Advancement of 3D biofabrication in repairing and regeneration of cartilage defects

Three-dimensional (3D) bioprinting, an additive manufacturing technology, fabricates biomimetic tissues that possess natural structure and function. It involves precise deposition of bioinks, including cells, and bioactive factors, on basis of computer-aided 3D models. Articular cartilage injuries, a common orthopedic issue. Current repair methods, for instance microfracture procedure (MF), autologous chondrocyte implantation (ACI), and osteochondral autologous transfer surgery have been applied in clinical practice. However, each procedure has inherent limitation. For instance, MF surgery associates with increased subchondral cyst formation and brittle subchondral bone. ACI procedure involves two surgeries, and associate with potential risks infection and delamination of the regenerated cartilage. In addition, chondrocyte implantation's efficacy depends on the patient's weight, joint pathology, gender-related histological changes of cartilage, and hormonal influences that affect treatment and prognosis. So far, it is a still a grand challenge for achieving a clinical satisfactory in repairing and regeneration of cartilage defects using conditional strategies. 3D biofabrication provide a potential to fabricate biomimetic articular cartilage construct that has shown promise in specific cartilage repair and regeneration of patients. This review reported the techniques of 3D bioprinting applied for cartilage repair, and analyzed their respective merits and demerits, and limitations in clinical application. A summary of commonly used bioinks has been provided, along with an outlook on the challenges and prospects faced by 3D bioprinting in the application of cartilage tissue repair. It provided an overall review of current development and promising application of 3D biofabrication technology in articular cartilage repair.

Artificial Intelligence-Driven Modeling for Hydrogel Three-Dimensional Printing: Computational and Experimental Cases of Study

Determining the values of various properties for new bio-inks for 3D printing is a very important task in the design of new materials. For this purpose, a large number of experimental works have been consulted, and a database with more than 1200 bioprinting tests has been created. These tests cover different combinations of conditions in terms of print pressure, temperature, and needle values, for example. These data are difficult to deal with in terms of determining combinations of conditions to optimize the tests and analyze new options. The best model demonstrated a specificity (Sp) of 88.4% and a sensitivity (Sn) of 86.2% in the training series while achieving an Sp of 85.9% and an Sn of 80.3% in the external validation series. This model utilizes operators based on perturbation theory to analyze the complexity of the data. For comparative purposes, neural networks have been used, and very similar results have been obtained. The developed tool could easily be applied to predict the properties of bioprinting assays in silico. These findings could significantly improve the efficiency and accuracy of predictive models in bioprinting without resorting to trial-and-error tests, thereby saving time and funds. Ultimately, this tool may help pave the way for advances in personalized medicine and tissue engineering.

Development of Mg-Alginate Based Self Disassociative Bio-Ink for Magnetic Bio-Patterning of 3D Tumor Models

Alginate forms a hydrogel via physical cross-linking with divalent cations. In literature, Ca2+ is mostly utilized due to strong interactions but additional procedures are required to disassociate Ca-alginate hydrogels. On the other hand, Mg-alginate hydrogels disassociate spontaneously, which might benefit certain applications. This study introduces Mg-alginate as the main component of a bio-ink for the first time to obtain 3D tumor models by magnetic bio-patterning technique. The bio-ink contains magnetic nanoparticles (MNPs) for magnetic manipulation, Mg-alginate hydrogel as a sacrificial material, and cells. The applicability of the methodology is tested for the formation of 3D tumor models using HeLa, SaOS-2, and SH-SY5Y cells. Long-term cultures are examined by Live/dead and MTT analysis and revealed high cell viability. Subsequently, Collagen and F-actin expressions are observed successfully in 3D tumor models. Finally, the anti-cancer drug Doxorubicin (DOX) effect is investigated on 3D tumor models, and IC50 values is calculated to assess the drug response. As a result, significantly higher drug resistance is observed for bio-patterned 3D tumor models up to tenfold compared to 2D control. Overall, Mg-alginate hydrogel is successfully used to form bio-patterned 3D tumor models, and the applicability of the model is shown effectively, especially as a drug screening platform.

Photo-responsive decellularized small intestine submucosa hydrogels

Decellularized small intestine submucosa (dSIS) is a promising biomaterial for promoting tissue regeneration. Isolated from the submucosal layer of animal jejunum, SIS is rich in extracellular matrix (ECM) proteins, including collagen, laminin, and fibronectin. Following mild decellularization, dSIS becomes an acellular matrix that supports cell adhesion, proliferation, and differentiation. Conventional dSIS matrix is usually obtained by thermal crosslinking, which yields a soft scaffold with low stability. To address these challenges, dSIS has been modified with methacrylate groups for photocrosslinking into stable hydrogels. However, dSIS has not been modified with clickable handles for orthogonal crosslinking. Here, we report the development of norbornene-modified dSIS, named dSIS-NB, via reacting amine groups of dSIS with carbic anhydride in acidic aqueous reaction conditions. Using triethylamine (TEA) as a mild base catalyst, we obtained high degrees of NB substitution on dSIS. In addition to describing the synthesis of dSIS-NB, we explored its adaptability in orthogonal hydrogel crosslinking and used dSIS-NB hydrogels for cancer and vascular tissue engineering. Impressively, compared with physically crosslinked dSIS and collagen matrices, orthogonally crosslinked dSIS-NB hydrogels supported rapid dissemination of cancer cells and superior vasculogenic and angiogenic properties. dSIS-NB was also exploited as a versatile bioink for 3D bioprinting applications.

Challenges and opportunities in bioprocessing of gellan gum: A review

Gellan gum (GG) - the microbial exopolysaccharide is increasingly being adopted into drug development, tissue engineering, and food and pharmaceutical products. In spite of the commercial importance and expanding application horizon of GG, little attention has been directed toward the exploration of novel microbial cultures, development of advanced screening protocols, strain engineering, and robust upstream or downstream processes. This comprehensive review not only attempts to summarize the existing knowledge pool on GG bioprocess but also critically assesses their inherent challenges. The process optimization design augmented with advanced machine learning modeling tools, widely adopted in other microbial bioprocesses, should be extended to GG. The unification of mechanistic insight into data-driven modeling would help to formulate optimal feeding and process control strategies.

Bioinks for bioprinting using plant-derived biomaterials

Three-dimensional (3D) bioprinting has revolutionized tissue engineering by enabling the fabrication of complex and functional human tissues and organs. An essential component of successful 3D bioprinting is the selection of an appropriate bioink capable of supporting cell proliferation and viability. Plant-derived biomaterials, because of their abundance, biocompatibility, and tunable properties, hold promise as bioink sources, thus offering advantages over animal-derived biomaterials, which carry immunogenic concerns. This comprehensive review explores and analyzes the potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues. Modification and optimization of these materials to enhance printability and biological functionality are discussed. Furthermore, cancer research and drug testing applications of the use of plant-based biomaterials in bioprinting various human tissues such as bone, cartilage, skin, and vascular tissues are described. Challenges and limitations, including mechanical integrity, cell viability, resolution, and regulatory concerns, along with potential strategies to overcome them, are discussed. Additionally, this review provides insights into the potential use of plant-based decellularized ECM (dECM) as bioinks, future prospects, and emerging trends in the use of plant-derived biomaterials for 3D bioprinting applications. The potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues is highlighted herein. However, further research is necessary to optimize their processing, standardize their properties, and evaluate their long-termin vivoperformance. Continued advancements in plant-derived biomaterials have the potential to revolutionize tissue engineering and facilitate the development of functional and regenerative therapies for diverse clinical applications.

Scaffolding fundamentals and recent advances in sustainable scaffolding techniques for cultured meat development

In cultured meat (CM) production, Scaffolding plays an important role by aiding cell adhesion, growth, differentiation, and alignment. The existence of fibrous microstructure in connective and muscle tissues has attracted considerable interest in the realm of tissue engineering and triggered the interest of researchers to implement scaffolding techniques. A wide array of research efforts is ongoing in scaffolding technologies for achieving the real meat structure on the principality of biomedical research and to replace serum free CM production. Scaffolds made of animal-derived biomaterials are found efficient in replicating the extracellular matrix (ECM), thus focus should be paid to utilize animal byproducts for this purpose. Proper identification and utilization of plant-derived scaffolding biomaterial could be helpful to add diversified options in addition to animal derived sources and reduce in cost of CM production through scaffolds. Furthermore, techniques like electrospinning, modified electrospinning and 3D bioprinting should be focused on to create 3D porous scaffolds to mimic the ECM of the muscle tissue and form real meat-like structures. This review discusses recent advances in cutting edge scaffolding techniques and edible biomaterials related to structured CM production.

Engineering biomaterials by inkjet printing of hydrogels with functional particulates

Hydrogels with particulates, including proteins, drugs, nanoparticles, and cells, enable the development of new and innovative biomaterials. Precise control of the spatial distribution of these particulates is crucial to produce advanced biomaterials. Thus, there is a high demand for manufacturing methods for particle-laden hydrogels. In this context, 3D printing of hydrogels is emerging as a promising method to create numerous innovative biomaterials. Among the 3D printing methods, inkjet printing, so-called drop-on-demand (DOD) printing, stands out for its ability to construct biomaterials with superior spatial resolutions. However, its printing processes are still designed by trial and error due to a limited understanding of the ink behavior during the printing processes. This review discusses the current understanding of transport processes and hydrogel behaviors during inkjet printing for particulate-laden hydrogels. Specifically, we review the transport processes of water and particulates within hydrogel during ink formulation, jetting, and curing. Additionally, we examine current inkjet printing applications in fabricating engineered tissues, drug delivery devices, and advanced bioelectronics components. Finally, the challenges and opportunities for next-generation inkjet printing are also discussed.

Graphical Abstract

Hydroxyapatite/alginate/gellan gum inks with osteoconduction and osteogenic potential for bioprinting bone tissue analogues

There is a growing demand for engineered bone tissues custom-designed to match the patient-specific defect size and in vitro models for studying bone diseases and/or drug screening. Herein, we propose a bioprinted bone tissue construct using SaOs-2 cells within alginate/gellan gum/hydroxyapatite inks. Different ink formulations were developed with varying hydroxyapatite content and then evaluated for viscoelasticity, printability, biomineralization properties, post-printing viability, proliferation, metabolic activity, and osteogenic phenotype of SaOs-2-encapsulated cells. Results indicate that ink formulations exhibit non-Newtonian shear-thinning behaviour, maintaining shape integrity and structural stability post-printing. Ink mineralization rates increase with the hydroxyapatite content, rendering them suitable for bone defect strategies. Post-printed cells in the developed constructs remain live, spreading, and metabolically active but do not proliferate. Osteogenic gene and protein expression, both early and late, show upregulation at day 7 relative to day 1, followed by downregulation at day 14. Lower hydroxyapatite content inks demonstrate up to fourfold upregulation in genes and proteins at most time points. Additionally, these constructs release calcium and phosphate at levels conducive to mineralization. Overall, the tissue-engineered miniaturized constructs not only meet the criteria for early-stage bone defect/fracture regeneration but also serve as a promising platform for drug screening and evaluating potential therapeutic treatments.

Photo-/thermo-responsive bioink for improved printability in extrusion-based bioprinting

Extrusion-based bioprinting has demonstrated significant potential for manufacturing constructs, particularly for 3D cell culture. However, there is a greatly limited number of bioink candidates exploited with extrusion-based bioprinting, as they meet the opposing requirements for printability with indispensable rheological features and for biochemical functionality with desirable microenvironment. In this study, a blend of silk fibroin (SF) and iota-carrageenan (CG) was chosen as a cell-friendly printable material. The SF/CG ink exhibited suitable viscosity and shear-thinning properties, coupled with the rapid sol-gel transition of CG. By employing photo-crosslinking of SF, the printability with Pr value close to 1 and structural integrity of the 3D constructs were significantly improved within a matter of seconds. The printed constructs demonstrated a Young's modulus of approximately 250 kPa, making them suitable for keratinocyte and myoblast cell culture. Furthermore, the high cell adhesiveness and viability (maximum >98%) of the loaded cells underscored the considerable potential of this 3D culture scaffold applied for skin and muscle tissues, which can be easily manipulated using an extrusion-based bioprinter.

3D bioprinting of microorganisms: principles and applications

In recent years, the ability to create intricate, live tissues and organs has been made possible thanks to three-dimensional (3D) bioprinting. Although tissue engineering has received a lot of attention, there is growing interest in the use of 3D bioprinting for microorganisms. Microorganisms like bacteria, fungi, and algae, are essential to many industrial bioprocesses, such as bioremediation as well as the manufacture of chemicals, biomaterials, and pharmaceuticals. This review covers current developments in 3D bioprinting methods for microorganisms. We go over the bioink compositions designed to promote microbial viability and growth, taking into account factors like nutrient delivery, oxygen supply, and waste elimination. Additionally, we investigate the most important bioprinting techniques, including extrusion-based, inkjet, and laser-assisted approaches, as well as their suitability with various kinds of microorganisms. We also investigate the possible applications of 3D bioprinted microbes. These range from constructing synthetic microbial consortia for improved metabolic pathway combinations to designing spatially patterned microbial communities for enhanced bioremediation and bioprocessing. We also look at the potential for 3D bioprinting to advance microbial research, including the creation of defined microenvironments to observe microbial behavior. In conclusion, the 3D bioprinting of microorganisms marks a paradigm leap in microbial bioprocess engineering and has the potential to transform many application areas. The ability to design the spatial arrangement of various microorganisms in functional structures offers unprecedented possibilities and ultimately will drive innovation.

3D-bioprinted alginate-based bioink scaffolds with β-tricalcium phosphate for bone regeneration applications

Background/purpose

3D-printed bone tissue engineering is becoming recognized as a key approach in dentistry for creating customized bone regeneration treatments fitting patients bone defects requirements. 3D bioprinting offers an innovative method to fabricate detailed 3D structures, closely emulating the native bone micro-environment and better bone regeneration. This study aimed to develop an 3D-bioprintable scaffold using a combination of alginate and β-tricalcium phosphate (β-TCP) with the Cellink® BioX printer, aiming to advance the field of tissue engineering.

Materials and methods

The physical and biological properties of the resulting 3D-printed scaffolds were evaluated at 10 %, 12 %, and 15 % alginate combined with 10 % β-TCP. The scaffolds were characterized through printability, swelling behavior, degradability, and element analysis. The biological assessment included cell viability, alkaline phosphatase (ALP) activity.

Results

10 % alginate/β-TCP 3D printed at 25 °C scaffold demonstrated the optimal condition for printability, swelling capability, and degradability of cell growth and nutrient diffusion. Addition of β-TCP particles significantly improved the 3D printed material viscosity over only alginate (P < 0.05). 10 % alginate/β-TCP enhanced MG-63 cell's proliferation (P < 0.05) and alkaline phosphatase activity (P < 0.001).

Conclusion

This study demonstrated in vitro that 10 % alginate/β-TCP bioink characteristic for fabricating 3D acellular bioprinted scaffolds was the best approach. 10 % alginate/β-TCP bioink 3D-printed scaffold exhibited superior physical properties and promoted enhanced cell viability and alkaline phosphatase activity, showing great potential for personalized bone regeneration treatments.

Xeno-Free 3D Bioprinted Liver Model for Hepatotoxicity Assessment

Three-dimensional (3D) bioprinting is one of the most promising methodologies that are currently in development for the replacement of animal experiments. Bioprinting and most alternative technologies rely on animal-derived materials, which compromises the intent of animal welfare and results in the generation of chimeric systems of limited value. The current study therefore presents the first bioprinted liver model that is entirely void of animal-derived constituents. Initially, HuH-7 cells underwent adaptation to a chemically defined medium (CDM). The adapted cells exhibited high survival rates (85-92%) after cryopreservation in chemically defined freezing media, comparable to those preserved in standard medium (86-92%). Xeno-free bioink for 3D bioprinting yielded liver models with high relative cell viability (97-101%), akin to a Matrigel-based liver model (83-102%) after 15 days of culture. The established xeno-free model was used for toxicity testing of a marine biotoxin, okadaic acid (OA). In 2D culture, OA toxicity was virtually identical for cells cultured under standard conditions and in CDM. In the xeno-free bioprinted liver model, 3-fold higher concentrations of OA than in the respective monolayer culture were needed to induce cytotoxicity. In conclusion, this study describes for the first time the development of a xeno-free 3D bioprinted liver model and its applicability for research purposes.

The fabrication of the chitosan-based bioink for in vitro tissue repair and regeneration: A review

The repair and regeneration of the injured tissues or organs is a major challenge for biomedicine, and the emerging 3D bioprinting technology as a class of promising techniques in biomedical research for the development of tissue engineering and regenerative medicine. Chitosan-based bioinks, as the natural biomaterials, are considered as ideal materials for 3D bioprinting to design and fabricate the various scaffold due to their unique dynamic reversibility and fantastic biological properties. Our review aims to provide an overview of chitosan-based bioinks for in vitro tissue repair and regeneration, starting from modification of chitosan that affect these bioprinting processes. In addition, we summarize the advances in chitosan-based bioinks used in the various 3D printing strategies. Moreover, the biomedical applications of chitosan-based bioinks are discussed, primarily centered on regenerative medicine and tissue modeling engineering. Finally, current challenges and future opportunities in this field are discussed. The combination of chitosan-based bioinks and 3D bioprinting will hold promise for developing novel biomedical scaffolds for tissue or organ repair and regeneration.

Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels

Conductive hydrogels are highly attractive for biomedical applications due to their ability to mimic the electrophysiological environment of biological tissues. Although conducting polymer polythiophene-poly-(3,4-ethylenedioxythiophene) (PEDOT) and polystyrene sulfonate (PSS) alone exhibit high conductivity, the addition of other chemical compositions could further improve the electrical and mechanical properties of PEDOT:PSS, providing a more promising interface with biological tissues. Here we study the effects of incorporating crosslinking additives, such as glycerol and sodium trimetaphosphate (STMP), in developing interpenetrating PEDOT:PSS-based conductive hydrogels. The addition of glycerol at a low concentration maintained the PEDOT:PSS conductivity with enhanced wettability but decreased the mechanical stiffness. Increasing the concentration of STMP allowed sufficient physical crosslinking with PEDOT:PSS, resulting in improved hydrogel conductivity, wettability, and rheological properties without glycerol. The STMP-based PEDOT:PSS conductive hydrogels also exhibited shear-thinning behaviors, which are potentially favorable for extrusion-based 3D bioprinting applications. We demonstrate an interpenetrating conducting polymer hydrogel with tunable electrical and mechanical properties for cellular interactions and future tissue engineering applications.

Advances in tissue engineering of gellan gum-based hydrogels

Gellan Gum (GG) is a large, naturally occurring, linear polysaccharide with a similar structure and biological properties to the extracellular matrix. It's appropriate as a matrix material for the development of different composite materials due to its biocompatibility, biodegradability, and injectability. Hydrogels made from GG have found various applications in the field of Tissue Engineering (TE) in recent years after being mixed with a variety of other organic and inorganic components. These composites are considered multifunctional developing biomaterials because of their impressive mechanical capabilities, biocompatibility, low cytotoxicity, etc. This review focuses on the emerging advances of GG-based hydrogels in TE, providing an overview of the applications of different types of GG-based composite materials in bone TE, cartilage TE, nervous TE, retina TE, and other fields. Moreover, the investigations of GG-based hydrogels as bioink components for 3D bioprinting in TE will be elucidated. This review offers general guidance for the development of biomaterials related to GG, as well as ideas for future clinical diagnosis and treatment.

3D bioactive ionic liquid-based architectures: An anti-inflammatory approach for early-stage osteoarthritis

3D bioprinting enables the fabrication of biomimetic cell-laden constructs for cartilage regeneration, offering exclusive strategies for precise pharmacological screenings in osteoarthritis (OA). Synovial inflammation plays a crucial role in OA's early stage and progression, characterized by the increased of the synovial pro-inflammatory mediators and cytokines and chondrocyte apoptosis. Therefore, there is an urgent need to develop solutions for effectively managing the primary events associated with OA. To address these issues, a phenolic-based biocompatible ionic liquid approach, combining alginate (ALG), acemannan (ACE), and cholinium caffeate (Ch[Caffeate]), was used to produce easily printable bioinks. Through the use of this strategy 3D constructs with good printing resolution and high structural integrity were obtained. The encapsulation of chondrocytes like ATDC5 cells provided structures with good cell distribution, viability, and growth, for up to 14 days. The co-culture of the constructs with THP-1 macrophages proved their ability to block pro-inflammatory cytokines (TNF-α and IL-6) and mediators (GM-CSF), released by the cultured cells. Moreover, incorporating the biocompatible ionic liquid into the system significantly improved its bioactive performance without compromising its physicochemical features. These findings demonstrate that ALG/ACE/Ch[Caffeate] bioinks have great potential for bioengineering cartilage tissue analogs. Besides, the developed ALG/ACE/Ch[Caffeate] bioinks protected encapsulated chondrocyte-like cells from the effect of the inflammation, assessed by a co-culture system with THP-1 macrophages. These results support the increasing use of Bio-ILs in the biomedical field, particularly for developing 3D bioprinting-based constructs to manage inflammatory-based changes in OA. STATEMENT OF SIGNIFICANCE: Combining natural resources with active biocompatible ionic liquids (Bio-IL) for 3D printing is herein presented as an approach for the development of tools to manage inflammatory osteoarthritis (OA). We propose combining alginate (ALG), acemannan (ACE), and cholinium caffeate (Ch[Caffeate]), a phenolic-based Bio-IL with anti-inflammatory and antioxidant features, to produce bioinks that allow to obtain 3D constructs with good printing resolution, structural integrity, and that provide encapsulated chondrocyte-like cells good viability. The establishment of a co-culture system using the printed constructs and THP-1-activated macrophages allowed us to study the encapsulated chondrocyte-like cells behaviour within an inflammatory scenario, a typical event in early-stage OA. The obtained outcomes support the beneficial use of Bio-ILs in the biomedical field, particularly for the development of 3D bioprinting-based models that allow the monitoring of inflammatory-based events in OA.

The current state of the art in gellan-based printing inks in tissue engineering

With the advancement of enhanced fabrication technologies, specifically 3D printing, it is now possible to build artificial tissue for personalized healing. However, inks developed from polymers often fail to meet expectations in terms of mechanical strength, scaffold integrity, and the stimulation of tissue formation. Developing new printable formulations as well as adapting existing printing methods is an essential aspect of contemporary biofabrication research. In order to push the boundaries of the printability window, various strategies have been developed employing gellan gum. This has resulted in major breakthroughs in the development of 3D hydrogels scaffolds that exhibit significant resemblance to genuine tissues and enables the fabrication of more complex systems. In light of the many uses of gellan gum, the purpose of this paper is to provide a synopsis of the printable ink designs drawing attention to the various compositions and fabrication approaches that may be used for tuning the properties of 3D printed hydrogels for tissue engineering applications. The purpose of this article is to outline the development of gellan-based 3D printing inks and to encourage research by highlighting the possible applications of gellan gum.

Is 3D Printing Promising for Osteochondral Tissue Regeneration?

Osteochondral tissue regeneration is quite difficult to achieve due to the complexity of its organization. In the design of these complex multilayer structures, a fabrication method, 3D printing, started to be employed, especially by using extrusion, stereolithography and inkjet printing approaches. In this paper, the designs are discussed including biphasic, triphasic, and gradient structures which aim to mimic the cartilage and the calcified cartilage and the whole osteochondral tissue closely. In the first section of the review paper, 3D printing of hydrogels including gelatin methacryloyl (GelMa), alginate, and polyethylene glycol diacrylate (PEGDA) are discussed. However, their physical and biological properties need to be augmented, and this generally is achieved by blending the hydrogel with other, more durable, less hydrophilic, polymers. These scaffolds are very suitable to carry growth factors, such as TGF-β1, to further stimulate chondrogenesis. The bone layer is mimicked by printing calcium phosphates (CaPs) or bioactive glasses together with the hydrogels or as a component of another polymer layer. The current research findings indicate that polyester (i.e. polycaprolactone (PCL), polylactic acid (PLA) and poly(lactide-co-glycolide) (PLGA)) reinforced hydrogels may more successfully mimic the complex structure of osteochondral tissue. Moreover, more recent printing methods such as melt electrowriting (MEW), are being used to integrate polyester fibers to enhance the mechanical properties of hydrogels. Additionally, polyester scaffolds that are 3D printed without hydrogels are discussed after the hydrogel-based scaffolds. In this review paper, the relevant studies are analyzed and discussed, and future work is recommended with support of tables of designed scaffolds. The outcome of the survey of the field is that 3D printing has significant potential to contribute to osteochondral tissue repair.

Development of a bioink using exopolysaccharide from Rhizobium sp. PRIM17

Biopolymers play a significant role in tissue engineering, including in the formulation of bioinks that require careful selection of the biopolymers having properties ideal for printability and supporting biological entities such as cells. Alginate is one of the most widely explored natural biopolymers for tissue engineering applications due to its biocompatibility, cross-linking ability, hydrophilic nature, and easy incorporation with other polymers. Here, a succinoglycan-like exopolysaccharide (EPS-R17) produced by a bacterial strain Rhizobium sp. PRIM17 was incorporated with alginate for the development of a bioink. The physicochemical characterization of EPS-R17 was performed before formulating the bioink with alginate. The bioink formulation was prepared by mixing different concentrations of EPS with an alginate solution at room temperature under sterile atmosphere. The prepared bioink was characterized for rheological properties, biocompatibility, and a bioplotting experiment was also conducted to mimick the extrusion bioprinting. The EPS-R17 was composed of glucose, galactose, and rhamnose with a molecular weight of 69.98 kDa. It was thermally stable up to 260 °C and showed characteristic FT-IR peaks (1723.3 cm^-1) for succinyl groups. The EPS-R17 showed biocompatibility with keratinocytes (HaCaT), and fibroblasts (HDF) in vitro. The rheological properties of EPS-R17-alginate bioink at different combinations showed shear thinning behavior at 25 and 37 °C. Amplitude sweep measurements showed the gel-like nature of the polymer combinations in the solution system superior to alginate or EPS-R17 alone. The combination of 1 % EPS-R17 and 1.5 % alginate showed good compressive strength and swelling behavior. Extrusion bioprinting mimicked using a bioplotting experiment showed the sustained cell viability in the polymer matrix of EPS-R17-alginate bioink. The results indicate that the EPS-R17 can be used in combination with alginate for bioinks for bioprinting applications for providing physical properties and favorable bioactivities.

Nanofibrillated cellulose/gellan gum hydrogel-based bioinks for 3D bioprinting of skin cells

The development of suitable bioinks is an important research topic in the field of three-dimensional (3D) bioprinting. Herein, novel hydrogel-based bioinks composed of nanofibrillated cellulose (NFC) and gellan gum (GG) in different NFC/GG mass proportions (90:10, 80:20, 70:30, and 60:40) were developed and characterized. The increase in the content of GG, as well as its combination with NFC, enhanced their rheological properties, increasing both storage (G') and loss (G") moduli and the G' recovery capacity of the hydrogels (from 70.05 ± 3.06 % (90:10) to 82.63 ± 1.21 % (60:40)), as well as their mechanical properties, increasing the compressive stiffness and stress from 114.02 ± 10.93 Pa (90:10) to 337.16 ± 34.03 Pa (60:40) and from 18.27 ± 1.32 kPa (90:10) to 47.17 ± 3.59 kPa (60:40), respectively. The hydrogels were non-cytotoxic against human keratinocyte cells (HaCaT), with cell viabilities above 70 % for up to 72 h. The hydrogel 60:40 was loaded with HaCaT cells (3 × 10⁶ cells mL^-1) and bioprinted. The cell viability was maintained elevated until day 7 (90 ± 3 %) after bioprinting. These results highlight that the combination of these two biopolymers was a good strategy for the development of novel hydrogel-based bioinks for extrusion 3D bioprinting applications.

Tuning Shear Thinning Factors of 3D Bio-Printable Hydrogels Using Short Fiber

Among various available 3D bioprinting techniques, extrusion-based three-dimensional (3D) bioprinting allows the deposition of cell-laden bioink, ensuring predefined scaffold architecture that may offer living tissue regeneration. With a combination of unique characteristics such as biocompatibility, less cell toxicity, and high water content, natural hydrogels are a great candidate for bioink formulation for the extrusion-based 3D bioprinting process. However, due to its low mechanical integrity, hydrogel faces a common challenge in maintaining structural integrity. To tackle this challenge, the rheological properties, specifically the shear thinning behavior (reduction of viscosity with increasing the applied load/shear rate on hydrogels) of a set of hybrid hydrogels composed of cellulose-derived nanofiber (TEMPO-mediated nano-fibrillated cellulose, TO-NFC), carboxymethyl cellulose (CMC), and commonly used alginate, were explored. A total of 46 compositions were prepared using higher (0.5% and 1.0%) and lower percentages (0.005% and 0.01%) of TO-NFC, 1-4% of CMC, and 1-4% of alginate to analyze the shear thinning factors such as the values of n and K, which were determined for each composition from the flow diagram and co-related with the 3D printability. The ability to tune shear thinning factors with various ratios of a nanofiber can help achieve a 3D bio-printed scaffold with defined scaffold architecture.

Advances in Stimuli-responsive Hydrogels for Tissue Engineering and Regenerative Medicine Applications: A Review Towards Improving Structural Design for 3D Printing

The physicochemical properties of polymeric hydrogels render them attractive for the development of 3D printed prototypes for tissue engineering in regenerative medicine. Significant effort has been made to design hydrogels with desirable attributes that facilitate 3D printability. In addition, there is significant interest in exploring stimuli-responsive hydrogels to support automated 3D printing into more structurally organised prototypes such as customizable bio-scaffolds for regenerative medicine applications. Synthesizing stimuli-responsive hydrogels is dependent on the type of design and modulation of various polymeric materials to open novel opportunities for applications in biomedicine and bio-engineering. In this review, the salient advances made in the design of stimuli-responsive polymeric hydrogels for 3D printing in tissue engineering are discussed with a specific focus on the different methods of manipulation to develop 3D printed stimuli-responsive polymeric hydrogels. Polymeric functionalisation, nano-enabling and crosslinking are amongst the most common manipulative attributes that affect the assembly and structure of 3D printed bio-scaffolds and their stimuli- responsiveness. The review also provides a concise incursion into the various applications of stimuli to enhance the automated production of structurally organized 3D printed medical prototypes.

3D printing of bone and cartilage with polymer materials

Damage and degeneration to bone and articular cartilage are the leading causes of musculoskeletal disability. Commonly used clinical and surgical methods include autologous/allogeneic bone and cartilage transplantation, vascularized bone transplantation, autologous chondrocyte implantation, mosaicplasty, and joint replacement. 3D bio printing technology to construct implants by layer-by-layer printing of biological materials, living cells, and other biologically active substances in vitro, which is expected to replace the repair mentioned above methods. Researchers use cells and biomedical materials as discrete materials. 3D bio printing has largely solved the problem of insufficient organ donors with the ability to prepare different organs and tissue structures. This paper mainly discusses the application of polymer materials, bio printing cell selection, and its application in bone and cartilage repair.

Tunable and Compartmentalized Multimaterial Bioprinting for Complex Living Tissue Constructs

Recapitulating inherent heterogeneity and complex microarchitectures within confined print volumes for developing implantable constructs that could maintain their structure in vivo has remained challenging. Here, we present a combinational multimaterial and embedded bioprinting approach to fabricate complex tissue constructs that can be implanted postprinting and retain their three-dimensional (3D) shape in vivo. The microfluidics-based single nozzle printhead with computer-controlled pneumatic pressure valves enables laminar flow-based voxelation of up to seven individual bioinks with rapid switching between various bioinks that can solve alignment issues generated during switching multiple nozzles. To improve the spatial organization of various bioinks, printing fidelity with the z-direction, and printing speed, self-healing and biodegradable colloidal gels as support baths are introduced to build complex geometries. Furthermore, the colloidal gels provide suitable microenvironments like native extracellular matrices (ECMs) for achieving cell growths and fast host cell invasion via interconnected microporous networks in vitro and in vivo. Multicompartment microfibers (i.e., solid, core-shell, or donut shape), composed of two different bioink fractions with various lengths or their intravolume space filled by two, four, and six bioink fractions, are successfully printed in the ECM-like support bath. We also print various acellular complex geometries such as pyramids, spirals, and perfusable branched/linear vessels. Successful fabrication of vascularized liver and skeletal muscle tissue constructs show albumin secretion and bundled muscle mimic fibers, respectively. The interconnected microporous networks of colloidal gels result in maintaining printed complex geometries while enabling rapid cell infiltration, in vivo.

Modulation of Biofilm Mechanics by DNA Structure and Cell Type

Deoxyribonucleic acid (DNA) evolved as a tool for storing and transmitting genetic information within cells, but outside the cell, DNA can also serve as “construction material” present in microbial biofilms or various body fluids, such as cystic fibrosis, sputum, and pus. In the present work, we investigate the mechanics of biofilms formed from Pseudomonas aeruginosa Xen 5, Staphylococcus aureus Xen 30, and Candida albicans 1408 using oscillatory shear rheometry at different levels of compression and recreate these mechanics in systems of entangled DNA and cells. The results show that the compression-stiffening and shear-softening effects observed in biofilms can be reproduced in DNA networks with the addition of an appropriate number of microbial cells. Additionally, we observe that these effects are cell-type dependent. We also identify other mechanisms that may significantly impact the viscoelastic behavior of biofilms, such as the compression-stiffening effect of DNA cross-linking by bivalent cations (Mg²⁺, Ca²⁺, and Cu²⁺) and the stiffness-increasing interactions of P. aeruginosa Xen 5 biofilm with Pf1 bacteriophage produced by P. aeruginosa. This work extends the knowledge of biofilm mechanobiology and demonstrates the possibility of modifying biopolymers toward obtaining the desired biophysical properties.

Recapitulation of dynamic nanoparticle transport around tumors using a triangular multi-chamber tumor-on-a-chip

3D tumor models are emerging as valuable tools for drug screening and nanoparticle based personalized cancer treatments. The main challenges in building microfluidic chip-based 3D tumor models currently include the development of bioinks with high bioactivity and the reproduction of the key tumor extracellular matrix (ECM) with heterogeneous tumor microenvironments. In this study, we designed a triangular multi-chamber tumor-on-a-chip (TM-CTC) platform, which consisted of three circular chambers at the vertices of a triangle connected by three rectangular chambers; it significantly improved the culture efficiency of 3D tumor tissues. MCF-7 tumor cells were cultured in a 3D ECM and then dynamically perfused for 7 days of culture to obtain abundant tumor spheroids with uniform size (100 ± 4.1 μm). The biological features of the 3D tumor tissue including epithelial transformation (EMT), hypoxia and proliferation activities were reproduced in the triangular multi-chamber tumor-on-a-chip (TM-CTC) platform. The permeability results of NPs confirmed that the ECM exhibited a significant barrier effect on the transportation of NPs when compared with free drugs, indicating that the ECM barrier should be considered as one of the key factors of drug delivery carrier development. In addition, this TM-CTC model provided a suitable platform for constructing a complex heterogeneous tumor microenvironment with multiple cells (MCF-7, HUVEC and MRC-5) involved, which was beneficial for exploring the dynamic interaction between tumor cells and other cells in the tumor microenvironment. The above results suggest that this TM-CTC model can simulate the dynamic transportation of NPs around 3D tumor tissues, and thus provide a reliable platform for NP evaluation.

A Shapable Alginate Hydrogel Resolving the Conflicts between Multifunctionality and Fabrication Simplicity

Alginate is a naturally derived biocompatible polymer widely used as a drug or food adjuvant. However, its usage as a biofunctional material has been confounded by the lack of shapable strategies. In this study, we report an easily applied ionic cross-linking strategy for fabricating shapable multifunctional SA-Ca(II) hydrogels employing the process of regulated diffusion. The fabrication proceeds in neutral solutions under ambient conditions. The obtained SA-Ca(II) hydrogel presents tunable moduli ranging from 4 to 30 kPa, resembling a series of human tissues. The tunable mechanical strength provides differentiation signals for stem cell polarization. The hydrogel film can lift a weight of 10 kg. The hydrogel can be prepared into various shapes and remains stable over one year upon rinsing in deionized water, but rapidly degrades in alginate lyase solutions. Subcutaneously embedded SA-Ca(II) hydrogels in mice show high biocompatibility and degrade over 4 weeks accompanied by hair follicle regeneration. Wearable protections as well as stimuli-responsive electronic circuits are then achieved, which not only protect the model body against high-temperature environments but also show warning signals when the protection loses effectiveness because of high temperatures. Overall, these results demonstrate that our SA-Ca(II) hydrogel offers appealing comprehensive functionalities from multifaceted perspectives, including mechanical strength, economic and environmental considerations, transparency, forming capability, biocompatibility, and conductivity.

3D printed heterogeneous hybrid hydrogel scaffolds for sequential tumor photothermal-chemotherapy and wound healing

Surgical resection remains the mainstay of melanoma treatment. However, due to the difficulties in controlling tumor recurrence and wound healing simultaneously, high postoperative recurrence rates and wound reconstruction remain the most significant challenges. As a result, a heterogeneous hybrid hydrogel scaffold was designed in this work to achieve sequential photothermal therapy and chemotherapy for melanoma recurrence inhibition and wound healing. A 3D printing platform was used to create a SA-GG@PDA hybrid hydrogel scaffold, which was prepared from a hybrid bioink consisting of sodium alginate (SA), gellan gum (GG), and polydopamine nanoparticles (PDA NPs). The printability, biocompatibility, and mechanical qualities of the hybrid bioink were all satisfactory. PDA NPs were generated in situ in the hybrid bioink, providing superior photothermal effects to the scaffold. After coating with a thermosensitive gelatin hydrogel loaded with the chemotherapeutic drug doxorubicin (DOX), the heterogeneous hydrogel scaffold could accelerate drug release under photothermal triggering and achieve photothermal-chemotherapy to suppress tumor cell proliferation and recurrence after surgical resection. Subsequently, the printed porous hybrid hydrogel scaffold enhanced HUVEC proliferation and migration, as well as tissue ingrowth, promoting wound healing following surgery. In the same mouse model, the sequential treatment with the heterogeneous SA-GG@PDA + DOX hydrogel scaffold was tested. The fabrication of the heterogeneous SA-GG@PDA + DOX hydrogel scaffold with multifunctional capabilities seemed to be a potential technique for preventing tumor recurrence and promoting wound healing following surgery.

Investigation of Collagen-Incorporated Sodium Alginate Bioprinting Hydrogel for Tissue Engineering

Tissue engineering is a promising area that is aimed at tissue regeneration and wound repair. Sodium alginate (SA) has been widely used as one of the most biocompatible materials for tissue engineering. The cost-efficiency and rapid gel ability made SA attractive in would healing and regeneration area. To improve printability and elasticity, many hydrogel-based bioinks were developed by mixing SA with other natural or synthetic polymers. In this paper, composite SA/COL bioink was used for the bioprinting of artificial cartilage tissue mimicries. The results showed that the concentration of both SA and COL has significant effects on filament diameter and merging. A higher concentration of the bioink solution led to better printing fidelity and less deformation. Overall, a higher SA concentration and a lower COL concentration contributed to a lower shrinkage ratio after crosslinking. In summary, the SA/COL composite bioink has favorable rheological properties and this study provided material composition optimization for future bioprinting of engineered tissues.

Smart biomaterials: From 3D printing to 4D bioprinting

This century is blessed with enhanced medical facilities on the grounds of the development of smart biomaterials. The rise of the four-dimensional (4D) bioprinting technology is a shining example. Using inert biomaterials as the bioinks for the three-dimensional (3D) printing process, static objects that might not be able to mimic the dynamic nature of tissues would be fabricated; by contrast, 4D bioprinting can be used for the fabrication of stimuli-responsive cell-laden structures that can evolve with time and enable engineered tissues to undergo morphological changes in a pre-planned way. For all the aptitude of 4D bioprinting technology in tissue engineering, it is imperative to select suitable stimuli-responsive biomaterials with cell-supporting functionalities and responsiveness; as a result, in this article, recent advances and challenges in smart biomaterials for 4D bioprinting are briefly discussed. An overview perspective concerning the latest developments in 4D-bioprinting is also provided.

Inorganic biomaterials‐based bioinks for three‐dimensional bioprinting of regenerative scaffolds

The application of inorganic biomaterials in regenerative medicine is increasingly expanded. Taking advantages of attractive properties of the inorganic biomaterials, sorts of functional bioinks have been developed based on inorganic biomaterials and were applied to construct inorganic/organic/cell‐laden systems for tissue regeneration via 3D bioprinting technology. In this review, we aim to summarize the existing inorganic biomaterials‐based bioinks (referred to as “inorganic‐bioinks”) for 3D bioprinting regenerative scaffolds. We introduce the recently developed inorganic‐bioinks from the perspective of the function of bioinks, and especially highlight the incorporation of inorganic biomaterials improving the printability, mechanical strength, and bioactivity of the bioinks for different tissue regeneration. Subsequently, the current applications of the inorganic‐bioinks in constructing 3D cell‐laden scaffolds for tissue regeneration are presented. Finally, challenges and prospects for the inorganic biomaterials‐based bioprinting strategy are discussed.

A Guide to Polysaccharide-Based Hydrogel Bioinks for 3D Bioprinting Applications

Three-dimensional (3D) bioprinting is an innovative technology in the biomedical field, allowing the fabrication of living constructs through an approach of layer-by-layer deposition of cell-laden inks, the so-called bioinks. An ideal bioink should possess proper mechanical, rheological, chemical, and biological characteristics to ensure high cell viability and the production of tissue constructs with dimensional stability and shape fidelity. Among the several types of bioinks, hydrogels are extremely appealing as they have many similarities with the extracellular matrix, providing a highly hydrated environment for cell proliferation and tunability in terms of mechanical and rheological properties. Hydrogels derived from natural polymers, and polysaccharides, in particular, are an excellent platform to mimic the extracellular matrix, given their low cytotoxicity, high hydrophilicity, and diversity of structures. In fact, polysaccharide-based hydrogels are trendy materials for 3D bioprinting since they are abundant and combine adequate physicochemical and biomimetic features for the development of novel bioinks. Thus, this review portrays the most relevant advances in polysaccharide-based hydrogel bioinks for 3D bioprinting, focusing on the last five years, with emphasis on their properties, advantages, and limitations, considering polysaccharide families classified according to their source, namely from seaweed, higher plants, microbial, and animal (particularly crustaceans) origin.

Hybridizing gellan/alginate and thixotropic magnesium phosphate-based hydrogel scaffolds for enhanced osteochondral repair

Osteochondral defects include the damage of cartilage and subchondral bone, which are still clinical challenges. The general replacements are difficult to simultaneously repair cartilage and subchondral bone due to their various requirements. Moreover, appropriate printable bioactive materials were needed for 3D bioprinting personalized scaffolds for osteochondral repairing. Herein, the novel hydrogel was developed by hybridizing the alginate sodium (SA) and gellan gum (GG) with the inorganic thixotropic magnesium phosphate-based gel (TMP-BG) in the pre-crosslinking of Mg²⁺ to enhance osteochondral repairing. SA-GG/TMP-BG hybrid hydrogels possessed controllable rheological, injectable, mechanical properties and porosities by tuning their ratio. The shear-thinning of SA-GG/TMP-BG was responsible for its excellent injectability. SA-GG/TMP-BG hybrid hydrogels displayed good cell compatibility, on which MG-63 and BMSCs cells attached and spread well with the high proliferation and up-regulated osteogenic genes. In addition, the inorganic TMP-BG gel hybridized with SA-GG hydrogel released Mg²⁺ was conducive to recruiting BMSCs and promoting the osteogenic and chondrogenic differentiation of BMSCs. Histological results confirmed that SA-GG/TMP6040 significantly promoted the osteogenesis of subchondral bone and then further facilitated the cartilage repairing after being implanted in osteochondral defects of rabbits for 6 and 12 weeks.

Our finding revealed that the inorganic TMP-BG endowed the excellent osteogenic activity of the hybrid hydrogels, which played a key role in successful osteochondral repairing. The newly SA-GG/TMP-BG hybrid hydrogels appeared to be promising materials for osteochondral repairing and the further 3D bioprinting.

Addition of High Acyl Gellan Gum to Low Acyl Gellan Gum Enables the Blends 3D Bioprintable

Long-term stability of gellan gum (GG) at physiological conditions is expected, as very low concentration of divalent ions are required for crosslinking, as compared to alginate—which is extensively used for tissue engineering (TE) applications. Hence, GG is proposed as an ideal candidate to substitute alginate for TE. Deacylated (low acyl; LA) GG forms brittle gels, thus only low concentrations were used for cell encapsulation, whereas acylated (high acyl; HA) GG forms weak/soft gels. 3D bioprinting using pure LAGG or HAGG is not possible owing to their rheological properties. Here, we report development and characterization of bioprintable blends of LAGG and HAGG. Increase in HAGG in the blends improved shear recovery and shape fidelity of printed scaffolds. Low volumetric swelling observed in cell culture conditions over 14 days indicates stability. Volumetric scaffolds were successfully printed and their mechanical properties were determined by uniaxial compressive testing. Mesenchymal stem cells bioprinted in blends of 3% LAGG and 3% HAGG survived the printing process showing >80% viability; a gradual decrease in cell numbers was observed over 21 days of culture. However, exploiting intrinsic advantages of 3D bioprinting, LAGG/HAGG blends open up numerous possibilities to improve and/or tailor various aspects required for TE.

Physical Modification of Hybrid Hydrogels to Fabricate Full-Scale Construct Using Three-Dimensional Bio-Printing Process

Bioprinting for regenerative medicine has been gaining a lot of popularity in today's world. Despite being one of the rigorously studied fields, there are still several challenges yet to be solved. Geometric fidelity and mechanical complexities stand as roadblocks when it comes to the printability of the customized constructs. Exploring the rheological properties of the compositions helps us understand the physical and mechanical properties of the biomaterials which are closely tied to the printability of the filament and eventually, geometric fidelity of the constructs. To ensure the structural integrity of the constructs, viscosity enhancers such as carboxymethyl cellulose (CMC) and crosslinkers like CaCl₂ and CaSO₄ were used. These crosslinkers can be used before (precrosslinking) and after (postcrosslinking) the extrusion of considered compositions to investigate and compare the outcome. To do this, mixtures of CMC (viscosity enhancer), Alginate, and CaCl₂ and CaSO₄ (crosslinkers) were prepared at various concentrations maintaining minimum solid content (≤8%). Each composition was subjected to a set of rheological tests like flow curve for shear thinning behavior, three points thixotropic for recovery rate, and amplitude test for gelation point. Various geometric fidelity identification tests were conducted and correlated with their physical properties. Some compositions were used to fabricate large-scale constructs (in cm-scale) to demonstrate their capability. This research is a thorough investigation of compositions when they are introduced to crosslinkers and viscosity enhancers which can be crucial for the 3D printing world.

3D Bioprinting of Multifunctional Dynamic Nanocomposite Bioinks Incorporating Cu-Doped Mesoporous Bioactive Glass Nanoparticles for Bone Tissue Engineering

Bioprinting has seen significant progress in recent years for the fabrication of bionic tissues with high complexity. However, it remains challenging to develop cell-laden bioinks exhibiting superior physiochemical properties and bio-functionality. In this study, a multifunctional nanocomposite bioink is developed based on amine-functionalized copper (Cu)-doped mesoporous bioactive glass nanoparticles (ACuMBGNs) and a hydrogel formulation relying on dynamic covalent chemistry composed of alginate dialdehyde (oxidized alginate) and gelatin, with favorable rheological properties, improved shape fidelity, and structural stability for extrusion-based bioprinting. The reversible dynamic microenvironment in combination with the impact of cell-adhesive ligands introduced by aminated particles enables the rapid spreading (within 3 days) and high survival (>90%) of embedded human osteosarcoma cells and immortalized mouse bone marrow-derived stroma cells. Osteogenic differentiation of primary mouse bone marrow stromal stem cells (BMSCs) and angiogenesis are promoted in the bioprinted alginate dialdehyde-gelatin (ADA-GEL or AG)-ACuMBGN scaffolds without additional growth factors in vitro, which is likely due to ion stimulation from the incorporated nanoparticles and possibly due to cell mechanosensing in the dynamic matrix. In conclusion, it is envisioned that these nanocomposite bioinks can serve as promising platforms for bioprinting complex 3D matrix environments providing superior physiochemical and biological performance for bone tissue engineering.

An osteogenic bioink composed of alginate, cellulose nanofibrils, and polydopamine nanoparticles for 3D bioprinting and bone tissue engineering

Bioprinting is an emerging technology for manufacturing cell-laden three-dimensional (3D) scaffolds, which are used to fabricate complex 3D constructs and provide specific microenvironments for supporting cell growth and differentiation. The development of bioinks with appropriate printability and specific bioactivities is crucial for bioprinting and tissue engineering applications, including bone tissue regeneration. Therefore, to produce functional bioinks for osteoblast printing and bone tissue formation, we formulated various nanocomposite hydrogel-based bioinks using natural and biocompatible biomaterials (i.e., alginate, tempo-oxidized cellulose nanofibrils (TOCNF), and polydopamine nanoparticles (PDANPs)). Rheological studies and printability tests revealed that bioinks containing 1.5% alginate and 1.5% TOCNF in the presence or absence of PDANP (0.5%) are suitable for 3D printing. Furthermore, in vitro studies of 3D-printed osteoblast-laden scaffolds indicated that the 0.5% PDANP-incorporated bioink induced significant osteogenesis. Overall, the bioink consisting of alginate, TOCNF, and PDANPs exhibited excellent printability and bioactivity (i.e., osteogenesis).

3D Printing for Bone-Cartilage Interface Regeneration

Due to the vasculature defects and/or the avascular nature of cartilage, as well as the complex gradients for bone-cartilage interface regeneration and the layered zonal architecture, self-repair of cartilage and subchondral bone is challenging. Currently, the primary osteochondral defect treatment strategies, including artificial joint replacement and autologous and allogeneic bone graft, are limited by their ability to simply repair, rather than induce regeneration of tissues. Meanwhile, over the past two decades, three-dimension (3D) printing technology has achieved admirable advancements in bone and cartilage reconstruction, providing a new strategy for restoring joint function. The advantages of 3D printing hybrid materials include rapid and accurate molding, as well as personalized therapy. However, certain challenges also exist. For instance, 3D printing technology for osteochondral reconstruction must simulate the histological structure of cartilage and subchondral bone, thus, it is necessary to determine the optimal bioink concentrations to maintain mechanical strength and cell viability, while also identifying biomaterials with dual bioactivities capable of simultaneously regenerating cartilage. The study showed that the regeneration of bone-cartilage interface is crucial for the repair of osteochondral defect. In this review, we focus on the significant progress and application of 3D printing technology for bone-cartilage interface regeneration, while also expounding the potential prospects for 3D printing technology and highlighting some of the most significant challenges currently facing this field.

3D Bioprinting at the Frontier of Regenerative Medicine, Pharmaceutical, and Food Industries

3D printing technology has emerged as a key driver behind an ongoing paradigm shift in the production process of various industrial domains. The integration of 3D printing into tissue engineering, by utilizing life cells which are encapsulated in specific natural or synthetic biomaterials (e.g., hydrogels) as bioinks, is paving the way toward devising many innovating solutions for key biomedical and healthcare challenges and heralds' new frontiers in medicine, pharmaceutical, and food industries. Here, we present a synthesis of the available 3D bioprinting technology from what is found and what has been achieved in various applications and discussed the capabilities and limitations encountered in this technology.

Rheological and textural analysis as tools for investigation of drug-polymer and polymer-polymer interactions on the example of low-acyl gellan gum and mesalazine

PURPOSE

In the performed study, the rheological and textural parameters of gellan-based hydrogels were investigated and their dependence on three factors was taken into consideration: (i) The presence of the model drug, (ii) The presence and type of the ionic crosslinking agent, and (iii) the composition of the polymer network. The objective was to compare two analytical methods, regarded as complementary, and define to what extent the obtained results correlate with each other.

METHODS

The hydrogels contained low-acyl gellan gum or its mixtures with hydroxyethyl cellulose or κ-carrageenan. CaCl₂ and MgCl₂ were used as gelling agents. Mesalazine was used as a model drug. The rheological analysis included oscillatory stress and frequency sweeping. The texture profile analysis was performed to calculate texture parameters.

RESULTS

Placebo gels without the addition of gelling agents had the weakest structure. The drug had the strongest ability to increase the stiffness of the polymer network. The weakest structure revealed the placebo samples without the addition of gelling agents. Texture analysis revealed no significant influence of the drug on the strength of the gels, while rheological measurements indicated clear differences.

CONCLUSIONS

It can be concluded that in the case of some parameters methods correlate, that is, the effect related to gelling ions. However, the rheological analysis seems to be more precise and sensitive to some changes in the mechanical properties of the gels.

3D bioprinted tumor model with extracellular matrix enhanced bioinks for nanoparticle evaluation

The traditional evaluation of nanoparticles (NPs) is mainly based on 2D cell culture and animal models. However, these models are difficult to accurately represent human tumor microenvironment (TME) and fail to systematically study the complex transportation of NPs, thus limiting the translation of nano-drug formulations to clinical studies. This study reports a tumor model fabricated via 3D bioprinting with decellularized extracellular matrix (adECM) enhanced hybrid bioink. Compared with 2D cultured cells, the 3D printed tumor models with multicellular spheroids formation are closer to real tumor in protein, gene expression and tumorigenicity both in vitro and in vivo. Two characteristics of TME, ECM remodeling and epithelial-mesenchymal transition (EMT), are tracked simultaneously under 3D conditions. Furthermore, the cellular uptake efficiency of two different NPs is significantly lower in the printed 3D tumor model than the 2D individual cells, and higher drug resistance is observed in 3D group, which suggest the ECM barrier of tumor can significantly affect the permeability of NPs. These results suggest that this 3D printed tumor model is capable of mimicking the multiple TME, potentially providing a more accurate platform for the design and development of NPs before moving into animal and clinical trials.

3D Bio-Printability of Hybrid Pre-Crosslinked Hydrogels

Maintaining shape fidelity of 3D bio-printed scaffolds with soft biomaterials is an ongoing challenge. Here, a rheological investigation focusing on identifying useful physical and mechanical properties directly related to the geometric fidelity of 3D bio-printed scaffolds is presented. To ensure during- and post-printing shape fidelity of the scaffolds, various percentages of Carboxymethyl Cellulose (CMC) (viscosity enhancer) and different calcium salts (CaCl₂ and CaSO₄, physical cross-linkers) were mixed into alginate before extrusion to realize shape fidelity. The overall solid content of Alginate-Carboxymethyl Cellulose (CMC) was limited to 6%. A set of rheological tests, e.g., flow curves, amplitude tests, and three interval thixotropic tests, were performed to identify and compare the shear-thinning capacity, gelation points, and recovery rate of various compositions. The geometrical fidelity of the fabricated scaffolds was defined by printability and collapse tests. The effect of using multiple cross-linkers simultaneously was assessed. Various large-scale scaffolds were fabricated (up to 5.0 cm) using a pre-crosslinked hybrid. Scaffolds were assessed for the ability to support the growth of Escherichia coli using the Most Probable Number technique to quantify bacteria immediately after inoculation and 24 h later. This pre-crosslinking-based rheological property controlling technique can open a new avenue for 3D bio-fabrication of scaffolds, ensuring proper geometry.

Converging 2D Nanomaterials and 3D Bioprinting Technology: State-of-the-Art, Challenges, and Potential Outlook in Biomedical Applications

The development of next-generation of bioinks aims to fabricate anatomical size 3D scaffold with high printability and biocompatibility. Along with the progress in 3D bioprinting, 2D nanomaterials (2D NMs) prove to be emerging frontiers in the development of advanced materials owing to their extraordinary properties. Harnessing the properties of 2D NMs in 3D bioprinting technologies can revolutionize the development of bioinks by endowing new functionalities to the current bioinks. First the main contributions of 2D NMS in 3D bioprinting technologies are categorized here into six main classes: 1) reinforcement effect, 2) delivery of bioactive molecules, 3) improved electrical conductivity, 4) enhanced tissue formation, 5) photothermal effect, 6) and stronger antibacterial properties. Next, the recent advances in the use of each certain 2D NMs (1) graphene, 2) nanosilicate, 3) black phosphorus, 4) MXene, 5) transition metal dichalcogenides, 6) hexagonal boron nitride, and 7) metal-organic frameworks) in 3D bioprinting technology are critically summarized and evaluated thoroughly. Third, the role of physicochemical properties of 2D NMSs on their cytotoxicity is uncovered, with several representative examples of each studied 2D NMs. Finally, current challenges, opportunities, and outlook for the development of nanocomposite bioinks are discussed thoroughly.

Norbornene-functionalized methylcellulose as a thermo- and photo-responsive bioink

Three-dimensional (3D) bioprinting has emerged as an important tool to fabricate scaffolds with complex structures for tissue engineering and regenerative medicine applications. For extrusion-based 3D bioprinting, the success of printing complex structures relies largely on the properties of bioink. Methylcellulose (MC) has been exploited as a potential bioink for 3D bioprinting due to its temperature-dependent rheological properties. However, MC is highly soluble and has low structural stability at room temperature, making it suboptimal for 3D bioprinting applications. In this study, we report a one-step synthesis protocol for modifying MC with norbornene (MCNB), which serves as a new bioink for 3D bioprinting. MCNB preserves the temperature-dependent reversible sol-gel transition and readily reacts with thiol-bearing linkers through light-mediated step-growth thiol-norbornene photopolymerization. Furthermore, we rendered the otherwise inert MC network bioactive through facile conjugation of integrin-binding ligands (e.g. CRGDS) or via incorporating cell-adhesive and protease-sensitive gelatin-based macromer (e.g. GelNB). The adaptability of the new MCNB-based bioink offers an attractive option for diverse 3D bioprinting applications.