Tuning optical properties of nitrogen-doped carbon dots through fluorescence resonance energy transfer using Rhodamine B for the ratiometric sensing of mercury ions

Rapid detection of Hg2+ in an ON-OFF-ON process using N doped carbon dots

Contamination of ground water with pollutants released from various anthropogenic activities is a major concern due to its adverse effects on the environment and human health. Rapid and efficient detection of such pollutants is the first step toward remediation of the problem. Herein we report a two-point fluorescence turn OFF-ON detection method for Hg2+ ions using nitrogen doped carbon dots (NCDs). The NCDs obtained through solvothermal treatment of ammonium citrate tribasic in DMF at 190 °C for four hours exhibited a quantum yield of 9.67%. Hg2+ detection is demonstrated in two steps, first the quenching of the fluorescence of NCDs by Hg2+ and second the fluorescence recovery upon addition of ascorbic acid from different sources. A rapid filter paper-based detection device is demonstrated based on the principles developed.

Functionalized Triangular Carbon Quantum Dot Stabilized Gold Nanoparticles Decorated Boron Nitride Nanosheets Interfaced for Electrochemical Detection of Cardiac Troponin T

The fast, and highly sensitive estimation of cardiac troponin T (cTnT) is crucial for the early identification of acute myocardial infarction (AMI). The electrochemical immunoassay-based (EIB) sensors are highly promising for this purpose, as they offer precise measurements and can be directly assessed in intricate matrices, including blood. To increase sensitivity, EIB sensors use nanomaterials or amplification processes, which can be laborious to develop. With this, we develop an electrochemical immunosensor for the sensitive detection of cardiac troponin T (cTnT). The sensing platform is composed of functionalized triangular carbon quantum dots stabilized gold nanoparticles which are integrated with boron nitride nanosheets (caf-TCQDs@AuNPs on HO-BNNS). Ferrocene carboxylic acid (Fc-COOH) serves as the signal label. The composite was developed and examined using several techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), cyclic voltammetry, and chronocoulometry. The caf-TCQDs@AuNPs supported on HO-BNNS, have a large surface area and excellent electrical conductivity, and serve as an effective platform for the immobilization of anti-cTnT monoclonal antibodies via carbodiimide coupling. The Fc-COOH, functioning as a signal label through the oxidation process, was integrated with caf-TCQDs@AuNPs on the HO-BNNS platform to establish an electrochemical immunosensor for the detection of cTnT. The electrochemical immunosensor demonstrated excellent performance for the determination of cTnT under optimal conditions, exhibiting a linearity range spanning from 0.0001 to 100 ng mL-1, accompanied by a low detection limit of 0.0013 ng mL-1. Notably, the immunosensor revealed high specificity, as well as excellent levels of reproducibility and reliability for the examination of human serum samples.

Modification of Carbon Dots for Metal‐Ions Detection

It is very appealing to develop cheap, highly sensitive and efficient metal ion fluorescence sensors as traditional instrument methods are inherently costly and time‐consuming. Carbon dots (CDs) are widely used for sensing metal ions, attributing to their merits of good biocompatibility, low toxicity, easy surface modification and excellent photostability. This article reviewed the research progress of CDs as metal ion sensors in recent years, and studied their modification methods and detection performances. Finally, the challenges and opportunities of CDs as metal ion sensors were also analyzed. This article is expected to provide inspiration and help for researchers focusing on CDs as metal ion sensors.

Nitrogen-doped carbon dots: Recent developments in its fluorescent sensor applications

Doped carbon dots have attracted great attention from researchers across disciplines because of their unique characteristics, such as their low toxicity, physiochemical stability, photostability, and outstanding biocompatibility. Nitrogen is one of the most commonly used elements for doping because of its sizeable atomic radius, strong electronegativity, abundance, and availability of electrons. This distinguishes them from other atoms and allows them to perform distinctive roles in various applications. Here, we have reviewed the most current breakthroughs in nitrogen-doped CDs (N-CDs) for fluorescent sensor applications in the last five years. The first section of the article addresses several synthetic and sustainable ways of making N-CDs. Next, we briefly reviewed the fluorescent features of N-CDs and their sensing mechanism. Furthermore, we have thoroughly reviewed their fluorescent sensor applications as sensors for cations, anions, small molecules, enzymes, antibiotics, pathogens, explosives, and pesticides. Finally, we have discussed the N-CDs' potential future as primary research and how that may be used. We hope that this study will contribute to a better understanding of the principles of N-CDs and the sensory applications that they can serve.

Design of reversibly charge-changeable rhodamine B modified magnetic nanoparticles to enrich phosphopeptides

In the present study, by employing ethylenediaminetetraacetic acid (EDTA), tetraethylene pentaamine (TEPA), and rhodamine B (Rb), we designed and synthesized a magnetic adsorbent (Fe₃O₄@EDTA@TEPA@Rb) on the basis of reversible charge change of Rb and applied to capture phosphopeptides. Rb existing in open planarized zwitterion form when stimulated by acidic loading buffer adsorbs negative phosphopeptides via electrostatic interaction. Under the stimulation of alkalic eluent, ring-closed structure of Rb is formed to elute the enriched phosphopeptides. TEPA containing rich amino groups is used as a crosslinking agent, which is also protonated in acidic loading buffer to bond phosphopeptides. Then phosphopeptides are eluted when TEPA deprotonates in alkalic eluent. Coupled with matrix-assisted laser desorption/ionization time of flight mass spectrometry (MALDI-TOF-MS) detection, phosphopeptide signals originated from 0.4 fmol/μL β-casein digests were successfully detected. In addition, Fe₃O₄@EDTA@TEPA@Rb can also efficiently enrich phosphopeptides from skimmed milk, human serum and saliva samples (26, 4, 39 phosphopeptides, respectively), opening a new gallery for phosphopeptides-related analysis. In general, the developed adsorbent has the great potential for further application in the near future.

Marigold Flower-Shaped Metal-Organic Framework Supported Manganese Vanadium Oxide Electrocatalyst for Efficient Oxygen Evolution Reactions in an Alkaline Medium

The electrochemical oxygen evolution reaction (OER) is a key process in many renewable energy systems. The development of low-cost, long-lasting alternatives to precious-metal catalysts, particularly functional electrocatalysts with high activity for OER processes, is crucial for reducing the operating expense and complexity of renewable energy generating systems. This work describes a concise method for generating marigold flower-like metal-organic frameworks (MOFs) aided manganese vanadium oxide via a hydrothermal procedure for increased OER activity. As synthesized MOF MnV oxide has a higher surface area due to the 3D flower-like structure, which is reinvented with enhanced electrocatalytic active sites. These distinctive structural features result in remarkable catalytic activity for MOF MnV oxide microflowers towards OER with a low overpotential of 310 mV at 50 mA cm^-2 and a Tafel slope with only 51.4 mV dec^-1 in alkaline conditions. This study provides a concise method for developing an optimized catalytic material with greater morphology and beneficial features for potential energy and environmental applications.

In Vivo and In Vitro Biodistribution of Inulin-Tethered Boron-Doped Amine-Functionalized Carbon Dots

Carbon dots (CDs) are considered a potential substance for use in biomarker applications due to their exceptional light stability. However, there are several unsolved uncertainties about CD toxicity in vitro and in vivo. In this study, a redesigned derivative of the natural polysaccharide inulin is connected with boron-doped amine-functionalized carbon dots (In@BN-CDs) through carbodiimide coupling to improve the biocompatibility of the nanoformulation. The toxicity and biodistribution of ln@BN-CDs in vivo and in vitro were explored in detail. The In@BN-CDs were tested after a single inhalation dosage of 10, 7, 5, 3, and 1 mg/kg. We explored a dose- and time-dependent technique of collecting blood samples and then centrifuged the blood samples and obtained serum samples, which were then analyzed for fluorescence inspection; findings showed that the fluorescence intensity decreased with time. Similarly, In@BN-CDs were effectively used as in vitro toxicity and fluorescent probes for cellular imaging in living cells due to their biocompatibility and cell membrane accessibility. The biocompatibility and efficacy of In@BN-CDs as fluorescent imaging agents have been demonstrated. The data suggest that the usage of In@BN-CDs in vitro and in vivo should be examined.

One-Step Green Synthesis of Water-Soluble Fluorescent Carbon Dots and Its Application in the Detection of Cu2

Renewable biowaste-derived carbon dots have garnered immense interest owing to their exceptional optical, fluorescence, chemical, and environmentally friendly attributes, which have been exploited for the detection of metals, non-metals, and organics in the environment. In the present study, water-soluble fluorescent carbon dots (CDs) were synthesized via facile green microwave pyrolysis of pine-cone biomass as precursors, without any chemical additives. The synthesized fluorescent pine-cone carbon dots (PC-CDs) were spherical in shape with a bimodal particle-size distribution (average diameters of 15.2 nm and 42.1 nm) and a broad absorption band of between 280 and 350 nm, attributed to a π-π* and n-π* transition. The synthesized PC-CDs exhibited the highest fluorescent (FL) intensity at an excitation wavelength of 360 nm, with maximum emission of 430 nm. The synthesized PC-CDs were an excellent fluorescent probe for the selective detection of Cu2+ in aqueous solution, amidst the presence of other metal ions. The FL intensity of PC-CDs was exceptionally quenched in the presence of Cu2+ ions, with a low detection limit of 0.005 μg/mL; this was largely ascribed to Cu2+ ion binding interactions with the enriched surface functional groups on the PC-CDs. As-synthesized PC-CDs are an excellent, cost effective, and sensitive probe for detecting and monitoring Cu2+ metal ions in wastewater.