Microfibers synthesized by wet-spinning of chitin nanomaterials: mechanical, structural and cell proliferation properties

Chitin nanofibers: recent advances in preparation and applications in biomedical and beyond

Chitin and chitosan-based nanofibers (ChNFs), derived from renewable sources, have emerged as promising biomaterials due to their unique properties such as high surface area, porosity, biocompatibility, and biodegradability. This review provides a comprehensive overview of ChNF extraction and synthesis, focusing on both top-down and bottom-up approaches. A comparative analysis of these methods is presented, highlighting the challenges, opportunities, environmental impact, cost-effectiveness, and quality consistency associated with each. The advantages of ChNFs over similar nanomaterials are elucidated, emphasizing their diverse applications in biomedical and environmental fields. Biomedical applications include drug delivery, tissue engineering, cancer treatment, wound healing, and biosensing. Environmental applications encompass water treatment, air filtration, agriculture, and biodegradable packaging. Despite their potential, challenges remain, including low solubility, unstable mechanical properties, and inconsistent quality, which limit their widespread use. This review also examines recent advancements in ChNF research, aiming to guide the development of efficient and environmentally friendly synthesis methods. By encouraging innovation in ChNF-based nanotechnologies, this research contributes to a more sustainable future.

Thiadiazole chitosan conjugates as a novel cosmetic ingredient for rinse-off hair conditioners: design, formulation, characterization and in silico-molecular docking studies

Recently, chitosan derivatives, as eco-sustainable and renewable products, have been recorded to be highly effective toward cosmetics with potent biological activity. The main core of this research is to develop an organic hair conditioner (OHC) based on two chitosan-thiadiazole conjugates, chitosan-(ethylthio‑thiadiazole) (CH-ETD) and chitosan-(benzylthio‑thiadiazole) (CH-BTD), with natural fragrances. A series of nine OHC formulae were prepared (CH1-CH3 for chitosan based OHC, E1-E3 for CH-ETD based OHC, and B1-B3 for CH-BTD based OHC) and characterized based on their visual examination, pH, thermal stability, dirt dispersion, moisturizing time, percentage of solid content, hair irritation, rinsing, combing, and the luster. The results showed that the pH values of all OHC formulae were 4.2-4.7 which is considered acceptable to avoid skin irritation. A distinctive film surrounds each individual hair shaft in the CH-ETD and CH-BTD treated groups when compared to control hair without the application of hair conditioner under a scanning electron microscope SEM with a magnification power of 100 μm. Additionally, every single hair shaft is clearly covered, and the control group exhibited noticeable hair issues that were not observed in the treated groups, which showed no signs of tangling. Due to the end-use performance properties of the formulated hair conditioner products, it can be concluded that the formulas of (CH, E2, and B2) were the best efficacy; hair easier to style, detangle the hair, retain moisture, not be very thick, not cause irritation or inflammation, minimize frizz, and create a protective barrier on the hair. These findings collectively validate the potential of CH-ETD and CH-BTD based formulations coupled with natural perfumery as a transformative approach to hair care, aligning with consumer preferences for both efficacy and environmental sustainability. Furthermore, in this work, docking studies have been conducted to provide theoretical proof about the significant roles of chitosan and keratin in hair growth and cosmetic applications (skin).

Nitric Oxide Releasing Nanomaterials for Cardiovascular Applications

A central paradigm of cardiovascular homeostasis is that impaired nitric oxide (NO) bioavailability results in a wide array of cardiovascular dysfunction including incompetent endothelium-dependent vasodilatation, thrombosis, vascular inflammation, and proliferation of the intima. Over the course of more than a century, NO donating formulations such as organic nitrates and nitrites have remained a cornerstone of treatment for patients with cardiovascular diseases. These donors primarily produce NO in the circulation and are not targeted to specific (sub)cellular sites of action. However, safe, and therapeutic levels of NO require delivery of the right amount to a precise location at the right time. To achieve these aims, several recent strategies aimed at therapeutically generating or releasing NO in living systems have shown that polymeric and inorganic (silica, gold) nanoparticles and nanoscale metal-organic frameworks could either generate NO endogenously by the catalytic decomposition of endogenous NO substrates or can store and release therapeutically relevant amounts of NO gas. NO-releasing nanomaterials have been developed for vascular implants (such as stents and grafts) to target atherosclerosis, hypertension, myocardial ischemia-reperfusion injury, and cardiac tissue engineering. In this review, we discuss the advances in design and development of novel NO-releasing nanomaterials for cardiovascular therapeutics and critically examine the therapeutic potential of these nanoplatforms to modulate cellular metabolism, to regulate vascular tone, inhibit platelet aggregation, and limit proliferation of vascular smooth muscle with minimal toxic effects.

Advances, challenges, and prospects for surgical suture materials

As one of the long-established and necessary medical devices, surgical sutures play an essentially important role in the closing and healing of damaged tissues and organs postoperatively. The recent advances in multiple disciplines, like materials science, engineering technology, and biomedicine, have facilitated the generation of various innovative surgical sutures with humanization and multi-functionalization. For instance, the application of numerous absorbable materials is assuredly a marvelous progression in terms of surgical sutures. Moreover, some fantastic results from recent laboratory research cannot be ignored either, ranging from the fiber generation to the suture structure, as well as the suture modification, functionalization, and even intellectualization. In this review, the suture materials, including natural or synthetic polymers, absorbable or non-absorbable polymers, and metal materials, were first introduced, and then their advantages and disadvantages were summarized. Then we introduced and discussed various fiber fabrication strategies for the production of surgical sutures. Noticeably, advanced nanofiber generation strategies were highlighted. This review further summarized a wide and diverse variety of suture structures and further discussed their different features. After that, we covered the advanced design and development of surgical sutures with multiple functionalizations, which mainly included surface coating technologies and direct drug-loading technologies. Meanwhile, the review highlighted some smart and intelligent sutures that can monitor the wound status in a real-time manner and provide on-demand therapies accordingly. Furthermore, some representative commercial sutures were also introduced and summarized. At the end of this review, we discussed the challenges and future prospects in the field of surgical sutures in depth. This review aims to provide a meaningful reference and guidance for the future design and fabrication of innovative surgical sutures. STATEMENT OF SIGNIFICANCE: This review article introduces the recent advances of surgical sutures, including material selection, fiber morphology, suture structure and construction, as well as suture modification, functionalization, and even intellectualization. Importantly, some innovative strategies for the construction of multifunctional sutures with predetermined biological properties are highlighted. Moreover, some important commercial suture products are systematically summarized and compared. This review also discusses the challenges and future prospects of advanced sutures in a deep manner. In all, this review is expected to arouse great interest from a broad group of readers in the fields of multifunctional biomaterials and regenerative medicine.

Recent Advancements in Electrospun Chitin and Chitosan Nanofibers for Bone Tissue Engineering Applications

Treatment of large segmental bone loss caused by fractures, osteomyelitis, and non-union results in expenses of around USD 300,000 per case. Moreover, the worst-case scenario results in amputation in 10% to 14.5% of cases. Biomaterials, cells, and regulatory elements are employed in bone tissue engineering (BTE) to create biosynthetic bone grafts with effective functionalization that can aid in the restoration of such fractured bones, preventing amputation and alleviating expenses. Chitin (CT) and chitosan (CS) are two of the most prevalent natural biopolymers utilized in the fields of biomaterials and BTE. To offer the structural and biochemical cues for augmenting bone formation, CT and CS can be employed alone or in combination with other biomaterials in the form of nanofibers (NFs). When compared with several fabrication methods available to produce scaffolds, electrospinning is regarded as superior since it enables the development of nanostructured scaffolds utilizing biopolymers. Electrospun nanofibers (ENFs) offer unique characteristics, including morphological resemblance to the extracellular matrix, high surface-area-to-volume ratio, permeability, porosity, and stability. This review elaborates on the recent strategies employed utilizing CT and CS ENFs and their biocomposites in BTE. We also summarize their implementation in supporting and delivering an osteogenic response to treat critical bone defects and their perspectives on rejuvenation. The CT- and CS-based ENF composite biomaterials show promise as potential constructions for bone tissue creation.

Microfluidics Based Generation of Curcumin Loaded Microfibrous Mat against Staphylococcus aureus Biofilm by Photodynamic Therapy

The rapid increase in multidrug resistant biofilm infections is a major concern for global health. A highly effective therapy is required for the treatment of biofilm related infections. In this study, curcumin loaded alginate microfibers were generated by using the microfluidic technique. In this strategy, alginate microfibers are used as a carrier for the encapsulation of curcumin and then are irradiated with blue light to assess the efficacy of a combined therapy (blue light + curcumin) against drug resistant Staphylococcus aureus (S. aureus). The advantage of utilizing photodynamic therapy (PDT) is the usage of a non-antibiotic mode to inactivate bacterial cells. In the presence of blue light, the curcumin loaded alginate microfibers have shown good eradication activity against biofilms formed by multidrug resistant S. aureus. We achieved different diameters of curcumin loaded alginate microfibers through manipulation of flow rates. The curcumin loaded microfibers were characterized for their size, morphology, and curcumin encapsulation. Further, the efficacy of these microfibers in the presence of blue light has been evaluated against biofilm forming S. aureus (NCIM 5718) through optical and electron microscopy. This study employs microfluidic techniques to obtain an efficacious and cost-effective microfibrous scaffold for controlled release of curcumin to treat biofilms in the presence of blue light.

Photocrosslinked Fish Collagen Peptide/Chitin Nanofiber Composite Hydrogels from Marine Resources: Preparation, Mechanical Properties, and an In Vitro Study

Fish collagen peptide (FCP) is a water-soluble polymer with easy accessibility, bioactivity, and reactivity due to its solubility. The gelation of FCP can be carried out by chemical crosslinking, but the mechanical strength of FCP hydrogel is very low because of its intrinsically low molecular weight. Therefore, the mechanical properties of FCP gel should be improved for its wider application as a biomaterial. In this study, we investigated the mechanical properties of M-FCP gel in the context of understanding the influence of chitin nanofibers (CHNFs) on FCP hydrogels. FCP with a number average molecular weight (M_n) of ca. 5000 was reacted with glycidyl methacrylate (GMA) and used for the preparation of photocrosslinked hydrogels. Subsequently, composite hydrogels of methacrylate-modified FCP (M-FCP) and CHNF were prepared by the photoirradiation of a solution of M-FCP containing dispersed CHNF at an intensity of ~60 mW/cm² for 450 s in the presence of 2-hydroxy-1-[4-(hydroxyethoxy)phenyl]-2-methyl-1-propanone (Irgacure 2959) as a photoinitiator. Compression and tensile tests of the FCP hydrogels were carried out using a universal tester. The compression and tensile strength of the hydrogel increased 10-fold and 4-fold, respectively, by the addition of 0.6% CHNF (20% M-FCP), and Young's modulus increased 2.5-fold (20% M-FCP). The highest compression strength of the M-FCP/CHNF hydrogel was ~300 kPa. Cell proliferation tests using fibroblast cells revealed that the hydrogel with CHNF showed good cell compatibility. The cells showed good adhesion on the M-FCP gel with CHNF, and the growth of fibroblast cells after 7 days was higher on the M-FCP/CHNF gel than on the M-FCP gel without CHNF. In conclusion, we found that CHNF improved the mechanical properties as well as the fibroblast cell compatibility, indicating that M-FCP hydrogels reinforced with CHNF are useful as scaffolds and wound-dressing materials.

Recent Progress in Electrospun Polyacrylonitrile Nanofiber-Based Wound Dressing

Bleeding control plays a very important role in worldwide healthcare, which also promotes research and development of wound dressings. The wound healing process involves four stages of hemostasis, inflammation, proliferation and remodeling, which is a complex process, and wound dressings play a huge role in it. Electrospinning technology is simple to operate. Electrospun nanofibers have a high specific surface area, high porosity, high oxygen permeability, and excellent mechanical properties, which show great utilization value in the manufacture of wound dressings. As one of the most popular reactive and functional synthetic polymers, polyacrylonitrile (PAN) is frequently explored to create nanofibers for a wide variety of applications. In recent years, researchers have invested in the application of PAN nanofibers in wound dressings. Research on spun nanofibers is reviewed, and future development directions and prospects of electrospun PAN nanofibers for wound dressings are proposed.

Nanochitin: Chemistry, Structure, Assembly, and Applications

Chitin, a fascinating biopolymer found in living organisms, fulfills current demands of availability, sustainability, biocompatibility, biodegradability, functionality, and renewability. A feature of chitin is its ability to structure into hierarchical assemblies, spanning the nano- and macroscales, imparting toughness and resistance (chemical, biological, among others) to multicomponent materials as well as adding adaptability, tunability, and versatility. Retaining the inherent structural characteristics of chitin and its colloidal features in dispersed media has been central to its use, considering it as a building block for the construction of emerging materials. Top-down chitin designs have been reported and differentiate from the traditional molecular-level, bottom-up synthesis and assembly for material development. Such topics are the focus of this Review, which also covers the origins and biological characteristics of chitin and their influence on the morphological and physical-chemical properties. We discuss recent achievements in the isolation, deconstruction, and fractionation of chitin nanostructures of varying axial aspects (nanofibrils and nanorods) along with methods for their modification and assembly into functional materials. We highlight the role of nanochitin in its native architecture and as a component of materials subjected to multiscale interactions, leading to highly dynamic and functional structures. We introduce the most recent advances in the applications of nanochitin-derived materials and industrialization efforts, following green manufacturing principles. Finally, we offer a critical perspective about the adoption of nanochitin in the context of advanced, sustainable materials.

Turning food waste to antibacterial and biocompatible fungal chitin/chitosan monofilaments

Here, cell wall of a zygomycete fungus, Rhizopus delemar, grown on bread waste was wet spun into monofilaments. Using the whole cell wall material omits the common chitosan isolation and purification steps and leads to higher material utilization. The fungal cell wall contained 36.9% and 19.7% chitosan and chitin, respectively. Solid state NMR of the fungal cell wall material confirmed the presence of chitosan, chitin, and other carbohydrates. Hydrogels were prepared by ultrafine grinding of the cell wall, followed by addition of lactic acid to protonate the amino groups of chitosan, and subsequently wet spun into monofilaments. The monofilament inhibited the growth of Bacillus megaterium (Gram+ bacterium) and Escherichia coli (Gram- bacterium) significantly (92.2% and 99.7% respectively). Cytotoxicity was evaluated using an in vitro assay with human dermal fibroblasts, indicating no toxic inducement from exposure of the monofilaments. The antimicrobial and biocompatible fungal monofilaments, open new avenues for sustainable biomedical textiles from abundant food waste.

Deconstruction and Reassembly of Renewable Polymers and Biocolloids into Next Generation Structured Materials

This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

Smart and Sustainable Hair Products Based on Chitin-Derived Compounds

According to previous research studies, consumers worldwide are searching for new natural-oriented hair products that are both skin and environmentally friendly. Worldwide waste and air pollution, with the consequent environmental disasters, represent the greatest risk to human health and economy, further increased by the COVID-19 pandemic. Among others, non-biodegradable molecules are present in hair products (fossil-based additives, surfactants, etc.) and macromolecules (plastics). Plastics waste is considered the most serious problem, representing a forecast amount of 460 million tons per year by 2030, 12% of which is reused or recycled. Most plastics consumed, therefore, go to landfills and incineration, also if their recycling is considered an important driver of industrial profitability. Thus, the use of biopolymers represents an interesting alternative to produce biodegradable goods and tissues. After an introduction to the worldwide waste problem and the hair structure, the present review proposes the possibility to make biodegradable tissues that, realized by chitin nanofibrils and nano-lignin as natural polymers, may be used to produce an innovative and smart cosmetic hairline. Chitin-derived compounds are considered interesting polymers to produce non-woven tissues able to repair the hair damages provoked by the aggressiveness of both the environment and some aggressive cosmetic treatments, such as setting, bleaching, permanent waving, and oxidative coloring. The possible activity, that positively charged polymers such as chitin could have, has been speculated, interfering with the constitution and organization of the hair fibrils’ structure, which is negatively charged. The possibility of selecting biopolymers for their packaging is also discussed. Moreover, the use of these biopolymers, obtained from forestry-agro-food waste, may be of help to safeguard the further consumption of natural raw materials, necessary for future generations, also maintaining the earth’s biodiversity.