Decellularized scaffold and its elicited immune response towards the host: the underlying mechanism and means of immunomodulatory modification

Acellular carotid scaffold and evaluation the biological and biomechanical properties for tissue engineering

Introduction

The issues associated with the limitation of appropriate autologous vessels for vascular reconstruction via bypass surgery highlight the need for new alternative strategies based on tissue engineering. The present study aimed to prepare decellularized scaffolds from ovine carotid using chemical decellularization method.

Methods

Ovine carotid were decellularized with Triton X-100 and tri-n-butyl phosphate (TnBP) at 37 °C. Histological analysis, biochemical tests, biomechanical assay and biocompatibility assay were used to investigate the efficacy of decellularization.

Results

Decellularization method could successfully decellularize ovine carotid without leaving any cell remnants. Scaffolds showed minimal destruction of the three-dimensional structure and extracellular matrix, as well as adequate mechanical resistance and biocompatibility for cell growth and proliferation.

Conclusion

Prepared acellular scaffold exhibited the necessary characteristics for clinical applications.

Characterisation of Matrix-Bound Nanovesicles (MBVs) Isolated from Decellularised Bovine Pericardium: New Frontiers in Regenerative Medicine

Matrix-bound nanovesicles (MBVs) are a recently discovered type of extracellular vesicles (EVs), and they are characterised by a strong adhesion to extracellular matrix structural proteins (ECM) and ECM-derived biomaterials. MBVs contain a highly bioactive and tissue-specific cargo that recapitulates the biological activity of the source ECM. The rich content of MBVs has shown to be capable of potent cell signalling and of modulating the immune system, thus the raising interest for their application in regenerative medicine. Given the tissue-specificity and the youthfulness of research on MBVs, until now they have only been isolated from a few ECM sources. Therefore, the objective of this research was to isolate and identify the presence of MBVs in decellularised bovine pericardium ECM and to characterise their protein content, which is expected to play a major role in their biological potential. The results showed that nanovesicles, corresponding to the definition of recently described MBVs, could be isolated from decellularised bovine pericardium ECM. Moreover, these MBVs were composed of numerous proteins and cytokines, thus preserving a highly potential biological effect. Overall, this research shows that bovine pericardium MBVs show a rich and tissue-specific biological potential.

Impact of various detergent-based immersion and perfusion decellularization strategies on the novel caprine pancreas derived extracellular matrix scaffold

Limited availability of the organs donors has facilitated the establishment of xenogeneic organ sources for transplantation. Numerous studies have decellularized several organs and assessed their implantability in order to provide such organs. Among all the decellularized organs studies for xenotransplantation, the pancreas has garnered very limited amount of research. The presently offered alternatives for pancreas transplantation are unable to liberate patients from donor dependence. The rat and mice pancreas are not of an accurate size for transplantation but can only be used for in-vitro studies mimicking in-vivo immune response in humans, while the porcine pancreas can cause zoonotic diseases as it carries porcine endogenous retrovirus (PERV- A/B/C). Therefore, we propose caprine pancreas as a substitute for these organs, which not only reduces donor dependence but also poses no risk of zoonosis. Upon decellularization the extracellular matrix (ECM) of different tissues responds differently to the detergents used for decellularization at physical and physiological level; this necessitates a comprehensive analysis of each tissue independently. This study investigates the impact of decellularization by ionic (SDS and SDC), non-ionic (Triton X-100 and Tween-20), and zwitterionic detergents (CHAPS). All these five detergents have been used to decellularize caprine pancreas via immersion (ID) and perfusion (PD) set-up. In this study, an extensive comparison of these two configurations (ID and PD) with regard to each detergent has been conducted. The final obtained scaffold with each set-up has been evaluated for the left-over cytosolic content, ECM components like sGAG, collagen, and fibronectin were estimated via Prussian blue and Immunohistochemical staining respectively, and finally for the tensile strength and antimicrobial activity. All the detergents performed consistently superior in PD than in ID. Conclusively, PD with SDS, SDC, and TX-100 successfully decellularizes caprine pancreatic tissue while retaining ECM architecture and mechanical properties. This research demonstrates the viability of caprine pancreatic tissue as a substitute scaffold for porcine organs and provides optimal decellularization protocol for this xenogeneic tissue. This research aims to establish a foundation for further investigations into potential regenerative strategies using this ECM in combination with other factors.

Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review

This article provides a thorough overview of the available resorbable biomaterials appropriate for producing replacements for damaged tissues. In addition, their various properties and application possibilities are discussed as well. Biomaterials are fundamental components in tissue engineering (TE) of scaffolds and play a critical role. They need to exhibit biocompatibility, bioactivity, biodegradability, and non-toxicity, to ensure their ability to function effectively with an appropriate host response. With ongoing research and advancements in biomaterials for medical implants, the objective of this review is to explore recently developed implantable scaffold materials for various tissues. The categorization of biomaterials in this paper includes fossil-based materials (e.g., PCL, PVA, PU, PEG, and PPF), natural or bio-based materials (e.g., HA, PLA, PHB, PHBV, chitosan, fibrin, collagen, starch, and hydrogels), and hybrid biomaterials (e.g., PCL/PLA, PCL/PEG, PLA/PEG, PLA/PHB PCL/collagen, PCL/chitosan, PCL/starch, and PLA/bioceramics). The application of these biomaterials in both hard and soft TE is considered, with a particular focus on their physicochemical, mechanical, and biological properties. Furthermore, the interactions between scaffolds and the host immune system in the context of scaffold-driven tissue regeneration are discussed. Additionally, the article briefly mentions the concept of in situ TE, which leverages the self-renewal capacities of affected tissues and highlights the crucial role played by biopolymer-based scaffolds in this strategy.

Composite Hydrogel Conduit Incorporated with Platelet-Rich Plasma Improved the Regenerative Microenvironment for Peripheral Nerve Repair

Peripheral nerve regeneration and functional recovery remain major challenges in clinical practice. Nerve guidance conduits (NGCs) which can regulate the regenerative microenvironment are beneficial for peripheral nerve repair. Platelet-rich plasma (PRP) can secrete multiple growth factors to regulate the regenerative microenvironment. However, current administration methods of PRP are rapidly activated followed by the burst release of growth factors, causing low therapeutic efficiency in vivo. To overcome these disadvantages, a composite nerve conduit was fabricated by incorporating PRP into a gelatin methacrylate (GelMA) and sodium alginate (SA) hydrogel. The GelMA/SA-3/PRP-20 NGCs possess optimal mechanical properties, degradation rate, and superior biological performance. Importantly, GelMA/SA-3/PRP-20 NGCs achieved the sustained release of two major growth factors (VEGF-A, PDGF-BB) from PRP. Moreover, the GelMA/SA-3/PRP-20 NGCs significantly promoted the migration of Schwann cells and the neovascularization of endothelial cells in vitro. While bridging 10 mm rat sciatic nerve defects, the GelMA/SA-3/PRP-20 NGCs promoted axonal regeneration and functional recovery of peripheral nerves. Therefore, the GelMA/SA-3/PRP-20 NGCs could regulate the regenerative microenvironment by sustained release of growth factors from PRP and shed new light on the clinical application of PRP in peripheral nerve repair.

Polyphenolic-modified cellulose acetate membrane for bone regeneration through immunomodulation

To enhance the bioactivity of cellulosic derivatives has become an important strategy to promote their value for clinical applications. Herein, protocatechualdehyde (PCA), a polyphenolic molecule, was used to modify a cellulose acetate (CA) membrane by combining with metal ions to confer an immunomodulatory activity. The PCA-modified CA membrane has shown a significant radical scavenging activity, thereby suppressed the inflammatory response and created a favorable immune microenvironment for osteogenesis and mineralization. Moreover, addition of metal ions could further stimulate the osteogenic differentiation of stem cells and accelerate bone regeneration both in vitro and in vivo. This study may provide a strategy to promote the immunomodulatory activity of cellulose-based biomaterials for bone regeneration.

Decellularized extracellular matrix (d-ECM): the key role of the inflammatory process in pre-regeneration after implantation

Clinical medicine is encountering the challenge of repairing soft-tissue defects. Currently, natural and synthetic materials have been developed as natural scaffolds. Among them, the decellularized extracellular matrix (d-ECM) can achieve tissue remodeling following injury and, thus, replace defects due to its advantages of the extensiveness of the source and excellent biological and mechanical properties. However, by analyzing the existing decellularization techniques, we found that different preparation methods directly affect the residual components of the d-ECM, and further have different effects on inflammation and regeneration of soft tissues. Therefore, we analyzed the role of different residual components of the d-ECM after decellularization. Then, we explored the inflammatory process and immune cells in an attempt to understand the mechanisms and causes of tissue degeneration and regeneration after transplantation. In this paper, we summarize the current studies related to updated protocols for the preparation of the d-ECM, biogenic and exogenous residual substances, inflammation, and immune cells influencing the fate of the d-ECM.

Macrophage response mediated by extracellular matrix: recent progress

Biomaterials are one of efficient treatment options for tissue defects in regenerative medicine. Compared to synthetic materials which tend to induce chronic inflammatory response and fibrous capsule, extracellular matrix (ECM) scaffold materials composed of biopolymers are thought to be capable of inducing a pro-regenerative immune microenvironment and facilitate wound healing. Immune cells are the first line of response to implanted biomaterials. In particular, macrophages greatly affect cell behavior and the ultimate treatment outcome based on multiple cell phenotypes with various functions. The macrophage polarization status is considered as a general reflection of the characteristics of the immune microenvironment. Since numerous reports has emphasized the limitation of classical M1/M2 nomenclature, high-resolution techniques such as single-cell sequencing has been applied to recognize distinct macrophage phenotypes involved in host responses to biomaterials. After reviewing latest literatures that explored the immune microenvironment mediated by ECM scaffolds, this paper describe the behaviors of highly heterogeneous and plastic macrophages subpopulations which affect the tissue regeneration. The mechanisms by which ECM scaffolds interact with macrophages are also discussed from the perspectives of the ECM ultrastructure along with the nucleic acid, protein, and proteoglycan compositions, in order to provide targets for potential therapeutic modulation in regenerative medicine.

A self-fused hydrogel for the treatment of glottic insufficiency through outstanding durability, extracellular matrix-inducing bioactivity and function preservation

Injection laryngoplasty with biomaterials is an effective technique to treat glottic insufficiency. However, the inadequate durability, deficient pro-secretion of extracellular matrix (ECM) and poor functional preservation of current biomaterials have yielded an unsatisfactory therapeutic effect. Herein, a self-fusing bioactive hydrogel comprising modified carboxymethyl chitosan and sodium alginate is developed through a dual-crosslinking mechanism (photo-triggered and dynamic covalent bonds). Owing to its characteristic networks, the synergistic effect of the hydrogel for vocal folds (VFs) vibration and phonation is adequately demonstrated. Notably, owing to its inherent bioactivity of polysaccharides, the hydrogel could significantly enhance the secretion of major components (type I/III collagen and elastin) in the lamina propria of the VFs both in vivo and in vitro. In a rabbit model for glottic insufficiency, the optimized hydrogel (C₁A₁) has demonstrated a durability far superior to that of the commercially made hyaluronic acid (HA) Gel. More importantly, owing to the ECM-inducing bioactivity, the physiological functions of the VFs treated with the C₁A₁ hydrogel also outperformed that of the HA Gel, and were similar to those of the normal VFs. Taken together, through a simple-yet-effective strategy, the novel hydrogel has demonstrated outstanding durability, ECM-inducing bioactivity and physiological function preservation, therefore has an appealing clinical value for treating glottic insufficiency.

Preparation and Characterization of Extracellular Matrix Hydrogels Derived from Acellular Cartilage Tissue

Decellularized matrices can effectively reduce severe immune rejection with their cells and eliminated nucleic acid material and provide specific environments for tissue repair or tissue regeneration. In this study, we prepared acellular cartilage matrix (ACM) powder through the decellularization method and developed ACM hydrogels by physical, chemical, and enzymatic digestion methods. The results demonstrated that the small size group of ACM hydrogels exhibited better gel conditions when the concentration of ACM hydrogels was 30 and 20 mg/mL in 1N HCl through parameter adjustment. The data also confirmed that the ACM hydrogels retained the main components of cartilage: 61.18% of glycosaminoglycan (GAG) and 78.29% of collagen, with 99.61% of its DNA removed compared to samples without the decellularization procedure (set as 100%). Through turbidimetric gelation kinetics, hydrogel rheological property analysis, and hydrogel tissue physical property testing, this study also revealed that increasing hydrogel concentration is helpful for gelation. Besides, the ex vivo test confirmed that a higher concentration of ACM hydrogels had good adhesive properties and could fill in cartilage defects adequately. This study offers useful information for developing and manufacturing ACM hydrogels to serve as potential alternative scaffolds for future cartilage defect treatment.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

Design of biopolymer-based hemostatic material: Starting from molecular structures and forms

Uncontrolled bleeding remains as a leading cause of death in surgical, traumatic, and emergency situations. Management of the hemorrhage and development of hemostatic materials are paramount for patient survival. Owing to their inherent biocompatibility, biodegradability and bioactivity, biopolymers such as polysaccharides and polypeptides have been extensively researched and become a focus for the development of next-generation hemostatic materials. The construction of novel hemostatic materials requires in-depth understanding of the physiological hemostatic process, fundamental hemostatic mechanisms, and the effects of material chemistry/physics. Herein, we have recapitulated the common hemostatic strategies and development status of biopolymer-based hemostatic materials. Furthermore, the hemostatic mechanisms of various molecular structures (components and chemical modifications) are summarized from a microscopic perspective, and the design based on them are introduced. From a macroscopic perspective, the design of various forms of hemostatic materials, e.g., powder, sponge, hydrogel and gauze, is summarized and compared, which may provide an enlightenment for the optimization of hemostat design. It has also highlighted current challenges to the development of biopolymer-based hemostatic materials and proposed future directions in chemistry design, advanced form and clinical application.

•

Biopolymers possess sound biocompatibility, biodegradability and bioactivity for the design of hemostatic materials.

•

Molecular structure designs including component and chemical modification are summarized from a microscopic perspective.

•

Design of various forms of hemostatic materials is discussed and compared synthetically from a macroscopic perspective.

Construction of Artificial Ovaries with Decellularized Porcine Scaffold and Its Elicited Immune Response after Xenotransplantation in Mice

Substitution by artificial ovary is a promising approach to restore ovarian function, and a decellularized extracellular matrix can be used as a supporting scaffold. However, biomimetic ovary fabrication and immunogenicity requires more investigation. In this study, we proposed an effective decellularization protocol to prepare ovarian scaffolds, which were characterized by few nuclear substances and which retained the extracellular matrix proteins. The ovarian tissue shape and 3-dimensional structure were well-preserved after decellularization. Electron micrographs demonstrated that the extracellular matrix fibers in the decellularized group had similar porosity and structure to those of native ovaries. Semi-quantification analysis confirmed that the amount of extracellular matrix proteins was reduced, but the collagen fiber length, width, and straightness did not change significantly. Granulosa cells were attached and penetrated into the decellularized scaffold and exhibited high proliferative activity with no visible apoptotic cells on day 15. Follicle growth was compromised on day 7. The implanted artificial ovaries did not restore endocrine function in ovariectomized mice. The grafts were infiltrated with immune cells within 3 days, which damaged the artificial ovary morphology. The findings suggest that immune rejection plays an important role when using artificial ovaries.

Regenerative Potential of A Bovine ECM-Derived Hydrogel for Biomedical Applications

Recent advancements in regenerative medicine have enhanced the development of biomaterials as multi-functional dressings, capable of accelerating wound healing and addressing the challenge of chronic wounds. Hydrogels obtained from decellularized tissues have a complex composition, comparable to the native extracellular environment, showing highly interesting characteristics for wound healing applications. In this study, a bovine pericardium decellularized extracellular matrix (dECM) hydrogel was characterized in terms of macromolecules content, and its immunomodulatory, angiogenic and wound healing potential has been evaluated. The polarization profile of human monocytes-derived macrophages seeded on dECM hydrogel was assessed by RT-qPCR. Angiogenic markers expression has been evaluated by Western blot and antibody array on cell lysates derived from endothelial cells cultured on dECM hydrogel, and a murine in vivo model of hindlimb ischemia was used to evaluate the angiogenic potential. Fibroblast migration was assessed by a transwell migration assay, and an in vivo murine wound healing model treated with dECM hydrogels was also used. The results showed a complex composition, of which the major component is collagen type I. The dECM hydrogel is biocompatible, able to drive M2 phenotype polarization, stimulate the expression of angiogenic markers in vitro, and prevent loss of functionality in hindlimb ischemia model. Furthermore, it drives fibroblast migration and shows ability to facilitate wound closure in vivo, demonstrating its great potential for regenerative applications.

Decellularized extracellular matrix scaffolds: Recent trends and emerging strategies in tissue engineering

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Multi-crosslinking hydrogels with robust bio-adhesion and pro-coagulant activity for first-aid hemostasis and infected wound healing

Bio-adhesive polysaccharide-based hydrogels have attracted much attention in first-aid hemostasis and wound healing for excellent biocompatibility, antibacterial property and pro-healing bioactivity. Yet, the inadequate mechanical properties and bio-adhesion limit their applications. Herein, based on dynamic covalent bonds, photo-triggered covalent bonds and hydrogen bonds, multifunctional bio-adhesive hydrogels comprising modified carboxymethyl chitosan, modified sodium alginate and tannic acid are developed. Multi-crosslinking strategy endows hydrogels with improved strength and flexibility simultaneously. Owing to cohesion enhancement strategy and self-healing ability, considerable bio-adhesion is presented by the hydrogel with a maximal adhesion strength of 162.6 kPa, 12.3-fold that of commercial fibrin glue. Based on bio-adhesion and pro-coagulant activity (e.g., the stimulative aggregation and adhesion of erythrocytes and platelets), the hydrogel reveals superior hemostatic performance in rabbit liver injury model with blood loss of 0.32 g, only 54.2% of that in fibrin glue. The healing efficiency of hydrogel for infected wounds is markedly better than commercial EGF Gel and Ag⁺ Gel due to the enhanced antibacterial and antioxidant properties. Through the multi-crosslinking strategy, the hydrogels show enhanced mechanical properties, fabulous bio-adhesion, superior hemostatic performance and promoting healing ability, thereby have an appealing application value for the first-aid hemostasis and infected wound healing.

•

The multifunctional hydrogel comprising polysaccharides and tannic acid was developed through multi-crosslinking strategy.

•

The multifunctional hydrogel showed 12.3-fold adhesion strength than commercial fibrin glue.

•

The multifunctional hydrogel revealed pro-coagulant activity and excellent hemostatic effect in vivo.

•

The multifunctional hydrogel effectively promoted the healing of infected wounds via multiple mechanisms.

[Experimental study on the construction of telmisartan/collagen/polycaprolactone nerve conduit and its repair effect on rat sciatic nerve defect]

OBJECTIVE

To construction the telmisartan/collagen/polycaprolactone (PCL) nerve conduit and assess its effect on repairing sciatic nerve defect in rats.

METHODS

The 60% collagen/hexafluoroisopropanol (HFIP) solution and 40% PCL/HFIP solution were prepared and mixed (collagen/PCL solution). Then the 0, 5, 10, and 20 mg of telmisartan were mixed with the 10 mL collagen/PCL solution, respectively. Telmisartan/collagen/PCL nerve conduits were fabricated via high voltage electrospinning technology. The structure of nerve conduit before and after crosslinking was observed by using scanning electron microscope (SEM). The drug release efficiency was detected by in vitro sustained release method. RAW264.7 cells were cultured with lipopolysaccharide to induce inflammation, and then co-cultured with nerve conduits loaded with different concentrations of telmisartan for 24 hours. The mRNA expressions of inducible nitric oxide synthase (iNOS) and Arginase 1 (Arg-1) were detected by using real-time fluorescence quantitative PCR. Forty adult Wistar rats were randomly divided into 4 groups ( n=10). After preparing 15-mm-long sciatic nerve defect, the defect was repaired by cross-linked nerve conduits loaded with 0, 5, 10, and 20 mg telmisartan in groups A, B, C, and D, respectively. After operation, the general condition of rats was observed after operation; the sciatic function index (SFI) was tested; the bridging between the nerve conduit and sciatic nerve, and the integrity of nerve conduit were observed; the tissue growth in nerve conduit and material degradation were observed by HE staining; the expressions of CD86 (M1 macrophage marker), CD206 (M2 macrophage marker), myelin basic protein (MBP), and myelin protein 0 (P0) in new tissues were also observed by immunohistochemical staining; the expressions of neurofilament 200 (NF-200) and S-100β in new tissues were assessed by immunofluorescence staining.

RESULTS

The general observation showed that the inner diameter of the nerve conduit was 1.8 mm and the outer diameter was 2.0 mm. After cross-linking by genipin, the nanofiber became thicker and denser. The drug release test showed that the telmisartan loaded nerve conduit could be released gradually. With the increase of telmisartan content in nerve conduit, the iNOS mRNA expression decreased and the Arg-1 mRNA expression increased; and the differences between 20 mg group and other groups were significant ( P<0.05). In vivo experiment showed that all animals in each group survived until the completion of the experiment. The SFI was significantly higher in groups C and D than in groups A and B at different time points ( P<0.05) and in group D than in group C at 6 months after operation ( P<0.05). HE staining showed that there were significantly more new tissues in the middle of the nerve conduit in group D after operation than in other groups. Immunohistochemical staining showed that CD86 and CD206 stainings were positive in each group at 1 month after operation, among which group D had the lowest positive rate of CD86 and the highest positive rate of CD206, and there were significant differences in the positive rate of CD206 between group D and groups A, B, and C ( P<0.05); the MBP and P0 stainings were positive in groups C and D at 6 months, and the positive rate in group D was significantly higher than that in group C ( P<0.05). Immunofluorescence staining showed that the NF-200 and S-100β expressions in group D were significantly higher than those in other groups.

CONCLUSION

Telmisartan/collagen/PLC nerve conduit can promote the sciatic nerve defect repair in rats through promoting the polarization of M1 macrophages to M2 macrophages, and the nerve conduit loaded with20 mg telmisartan has the most significant effect.

A Novel Decellularized Trachea Preparation Method for Rapid Construction of a Functional Tissue Engineered Trachea to Repair Tracheal Defects

Long segment trachea defects are repaired by tracheal substitution, while the decellularized technology has been effectively employed to prepare tissue engineering trachea (TET). However, its clinical application is restrictied by...

Membranous Extracellular Matrix-Based Scaffolds for Skin Wound Healing

Membranous extracellular matrix (ECM)-based scaffolds are one of the most promising biomaterials for skin wound healing, some of which, such as acellular dermal matrix, small intestinal submucosa, and amniotic membrane, have been clinically applied to treat chronic wounds with acceptable outcomes. Nevertheless, the wide clinical applications are always hindered by the poor mechanical properties, the uncontrollable degradation, and other factors after implantation. To highlight the feasible strategies to overcome the limitations, in this review, we first outline the current clinical use of traditional membranous ECM scaffolds for skin wound healing and briefly introduce the possible repair mechanisms; then, we discuss their potential limitations and further summarize recent advances in the scaffold modification and fabrication technologies that have been applied to engineer new ECM-based membranes. With the development of scaffold modification approaches, nanotechnology and material manufacturing techniques, various types of advanced ECM-based membranes have been reported in the literature. Importantly, they possess much better properties for skin wound healing, and would become promising candidates for future clinical translation.

Recent Advances in Natural Materials for Corneal Tissue Engineering

Given the incidence of corneal dysfunctions and diseases worldwide and the limited availability of healthy, human donors, investigators are working to generate engineered cellular and acellular therapeutic approaches as alternatives to corneal transplants from human cadavers. These engineered strategies aim to address existing complications with human corneal transplants, including graft rejection, infection, and complications resulting from surgical methodologies. The main goals of these research endeavors are to (1) determine ideal mechanical properties, (2) devise methodologies to improve the efficacy of engineered corneal grafts and cell-based therapies, and (3) optimize transplantation of engineered tissue structures in the eye. Thus, recent innovations have sought to address these challenges through both in vitro and in vivo studies. This review covers recent work aimed at evaluating engineered materials, potential therapeutic cells, and the resulting cell-material interactions that lead to optimal corneal graft properties. Furthermore, we discuss promising strategies in corneal tissue engineering techniques and in vivo studies in animal models.