Cascade polymerizations: recent developments in the formation of polymer repeat units by cascade reactions

Rising Opportunities in Catalytic Dehydrogenative Polymerization

This article gives a perspective on various types of catalytic dehydrogenative polymerization reactions (including organic and main group polymers) while introducing "hydrogen-borrowing polymerization" and "acceptorless dehydrogenative polymerization" to this class. Limitations and future opportunities of each method have been discussed.

Recyclable Polythioesters and Poly(thioester-co-peptoid)s via Ring-Opening Cascade Polymerization of Amino Acid N-Carboxyanhydrides

Polythioesters (PTEs) are emerging sustainable polymers for their degradability and recyclability. However, low polymerizability of monomers and extensive side reactions often hampered the polymerization process. Moreover, copolymers containing both thioester and other types of functional groups in the backbone are highly desirable but rarely accomplished owing to several synthetic challenges. Here, we report the ring-opening cascade polymerization (ROCAP) of N-(2-(acetylthio)ethyl)-glycine N-carboxyanhydrides (TE-NCA) to afford recyclable PTEs and unprecedented poly(thioester-co-peptoid)s (P(TE-co-PP)s) in a controlled manner. By developing appropriated carboxylic acid-tertiary amine dual catalysts, intramolecular S-to-N acyl shift is coupled into the ROCAP process of TE-NCA to yield products with dispersity below 1.10, molecular weight (Mn) up to 84.5 kDa, and precisely controlled ratio of thioester to peptoids. Random copolymerization of sarcosine NCA (Sar-NCA) and TE-NCA gives thioester-embedded polysarcosine with facile backbone degradation while maintaining the water solubility. This work represents a paradigm shift for the ROP of NCAs, enriches the realm of cascade polymerizations, and provides a powerful synthetic approach to functional PTEs and P(TE-co-PP)s that are otherwise difficult or impossible to make.

Fast and Selective Main-Chain Scission of Vinyl Polymers Using the Domino Reaction in the Alternating Sequence for Transesterification

This communication reports on vinyl polymers capable of selective and fast main-chain scission (MCS). The trick is the domino reaction in an alternating sequence of methyl 2-(trimethylsiloxymethyl)acrylate and 5,6-benzo-2-methylene-1,3-dioxepane, a cyclic ketene acetal for radical ring-opening polymerization. Removal of the trimethylsilyl group using Bu4N+·F- readily led to MCS via irreversible transesterification of the ester backbone, affording a five-membered lactone fragment. The molar mass decreased drastically within 5 min, and no side reactions were observed. Control experiments suggest that the formation of a five-membered ring via a domino reaction is critical for fast and selective MCS. The terpolymers with methyl methacrylate and styrene also exhibited a large decrease in molar mass within 5 min. In addition, MCS was also observed for the heterogeneous reaction system in acidic aqueous media; treatment of the binary copolymer in a 50 wt % acetic acid solution resulted in a significant decrease in molar mass after 30 min. These results suggest efficient construction of degradable sites using a binary monomer system corresponding to the pendant trigger and ester backbone. Because this molecular design using a binary monomer system provides selective and fast MCS for terpolymers containing other vinyl monomers, it can provide various degradable vinyl polymers.

Designing Degradable Polymers from Tricycloalkenes via Complete Cascade Metathesis Polymerization

Cascade metathesis polymerization has been developed as a promising method to synthesize complex but well-defined polymers from monomers containing multiple reactive functional groups. However, this approach has been limited to the monomers involving simple alkene/alkyne moieties or produced mainly non-degradable polymers. In this study, we demonstrate a complete cascade ring-opening/ring-closing metathesis polymerization (RORCMP) using various tricycloalkenes and two strategies for the efficient degradation. Through rational design of tricycloalkene monomers, the structure and reactivity relationship was explored. For example, tricycloalkenes with trans configuration in the central ring enabled faster and better selective cascade RORCMP than the corresponding cis isomers. Also, a 4-substituted cyclopentene moiety in the monomers significantly enhanced the overall cascade RORCMP performance, with the maximum turnover number (TON) reaching almost 10,000 and molecular weight up to 170 kg/mol using an amide-containing monomer. Furthermore, we achieved one-shot cascade multiple olefin metathesis polymerization using tricycloalkenes and a diacrylate, to produce new highly A,B-alternating copolymers with full degradability. Lastly, we successfully designed xylose-based tricycloalkenes to give well-defined polymers that underwent ultra-fast and complete degradation under mild conditions.

Controlled Ring-Opening Polymerization of Macrocyclic Monomers Based on Ring-Opening/Ring-Closing Cascade Reaction

The development of a controlled ring-opening polymerization (ROP) method for synthesizing backbone-functionalized and sequence-controlled polymers with well-defined architectures from macrocyclic monomers is highly desirable in polymer chemistry. Herein, we developed a novel general controlled ROP of macrocycles for producing backbone functional and sequence-controlled polyurethanes and polyamides with controlled molecular weights and narrow dispersities (Đ < 1.1). The key to this method is the introduction of a trimethyl lock unit, an efficient cyclization-based self-immolative spacer, into the macrocyclic monomer ring as a "ring-opening trigger." ROP is initiated by the attack of a primary amine nucleophile on the ring-activated carbonate/ester group, leading to the ring opening of the macrocyclic monomer. Subsequently, spontaneous 6-exo-trig cyclization of the trimethyl lock unit occurs, detaching this ring-opening trigger and regenerating the primary amine end group. The regenerated primary amine group can then be used to propagate the polymer chain by iterating the ring-opening-ring-closing cascade reaction. The versatile ROP method can be applied in the synthesis of water-soluble polyurethanes, backbone-degradable polyurethanes and poly(ester amide)s, and sequence-controlled poly(amino acid)s with well-defined macromolecular architectures.

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 μg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

A Strategy for Controlling the Polymerizations of Thiyl Radical Propagation by RAFT Agents

The ability to extend the polymerizations of thiyl radical propagation to be regulated by existing controlled methods would be highly desirable, yet remained very challenging to achieve because the thiyl radicals still cannot be reversibly controlled by these methods. In this article, we reported a novel strategy that could enable the radical ring-opening polymerization of macrocyclic allylic sulfides, wherein propagating specie is thiyl radical, to be controlled by reversible addition-fragmentation chain transfer (RAFT) agents. The key to the success of this strategy is the propagating thiyl radical can undergo desulfurization with isocyanide and generate a stabilized alkyl radical for reversible control. Systematic optimization of the reaction conditions allowed good control over the polymerization, leading to the formation of polymers with well-defined architectures, exemplified by the radical block copolymerization of macrocyclic allylic sulfides and vinyl monomers and the incorporation of sequence-defined segments into the polymer backbone. This work represents a significant step toward directly enabling the polymerizations of heteroatom-centered radical propagation to be regulated by existing reversible-deactivation radical polymerization techniques.

Living Cationic Ring-Opening Polymerization of Hetero Diels-Alder Adducts to Give Multifactor-Controlled and Fast-Photodegradable Vinyl Polymers

Precise control of multiple structural parameters associated with vinyl polymers is important for producing materials with the desired properties and functions. While the development of living polymerization methods has provided a way to control the various structural parameters of vinyl polymers, the concomitant control of their sequence and regioregularity remains a challenging task. To overcome this challenge, herein, we report the living cationic ring-opening polymerization of hetero Diels-Alder adducts. The scalable and modular synthesis of the cyclic monomers was achieved by a one-step protocol using readily available vinyl precursors. Subsequently, living polymerization of the cyclic monomers was examined, allowing the synthesis of vinyl polymers while controlling multiple factors, including molecular weight, dispersity, alternating sequence, head-to-head regioregularity, and end-group functionality. The living characteristics of the developed method were further demonstrated by block copolymerization. The synthesized vinyl polymers exhibited unique thermal properties and underwent fast photodegradation even under sunlight.

Practical Route for Catalytic Ring-Opening Metathesis Polymerization

Norbornene derivatives are typical monomers for ring-opening metathesis polymerization (ROMP) for synthesizing highly functional polymers. However, the lack of catalytic methods, that is, the lack of readily available chain transfer agents (CTAs) for these monomers has been a significant cost limitation when large-scale syntheses are required. Here, we report commercially available styrene and its derivatives as efficient regioselective CTAs for the catalytic synthesis of metathesis polymers requiring up to 1000 times less ruthenium than in classical ROMP experiments. The molecular weight of the synthesized polymers was controlled by the monomer-to-CTA ratio. Low molecular weight ROMP polymers known for their antimicrobial properties were also synthesized on a gram scale in this report. Polymers were characterized by SEC, ¹H NMR spectroscopy, and isotopically resolved MALDI-TOF MS. This approach describes a greener, more cost-effective, and eco-friendly methodology for the preparation of metathesis-based materials on the multigram scale.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3-iPr-PNRP Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism

The dehydropolymerization of H₃B·NMeH₂ to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir(ⁱPr-PN^HP)} fragment [ⁱPr-PN^HP = κ³-(CH₂CH₂PⁱPr₂)₂NH] is reported. Neutral Ir(ⁱPr-PN^HP)H₃ or Ir(ⁱPr-PN^HP)H₂Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F₂C₆H₄ solution. In contrast, addition of [NMeH₃][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃) to Ir(ⁱPr-PN^HP)H₃ immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M_n ∼ 40,000 g/mol, Đ ∼1.5, i.e., dihydrogen/dihydride, [Ir(ⁱPr-PN^HP)(H)₂(H₂)][BAr^F₄]; σ-amine-borane [Ir(ⁱPr-PN^HP)(H)₂(H₃B·NMe₃)][BAr^F₄]; and [Ir(ⁱPr-PN^HP)(H)₂(NMeH₂)][BAr^F₄]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal–ligand cooperativity, and this is supported experimentally by N–Me substituted [Ir(ⁱPr-PN^MeP)(H)₂(H₃B·NMe₃)][BAr^F₄] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H₃B·NMeH₂ with the N–H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir(ⁱPr-N^HP)(H)₂(H₂)][BAr^F₄], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH₂ (via B–N bond cleavage), results in the formation of essentially inactive Ir(ⁱPr-PN^HP)H₃, with a coproduct of [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺. While reprotonation of Ir(ⁱPr-PN^HP)H₃ results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺/catalyst in insoluble polyaminoborane. The role of [NMeH₃]⁺/[H₂B(NMeH₂)]⁺ as chain control agents is also noted.

Controlled Living Cascade Polymerization of Polycyclic Enyne Monomers: Leveraging Complete Degradability for a Stereochemical and Structural Investigation

Cascade polymerizations recently gained significant attention due to their use of unique transformations, involving multiple bond making and/or breaking steps, when converting monomers to repeat units. However, designing complex cascade polymerizations which proceed in a controlled manner is very challenging. Various side reactions can hamper polymerization performance and the efficiency of the cascade. In this work, we explore a metathesis-based cascade polymerization of unique polycyclic enyne monomers, which contain a terminal alkyne and two cyclic alkenes. By modifying the monomer's stereochemistry, linkers, and ring types, we were able to modulate the polymerization performance and the extent to which a complete cascade reaction occurs. Upon subjecting the resulting polymers to mild acidic conditions and analyzing the degradation products, we were able to calculate the percentage of repeat units derived from a complete cascade reaction (termed the cascade efficiency). In addition to identifying how various structural parameters in the monomer influence the success of a cascade polymerization, we were able to achieve controlled living cascade polymerizations of multiple monomers with >99% cascade efficiency and produce various block copolymers.

Closing the "One Monomer-Two Polymers-One Monomer" Loop via Orthogonal (De)polymerization of a Lactone/Olefin Hybrid

Two well-known low-ceiling-temperature (LCT) monomers, γ-butyrolactone (γ-BL) toward ring-opening polymerization (ROP) to polyester and cyclohexene toward ring-opening metathesis polymerization (ROMP) to poly(cyclic olefin), are notoriously "nonpolymerizable". Here we present a strategy to render not only polymerizability of both the γ-BL and cyclohexene sites, orthogonally, but also complete and orthogonal depolymerization, through creating an LCT/LCT hybrid, bicyclic lactone/olefin (BiL⁼). This hybrid monomer undergoes orthogonal polymerization between ROP and ROMP, depending on the catalyst employed, affording two totally different classes of polymeric materials from this single monomer: polyester P(BiL⁼)_ROP via ROP and functionalized poly(cyclic olefin) P(BiL⁼)_ROMP via ROMP. Intriguingly, both P(BiL⁼)_ROP and P(BiL⁼)_ROMP are thermally robust but chemically recyclable under mild conditions (25-40 °C), in the presence of a catalyst, to recover cleanly the same monomer via chain unzipping and scission, respectively. In the ROP, topological and stereochemical controls have been achieved and the structures characterized. Furthermore, the intact functional group during the orthogonal polymerization (i.e., the double bond in ROP and the lactone in ROMP) is utilized for postfunctionalization for tuning materials' thermal and mechanical performances. The impressive depolymerization orthogonality further endows selective depolymerization of both the ROP/ROMP copolymer and the physical blend composites into the same starting monomer.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ³-(ⁱPr₂PCH₂CH₂)₂NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H₂BNMeH)_n, by dehydropolymerization of H₃B·NMeH₂. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H₃ (3), forms, which sits as an outer-sphere adduct 3·H₃BNMeH₂ as the resting state. At the end of catalysis, dormant Rh(L)H₂Cl (2) is formed. Reaction of 2 with H₃B·NMeH₂ returns 3, alongside the proposed formation of boronium [H₂B(NMeH₂)₂]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H₂B═NMeH (ΔG^‡_calc = 19.6 kcal mol^-1). H₂B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (M_n ∼71 000 g mol^-1; Đ, of ∼ 1.6). The molecular weight can be controlled using [H₂B(NMe₂H)₂]Cl as a chain transfer agent, M_n = 37 900-78 100 g mol^-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H₃B·NMeH₂. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Degradable Vinyl Random Copolymers via Photocontrolled Radical Ring-Opening Cascade Copolymerization

Degradable vinyl polymers by radical ring-opening polymerization are promising solutions to the challenges caused by non-degradable vinyl plastics. However, achieving even distributions of labile functional groups in the backbone of degradable vinyl polymers remains challenging. Herein, we report a photocatalytic approach to degradable vinyl random copolymers via radical ring-opening cascade copolymerization (rROCCP). The rROCCP of macrocyclic allylic sulfones and acrylates or acrylamides mediated by visible light at ambient temperature achieved near-unity comonomer reactivity ratios over the entire range of the feed compositions. Experimental and computational evidence revealed an unusual reversible inhibition of chain propagation by in situ generated sulfur dioxide (SO2), which was successfully overcome by reducing the solubility of SO2. This study provides a powerful approach to degradable vinyl random copolymers with comparable material properties to non-degradable vinyl polymers.

Access to Highly Stereodefined 1,4-cis-Polydienes by a [Ni/Mg] Orthogonal Tandem Catalytic Polymerization

A [Ni/Mg]-catalyzed orthogonal tandem polymerization has been developed starting from enol phosphates. Initial investigations conducted on branched 1,3-dienes as monomers enabled identification of a Mg-initiated polymerization process leading to 1,4-cis-polydienes. When aryl enol phosphates are used as monomers, the [Ni/Mg]-catalyzed tandem polymerization affords 1,4-cis-polydienes with selectivities up to 99%. Elastomeric or crystalline materials were obtained by simple structural modifications of the monomeric unit. This tandem approach appears as a straightforward and efficient way to enforce diversity and selectivity in diene polymerization while retaining a fair degree of control, just as observed for stepwise systems that are accessible through established time- and manpower-consuming synthetic procedures.

Recent progress in the construction of polymers with advanced chain structures via hybrid, switchable, and cascade chain-growth polymerizations

Recent progress of hybrid, switchable, and cascade chain-growth polymerizations for the preparation of polymers with advanced chain structures with diverse compositions has been summarized.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

Multicomponent Polymerization for π-Conjugated Polymers

Structurally complex π-conjugated polymers hold great promise as key components in sensor and electronic devices; however, their syntheses have not been a trivial task. From a synthetic efficiency perspective, it would be more attractive to access these materials using convenient and efficient methods from simple building blocks. One such synthetic tool, multicomponent polymerization, can accommodate modularity and provide highly efficient syntheses. This feature article outlines several multicomponent polymerization strategies for the synthesis of various π-conjugated polymers, which are classified based upon how the monomers are aligned during polymerization. Additionally, the challenges and outlooks of this field are highlighted and discussed.

Sugar-Based Polymers from d-Xylose: Living Cascade Polymerization, Tunable Degradation, and Small Molecule Release

Enyne monomers derived from D-xylose underwent living cascade polymerizations to prepare new polymers with a ring-opened sugar and degradable linkage incorporated into every repeat unit of the backbone. Polymerizations were well-controlled and had living character, which enabled the preparation of high molecular weight polymers with narrow molecular weight dispersity values and a block copolymer. By tuning the type of acid-sensitive linkage (hemi-aminal ether, acetal, or ether functional groups), we could change the degradation profile of the polymer and the identity of the resulting degradation products. For instance, the large difference in degradation rates between hemi-aminal ether and ether-based polymers enabled the sequential degradation of a block copolymer. Furthermore, we exploited the generation of furan-based degradation products, from an acetal-based polymer, to achieve the release of covalently bound reporter molecules upon degradation.