AuNPs@PMo12 nanozyme: highly oxidase mimetic activity for sensitive and specific colorimetric detection of acetaminophen

An Au@CuS@CuO2 nanoplatform with peroxidase mimetic activity and self-supply H2O2 properties for SERS detection of GSH

The abnormal fluctuations of glutathione (GSH) in vivo often reflect disease progression and are closely linked to human metabolism and physiological functions. Highly sensitive and selective detection of GSH is crucial for guiding early diagnosis and treatment; however, achieving this remains a significant challenge. In this study, we developed an enzyme activity sensor platform for the efficient detection of GSH. This platform utilizes Au@CuS core-shell materials loaded with CuO2 nanoparticles to create a composite nanosensor system. Under slightly acidic conditions, CuO2 on the nanomaterial's surface decomposes into H2O2 and Cu2+ ions. The generated H2O2 then reacts with tetramethylbenzidine (TMB) in the presence of peroxidase-like CuS to yield oxidized tetramethylbiphenyl (OXTMB), which generates a distinctive Raman signal. Upon addition of GSH to the system, the unique OXTMB signal diminishes due to GSH's strong antioxidant capacity and the consequent consumption of OXTMB. This sensing method enables sensitive detection of GSH, with a detection limit as low as 1.2 × 10-13 mol∙L-1. This approach holds promise for providing researchers with rapid and precise in vitro analysis of GSH, serving as an indicator for early disease diagnosis and real-time evaluation of treatment efficacy.

CoCu@NC Nanozyme with pH-Switchable and Dual Enzymatic Activity: Highly Sensitive Colorimetric Sensing of Doxorubicin and Naked-Eye Detection of H2O2-Induced DNA Damage

The development of nanomaterials with multienzyme activity for advanced sensing and biosensing assays has attracted attention. In this study, a Cu-Co bimetallic nitrogen-doped carbon catalyst (CoCu@NC) was synthesized. The prepared nanomaterials exhibit catalase- and oxidase-like mimicking activities by adjusting the pH. The catalase-like activity of the CoCu@NC was investigated by quenching of terephthalic acid (TA) fluorescence at pH 11 in the presence of H2O2, while its oxidase behavior was confirmed by oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) as chromogenic substrate in the presence of O2 at pH 3. Furthermore, CoCu@NC's oxidase-like activity was used successfully to detect hydroquinone (HQ) at a concentration range of 1-900 nM with a detection limit of 0.22 nM and the anticancer drug doxorubicin (DOX) with a wide linear response ranging from 5 fM to 200 pM and an exceptionally low detection limit of 1.66 fM by reduction of oxTMB to TMB. DOX interacts in situ with single-stranded (ssDNA) and double-stranded DNA (dsDNA), reducing the quinone ring in its structure to hydroquinone (HQ) and oxidizing guanine bases to 8-oxoguanine. Based on this phenomenon, we designed a label-free colorimetric sensor for measuring DNA damage (ranging from 1 pM to 1 μM), in which this sensor operates by the disappearance of the blue oxTMB solution and the presence of the DNA/DOX. Furthermore, this designed sensor is sensitive to the number of guanine bases in ssDNA and dsDNA. As the number of guanine bases (1-12) in DNA sequences increases, a greater color change is observed. Finally, in the presence of H2O2-induced DNA damage, no intercalation occurred between DOX and the DNA-damaged sequences, with the color change observable with the naked eye. Therefore, this visualization assay demonstrates a low-cost, simple, rapid, sensitive, and effective method for detecting DOX drug and damaged DNA. Additionally, CoCu@NC magnetic nanostructures could be easily recollected and reused by applying a magnetic field.

Sonochemical synthesis of graphene oxide-Ag2O nanozyme as an oxidize-like mimic for the highly sensitive detection of lithium in blood serum

Bipolar disorder is commonly treated with lithium carbonate. The concentration of lithium in the blood serum should be closely monitored in patients who require long-term lithium therapy. To date, no colorimetric method of detecting lithium ions has been reported using nanosensors. We have developed a novel chemosensor based on nanozyme (NZ) to address this clinical need. The GO-Ag2O NZs were synthesized by a sonochemical method and used as a colorimetric nanosensor to detect lithium ions in human blood serum (Li (I)). To characterize NZs, various techniques were employed, including XRD, FTIR, TEM, FESEM, EDX, Raman spectroscopy, BET, DLS, Zeta potential, and ICP-OES. According to TEM and FESEM images of GO-Ag2O, the nanoparticles (NPs) of Ag2O are uniformly distributed on the surface of 2D graphene oxide sheets. In addition, silver oxide nanoparticles exhibited a cubic morphology with an average size of 3.5 nm. We have examined the performance of the NZs in an aqueous medium and in human blood serum that contains Li (I). A colorimetric test revealed that NZs synthesized in the presence of ultrasound were more sensitive to Li (I). According to the linearity of the calibration curves' ranges, Li (I) has a limit of detection (LOD) of 0.01 µg/mL. Furthermore, it displayed a linear range between 0 and 12 µg/mL. GO-Ag2O NZs showed noticeable color changes from green to orange after exposure to Li (I). An incubation time of two minutes was found to be the most effective for sensing. This innovative approach provides a reliable method for monitoring lithium levels and ensuring patient safety during long-term lithium therapy for bipolar disorder.

Naked-eye sensitive detection of nanoPET by pH-responsive colorimetric method based on dual-enzyme catalysis

A pH-responsive colorimetric method based on dual-enzyme catalysis for rapid and facile detection and quantification of nanoPET at environment-dependent concentration is proposed. The nanoPET was hydrolyzed by the synergistic catalysis of cutinase and lipase to terephthalic acid which can be sensitive detected using bromocresol purple as the indicator. The color changed from purple to bright yellow as the nanoPET detection concentration increased from 0 mg/mL to 2 mg/mL which can be detected by UV-Vis. This naked-eye method has a high sensitivity for nanoPET detection with the visual detection cutoff of 31.00 μg/mL, and has a good linearity in the range of 0 ∼ 1 mg/mL with LOD of 22.84 μg/mL. The reliability of this method is verified in the detection of nanoPET in lake water and beer samples, with an average recovery of 87.1 %. The as-developed dual-enzyme colorimetric chemosensor holds promising potential as a robust and effective platform for the sensitive detection of nanoPET.

Rapid and sensitive detection of SARS-CoV-2 virus in human saliva samples using glycan based nanozyme: a clinical study

A highly sensitive colorimetric method (glycan-based nano(e)zyme) was developed for sensitive and rapid detection of the SARS-CoV-2 virus based on N-acetyl neuraminic acid (sialic acid)-functionalized gold nanoparticles (SA-Au NZs). A number of techniques were used to characterize the prepared nanomaterials including XRD, FT-IR, UV-vis, DLS, and TEM. DLS analysis indicates an average hydrodynamic size of 34 nm, whereas TEM analysis indicates an average particle size of 15.78 nm. This observation confirms that water interacts with nanoparticle surfaces, resulting in a large hydrodynamic diameter. The peroxidase-like activity of SA-Au NZs was examined with SARS-CoV-2 and influenza viruses (influenza A (H1N1), influenza A (H3N2), and influenza B). UV-visible spectroscopy was used to monitor and record the results, as well as naked eye detection (photographs). SA-Au NZs exhibit a change in color from light red to purple when SARS-CoV-2 is present, and they exhibit a redshift in their spectrum. N-acetyl neuraminic acid interacts with SARS-CoV-2 spike glycoprotein, confirming its ability to bind glycans. As a result, SA-Au NZs can detect COVID-19 with sensitivity and specificity of over 95% and 98%, respectively. This method was approved by testing saliva samples from 533 suspected individuals at Ghaem Hospital of Mashhad, Mashhad, Iran. Sensitivity and specificity were calculated by comparing the results with the definitive results. The positive results were accompanied by a color change from bright red to purple within five minutes. Statistical analysis was performed based on variables such as age, gender, smoking, diabetes, hypertension, and lung involvement. In clinical trials, it was demonstrated that this method can be used to diagnose SARS-CoV-2 in a variety of places, such as medical centers, hospitals, airports, universities, and schools.

Zeolitic Imidazolate Framework-8 Composite-Based Enzyme-Linked Aptamer Assay for the Sensitive Detection of Deoxynivalenol

The mycotoxin deoxynivalenol (DON) is a prevalent contaminant in cereals that threatens the health of both humans and animals and causes economic losses due to crop contamination. The rapid and sensitive detection of DON is essential for food safety. Herein, a colorimetric biosensor based on horseradish peroxidase- and gold nanoparticle-encapsulated zeolitic imidazolate framework-8 (HRP&Au@ZIF-8) was developed for the sensitive screening of DON. The synthesized HRP&Au@ZIF-8 probes not only held great potential for signal amplification but also exhibited stable catalytic activity even under extreme conditions, which endowed the biosensor with both good sensitivity and stability. Under the optimized conditions, qualitative measurement of DON can be achieved through visual inspection, and quantitative evaluation can be performed via absorbance measurements at a characteristic wavelength of 450 nm. The proposed method has demonstrated high sensitivity with a linear detection range of 1-200 ng/mL and a detection limit of 0.5068 ng/mL. It also presented good selectivity and reliability. Furthermore, DON in spiked cereal samples has been quantified successfully using this method. This novel approach demonstrates significant potential for the facile and expeditious detection of DON in cereal products and brings us one step closer to enhancing food safety.

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.

Determination Methods of the Risk Factors in Food Based on Nanozymes: A Review

Food safety issues caused by foodborne pathogens, chemical pollutants, and heavy metals have aroused widespread concern because they are closely related to human health. Nanozyme-based biosensors have excellent characteristics such as high sensitivity, selectivity, and cost-effectiveness and have been used to detect the risk factors in foods. In this work, the common detection methods for pathogenic microorganisms, toxins, heavy metals, pesticide residues, veterinary drugs, and illegal additives are firstly reviewed. Then, the principles and applications of immunosensors based on various nanozymes are reviewed and explained. Applying nanozymes to the detection of pathogenic bacteria holds great potential for real-time evaluation and detection protocols for food risk factors.

Naked-Eye Detection of Morphine by Au@Ag Nanoparticles-Based Colorimetric Chemosensors

In this study, we report a novel and facile colorimetric assay based on silver citrate-coated Au@Ag nanoparticles (Au@AgNPs) as a chemosensor for the naked-eye detection of morphine (MOR). The developed optical sensing approach relied on the aggregation of Au@Ag NPs upon exposure to morphine, which led to an evident color variation from light-yellow to brown. Au@Ag NPs have been prepared by two different protocols, using high- and low-power ultrasonic irradiation. The sonochemical method was essential for the sensing properties of the resulting nanoparticles. This facile sensing method has several advantages including excellent stability, selectivity, prompt detection, and cost-effectiveness.

Peroxidase catalytic activity of carbon nanoparticles for glutathione detection

Peroxidases are present widely in microorganisms and plants, and catalyze many reactions. However, the activity of natural peroxidases is susceptible to external conditions. We prepared carbon nanoparticles (CNPs) using an environmentally friendly and simple method. These CNPs were demonstrated to possess intrinsic peroxidase-like activity. CNPs could catalyze the reaction of a peroxidase substrate, 3,3,5,5-tetramethylbenzidine (TMB), in the presence of H2O2 to produce a blue solution at 652 nm. CNPs exhibited higher peroxidase activity than that of other carbon-based nanomaterials. Moreover, CNPs retained their high peroxidase activity after being reused several times. Glutathione (GSH) can change the blue color of oxidized TMB into a colorless hue at 652 nm. Based on this fact, qualitative and quantitative approaches were employed to detect GSH using a colorimetric method. This method showed a broad detection range (2.5-50 μM) with a limit of detection of 0.26 μM. This method was shown to be accurate for GSH detection in a cell culture medium compared with that using a commercial assay kit. Our findings could facilitate application of CNPs in biomedical areas.

Supported copper on a diamide-diacid-bridged PMO: an efficient hybrid catalyst for the cascade oxidation of benzyl alcohols/Knoevenagel condensation

In this study, a novel periodic mesoporous organosilica (PMO) containing diamide-diacid bridges was conveniently prepared using ethylenediaminetetraacetic dianhydride to support Cu(ii) species and affording supramolecular Cu@EDTAD-PMO nanoparticles efficiently. Fourier transform infrared (FT-IR) and energy dispersive X-ray (EDX) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller (BET) analysis, and high-resolution transmission electron microscopy (HRTEM) results confirmed the successful synthesis of Cu@EDTAD-PMO. The stabilized Cu(ii) nanoparticles inside the mesochannels of the new PMO provided appropriate sites for selective oxidation of different benzyl alcohol derivatives to their corresponding benzaldehydes and subsequent Knoevenagel condensation with malononitrile. Therefore, Cu@EDTAD-PMO can be considered as a multifunctional heterogeneous catalyst, which is prepared easily through a green procedure and demonstrates appropriate stability with almost no leaching of the Cu(ii) nanoparticles into the reaction medium, and easy recovery through simple filtration. The recycled Cu@EDTAD-PMO was reused up to five times without significant loss of its catalytic activity. The stability, recoverability, and reusability of the designed heterogeneous catalyst were also studied under various reaction conditions.