Challenges and strategies relating to device function layers and their integration toward high-performance inorganic perovskite solar cells

Glass-Blowing-Inspired Upcycling of Thermosetting Polymer to Neuron-Like Hierarchical Carbon for Microwave Absorption and Conversion

Upgrading thermosetting polymer waste and harvesting unwanted electromagnetic energy are of great significance in solving environmental pollution and energy shortage problems. Herein, inspired by the glass-blowing art, a spontaneous, controllable, and scalable strategy is proposed to prepare hollow carbon materials by inner blowing and outside blocking. Specifically, hierarchically neuron-like hollow carbon materials (HCMSs) with various sizes are fabricated from melamine-formaldehyde sponge (MS) waste. Benefiting from the synergistic of the hollow "cell body" and the connected "protrusions" networks, HCMSs reveal superior electromagnetic absorption performance with a strong reflection loss of -54.9 dB, electromagnetic-heat conversion ability with a high conversion efficiency of 34.4%, and efficient energy storage performance in supercapacitor. Furthermore, a multifunctional device integrating electromagnetic-heat-electrical energy conversion is designed, and its feasibility is proved by experiments and theoretical calculations. The integrated device reveals an output voltage of 34.5 mV and a maximum output power of 0.89 µW with electromagnetic radiation for 60 s. This work provides a novel solution to recycle polymer waste, electromagnetic energy, and unwanted thermal energy.

CeO2 for modulating the electronic structure of nickel-cobalt bimetallic phosphides to promote efficient overall water splitting

The discovery of earth-abundant electrocatalysts to replace platinum and iridium for overall water splitting is a crucial step in reducing the cost of green hydrogen production. Transition metal phosphides have drawn wide attention due to their non-toxicity, good chemical stability, low cost, and stable catalytic activity in alkaline electrolytes. We report a three-dimensional flower-like structure composed of core-shell nanoneedles as catalysts, in which CeO2 is introduced on the surface of nickel cobalt bimetallic phosphide through electrodeposition. And X-ray photoelectron spectroscopy testing and DFT calculations show electron coupling and transfer between CeO2 and CoP3, thereby modulating the electronic structure of the catalyst surface and reducing the adsorption energy of H atoms during the catalytic process, resulting in enhanced catalytic activity. In 1 M KOH, it exhibits a low overpotential of 109 and 296 mV to achieve the current density of 50 mA cm-2 for HER and OER, respectively. When used as both cathode and anode as a bifunctional catalyst, a voltage of only 1.77 V is required to achieve a current density of 50 mA cm-2, demonstrating great industrial potential.

Ionic Liquid Bridge Assisting Bifacial Defect Passivation for Efficient All-Inorganic Perovskite Cells with High Open-Circuit Voltage

Serious open-circuit voltage (Voc) loss originating from nonradiative recombination and mismatch energy level at TiO2/perovskite buried interface dramatically limits the photovoltaic performance of all-inorganic CsPbIxBr3-x (x = 1, 2) perovskite solar cells (PSCs) fabricated through low-temperature methods. Here, an ionic liquid (IL) bridge is constructed by introducing 1-butyl-3-methylimidazolium acetate (BMIMAc) IL to treat the TiO2/perovskite buried interface, bilaterally passivate defects and modulate energy alignment. Therefore, the Voc of all-inorganic CsPbIBr2 PSCs modified by BMIMAc (Target-1) significantly increases by 148 mV (from 1.213 to 1.361 V), resulting in the efficiency increasing to 10.30% from 7.87%. Unsealed Target-1 PSCs show outstanding long-term and thermal stability. During the accelerated degradation process (85 °C, RH: 50∼60%), the Target-1 PSCs achieve a champion PCE of 11.94% with a remarkable Voc of 1.403 V, while the control PSC yields a promising PCE of 10.18% with a Voc of 1.319 V. In particular, the Voc of 1.403 V is the highest Voc reported so far in carbon-electrode-based CsPbIBr2 PSCs. Moreover, this strategy enables the modified all-inorganic CsPbI2Br PSCs to achieve a Voc of 1.295 V and a champion efficiency of 15.20%, which is close to the reported highest PCE of 15.48% for all-inorganic CsPbI2Br PSCs prepared by a low-temperature process. This study provides a simple BMIMAc IL bridge to assist bifacial defect passivation and elevate the photovoltaic performance of all-inorganic CsPbIxBr3-x (x = 1, 2) PSCs.

Complex Metal Oxides as Emerging Inorganic Hole-Transporting Materials for Perovskite Solar Cells

Perovskite solar cells (PSCs) have achieved revolutionary progress during the past decades with a rapidly boosting rate in power conversion efficiencies from 3.8% to 26.1%. However, high-efficiency PSCs with organic hole-transporting materials (HTMs) suffer from inferior long-term stability and high costs. The replacement of organic HTMs with inorganic counterparts such as metal oxides can solve the above-mentioned problems to realize highly robust and cost-effective PSCs. Nevertheless, the widely used simple metal oxide-based HTMs are limited by the low conductivity and poor light transmittance due to the fixed atomic environment. As an emerging family of inorganic HTMs, complex metal oxides with superior structural/compositional flexibility have attracted rapidly increasing interest recently, showing superior carrier conductivity/mobility and superb light transmittance. Herein, the recent advancements in the design and development of complex metal oxide-based HTMs for high-performance PSCs are summarized by emphasizing the superiority of complex metal oxides as HTMs over simple metal oxide-based counterparts. Consequently, several distinct strategies for the design of complex metal oxide-based HTMs are proposed. Last, the future directions and remaining challenges of inorganic complex metal oxide-based HTMs for PSCs are also presented. This review aims to provide valuable guidelines for the further advancements of robust, high-efficiency, and low-cost PSCs.

Laser-Driven Insulator-Metal Phase Transitions in CsPbI3 Quantum Dots and Influence of Doped Metal Nanowires

All-inorganic CsPbI3 perovskite quantum dots (QDs) have received extensive attention in developing optoelectronic devices due to their outstanding properties. Here, using time-dependent density functional theory (TDDFT), the optical properties of the three distinct phases (α, γ, and δ) of the CsPbI3 QDs are investigated. Surprisingly, the δ phase structured QDs exhibit stronger optical absorption properties than the α and γ phase QDs when exposed to equivalent laser irradiation. Considering the quantum size effect, size regulation is also performed on the three structures, the results reveal a significant improvement in optical properties as the size increases in the direction of laser irradiation. More interestingly, Ag-hybrid QDs show better optical gain and maintain a laser-driven metallic state. Our results demonstrate the great potential of size adjustment and metal nanowire coupling in improving the optoelectronic properties of QDs and developing efficient photovoltaic devices.

Comprehensive guidance for optimizing the colloidal quantum dot (CQD) Perovskite solar cells: experiment and simulation

CsPbI3 perovskite quantum dots (CPQDs) have received great attention due to their potential in large-scale applications. Increasing the efficiency of CPQDs solar cells is an important issue that is addressed in this paper. Here, we have simulated a 14.61% colloidal CPQD solar cell with the least fitting parameter that shows the accuracy of the following results. The absorber layer properties are varied and different power conversion efficiency (PCE) is achieved for the new device. The results show that colloidal CsPbI3 material properties have a significant effect on the PCE of the device. Finally, the optimized parameters for the absorber layer are listed and the optimum efficiency of 29.88% was achieved for this case. Our results are interesting that help the researchers to work on CsPbI3 materials for the achievement of highly efficient, stable, large-scale, and flexible CPQDs solar cells.

A crosslinked network polypyrrole coated cobalt doped Fe2O3@carbon cloth flexible anode material for quasi-solid asymmetric supercapacitors

Iron(III) oxide (Fe2O3) exhibits a substantial theoretical specific capacitance and a broad operational voltage window, making it a prospective anode material. The crystal structure of Fe2O3 was altered through cobalt doping, and its electronic conductivity was improved by supporting it with carbon cloth (Co-Fe2O3@CC). Subsequently, a crosslinked network of polypyrrole (PPy) was synthesized onto Co-Fe2O3@CC via an ice-water bath, resulting in the formation of PPy/Co-Fe2O3@CC. This PPy nano-crosslinked network not only established three-dimensional electron transport pathways on the Fe2O3 surface but also amplified the composite material's specific surface area to 45.229 m2 g-1, thereby promoting its electrochemical performance. At a current density of 2 mA cm-2, PPy/Co-Fe2O3@CC displayed an area specific capacitance of 704 mF cm-2, a value 2.2 times higher than that of Co-Fe2O3@CC. The assembled PPy/Co-Fe2O3@CC//Ni-MnO2@CC asymmetric supercapacitor demonstrated an energy density of 1.41 mW h cm-3 at a power density of 54 mW cm-3, making the synthesized electrode material a promising candidate for flexible supercapacitors.

Construction of shell-core Co2P/Cd0.9Zn0.1S photocatalyst by electrostatic attraction for enhancing H2 evolution

Solar energy-driven photocatalytic decomposition of water to produce H₂ is of great significance for promoting the development of clean energy. To improve the efficiency of H₂ production, a novel spherical Co₂P/Cd_0.9Zn_0.1S (Co₂P/CZS) composite with shell-core structure was successfully synthesized by electrostatic attraction. Under visible light irradiation, the optimal Co₂P/CZS achieves an excellent H₂ rate of 16.05 mmol h^-1 g^-1 in benzyl alcohol (PhCH₂OH) solution, with a quantum efficiency of 34.3% at 450 nm. The Co₂P thin layer coated on the CZS surface not only facilitates the photogenerated charge transfer from Co₂P to CZS under visible light illumination, but reduces the energy barrier of PhCH₂OH oxidation and H₂ evolution. The present results show that shell-core Co₂P/CZS composite may be one of promising catalyst to enhance the activity of H₂ evolution, which provides an important reference basis for new catalyst design and wide prospects for further application of metal sulfides.

Realizing of ZSM-5 microspheres with enhanced catalytic properties prepared from iron ore tailings via solid-phase conversion method

The comprehensive utilization of iron ore tailings (IOTs) not only resolved environmental problems but also brought huge economic benefits. In this study, the synthetic route presented herein provides a novel method for the synthesis of ZSM-5 microspheres from IOTs. The effects of Si/Al molar ratios and the pH of the precursor solution on the formation of zeolite was evaluated by various analytical methods. The catalytic performance of the catalyst prepared by the solid-phase conversion method (denoted as MP-ZSM-5) was evaluated by methanol-to-propylene (MTP) reaction. Compared with the zeolite catalyst that synthesized via the conventional hydrothermal method (denoted as HM-ZSM-5), MP-ZSM-5 not only prolongs catalytic lifetime from 18.7 to 36.0 h but also has higher selectivity for propylene by MP-ZSM-5 (43.7%) than that for HM-ZSM-5 (38.6%). In addition, Kissinger-Akahira-Sunose (KAS) model is applied to the TG result to study the template removal process kinetics. The average activation energy values required for the removal of CTAB and TPABr are 201.11 ± 13.42 and 326.88 ± 16.91 kJ∙mol^-1, respectively. Furthermore, this result is well coupled with the model-free kinetic algorithms to determine the conversion and isoconversion of the TPABr and CTAB decomposition in ZSM-5, which serves as important guidelines for the industrial production process.

Influence of WO3-Based Antireflection Coatings on Current Density in Silicon Heterojunction Solar Cells

Antireflection coatings (ARCs) with an indium thin oxide (ITO) layer on silicon heterojunction solar cells (SHJ) have garnered significant attention, which is due to their potential for increasing current density (J_sc) and enhancing reliability. We propose an additional tungsten trioxide (WO₃) layer on the ITO/Si structure in this paper in order to raise the J_sc and demonstrate the influence on the SHJ solar cell. First, we simulate the J_sc characteristics for the proposed WO₃/ITO/Si structure in order to analyze J_sc depending on the thickness of WO₃ using an OPAL 2 simulator. As a result, the OPAL 2 simulation shows an increase in J_sc of 0.65 mA/cm² after the 19 nm WO₃ deposition on ITO with a doping concentration of 6.1 × 10²⁰/cm². We then fabricate the proposed samples and observe an improved efficiency of 0.5% with an increased J_sc of 0.75 mA/cm² when using a 20 nm thick WO₃ layer on the SHJ solar cell. The results indicate that the WO₃ layer can be a candidate to improve the efficiency of SHJ solar cells with a low fabrication cost.

Synchronously Producing H2 and Purifying Methyl Orange-Polluted Water through the Reaction of an Al-GaInSn Alloy Plate and H2O

Hydrogen gas (H₂) as a fuel has the advantages of high energy density (122 kJ g^-1) and zero carbon emissions. To meet the growing demand for H₂ in the future, green, efficient, and convenient production technologies must be developed. The Al-H₂O reaction, which produces H₂ by reacting aluminum (Al) with water (H₂O), is considered a rapid method for producing H₂. However, Al-H₂O creates a protective oxide layer on the surface of Al, preventing the production of H₂. In this study, we developed a simple method for forming Al-GaInSn alloy by brushing GaInSn-Al₂O₃ grease onto an Al plate to form an Al/GaInSn-Al₂O₃/Al sandwich structure. Al₂O₃ in the sample supports GaInSn, prevents the leakage of GaInSn, and promotes its penetration into the Al lattice to form Al-GaInSn alloy. By forming a liquid phase within the alloy, GaInSn increases the accessibility of Al to the reaction. As a result, the Al-GaInSn alloy can rapidly react with pure H₂O to produce H₂ at room temperature conditions, with yields as high as ∼93.2%. It was interesting to find that dye-polluted water (methyl orange) could be synchronically purified by the Al-H₂O reaction at the same time.

Three-in-one oxygen-deficient titanium dioxide in a pomegranate-inspired design for improved lithium storage

Defects engineering has played an ever-increasing important role in electrochemistry, especially secondary lithium batteries. TiO₂ is regarded as a promising anode due to its attractive cycling stability, low volume strain and great abundance, while challenges of intrinsic poor electrical and ionic conductivity remain to be addressed. Herein, we report a three-in-one oxygen vacancy (V_O)-involved pomegranate design for TiO_2-x/C composite anode, which provides highly improved electrical conduction, shortened Li⁺ pathway and promoted Li⁺ redox. N-doped mesoporous carbon acts as a robust scaffold to support the whole structure, electron highway and efficient reductant to generate V_O on TiO₂ nanoparticles during crystallization. Theoretical calculations reveal the crucial role of surface V_O on TiO₂ in Li electrochemistry. Resultantly, the optimal TiO_2-x/C anode achieves significantly enhanced cycling performance (203 mAh/g retained after 2000 cycles at 1 A/g). Postmortem analysis reveals the robustness of V_O and reasonable structure stability upon cycles for improved battery performance.

Scanning Electrochemical Microscope Studies of Charge Transfer Kinetics at the Interface of the Perovskite/Hole Transport Layer

Interfacial carrier transfer kinetics is critical to the efficiency and stability of perovskite solar cells. Herein, we measure the regeneration rate constant, absorption cross-section, reduction rate constant, and conductivity of hole transport layered perovskites using scanning electrochemical microscopy (SECM). The SECM feedback revealed that the regeneration rate constant, absorption cross-section, and reduction rate constant of the nickel oxide (NiO) layer perovskite layer are higher than those of the poly (3,4-ethyenedioxythiophene)-poly (styrenesulfonate) layered perovskite. Also, at a specific flux density ( $J_{hv}$ ), the value of the regeneration rate constant (keff) in both blue and red illuminations for the NiO/CH3NH3PbI3 film is significantly higher than in both PEDOT: PSS/CH3NH3PbI3 and FTO/CH3NH3PbI3 films. The difference in keff between layered and nonlayered perovskite conforms to the impact of the hole conducting layer on the charge transfer kinetics. According to the findings, SECM is a powerful approach for screening an appropriate hole transport layer for stable perovskite solar cells.

Creation and stabilization of carbon dots in silica-confined compartments with high thermal stability

Inspired by the formation procedures and high stability of ambers, we report herein a facile approach for the in situ creation and stabilization of carbon dots (CDs) in confined silica compartments by a solvothermal reaction and subsequent thermal treatment, and the endowed CDs exhibit the initial photoluminescence (PL) properties at 400 °C, which could be used to fabricate highly thermal-stable light-emitting diodes (LEDs) that work well at a current of 600 mA and temperature of 205 °C.

Multiphase Molybdenum Carbide Doped Carbon Hollow Sphere Engineering: The Superiority of Unique Double-Shell Structure in Microwave Absorption

In order to achieve excellent electromagnetic wave (EMW) absorption properties, the microstructure design and component control of the absorber are critical. In this study, three different structures made of Mo₂ C/C hollow spheres are prepared and their microwave absorption behavior is investigated. The Mo₂ C/C double-shell hollow spheres consisting of an outer thin shell and an inner rough thick shell with multiple EMW loss mechanisms exhibit good microwave absorption properties. In order to further improve the microwave absorption properties, MoC_1-x /C double-shell hollow spheres with different crystalline phases of molybdenum carbide are prepared to further optimize the EMW loss capability of the materials. Finally, MoC_1-x /C double-shell hollow spheres with α-phase molybdenum carbide have the best microwave absorption properties. When the filling is 20 wt.%, the minimum reflection loss at 1.8 mm is -50.55 dB and the effective absorption bandwidth at 2 mm is 5.36 GHz, which is expected to be a microwave absorber with the characteristics of "thin, light, wide, and strong".

Core-shell assembly of ZrO2 nanoparticles with ionic liquid: a novel and highly efficient heterogeneous catalysts for Biginelli and esterification reactions

Imidazolium sulfonic acid chloride grafted ZrO₂ nanoparticles (ZrO₂-IL) were synthesized through facile post-treatment of the nanoparticles with the imidazolium-sulfonic acid chloride ionic liquid. The immobilization of the ionic liquid over the ZrO₂ nanoparticles was evident from the XRD, SEM, TEM, Raman, BET, and XPS analysis. The results obtained from the XRD analysis clearly show that the catalyst has an orthorhombic structure and from the BET analysis it is evident that the surface is mesoporous with uniform pore sizes and pore distribution. Further evidence of immobilization of ionic liquid over the ZrO₂ NPs was obtained from the SEM, TEM, XPS, and Raman analysis. Under mild conditions, the synthesized heterostructure was used in the acid-catalyzed esterification of different acids. The ZrO₂-IL catalyst converts 99% of the acid to ester with a 98.9% yield in 1h. The material was also shown to be highly efficient as catalyst for the Biginelli reaction under solvent-free conditions, with the catalyst for dihydropyrimidin-2(1H)-one (DHPMs) in 1h with 99.2% conversion and 99% yield. The synergy between the ionic liquid catalyst and the substrates increased the catalytic efficiency and resulted in high-yield product conversion. The mechanism of both transformation reactions was investigated, as well as the synergy between ionic liquid and ZrO₂ nanoparticles for better catalytic efficiency was established.

Grain boundary sliding and distortion on a nanosecond timescale induce trap states in CsPbBr3: ab initio investigation with machine learning force field

Grain boundaries (GBs) in perovskite solar cells and optoelectronic devices are widely regarded as detrimental defects that accelerate charge and energy losses through nonradiative carrier trapping and recombination, but the mechanism is still under debate owing to the diversity of GB configurations and behaviors. We combine ab initio electronic structure and machine learning force field to investigate evolution of the geometric and electronic structure of a CsPbBr₃ GB on a nanosecond timescale, which is comparable with the carrier recombination time. We demonstrate that the GB slides spontaneously within a few picoseconds increasing the band gap. Subsequent structural oscillations dynamically produce midgap trap states through Pb-Pb interactions across the GB. After several hundred picoseconds, structural distortions start to occur, increasing the occurrence of deep midgap states. We identify a distinct correlation of the average Pb-Pb distance and fluctuations in the ion coordination numbers with the appearance of the midgap states. Suppressing GB distortions through annealing and breaking up Pb-Pb dimers by passivation can efficiently alleviate the detrimental effects of GBs in perovskites. The study provides new insights into passivation of the detrimental GB defects, and demonstrates that structural and charge carrier dynamics in perovskites are intimately coupled.

Study of MXene Ti3C2Tx quantum dot thin film on quartz bulk acoustic wave uncooled infrared sensors

The infrared absorption efficiency is essential for an infrared sensor. We propose a quartz bulk acoustic wave (BAW) uncooled infrared sensor coated with MXene quantum dot film. The infrared detection is realized by measuring the resonant frequency of a Y-cut quartz BAW sensitive unit. An infrared sensor is fabricated by MEMS process, then the MXene quantum dot film is coated through the spin coating technology. The mechanism of infrared absorption enhancement is analyzed. Test results show that after coating the film, the responsivity (R) of the sensor increased by nearly 41% at a wavelength of 830nm, from 10.88MHz/W to 15.28 MHz/W. The quartz BAW infrared sensor combined with MXene quantum dots film has the potential of high-performance infrared detection.

MXene-doped kapok fiber aerogels with oleophobicity for efficient interfacial solar steam generation

Although the evaporation efficiency of photothermal materials (PMs) in pure water and brine solutions has been extensively studied, there few research on the performance in complex oily wastewater. Herein, a new monolithic solar steam generator derived from kapok fiber-based MXene composite aerogel (named as KFs-MXene) was fabricated by dipping the aerogels (KFs) which composed of kapok fiber and sodium alginate (SA) as substrates in the suspension of MXene. Benefitting from the outstanding light absorption (about 97%), better thermal insulation (thermal conductivity, 0.05039 W m^-1 K^-1), abundant porosity (95.60%) and rapid water transportation. KFs-MXene show good interfacial solar steam generation (ISSG) performance, resulting in a high water evaporation rate of 1.47 kg m^-2h^-1 with an outstanding evaporation efficiency of 90.4% under 1 kW m^-2 irradiation. To improve the antifouling performance of KFs-MXene, chemically hydrophilic and oleophobic modification was applied, making the KFs-MXene can also be widely used in oily wastewater. Under 1 kW m^-2 illumination, the evaporation rate and energy conversion efficiency of KFs-MXene with hydrophilic and oleophobic modification (O-KFs-MXene) in 1 wt% oily water can reach to 1.40 kg m^-2h^-1 and 82.87%, and the evaporation efficiency and rate of O-KFs-MXene remain stable in the continuous 6 h solar driven interface evaporation process.

Synthesis, modification and application of titanium dioxide nanoparticles: a review

Titanium dioxide (TiO₂) has been heavily investigated owing to its low cost, benign nature and strong photocatalytic ability. Thus, TiO₂ has broad applications including photocatalysts, Li-ion batteries, solar cells, medical research and so on. However, the performance of TiO₂ is not satisfactory due to many factors such as the broad band gap (3.01 to 3.2 eV) and fast recombination of electron-hole pairs (10^-12 to 10^-11 s). Plenty of work has been undertaken to improve the properties, such as structural and dopant modifications, which broaden the applications of TiO₂. This review mainly discusses the aspects of TiO₂-modified nanoparticles including synthetic methods, modifications and applications.

Effect of Calcination Conditions on the Properties and Photoactivity of TiO2 Modified with Biuret

A simple wet impregnation-calcination method was used to obtain a series of novel non-metal doped TiO2 photocatalysts. Biuret was applied as C and N source, while raw titanium dioxide derived from sulfate technology process was used as TiO2 and S source. The influence of the modification with biuret and the effect of the atmosphere (air or argon) and temperature (500–800 °C) of calcination on the physicochemical properties and photocatalytic activity of the photocatalysts towards ketoprofen decomposition under simulated solar light was investigated. Moreover, selected photocatalysts were applied for ketoprofen photodecomposition under visible and UV irradiation. Crucial features affecting the photocatalytic activity were the anatase to rutile phase ratio, anatase crystallites size and non-metals content. The obtained photocatalysts revealed improved activity in the photocatalytic ketoprofen decomposition compared to the crude TiO2. The best photoactivity under all irradiation types exhibited the photocatalyst calcined in the air atmosphere at 600 °C, composed of 96.4% of anatase with 23 nm crystallites, and containing 0.11 wt% of C, 0.05 wt% of N and 0.77 wt% of S.

A Flexible Plasmonic-Membrane-Enhanced Broadband Tin-Based Perovskite Photodetector

Lead-free perovskite quantum dots (QDs) have been widely investigated for optoelectronic devices because of their excellent electrical and optical properties. However, optoelectronic devices based on such lead-free perovskites still have much lower performance than those made of Pb-based counterparts. Herein, we developed a lead-free photodetector with an enhanced broadband spectral response ranging from 300 to 630 nm. By balancing plasmonic near-field enhancement and surface energy quenching through precisely controlling the thickness of Al₂O₃ spacer between the CsSnBr₃ QDs and silver nanoparticle membrane, the photodetector with 5 nm thick Al₂O₃ experiences a maximum photocurrent enhancement of 6.5-fold at 410 nm, with a responsivity of 62.3 mA/W and detectivity of 4.27 × 10¹¹ Jones. Moreover, its photocurrent shows a negligible decrease after 100 cycles of bending, which is ascribed to the tension-offset induced by the self-assembled nanoparticle membrane. The proposed plasmonic membrane enhancement provides a great potential for high-performance perovskite optoelectronic devices.

Interface modification of an electron transport layer using europium acetate for enhancing the performance of P3HT-based inorganic perovskite solar cells

In recent years, although the power conversion efficiency (PCE) of thermally stable all-inorganic CsPbI₃ perovskite solar cells (PSCs) had shown a great progress, the most reported CsPbI₃ PSCs suffered from the large open-circuit voltage (V_oc) loss, which is related to severe nonradiative recombination and a mismatch in energy level at the transport layer/perovskite interface. In this work, europium acetate (EuAc₃) as a multifunction interface material is chosen to modify the TiO₂/perovskite interface, the crystal quality of CsPbI₃ perovskite films is improved, and both bulk and interfacial defects are reduced effectively. Meanwhile, the energy levels arrangement between TiO₂ and CsPbI₃ perovskites is also optimized, corresponding the raised built-in electric field afford a strength force to accelerate the transport and extraction of charge carriers from CsPbI₃ perovskites to TiO₂. As a result, the performance of CsPbI₃ PSCs is largely enhanced with the PCE of 16.76%. When an Ag electrode was replaced by Au, the PCE further improves to 17.92%, which is the highest for CsPbI₃ PSCs with P3HT as the HTL ever reported. Besides, the CsPbI₃ PSC with the EuAc₃ modification layer maintains 84% of the initial PCE under continuous UV irradiation for 250 h in a nitrogen filled glovebox, being obviously higher than the control devices with only 40% of the initial PCE after UV irradiation for 100 h in the same environment.

Characterization and performance evaluation of synthesized ZnO nanoflowers, nanorods, and their hybrid nanocomposites with graphene oxide for degradation of Orange G

Nanoflowers and nanorods of ZnO were synthesized via hydrothermal route. These morphologies of zinc oxide (ZnO) were then decorated over graphene oxide (GO) to yield hybrid nanocomposites, namely, GO-ZnO_nR and GO-ZnO_nF. The decoration of ZnO nanorods and nanoflowers on GO layers was confirmed through FESEM images. The synthesized nanocomposites were subjected to degrade the Orange G under identical conditions. The band gap energies determined using diffused reflectance spectra were 2.87, 2.89 eV for GO-ZnO_nR, and GO-ZnO_nF, whereas, for both ZnO_nR and ZnO_nF, it was 3.14 eV. For 50 min of UV irradiations (at 6 pH), 100% degradation was achieved corresponding to GO-ZnO_nR (44.1 m² g^-1) followed by 90.1%, 70.2%, and 68.3% with GO-ZnO_nF (35.9 m² g^-1), ZnO_nR (20 m² g^-1), and ZnO_nF (15.1 m² g^-1), respectively. Significant boost in the degradation of Orange G, with GO-ZnO_nR, was attributed to its reduced band gap, higher surface area, and enhanced charge separation. Kinetic study confirms the pseudo-first-order reaction rate. Mineralization efficiency of 91% in 120 min indicated the efficient reduction of Orange G and its intermediates. Further, reactive species trapping experiments revealed that photo-induced ^•OH are dominant radicals for the degradation followed by ^•O₂^- and h⁺. Liquid chromatography mass spectra data has been used to predict the plausible reaction pathways. Reusability studies indicated that GO-ZnO_nR can be used for four successive degradation cycles, without any significant activity loss.

A novel and facile synthesis strategy for highly stable cesium lead halide nanowires

As promising low-dimensional semiconductor materials, cesium lead halide (CsPbX₃, X = Cl, Br, I) perovskite-like nanowires (NWs) can be widely applied to the field of semiconductor devices and integrated optoelectronics. Therefore, developing a facile and efficient synthesis method of cesium lead halide perovskite-like NWs can bring both fundamental and practical impacts to the field of optoelectronics. Here, we developed a synthesis strategy of all-inorganic cesium lead halide CsPbI₃ perovskite-like NWs under catalyst-free, solution-phase, and low-temperature conditions. The synthesis strategy was designed such that no inert gas is required and thus enables the synthesis to be carried out in air, which significantly reduces temperature, steps, time, and cost required for the reaction. The as-synthesized NWs were 7 μm in length and 80–100 nm in diameter with ideal morphology. Most of the CsPbI₃ NWs were crystallized in orthorhombic phases that were arranged orderly with a uniform growth direction. In addition, the CsPbI₃ NWs showed a photoluminescence peak near 610 nm and the fluorescence lifetime was 7.34 ns. The photoluminescence mechanism of CsPbI₃ NWs involves the self-trapping behaviour in the radiative recombination process. The composition of CsPbI₃ NWs is highly related to the synthesis temperature. The facile synthesis strategy has opened up a novel path for the synthesis of perovskite-like NWs, laying the foundation for the application of nano-optoelectronic devices, fluorescent anti-counterfeiting, and fluorescent composite materials.

Under air ambient, low temperature, and short reaction time conditions, a facile operation step is proposed to synthesize CsPbI₃ nanowires.

Suppressing ion migration of CsPbBrxI3-xnanocrystals by Nickel doping and the application in high-efficiency WLEDs

All inorganic perovskite nanocrystals CsPbX₃(X = Cl, Br, I) are the great potential candidates for the application of high-performance light emitting diodes (LED) due to their high Photoluminescence Quantum Yield (PLQY), high defect tolerance, narrow full-width half-maximum and tunable wavelength of 410-700 nm. However, the application of red-emitting (630-650 nm) CsPbBr_xI_3-xnanocrystals are perplexed by phase segregation due to the composition of mixed halides and the difference in halide ion mobility. Herein, we provide an effective strategy to suppressing the migration of Br/I ions through Ni²⁺doping via a facile Hot-Injection method and the PLQY was improved as well. DFT calculations show that the introduction of Ni²⁺causes a slight contraction of the host crystal structure, which improves the bond energy between Pb and halides and reduces the level of surface defects. Therefore, the phase stability is improved by Ni²⁺doping because the phase segregation caused by ion migration in the mixed phase is effectively inhibited. Meanwhile, the non-radiative recombination in the exciton transition process is reduced and the PLQY is improved. What's more, benefiting from the suppressed ion migration and enhanced PLQY, we combine the Ni²⁺-doped CsPbBr_xI_3-xnanocrystals with different Br/I ratios and YAG: Ce³⁺phosphors as color conversion layers to fabricate high efficiency WLED. When the ratio of Br/I is 9:11, WLED has a color coordinate of (0.3621, 0.3458), the color temperature of 4336 K and presents a high luminous efficiency of 113.20 lm W^-1, color rendering index of 94.9 under the driving current of 20 mA and exhibits excellent stability, which shows great potential in the application of LED.

Unravelling halide-dependent charge carrier dynamics in CsPb(Br/Cl)3 perovskite nanocrystals

With an increasing bromide content in CsPb(Br/Cl)₃ perovskite nanocrystals (PNCs), the steady state photoluminescence quantum yield value increases from 28% to 50% to 76%. Ultrafast transient absorption analyses reveal that the normalized band edge population increases more than two-fold on excitation at the band edge with increasing bromide content, and the hot exciton trapping time increases from 450 fs to 520 fs to 700 fs with increasing bromide content. Ultrasensitive single particle spectroscopic analyses reveal that the peak of the ON fraction distribution increases from 0.65 to 0.75 to 0.85 with increasing bromide content. More specifically, the percentage of PNCs with the ON fraction >75% increases four fold from 24% to 50% to 98% with increasing bromide content. Moreover, the ratio of the detrapping rate and trapping rate increases more than 25 fold with an increase in bromide content, signifying the excitons remaining in the trap state for a smaller time with increasing bromide content. In order to standardize the measurement and analyses, all these three PNCs have the same size and shape, and all the excitations have been made at the same energy above the band edge for all three PNCs and for both ultrafast transient absorption and ultrasensitive single particle measurements.