A cofacial metal-organic framework based photocathode for carbon dioxide reduction

Metal-organic frameworks (MOFs) for photoelectrocatalytic (PEC) reducing carbon dioxide (CO2) to hydrocarbon fuels

MOF-based photoelectrocatalysis (PEC) using CO2 as an electron donor offers a green, clean, and extensible way to make hydrocarbon fuels under more tolerant conditions. Herein, basic principles of PEC reduction of CO2 and the preparation methods and characterization techniques of MOF-based materials are summarized. Furthermore, three applications of MOFs for improving the photoelectrocatalytic performance of CO2 reduction are described: (i) as photoelectrode alone; (ii) as a co-catalyst of semiconductor photoelectrode or as a substrate for loading dyes, quantum dots, and other co-catalysts; (iii) as one of the components of heterojunction structure. Challenges and future wave surrounding the development of robust PEC CO2 systems based on MOF materials are also discussed briefly.

Electron density effect of aromatic carboxylic acids in naphthalenediimide-based coordination polymers: from thermal electron transfer and charge transfer to photoinduced electron transfer

Various naphthalenediimide (NDI) based electron donor-acceptor coordination polymers (D-A CPs) have been constructed and used to explore charge transfer (CT) and electron transfer (ET) behaviors. Up to now, significant progress has been made in the interface contact and electron donor-acceptor ability matching mechanism, while the electronic density effect of the electron donors on the CT and ET behaviors is still not known. Herein, two NDI-based D-A CPs, [Cd2(H2NDI)(IPA)2(H2O)2] (1) and [Cd2(H2NDI)(IPA-OH)2(H2O)2] (2), are constructed using an NDI-based ligand and two aromatic carboxylic acid ligands (H2NDI = 2,7-bis(3,5-dimethyl) dipyrazol-1,4,5,8-naphthalene tetracarboxydiimide, H2IPA = isophthalic acid; and H2IPA-OH = 5-hydroxyisophthalic acid). UV-vis and EPR spectroscopy and DFT calculations analyses reveal that the occurrence of themal electron transfer (TET) in 1 and 2 results from the HOMO of the IPA and IPA-OH lying higher than the LUMO of the NDI. Meanwhile, compared to 1, the UV-vis absorption spectrum of 2 exhibits a significant red shift, which suggests higher electron density of the donor and more electron transfer pathways are beneficial for the occurrence of intermolecular CT. After UV light irradiation, the comparison of the photochromic behavior of 1 and 2 confirms the negative effect of the stronger CT on photoinduced electron transfer (PET). The present study illustrates the delicate modulating effect of electron density on the CT and ET behaviors in D-A CPs.

Enhanced Organic Electrochemical Transistor Performance of Donor-Acceptor Conjugated Polymers Modified with Hybrid Glycol/Ionic Side Chains by Postpolymerization Modification

Emergent bioelectronic technologies are underpinned by the organic electrochemical transistor (OECT), which employs an electrolyte medium to modulate the conductivity of its organic semiconductor channel. Here we utilize postpolymerization modification (PPM) on a conjugated polymer backbone to directly introduce glycolated or anionic side chains via fluoride displacement. The resulting polymers demonstrated increased volumetric capacitances, with subdued swelling, compared to their parent polymer in p-type enhancement mode OECTs. This increase in capacitance was attributed to their modified side chain configurations enabling cationic charge compensation for thin film electrochemical oxidation, as deduced from electrochemical quartz crystal microbalance measurements. An overall improvement in OECT performance was recorded for the hybrid glycol/ionic polymer compared to the parent, owing to its low swelling and bimodal crystalline orientation as imaged by grazing-incidence wide-angle X-ray scattering, enabling its high charge mobility at 1.02 cm²·V^-1·s^-1. Compromised device performance was recorded for the fully glycolated derivative compared to the parent, which was linked to its limited face-on stacking, which hindered OECT charge mobility at 0.26 cm²·V^-1·s^-1, despite its high capacitance. These results highlight the effectiveness of anionic side chain attachment by PPM as a means of increasing the volumetric capacitance of p-type conjugated polymers for OECTs, while retaining solid-state macromolecular properties that facilitate hole transport.

π-Stacks of radical-anionic naphthalenediimides in a metal-organic framework

Radical-ionic metal-organic frameworks (MOFs) have unique optical, magnetic, and electronic properties. These radical ions, forcibly formed by external stimulus-induced redox processes, are structurally unstable and have short radical lifetimes. Here, we report two naphthalenediimide-based (NDI-based) Ca-MOFs: DGIST-6 and DGIST-7. Neutral DGIST-6, which is generated first during solvothermal synthesis, decomposes and is converted into radical-anionic DGIST-7. Cofacial (NDI)₂^•- and (NDI)₂^2- dimers are effectively stabilized in DGIST-7 by electron delocalization and spin-pairing as well as dimethylammonium counter cations in their pores. Single-crystal x-ray diffractometry was used to visualize redox-associated structural transformations, such as changes in centroid-to-centroid distance. Moreover, the unusual rapid reduction of oxidized DGIST-7 into the radical anion upon infrared irradiation results in effective and reproducible photothermal conversion. This study successfully illustrated the strategic use of in situ prepared cofacial ligand dimers in MOFs that facilitate the stabilization of radical ions.

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Inspired by natural photosynthesis, harnessing the wide range of natural solar energy and utilizing appropriate semiconductor-based catalysts to convert carbon dioxide into beneficial energy species, for example, CO, CH₄ , HCOOH, and CH₃ COH have been shown to be a sustainable and more environmentally friendly approach. Graphitic carbon nitride (g-C₃ N₄ ) has been regarded as a highly effective photocatalyst for the CO₂ reduction reaction, owing to its cost-effectiveness, high thermal and chemical stability, visible light absorption capability, and low toxicity. However, weaker electrical conductivity, fast recombination rate, smaller visible light absorption window, and reduced surface area make this catalytic material unsuitable for commercial photocatalytic applications. Therefore, certain procedures, including elemental doping, structural modulation, functional group adjustment of g-C₃ N₄ , the addition of metal complex motif, and others, may be used to improve its photocatalytic activity towards effective CO₂ reduction. This review has investigated the scientific community's perspectives on synthetic pathways and material optimization approaches used to increase the selectivity and efficiency of the g-C₃ N₄ -based hybrid structures, as well as their benefits and drawbacks on photocatalytic CO₂ reduction. Finally, the review concludes a comparative discussion and presents a promising picture of the future scope of the improvements.

Squarephaneic Tetraanhydride: A Conjugated Square-Shaped Cyclophane for the Synthesis of Porous Organic Materials

Aromatic carboxylic anhydrides are ubiquitous building blocks in organic materials chemistry and have received considerable attention in the synthesis of organic semiconductors, pigments, and battery electrode materials. Here we extend the family of aromatic carboxylic anhydrides with a unique new member, a conjugated cyclophane with four anhydride groups. The cyclophane is obtained in a three-step synthesis and can be functionalised efficiently, as shown by the conversion into tetraimides and an octacarboxylate. Crystal structures reveal the high degree of porosity achievable with the new building block. Excellent electrochemical properties and reversible reduction to the tetraanions are shown for the imides; NMR and EPR measurements confirm the global aromaticity of the dianions and evidence the global Baird aromaticity of the tetraanions. Considering the short synthesis and unique properties, we expect widespread use of the new building block in the development of organic materials.

Squarephaneic Tetraanhydride: A Conjugated Square-Shaped Cyclophane for the Synthesis of Porous Organic Materials

Aromatic carboxylic anhydrides are ubiquitous building blocks in organic materials chemistry and have received considerable attention in the synthesis of organic semiconductors, pigments, and battery electrode materials. Here we extend the family of aromatic carboxylic anhydrides with a unique new member, a conjugated cyclophane with four anhydride groups. The cyclophane is obtained in a three-step synthesis and can be functionalised efficiently, as shown by the conversion into tetraimides and an octacarboxylate. Crystal structures reveal the high degree of porosity achievable with the new building block. Excellent electrochemical properties and reversible reduction to the tetraanions are shown for the imides; NMR and EPR measurements confirm the global aromaticity of the dianions and evidence the global Baird aromaticity of the tetraanions. Considering the short synthesis and unique properties, we expect widespread use of the new building block in the development of organic materials.

Solvent-Modulated Self-Assembly of Naphthalenediimide-Based Cd(II) Complexes and the Controllable Photochromism via Conformational Isomerization

Rational regulation of the properties of photochromic materials is a challenging and meaningful work. In the present work, NDI-based complexes, namely, [Cd_0.5(NDI)(HBDC)]·H₂O (1) and a series of conformational isomers of {[Cd(NDI)_0.5(BDC)]·MeCN}_n (2), were synthesized by varying the solvent conditions (H₂BDC = terephthalic acid, NDI = N,N'-bis(3-pyridylcarbonylhydrazine)-1,4,5,8-naphthalene diimide). Complex 1 exhibits a 0D mononuclear structure without photochromic behavior due to the bad conjugation of the naphthalene diimide moiety. The conformational isomers of complex 2 manifest a 3D network, showing ultra-fast photo-induced intermolecular electron transfer photochromic behavior under X-ray, UV, and visible light. However, they show different photochromic rates and coloring contrast upon photoirradiation, which originates from their difference in the distances of lone pair(COO)···π(NDI). This was realized via controlling the solvent ratio in the reaction system. In addition, compared to UV/X-ray light, 2 exhibits greater sensitivity to visible light and is an organic-inorganic hybrid material with photomodulated luminescence. Based on the excellent performance, complex 2 can be applied to filter paper, showing potential applications as an inkless printing medium and selective perception of ammonia and amine vapors in the solid state via different visual color changes.

Polymer Photoelectrodes for Solar Fuel Production: Progress and Challenges

Converting solar energy to fuels has attracted substantial interest over the past decades because it has the potential to sustainably meet the increasing global energy demand. However, achieving this potential requires significant technological advances. Polymer photoelectrodes are composed of earth-abundant elements, e.g. carbon, nitrogen, oxygen, hydrogen, which promise to be more economically sustainable than their inorganic counterparts. Furthermore, the electronic structure of polymer photoelectrodes can be more easily tuned to fit the solar spectrum than inorganic counterparts, promising a feasible practical application. As a fast-moving area, in particular, over the past ten years, we have witnessed an explosion of reports on polymer materials, including photoelectrodes, cocatalysts, device architectures, and fundamental understanding experimentally and theoretically, all of which have been detailed in this review. Furthermore, the prospects of this field are discussed to highlight the future development of polymer photoelectrodes.

Copper(II) Frameworks with Varied Active Site Distribution for Modulating Selectivity of Carbon Dioxide Electroreduction

Metal-organic frameworks (MOFs) can be utilized as electrocatalysts for CO₂ reduction reaction (CO₂RR) due to their well dispersed metal centers. However, the influence of metal node distribution on electrochemical CO₂RR was rarely explored. Here, three Cu-MOFs with different copper(II) site distribution were employed for CO₂ electroreduction. The Cu-MOFs [Cu(L)SO₄]·H₂O (Cu1), [Cu(L)₂(H₂O)₂](CH₃COO)₂·H₂O (Cu2), and [Cu(L)₂(H₂O)₂](ClO₄)₂ (Cu3) were achieved by using the same ligand 1,3,5-tris(1-imidazolyl)benzene (L) but different Cu(II) salts. The results show that the Faraday efficiency of CO (FE_CO) for Cu1 is 4 times that of the FE_H2, while the FE_CO of Cu2 is twice that of the FE_H2. As for Cu3, there is not much difference between FE_CO and FE_H2. Such difference may arise from the distinct electrochemical active surface area and charge transfer kinetics caused by different copper site distribution. Furthermore, the different framework structures also affect the activity of the copper sites, which was supported by the theoretically calculated Gibbs free energy and electron density, contributing to the selectivity of CO₂RR. This study provides a strategy for modulating the selectivity of CO₂RR by tuning the distribution of the active centers in MOFs.

Design of a Polyoxometalate-Based Metal-Organic Framework for Photocatalytic C(sp3)-H Oxidation of Toluene

A powerful and promising route for developing novel photocatalysts for light-driven toluene oxidation in water under mild conditions is presented. Herein, a novel polyoxometalate-based metal-organic framework (POMOF), {Co₄W₂₂-DPNDI}, is prepared by incorporating the unusual Co₄-sandwiched POM anion [Co₄(μ-OH)₂(SiW₁₁O₃₉)₂]^10- ({Co₄W₂₂}) and the photoactive organic bridging link N,N'-bis(4-pyridylmethyl)naphthalene diimide (DPNDI) into a framework. {Co₄W₂₂} is a good candidate for photocatalytic water oxidation. DPNDI is easily excited to form the radical species DPNDI* in the presence of an electron donor, which is beneficial for activation of the inert O₂. Anion···π interactions and covalent bonds between {Co₄W₂₂} and DPNDI facilitate electron-hole separation and electron transfer. {Co₄W₂₂-DPNDI} displays high catalytic activity for the activation of the C(sp³)-H bond of toluene using light as a driving force and inexpensive water as an oxygen source under mild conditions. In particular, the yield and selectivity are improved by replacing oxygen with water, which may be ascribed to the release of protons during the water oxidation process that facilitate the generation of ^•OH.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

A highly stable metal–organic framework with cubane-like clusters for the selective oxidation of aryl alkenes to aldehydes or ketones

A novel MOF with cubane-like clusters was prepared based on an electron-deficient triazine derivative, and it exhibits excellent thermal and chemical stability and can be used for the selective oxidation of aryl alkenes to aldehydes or ketones in mild conditions.