Design of nickel cobalt molybdate regulated by boronizing for high-performance supercapacitor applications

Recent Development of Flexible and Stretchable Supercapacitors Using Transition Metal Compounds as Electrode Materials

Flexible and stretchable supercapacitors (FS-SCs) are promising energy storage devices for wearable electronics due to their versatile flexibility/stretchability, long cycle life, high power density, and safety. Transition metal compounds (TMCs) can deliver a high capacitance and energy density when applied as pseudocapacitive or battery-like electrode materials owing to their large theoretical capacitance and faradaic charge-storage mechanism. The recent development of TMCs (metal oxides/hydroxides, phosphides, sulfides, nitrides, and selenides) as electrode materials for FS-SCs are discussed here. First, fundamental energy-storage mechanisms of distinct TMCs, various flexible and stretchable substrates, and electrolytes for FS-SCs are presented. Then, the electrochemical performance and features of TMC-based electrodes for FS-SCs are categorically analyzed. The gravimetric, areal, and volumetric energy density of SC using TMC electrodes are summarized in Ragone plots. More importantly, several recent design strategies for achieving high-performance TMC-based electrodes are highlighted, including material composition, current collector design, nanostructure design, doping/intercalation, defect engineering, phase control, valence tuning, and surface coating. Integrated systems that combine wearable electronics with FS-SCs are introduced. Finally, a summary and outlook on TMCs as electrodes for FS-SCs are provided.

Surface Selenylation Engineering for Construction of a Hierarchical NiSe2/Carbon Nanorod: A High-Performance Nonenzymatic Glucose Sensor

As glucose (Glu) is an essential substance for metabolism as well as a symbol to diagnose diabetes, the demand of Glu sensors has increased significantly in recent decades. In this work, a hierarchical Ni-based electrochemical enzyme-free Glu sensor, namely, NiSe₂/CNR (carbon nanorod), was engineered through a facile thermal treatment using dimethylglyoxime dinickel salt with selenium (Se) powder. The prepared NiSe₂/CNR not only subtly introduces a hierarchical structure with rod-like carbon nanorods and rock-like NiSe₂ nanoparticles, which are extremely helpful in offering a greater catalytic activity area and more catalytic active sites, but also incorporates the Se element to increase the inherent activity. The fabricated NiSe₂/CNR exhibits distinguished performance for Glu detection in alkaline electrolytes with linear ranges of 0.5-411 μM and 411 μM to 6.311 mM, high sensitivities of 3636 μA mM^-1 cm^-2 at low concentrations, and 2121 μA mM^-1 cm^-2 at high concentrations, as well as a low detection limit of 380 nM (S/N = 3). It also possesses favorable reproducibility, stability, and long-term storage capacity. The practical feasibility of NiSe₂/CNR was also validated by detecting Glu in human serum. Moreover, the prepared hierarchical NiSe₂/CNR is of general interest for the construction of hierarchical Ni-based sensors.

Binder-Free Electrospun Ni-Mn-O Nanofibers Embedded in Carbon Shells with Ultrahigh Energy and Power Densities for Highly Stable Next-Generation Energy Storage Devices

We demonstrate the fabrication of binder-free electrospun nickel-manganese oxides embedded into carbon-shell fibrous electrodes. The morphological and structural properties of the assembled electrode materials were elucidated by high-resolution transmission electron microscopy (HR-TEM), field-emission scanning electron microscopy, and glancing-angle X-ray diffraction. The fibrous structure of the electrodes was retained even after annealing at high temperatures. The X-ray photoelectron spectroscopy and HR-TEM analyses revealed the formation of nickel and manganese oxides in multiple oxidation states (Ni²⁺, Ni³⁺, Mn²⁺, Mn³⁺, and Mn⁴⁺) embedded in the carbon shell. The embedded nickel-manganese oxides into the carbon matrix fibrous electrodes exhibit an excellent capacitance (1082 F/g) in 1 M K₂SO₄ at 1 A/g and possess a high rate capability of 73% at 5 A/g. The high rate capability and capacitance can be attributed to the presence of carbon cross-linked channels, the binder-free nature of the electrodes, and various oxidation states of the Ni-Mn oxides. The asymmetric supercapacitor device constructed of the as-fabricated nanofibers and the bio-derived microporous carbon as the positive and negative electrodes, respectively, sustains up to 1.9 V with a high specific capacitance at 1.5 A/g of 108 F/g. The nanofibrous//bio-derived device exhibits an outstanding specific energy of 54.2 W h/kg with a high specific power of 1425 W/kg. Interestingly, the tested device maintains a high capacitive retention of 92% upon cycling over 10,000 charging/discharging cycles.