A solvent-free headspace GC/MS method for sensitive screening of N-nitrosodimethylamine in drug products

Investigation into the genotoxic impurity, 1-methyl-4-nitrosopiperazine, in rifampicin

This study assessed the presence of the genotoxic impurity 1-methyl-4-nitrosopiperazine (MNP) in 27 batches of rifampicin capsules obtained from 11 manufacturers in China. While they were below the temporary limit of 5 ppm set by the US Food and Drug Administration, the observed levels (0.33-2.36 ppm) exceeded the acceptable threshold of 0.16 ppm. Building upon preliminary findings and degradation experiments, we concluded that MNP is a by-product of the oxidative degradation of rifampicin or is introduced via oxidation or nitrosation during the synthesis process involving 1-methyl-4-aminopiperazine. The pathways of MNP formation were confirmed in this study. Furthermore, we observed that the addition of antioxidants, sealed storage, and selection of dominant crystal forms can aid in controlling MNP levels.

Ag-coated tetrapod gold nanostars (Au@AgNSs) for acetamiprid determination in tea using SERS combined with microfluidics

Acetamiprid is an organic and highly toxic compound. Despite being widely used as a pesticide agent on a large scale, acetamiprid poses numerous health risks to living organisms, particularly humans. Herein, a strategy for the detection of acetamiprid in tea employing surface-enhanced Raman scattering (SERS) technology incorporated with a microfluidic chip was developed. Significantly, a seed-mediated growth approach was utilized to engineer Ag-coated tetrapod gold nanostars (core-shell Au@AgNSs) with four sharp tips. The synthesized Au@AgNSs showed an enhancement factor of 7.2 × 106. Solid works was used to figure out the two-channel microfluidic chip featuring four circular split hybrid structures, and COMSOL (Software for Multiphysics Simulation) was utilized to model the fusion effect between the substrate (Au@AgNSs) and the sample (acetamiprid). For the first time, the core-shell Au@AgNSs and acetamiprid were fused in the microfluidic channel to facilitate the detection of acetamiprid using SERS. The outcomes pointed out that the standard curve correlation coefficient between SERS intensity (876 cm-1) and the concentration of acetamiprid in tea specimens was calculated as 0.991, while the limit of detection (LOD) was 0.048 ng mL-1, which is well below the minimum limit set by the European Union (10 ng mL-1). Thus, the developed technique combining SERS and microfluidics demonstrated high potential for the rapid and efficient detection of acetamiprid in tea.

What is the role of current mass spectrometry in pharmaceutical analysis?

The role of mass spectrometry (MS) has become more important in most application domains in recent years. Pharmaceutical analysis is specific due to its stringent regulation procedures, the need for good laboratory/manufacturing practices, and a large number of routine quality control analyses to be carried out. The role of MS is, therefore, very different throughout the whole drug development cycle. While it dominates within the drug discovery and development phase, in routine quality control, the role of MS is minor and indispensable only for selected applications. Moreover, its role is very different in the case of analysis of small molecule pharmaceuticals and biopharmaceuticals. Our review explains the role of current MS in the analysis of both small-molecule chemical drugs and biopharmaceuticals. Important features of MS-based technologies being implemented, method requirements, and related challenges are discussed. The differences in analytical procedures for small molecule pharmaceuticals and biopharmaceuticals are pointed out. While a single method or a small set of methods is usually sufficient for quality control in the case of small molecule pharmaceuticals and MS is often not indispensable, a large panel of methods including extensive use of MS must be used for quality control of biopharmaceuticals. Finally, expected development and future trends are outlined.

Nitrosamines crisis in pharmaceuticals - Insights on toxicological implications, root causes and risk assessment: A systematic review

The presence of N-nitroso compounds, particularly N-nitrosamines, in pharmaceutical products has raised global safety concerns due to their significant genotoxic and mutagenic effects. This systematic review investigates their toxicity in active pharmaceutical ingredients (APIs), drug products, and pharmaceutical excipients, along with novel analytical strategies for detection, root cause analysis, reformulation strategies, and regulatory guidelines for nitrosamines. This review emphasizes the molecular toxicity of N-nitroso compounds, focusing on genotoxic, mutagenic, carcinogenic, and other physiological effects. Additionally, it addresses the ongoing nitrosamine crisis, the development of nitrosamine-free products, and the importance of sensitive detection methods and precise risk evaluation. This comprehensive overview will aid molecular biologists, analytical scientists, formulation scientists in research and development sector, and researchers involved in management of nitrosamine-induced toxicity and promoting safer pharmaceutical products.

Dispersant-First Dispersive Liquid-Liquid Microextraction (DF-DLLME), a Novel Sample Preparation Procedure for NDMA Determination in Metformin Products

Since December 2019, global batch recalls of metformin pharmaceutical products have highlighted an urgent need to control N-nitrosodimethylamine (NDMA) contamination to demonstrate patient safety and maintain supply of this essential medicine. Due to their formulation, the metformin extended-release products present difficult analytical challenges for conventional sample preparation procedures, such as artefactual (in-situ) NDMA formation, gelling, and precipitation. To overcome these challenges, a new version of dispersive liquid-liquid microextraction (DLLME) termed dispersant-first DLLME (DF-DLLME) was developed and optimized for the analysis of NDMA in metformin extended-release products using a detailed Design of Experiments (DoE) to optimize sample preparation. Gas chromatography-high resolution accurate mass-mass spectrometry (GC-HRAM-MS) combined with automated DF-DLLME were successfully applied to monitor the NDMA levels of two different metformin extended-release AstraZeneca products to ultra-trace levels (parts per billion). The additional benefits associated with DF-DLLME, which include automation, time/costs saving, and greener sample preparation, make this novel technique easier to transfer from a development to Quality Control (QC) environment. In addition, this also offers an attractive candidate for the wider platform analysis of N-nitrosamines in pharmaceutical drug products.

Current status and prospects of development of analytical methods for determining nitrosamine and N-nitroso impurities in pharmaceuticals

Nitrosamine impurities in pharmaceuticals have recently been concerned for several national regulatory agencies to avoid carcinogenic and mutagenic effects in patients. The demand for highly sensitive and specific analytical methods with LOQs in the ppb and sub-ppb ranges is among the most significant challenges facing analytical scientists. In addition, artifactual nitrosamine formation during sample preparation and injection leading to overestimation of nitrosamines has received considerable attention. Numerous analytical methodologies have been reported for quantifying nitrosamine impurities in active pharmaceutical ingredients and medicinal products at the interim limit criteria as preventive measures. In this review, we meticulously discuss those reported gas and liquid chromatographic methods for nitrosamine determination in pharmaceuticals in aspects of chromatographic conditions and sensitivity of detection. We also introduce the potential of novel fluorescence-based methods recently developed to rapidly screen nitrosamine impurities. In addition, the review assesses the nitrosation assay procedure (NAP test), which is expected to be a future preventive measure for screening potential nitrosation and identifying suspected contamination with N-nitroso or other potential mutagenic impurities during the drug development process.

Development of a Sensitive Screening Method for Simultaneous Determination of Nine Genotoxic Nitrosamines in Active Pharmaceutical Ingredients by GC-MS

A worldwide crisis with nitrosamine contamination in medical products began in 2018. Therefore, trace-level analysis of nitrosamines is becoming an emerging topic of interest in the field of quality control. A novel GC-MS method with electron ionization and microextraction was developed and validated for simultaneous determination of nine carcinogenic nitrosamines (NDMA, NMEA, NDEA, NDBA, NMOR, NPYR, NPIP, NDPA, and N-methyl-npz) in active pharmaceutical ingredients (APIs): cilostazol, sunitinib malate, and olmesartan medoxomil. The method was validated according to the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) guidelines, demonstrating good linearity in the range of LOQ up to 21.6 ng/mL (120% of specification limit). The limits of detection for the nine nitrosamines were determined to be in the range 0.15–1.00 ng/mL. The developed trace level GC-MS method turned out to be specific, accurate, and precise. The accuracy of all the tested APIs ranged from 94.09% to 111.22% and the precision evaluated by repeatability, intermediate precision, and system precision was RSD ≤ 7.65%. Nitrosamines were not detected in cilostazol and sunitinib, whereas in olmesartan medoxomil NDEA was detected at the level of LOQ. The novel protocol was successfully applied for nitrosamines determination in selected APIs and can be used for the routine quality control of APIs under Good Manufacturing Practices rules, ensuring the safety and effectiveness of pharmaceutical products.