Efficient microwave-assisted Suzuki–Miyaura cross-coupling reaction of 3-bromo pyrazolo[1,5-a]pyrimidin-5(4H)-one: towards a new access to 3,5-diarylated 7-(trifluoromethyl)pyrazolo[1,5-a]pyrimidine derivatives

An Efficient Synthesis of 3,5-Bis-Aminated Pyrazolo[1,5-a]Pyrimidines: Microwave-Assisted Copper Catalyzed C-3 Amination of 5-Amino-3-Bromo-Substituted Precursors

An efficient method has been developed for the rapid production of diverse arrays of 3,5-bis-aminated pyrazolo[1,5-a]pyrimidines. The method utilizes CuI (5 mol%) and carbazole-based ligand L-1 (N-(9H-carbazol-9-yl)-1H-pyrrole-2-carboxamide) (10 mol%) for efficient Ullmann-type coupling of various amines to 5-amino-3-bromopyrazolo[1,5-a]pyrimidine precursors after heating in diethylene glycol (DEG) for only 1 h at 80 °C (microwave heating). 3,5-Bis-aminated products were obtained in good to excellent yields (60-93%, 83% average for 29 examples). 1° and 2° alkylamines, as well as a variety of aryl- or heteroarylamines coupled efficiently, and 1° and 2° alkyl (or aryl) amines at C-5 were well tolerated. The optimized conditions worked well on both the 50 mg and 1.0 g scales and gave products in only two steps from commercially available 3-bromo-5-chloropyrazolo[1,5-a]pyrimidine. Advantages provided by this method include short reaction time, excellent yields, broad substrate scope, and avoidance of toxic reagents commonly utilized for reductive aminations of C-3 NH2 substituted precursors.

Microwave-Assisted Buchwald-Hartwig Double Amination: A Rapid and Promising Approach for the Synthesis of TADF Compounds

We herein report a microwave-assisted Buchwald-Hartwig double amination reaction to synthesize potential thermally activated delayed fluorescence compounds, forming C(sp2)-N bonds between donor and acceptor units. Our approach reduces reaction times from 24 h to 10-30 min and achieves moderate to excellent yields, outperforming conventional heating methods. The method is compatible with various aryl bromides and secondary amines, including phenoxazine, phenothiazine, acridine, and carbazole. Density functional theory calculations have attributed the lack of reactivity with high energy barriers in the reductive elimination (RE) steps. Electron-withdrawing groups such as CF3 increase the RE barrier, resulting in a 0% yield, while substituting carbazole with acridine lowers the barriers and enhances higher yields. Distortion-interaction analysis highlights steric hindrance as a key factor affecting the reaction outcome when the RE barrier is low and steric hindrance is minimal. This microwave-assisted method not only demonstrates a superior performance in terms of higher yields and shorter reaction times but also offers significant potential for reducing production costs of these materials.

Quinolinyl-based multitarget-directed ligands with soluble epoxide hydrolase and fatty acid amide hydrolase inhibitory activities: Synthetic studies and pharmacological evaluations

Simultaneous inhibition of soluble epoxide hydrolase (sEH) and fatty acid amide hydrolase (FAAH) with a single small molecule represents a novel therapeutic approach in treating inflammatory pain, since both targets are involved in pain and inflammation processes. In this study using multi-target directed ligands methodology we designed and synthesized 7 quinolinyl-based dual sEH/FAAH inhibitors, using an optimized microwave-assisted Suzuki-Miyaura coupling reaction and tested their potency in human FAAH and human, rat, and mouse sEH inhibition assays. The structure-activity relationship study showed that quinolinyl moiety is well tolerated in the active sites of both enzymes, yielding several very potent dual sEH/FAAH inhibitors with the IC50 values in the low nanomolar range. The most potent dual inhibitor 4d was further evaluated in stability assay in human and rat plasma where it performed better than the standard Warfarin while in vivo study revealed that 1 mg/kg 4d can inhibit acute inflammatory pain in male rats to a similar degree as the traditional nonsteroidal anti-inflammatory drug ketoprofen (30 mg/kg) after intraperitoneal injection. ADMET prediction studies for this dual inhibitor show favorable pharmacokinetic properties which will guide the future in vivo evaluations.

Synthesis of Trifluoromethylated Pyrimido[1,2-b]indazole Derivatives through the Cyclocondensation of 3-Aminoindazoles with Ketoester and Their Functionalization via Suzuki-Miyaura Cross-Coupling and SNAr Reactions

A new series of trifluoromethylated pyrimido[1,2-b]indazol-4(1H)-one derivatives was synthesized with good to excellent yields through a simple condensation of 3-aminoindazole derivatives with ethyl 4,4,4-trifluoro 3-oxobutanoate. The functionalization of the corresponding chlorinated fused tricyclic scaffolds via Suzuki-Miyaura and aromatic nucleophilic substitution reactions led to the synthesis of highly diverse trifluoromethylated pyrimido[1,2-b]indazole derivatives with good yields.

Recent developments on microwave-assisted organic synthesis of nitrogen- and oxygen-containing preferred heterocyclic scaffolds

In recent decades, the utilization of microwave energy has experienced an extraordinary surge, leading to the introduction of innovative and revolutionary applications across various fields of chemistry such as medicinal chemistry, materials science, organic synthesis and heterocyclic chemistry. Herein, we provide a comprehensive literature review on the microwave-assisted organic synthesis of selected heterocycles. We highlight the use of microwave irradiation as an effective method for constructing a diverse range of molecules with high yield and selectivity. We also emphasize the impact of microwave irradiation on the efficient synthesis of N- and O-containing heterocycles that possess bioactive properties, such as anti-cancer, anti-proliferative, and anti-tumor activities. Specific attention is given to the efficient synthesis of pyrazolopyrimidines-, coumarin-, quinoline-, and isatin-based scaffolds, which have been extensively studied for their potential in drug discovery. The article provides valuable insights into the recent synthetic protocols and trends for the development of new drugs using heterocyclic molecules.

Stepwise synthesis of 2,6-difunctionalized ethyl pyrazolo[1,5-a]pyrimidine-3-carboxylate via site-selective cross-coupling reactions: experimental and computational studies

A variety of novel disubstituted 2-(alknyl, aryl and arylamine)-6-alkynylpyrazolo[1,5-a]pyrimidine derivatives was prepared via sequential site-selective cross-coupling reactions from 2,6-dibromopyrazolo[1,5-a]pyrimidine 3. The regio-controlled Sonogashira-type coupling of 3 with a wide range of terminal alkynes proceeded smoothly with excellent selectivity in favor of the C6-position through careful adjustment of the coupling conditions, followed by the subsequent introduction of alkynyl, aryl or arylamine groups at the C2-position via the Sonogashira, Suzuki-Miyaura and Buchwald-Hartwig coupling reactions, respectively. These promising results allow for further use and diversification of the chemically and biologically interesting pyrazolo[1,5-a]pyrimidine scaffold. In addition, computational studies were conducted to provide explanations for the origin of regioselectivity.

D-π-A-Type Pyrazolo[1,5-a]pyrimidine-Based Hole-Transporting Materials for Perovskite Solar Cells: Effect of the Functionalization Position

Donor−acceptor (D−A) small molecules are regarded as promising hole-transporting materials for perovskite solar cells (PSCs) due to their tunable optoelectronic properties. This paper reports the design, synthesis and characterization of three novel isomeric D-π-A small molecules PY1, PY2 and PY3. The chemical structures of the molecules consist of a pyrazolo[1,5-a]pyrimidine acceptor core functionalized with one 3,6-bis(4,4′-dimethoxydiphenylamino)carbazole (3,6-CzDMPA) donor moiety via a phenyl π-spacer at the 3, 5 and 7 positions, respectively. The isolated compounds possess suitable energy levels, sufficient thermal stability (Td > 400 °C), molecular glass behavior with Tg values in the range of 127−136 °C slightly higher than that of the reference material Spiro-OMeTAD (126 °C) and acceptable hydrophobicity. Undoped PY1 demonstrates the highest hole mobility (3 × 10−6 cm2 V−1 s−1) compared to PY2 and PY3 (1.3 × 10−6 cm2 V−1 s−1). The whole isomers were incorporated as doped HTMs in planar n-i-p PSCs based on double cation perovskite FA0.85Cs0.15Pb(I0.85Br0.15)3. The non-optimized device fabricated using PY1 exhibited a power conversion efficiency (PCE) of 12.41%, similar to that obtained using the reference, Spiro-OMeTAD, which demonstrated a maximum PCE of 12.58% under the same conditions. The PY2 and PY3 materials demonstrated slightly lower performance in device configuration, with relatively moderate PCEs of 10.21% and 10.82%, respectively, and slight hysteresis behavior (−0.01 and 0.02). The preliminary stability testing of PSCs is also described. The PY1-based device exhibited better stability than the device using Spiro-OMeTAD, which could be related to its slightly superior hydrophobic character preventing water diffusion into the perovskite layer.

Simple and Expedient Access to Novel Fluorinated Thiazolo- and Oxazolo[3,2-a]pyrimidin-7-one Derivatives and Their Functionalization via Palladium-Catalyzed Reactions

An efficient, versatile, and one-pot method for the preparation of novel fluorinated thiazolo- and oxazolo[3,2-a]pyrimidin-7-ones is described from 2-aminothiazoles or 2-amino-oxazoles and fluorinated alkynoates. This transformation, performed under transition-metal-free conditions, offers new fluorinated cyclized products with good to excellent yields. Moreover, the functionalization of these N-fused scaffolds via the Suzuki-Miyaura and Sonogashira cross-coupling reactions led to the synthesis of highly diverse thiazolo- and oxazolo[3,2-a]pyrimidin-7-ones.

A Green Synthesis Strategy of Binuclear Catalyst for the C-C Cross-Coupling Reactions in the Aqueous Medium: Hiyama and Suzuki-Miyaura Reactions as Case Studies

Cellulose, as a green and available phytochemical, was immobilized on the surface of magnetite nanoparticles then doped with imidazole and Co. complex (Fe3O4@CNF ∼ ImSBL ∼ Co.) and used as a water-dispersible, recyclable and efficient nano catalyst for the synthesis of C-C cross-coupling reactions including fluoride-free Hiyama and Suzuki reactions in an aqueous medium as an efficient and vital solvent, due to their high application and importance in various fields of science. Different spectroscopic and microscopic techniques were used for the catalyst characterization such XRD, FESEM, TEM, FT-IR, EDX, DLS, VSM, UV-Vis, and ICP analyses. The presence of imidazole as ionic section tags with hydrophilic character on the Co-complex supported on magnetic nanoparticles provides dispersion of the catalyst particles in water, which leads to both higher catalytic performance and also facile catalyst recovery and reuse six times by successive extraction and final magnetic separation. High catalytic activity was found for the catalyst and high to excellent efficiency was obtained for all Suzuki (80-98% yield; E factor: 1.1-1.9) and Hiyama (87-98% yield; E factor: 0.26-1.1) derivatives in short reaction times under mild reaction conditions in the absence of any hazardous or expensive materials. There is not any noticeable by-product found whether for Suzuki or Hiyama derivatives, which reflects the high selectivity and also the lower the E factor the more favorable is the process in view of green chemistry. The bi-aryls were achieved from the reaction of various aryl iodides/bromides and even chlorides as the highly challenging substrates, which are more available and cheaper, with triethoxyphenylsilane or phenylboronic acid. To prove the performance of the catalyst components (synergistic of SBL ∼ Co. and IL), its different homologs were incorporated individually and studied for a model reaction. Exclusively, this is an introductory statement on the use of Cobalt binuclear symmetric ionic liquid catalysts in Hiyama reactions.

Aminations and arylations by direct C-O activation for the design of 7,8-dihydro-6H-5,8-ethanopyrido[3,2-d]pyrimidines

The design of some novel disubstituted 7,8-dihydro-6H-5,8-ethanopyrido[3,2-d]pyrimidine derivatives is reported. The series was developed from quinuclidinone, which afforded versatile platforms bearing one lactam function in position C-2 that were then used to create C-N or C-C bonds for S N Ar or palladium-catalyzed cross-coupling reactions by in situ C-O activation. The reaction conditions were optimized under microwave irradiation, and a wide range of amines or boronic acids were used to determine the scope and limitations of each method. To complete this study, the X-ray crystallographic data of 7,8-dihydro-6H-5,8-ethanopyrido[3,2-d]pyrimidine derivative 49 were used to formally establish the structures of the products.

Functional Pyrazolo[1,5-a]pyrimidines: Current Approaches in Synthetic Transformations and Uses As an Antitumor Scaffold

Pyrazolo[1,5-a]pyrimidine (PP) derivatives are an enormous family of N-heterocyclic compounds that possess a high impact in medicinal chemistry and have attracted a great deal of attention in material science recently due to their significant photophysical properties. Consequently, various researchers have developed different synthesis pathways for the preparation and post-functionalization of this functional scaffold. These transformations improve the structural diversity and allow a synergic effect between new synthetic routes and the possible applications of these compounds. This contribution focuses on an overview of the current advances (2015-2021) in the synthesis and functionalization of diverse pyrazolo[1,5-a]pyrimidines. Moreover, the discussion highlights their anticancer potential and enzymatic inhibitory activity, which hopefully could lead to new rational and efficient designs of drugs bearing the pyrazolo[1,5-a]pyrimidine core.