Multi-Responsive Polymer Nanoparticles: A Versatile Platform for Double-Security Anticounterfeiting and Smart Food Packaging

Potential applications of colloidal polymer nanoparticles in the preparation of smart inks are investigated by physical incorporation of the oxazolidine molecules. Precise adjusting the polymer chain flexibility and polarity is achieved by controlling the ratio of methyl methacrylate and butyl acrylate monomers in the polymerization reaction. In addition, nanofibrous indicators of acid-base vapors are prepared from the latex nanoparticles. This can be beneficial for creating materials that sense and respond to environmental changes, such as humidity or moisture and acidity. Thermochromic inks are prepared by microencapsulating crystal violet lactone dye (CVL) in polymer matrices to prevent their release into the aqueous media. Combining two distinct systems with varying triggers, such as light and temperature, provides an effective strategy for double-encryption anticounterfeiting and crack and scratch detection and indication applications. Preparing labels impregnated with double-responsive inks, a novel approach is developed for food spoilage detection and preservation indication. Labels are manufactured using polymer nanoparticles, which contain photoluminescent oxazolidine molecules, as well as a trinary mixture of CVL within core-shell latex particles as the thermochromic dye. The combination of these two responsive elements transforms traditional packaging into a dynamic and interactive sentinel for the food it holds.

Nanoparticle-Based Tough Polymers with Crack-Propagation Resistance

Although thin elastomer films of polymer nanoparticles are regarded as environmentally friendly materials, the low mechanical strength of the films limits their use in various applications. In the present study, we investigated the fracture resistance of latex films composed of acrylic nanoparticles where a small quantity of a rotaxane crosslinker was introduced. In contrast to conventional nanoparticle-based elastomers, the latex films composed of the rotaxane-crosslinked nanoparticles exhibited unusual crack propagation behavior; the direction of crack propagation changed from a direction parallel to the crack to one perpendicular to the crack, resulting in an increase in tear resistance. These findings will help to broaden the scope of design of new types of tough polymers composed of environmentally friendly polymer nanoparticles.

Polymer Colloids: Current Challenges, Emerging Applications, and New Developments

Polymer colloids are complex materials that have the potential to be used in a vast array of applications. One of the main reasons for their continued growth in commercial use is the water-based emulsion polymerization process through which they are generally synthesized. This technique is not only highly efficient from an industrial point of view but also extremely versatile and permits the large-scale production of colloidal particles with controllable properties. In this perspective, we seek to highlight the central challenges in the synthesis and use of polymer colloids, with respect to both existing and emerging applications. We first address the challenges in the current production and application of polymer colloids, with a particular focus on the transition toward sustainable feedstocks and reduced environmental impact in their primary commercial applications. Later, we highlight the features that allow novel polymer colloids to be designed and applied in emerging application areas. Finally, we present recent approaches that have used the unique colloidal nature in unconventional processing techniques.

Photoluminescent Polymer Nanoparticles Based on Oxazolidine Derivatives for Authentication and Security Marking of Confidential Notes

Colloidal materials have widely been used to develop innovative anticounterfeiting nanoinks for information encryption. Latex nanoparticles based on methyl methacrylate (MMA) and 2-hydroxyethyl methacrylate (HEMA) bearing hydroxyl functional groups were synthesized via semicontinuous miniemulsion polymerization. The size determination of the nanoparticles and microscopic results showed mostly spherical nanoparticles with a narrow size distribution and a mean size of about 80 nm. Two oxazolidine derivatives were physically doped at the surface of the nanoparticles to prepare photoluminescent polymer nanoparticles. Hydroxyl functional groups at the surface of the nanoparticles led to their hydrogen bonding interactions with the doped luminescent compounds. Optical analysis of the photoluminescent nanoparticles displayed different fluorescence emission and UV-vis absorbance intensities based on the amount of polar groups located at the surface of colloidal nanoparticles. Reducing the particle size to below 100 nm along with increasing the surface area can assist the decrease of the light reflectance and improvement of the latex nanoparticles' efficiency in the anticounterfeiting industry. This preparation methodology can efficiently provide remarkable photoreversible anticounterfeiting nanoinks used in different applications, such as print marking, security encoded tags, labeling, probing, and handwriting.

Microspheres from light-a sustainable materials platform

Driven by the demand for highly specialized polymeric materials via milder, safer, and sustainable processes, we herein introduce a powerful, purely light driven platform for microsphere synthesis – including facile synthesis by sunlight. Our light-induced step-growth precipitation polymerization produces monodisperse particles (0.4–2.4 μm) at ambient temperature without any initiator, surfactant, additive or heating, constituting an unconventional approach compared to the classically thermally driven synthesis of particles. The microspheres are formed via the Diels-Alder cycloaddition of a photoactive monomer (2-methylisophthaldialdehyde, MIA) and a suitable electron deficient dienophile (bismaleimide). The particles are stable in the dry state as well as in solution and their surface can be further functionalized to produce fluorescent particles or alter their hydrophilicity. The simplicity and versatility of our approach introduces a fresh opportunity for particle synthesis, opening access to a yet unknown material class.

Photopolymerization provides a safe and mild fabrication pathway towards polymeric particles but the implementation of photochemistry from solution to dispersed media to produce particles is far from trivial. Here, the authors demonstrate an additive-free step-growth photopolymerization with sunlight, exploiting the photoinduced Diels-Alder to fabricate micrometer sized polymeric particles.

Controlled Synthesis and Photoresponsive Properties of Spiropyran End-Functionalized Poly(vinyl ether)s

Due to the need to develop smart materials for a variety of applications such as catalysts and drug delivery, the development of photoresponsive polymers is receiving increasing attention. In particular, the photoisomerization of spiropyran (SP), unlike many other photoresponsive compounds, has attracted attention because it dramatically changes not only the molecular structure but also the polarity of the molecule. However, in most cases where SP is used as a photoresponsive functional group, SP is introduced in the side chain of the polymer, and few cases have been reported in which SP is introduced at the end of the polymer chain. Therefore, we designed a new amphipathic poly(vinyl ether) with an SP moiety at the end of the polymer chain. First, an initiator having an SP moiety was synthesized and used for living cationic polymerization to synthesize a poly(vinyl ether) bearing an SP moiety at the end of the polymer chain. Furthermore, we investigated the photoresponsive properties of the obtained polymers, we found that self-assembly of the amphiphilic polymers could be controlled by photoirradiation.

Vat Photopolymerization of Reinforced Styrene-Butadiene Elastomers: A Degradable Scaffold Approach

Vat photopolymerization (VP) is a high-throughput additive manufacturing modality that also offers exceptional feature resolution and surface finish; however, the process is constrained by a limited selection of processable photocurable resins. Low resin viscosity (<10 Pa·s) is one of the most stringent process-induced constraints on resin processability, which in turn limits the mechanical performance of printed resin systems. Recently, the authors created a VP-processable photosensitive latex resin, where compartmentalization of the high molecular weight polymer chains into discrete particles resulted in the decoupling of viscosity from molecular weight. However, the monomers used to form the hydrogel green body resulted in decreased ultimate material properties due to the high cross-link density. Herein, we report a novel scaffold that allows for facile UV-based AM and simultaneously enhances the final part's material properties. This is achieved with a chemically labile acetal-containing cross-linker in conjunction with N-vinylpyrrolidone, which forms a glassy polymer after photocuring. Subsequent reactive extraction cleaves the cross-links and liberates the glassy polymer, which provides mechanical reinforcement of the geometrically complex VP-printed elastomer. With only a 0.1 wt % loading of photoinitiator, G'/G'' crossover times of less than 1 s and green body plateau moduli nearing 10⁵ Pa are obtained. In addition, removal of the hydrophilic and thermally labile scaffold results in decreased water uptake and increased thermal stability of the final printed part. Ultimate strain and stress values of over 650% and 8.5 MPa, respectively, are achieved, setting a new benchmark for styrene-butadiene VP elastomers.

Light- and mechanic field controlled dynamic soft matter materials

A photochemical reaction system that fuses photo- and mechanochemistry into one macromolecular design for light- and mechano-reversible modification of polymer endgroups is introduced.

Enzymatic and Chemical Approaches for Post-Polymerization Modifications of Diene Rubbers: Current state and Perspectives

Diene rubbers are polymeric materials which present elastic properties and have double bonds in the macromolecular backbone after the polymerization process. Post-polymerization modifications of rubbers can be conducted by enzymatic or chemical methods. Enzymes are environmentally friendly catalysts and with the increasing demand for rubber waste management, biodegradation and biomodifications have become hot topics of research. Some rubbers are renewable materials and are a source of organic molecules, and biodegradation can be conducted to obtain either oligomers or monomers. On the other hand, chemical modifications of rubbers by click-chemistry are important strategies for the creation and combination of new materials. In a way to expand the scope of uses to other non-traditional applications, several and effective modifications can be conducted with diene rubbers. Two groups of efficient tools, enzymatic, and chemical modifications in diene rubbers, are summarized in this review. By analyzing stereochemical and reactivity aspects, the authors also point to some applications perspectives for biodegradation products and to rational modifications of diene rubbers by combining both methodologies.

Droplet nucleation in miniemulsion thiol–ene step photopolymerization

Reaction parameters, such as droplet size, initiator solubility and monomer solubility, which are important in favouring droplet nucleation in a miniemulsion thiol–ene step polymerization are reviewed.

Directional mass transfer of azo molecular glass microsphere induced by polarized light in aqueous immersion media

Photoinduced mass transfer of azo polymer and azo molecular glass has been intensively investigated under various light irradiation conditions simply using air as the ambient environment. In this work, in order to understand the effects of the surrounding medium on the light-induced process, azo molecular glass microspheres adhered on a substrate were immersed in water and different aqueous solutions, and their mass transfer behavior was investigated by irradiation with linearly polarized light. The microspheres in the aqueous media showed significant deformation through directional mass transfer upon light irradiation and transformed into a series of shape-anisotropic particles as revealed by microscopic observations. Compared with their counterparts upon light irradiation in air, the particles immersed in the aqueous media exhibited larger elongation parallel to the substrate and higher shape anisotropy. Optical simulation showed that this was caused by the alteration of the direction of the electric vibration of the refracted light at the medium–microsphere interface, which controlled the mass transfer behavior. On the other hand, the viscosity of the aqueous media showed no effect on the mass transfer process induced by the irradiation. The photo-thermal effect on the mass transfer behavior was ruled out as the thermal dissipation through a liquid is much more efficient than that through air. On the basis of this, this methodology was also successfully employed in the photo-fabrication of anisotropic submicron-sized periodic structures in aqueous medium. These observations can supply deep understanding of this fascinating process induced by polarized light and extend the scope of its applications.

Directional mass transfer of azo molecular glass microspheres is comprehensively investigated upon polarized light irradiation in various aqueous immersion media, and the key factors to influence mass transfer and shape deformation are elucidated.

Plant-Inspired Multifunctional Fluorescent Hydrogel: A Highly Stretchable and Recoverable Self-Healing Platform with Water-Controlled Adhesiveness for Highly Effective Antibacterial Application and Data Encryption-Decryption

In recent years, hydrogels as an attractive class of intelligent soft materials have been applied in various advanced fields, including electronic materials, wearable devices, and wound dressing materials. However, it still remains a critical challenge to integrate information encryption transmission capability, antibacterial activity, high mechanical performance, adhesiveness, and self-healable ability into one material and achieve the synergistic characteristics through a simple method. In our study, a facile strategy of a plant-inspired hydrogel was proposed, which provides a novel initiator-free photo-cross-linked hydrogel system by simply mixing the coumarin derivative Pho-CA and the monomer in water, and then obtaining the hydrogel Gel-C-Am under the irradiation of UV light without adding any other cross-linking agents and initiators, and this process is very similar to the growth process of plants in nature. This novel hydrogel presents desirable mechanical properties (including twist, stretchability, and recoverability), which exhibits elongation of approximately 1600%. More interestingly, Gel-C-Am hydrogel displays reversible adhesiveness to various substrates (such as glass, paper, leaves, and rubber), and its adhesion properties can be regulated by water: the viscosity disappears when its surface becomes wet, and the viscosity will recover after the water evaporates. In addition, the developed hydrogel has certain self-healable ability. Two pieces of the Gel-C-Am hydrogel can combine together and reshape into one piece in water, and the fused hydrogel has uniform and interconnected pores under SEM. Based on the characteristic of Pho-CA whose fluorescence get recovery after UV irradiation, the hydrogel can be used in the field of encryption and decryption. Also, the resulting Gel-C-Am hydrogel shows an effective antibacterial activity and can potentially be addressed as antibacterial coatings. Taken together, the formation of the novel fluorescent hydrogel system is just like the growth of a plant in the presence of water and light, Pho-CA and the monomer will form a highly stretchable and recoverable self-healing hydrogel with water-controlled adhesiveness. The developed Gel-C-Am hydrogel shows favorable attributes and is suitable for applications in antibacterial polymeric coatings and information encryption transmission.

Photoinduced mass transfer of azo polymers from micrometer to submillimeter studied by a real-time single particle strategy

Photoinduced mass transfer of azo polymers is a fascinating function with potential applications in areas ranging from photonics and nanofabrication to cell biology. However, the true nature of this unique effect still remains elusive in many aspects due to its puzzling mechanism and lack of a way for real-time observation. This work presents a new strategy to study the photoinduced mass transfer through in situ optical microscopic observation and videoing on single particles under laser irradiation. By inspecting the shape evolution processes of the particles from the side view, both the scale and direction of the mass transfer can be well characterized in a real-time manner, which shows great advantages for carrying out the systematic investigation. The mass transfer behaviour was thus investigated using the microspheres with diameters (D) ranging from micrometer to submillimeter. The mass transfer in the direction of the electric vibration was observed to occur in different scales for azo polymers with different degrees of functionalization (DFs) controlled by the light penetration depths. With the varied combinations of particle sizes and DFs, the particles with diversified shape-anisotropy and complex morphologies were generated by the mass transfer. For the microspheres with sizes in micrometer and submillimeter scales, those formed from the azo polymers with extremely high DF (100%) and extremely low DF (1%) respectively exhibited the most efficient mass transfer to cause significant shape deformations. With the optical and thermal simulations, these observations are well rationalized by considering the optical power distribution, energy utilization efficiency and heat dissipation route. This study not only provides deep insight into the photoinduced mass transfer behavior, but also extends the mass transfer scale of the particles from micrometer to submillimeter for the first time.

100th Anniversary of Macromolecular Science Viewpoint: Polymerization of Cumulated Bonds: Isocyanates, Allenes, and Ketenes as Monomers

Polymer chemistry offers exciting opportunities to tailor the properties of soft materials through control of the composition of the polymers and their interaction with each other, additives, and surfaces. Ongoing advances in the synthesis of polymeric materials demonstrate the drive for materials with tailored properties for enhanced performance in the next generation of materials and devices. One class of small molecules that can serve as monomers in chain growth polymerization are cumulated double bonds of the general form X═Y═Z. The three most common classes of these molecules are isocyanates (N═C═O), allenes (C═C═C), and ketenes (C═C═O), each of which has been explored as monomers under a variety of conditions. The orthogonality of the two pi bonds of the cumulated double bonds (i.e., lack of conjugation) enables the formation of different polymer backbones from a single monomer, provided the regioreactivity is controlled. This Viewpoint outlines the use of these three cumulated double bonds as monomers, illustrating success and current limitations to established polymerization methods. We then provide an outlook to the future of cumulated double bonds as monomers for the generation of tailored polymer compositions.