknown test samples after training.

One-pot synthesis of poly(vinylpyrrolidone)-encapsulated color-emitting silicon quantum dots for sensitive and selective detection of 2,4,6-trinitrophenol

Here, we illustrate an efficient, convenient, and simple method for the sensitive and selective detection of nitro explosive 2,4,6-trinitrophenol (TNP) in 100% water medium by bright cyan-blue color emitting colloidal...

Dye-functionalized metal-organic frameworks with the uniform dispersion of MnO2 nanosheets for visualized fluorescence detection of alanine aminotransferase

The wide applications of metal-organic framework (MOF) luminescent materials in the field of optics have attracted the general attention of researchers. Therefore, the development of simple and multifunctional MOF light-emitting platforms have become a research hotspot. The composites (MnO2@ZIF-8-luminol) were prepared by an in situ synthesis method and room-temperature covalent reaction. The composites and o-phenylenediamine (OPD) constitute a dual emission sensor for detecting alanine aminotransferase (ALT). OPD can be oxidized by MnO₂ to 2,3-diaminophenazine (DAP) with yellow fluorescence emission, which inhibits the blue emission of luminol through fluorescence resonance energy transfer (FRET). The presence of tiopronin (TP) will destroy the FRET process, extinguishing the yellow fluorescence emission and restoring the blue fluorescence emission. The special effect between ALT and TP will further reverse the changes in the two fluorescent signals. Moreover, in the detection process, when the blue and yellow fluorescence energies in the system are within a certain range, a new white light emission will be generated, which causes the sensing of ALT to present ternary visualization. In addition, a high-security anti-counterfeiting platform is constructed by using the prepared materials and agarose hydrogels. The anti-counterfeiting platform can encrypt information on demand according to the luminous characteristics of different materials. This study not only provides a typical case of ternary visualization sensing by MOF-based materials but also develops a possible method for the construction of a MOF-based hydrogel anti-counterfeiting platform.

Self-Assembly Hydrosoluble Coronenes: A Rich Source of Supramolecular Turn-On Fluorogenic Sensing Materials in Aqueous Media

Water-soluble coronenes, that form nanoparticles by self-association, work as new fluorescent materials by complexation with cucurbit[7]uril, as well as selective turn-on fluorogenic sensors for nitroaromatic explosives with remarkable selectivity, by using only water as solvent.

Rapid optical sensor for recognition of explosive 2,4,6-TNP traces in water through fluorescent ZnSe quantum dots

In this report, blue fluorescent zinc selenide quantum dots (ZnSe QDs) were synthesized using 3-mercaptopropionic acid through a direct aqueous route at a lower temperature of 70 °C. The photoluminescence (PL) characteristics of ZnSe QDs have been employed to recognize nitroaromatic compounds, i.e., traces of 2,4,6-TNP (picric acid) in water. The sensing of nitroaromatic compounds was performed via fluorescence techniques. The PL band of ZnSe QDs observed at 490 nm is selectively quenched with an increasing concentration of picric acid in DI water and river water. For the proposed sensing probe, the Stern-Volmer (S-V) plot shows linearity over the range of 2.0 µM-0.25 mM with the detection limit of 12.4 × 10^-6 M without any interference effect of other nitroaromatic compounds. The plausible mechanism of PL quenching is considered as the inner filter effect, based on absorption, PL and PL lifetimes.

An enhanced fluorescence detection of a nitroaromatic compound using bacteria embedded in porous poly lactic-co-glycolic acid microbeads

The detection of explosive nitroaromatic compounds has caused worldwide concern for human safety. In this study, we introduce a fluorescent biosensor based on porous biocompatible microspheres loaded with a bioreporter for the detection of nitroaromatic compounds. Poly(lactic-co-glycolic acid) microbeads were designed as biosensors embedded with the bacterial bioreporters. The genetically engineered bacterial bioreporter can express a green fluorescent protein in response to nitroaromatic compounds (e.g., trinitrotoluene and dinitrotoluene). The modified surface structure in microbeads provides a large surface area, as well as easy penetration, and increases the number of attached bioreporters for enhanced fluorescent signals of biosensors. Moreover, the addition of the M13 bacteriophage in open porous microbeads significantly amplified the fluorescence signal for detection by the π-π interaction between peptides in the M13 bacteriophage and nitroaromatic compounds. The modification of the surface morphology, as well as the genetically engineered M13 phage, significantly amplifies the fluorescence signal, which makes the detection of explosives easier, and has great potential for the stand-off remote sensing of TNT buried in the field.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Facile and rapid synthesis of functionalized Zr-BTC for the optical detection of the blistering agent simulant 2-chloroethyl ethyl sulfide (CEES)

2-Chloroethyl ethyl sulfide (CEES) is a simulant for the chemical warfare agent, bis(2-chloroethyl) sulfide, also known as mustard gas. Here, we demonstrate a facile and rapid method to synthesize a functionalized metal-organic framework (MOF) material for the detection of CEES at trace level. During the synthesis of Zr-BTC, the in situ encapsulation of a fluorescent material (fluorescein) into Zr-BTC voids is performed by a simple solvothermal reaction. The produced F@Zr-BTC is used as a fluorescent probe for CEES detection. The synthesized material shows fluorescence quenching under illumination at an excitation wavelength of 470 nm when F@Zr-BTC is exposed to CEES. This sensing material shows the highest fluorescence quenching at an emission wavelength of 534 nm with a CEES concentration as low as 50 ppb. Therefore, the demonstrated sensing method with F@Zr-BTC is a fast and convenient protocol for the selective and sensitive detection of CEES in practical applications.

Novel voltammetric tumor necrosis factor-alpha (TNF-α) immunosensor based on gold nanoparticles involved in thiol-functionalized multi-walled carbon nanotubes and bimetallic Ni/Cu-MOFs

TNF-α, as a pro-inflammatory cytokine, regulates some physiological and pathological courses. TNF-α level increases in some important diseases such as cancer, arthritis, and diabetes. In addition, it displays an important function in Alzheimer's and cardiovascular diseases. Herein, a novel, sensitive, and selective voltammetric TNF-α immunosensor was prepared by using gold nanoparticles involved in thiol-functionalized multi-walled carbon nanotubes (AuNPs/S-MWCNTs) as sensor platform and bimetallic Ni/Cu-MOFs as sensor amplification. Firstly, the sensor platform was developed on glassy carbon electrode (GCE) surface by using mixture of thiol-functionalized MWCNTs (S-MWCNTs) and AuNPs. Then, capture TNF-α antibodies were conjugated to sensor platform by amino-gold affinity. After capture TNF-α antibodies' immobilization, a new-type voltammetric TNF-α immunosensor was developed by immune reaction between AuNPs/S-MWCNTs immobilized with primer TNF-α antibodies and bimetallic Ni/Cu-MOFs conjugated with seconder TNF-α antibodies. The prepared TNF-α immunosensor was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD) method, x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), thermogravimetric analysis, Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). A linearity range of 0.01-1.0 pg mL^-1 and a low detection limit of 2.00 fg mL^-1 were also obtained for analytical applications.

Raman spectroscopy-based sensitive, fast and reversible vapour phase detection of explosives adsorbed on metal–organic frameworks UiO-67

A sensitive, selective, rapid, and reversible detection of explosive molecules in the vapour phase, adsorbed on metal–organic frameworks (MOFs) under ambient laboratory conditions is demonstrated using Raman spectroscopy.

A luminescent metal–organic framework with tetragonal nanochannels as an efficient chemosensor for nitroaromatic explosives detection

A 3D MOF with nanosized channels can act as an effective fluorescence probe, showing obvious fluorescence “turn-off” for nitroaromatic explosives.

Highly fluorescent scandium-tetracarboxylate frameworks: selective detection of nitro-aromatic compounds, sensing mechanism, and their application

Recently, exploring new luminescent metal-organic frameworks (LMOFs) to selectively detect nitro-aromatic compounds (NACs) has been a hot topic of research. Simultaneously, it is still a challenging issue to understand the sensing mechanism of luminescent MOFs interacting with NACs at the molecular level. In this work, highly fluorescent Sc-tetracarboxylate frameworks (Sc-EBTC) have been successfully synthesized through a solvothermal method. The as-prepared Sc-EBTC crystals have good thermal stability, chemical stability as well as strong fluorescence (λ_ex = 320 nm and λ_em = 400 nm), and they can detect various NACs rapidly (as short as 30 s), selectively and efficiently by the "turn-off" fluorescence mechanism. The detection limits of Sc-EBTC toward 2,4-DNP and 4-NP are quantified to be 5.71 ppb and 6.26 ppb, respectively. Furthermore, to better understand the sensing mechanism, we attempt to use solid-state NMR and X-ray photoelectron spectroscopy to vividly characterize the charge transfer caused by the interaction between NAC molecules and the MOF at the molecular level. Additionally, test strips were made successfully for the practical detection of the NACs. This study demonstrates that the MOF constructed from the H₄EBTC ligands might be a promising candidate for the detection of trace NACs.