Photoresponsive macrocycles for selective binding and release of sulfate

Selective Binding and Light-Driven Release of Fluorous PF6- and Radioactive 99TcO4- Anions for All-to-Nothing Liquid-Liquid Extraction

The removal of anions from aqueous media using molecular receptors in liquid-liquid extraction is a long-standing strategy to clean up contaminated water sources. Therein, high selectivity is needed to remove specific ions from mixtures of other ions, and high affinity provides extractions at low concentrations. However, the high affinity creates a conundrum by impeding the release of the ions in any stripping steps needed for further processing. To circumvent this problem, light-responsive receptors have been proposed as candidates for turning off the binding, but they are currently untested in liquid-liquid extraction. We tested the feasibility of light-driven release using a cyanostar macrocycle. We demonstrate the selective extraction of PF6- anions over large excesses of competing anions (Cl-, NO3-, SO42-) followed by photodriven release for quantitative isolation of the target. Release relies on photoisomerization of the macrocycle's five stilbenes generating distorted isomers to turn off binding. With modest reversibility, only a single-shot release was demonstrated, akin to photodriven uncaging. These methods were extended to the capture and photodriven release of ReO4- and radioactive 99TcO4- anions at ∼90% efficiency. Extraction was demonstrated down to the highly dilute 4 ppb levels of the 99TcO4- anion. This proof-of-concept demonstration verifies the use of a large change in affinity for the all-to-nothing capture and release of target anions between liquid phases.

Light and protonation-controlled complex formation between sulfate ions and a stiff-stilbene based bis(cyclopeptide)

Anion-ligand coordination has been used to generate a number of supramolecular structures. Of particular interest is the transformation between different types of complexes using various stimuli. While there are multiple examples where this has been achieved with metal-ligand coordination complexes through incorporation of molecular photoswitches, the same has not yet been realized with anion-ligand coordination-driven assemblies. In this study, a sulfate-binding bis(cyclopeptide) with a photoswitchable stiff-stilbene linker is presented. Its (E)- and (Z)-isomers, and the different degrees of protonation of the anion (HSO4 - vs. SO4 2-), give rise to different assembly states. The accessible products have 1 : 1, 1 : 2 and 2 : 2 host-guest stoichiometries and can be interconverted by light irradiation and acid/base addition, resulting in a highly controllable responsive system that demonstrates the potential of sulfate coordination-driven supramolecular assembly.

A Photoswitchable Chloride-Binding [2] Rotaxane

Control over the binding properties of anion receptors by external stimuli can be advantageous in various applications such as extraction and transport processes. Toward a light-responsive anion receptor with high binding affinity and selectivity, a stiff-stilbene photoswitch is incorporated into the macrocycle of a mechanically interlocked, chloride-binding [2]rotaxane structure. UV-Vis and 1H NMR studies show reversible transformation between Z/E-isomers upon light irradiation, causing changes in motional dynamics and binding affinity. Photoswitching also takes place in the presence of chloride, as monitored by 1H NMR spectroscopy, which results in its concomitant uptake and release. Our results show the suitability of rotaxanes as light-responsive ion receptors, which could serve as prototypes for supramolecular pumps.

A photoswitchable [2]catenane receptor

A [2]catenane-based receptor functionalized with stiff-stilbene can be reversibly switched with 340/385 nm light between its Z- and E-isomers, which leads to a considerable change in chloride binding affinity. Photoisomerization in the presence of chloride allows for in situ on demand guest uptake and release.

Engineering Nanobelt Structure via Sulphur and Oxygen Doping: Synthesis, Structural Characterization, and Complexation with Fullerenes

This study explores the synthesis, structural characterization, and host-guest interactions of heteroatom bridged nanobelts, focusing on a cyclothianthrene nanobelt and a fused nanobelt incorporating thianthrene and phenoxathiin. Utilizing a cyclization-followed-by-bridging synthetic approach, both molecular belts were successfully synthesized, and their structures confirmed through NMR and MALDI-TOF-MS analysis. Crystallographic studies revealed that the cyclothianthrene nanobelt adopts an octagonal column-like conformation, while the hybrid belt forms an oval tub-shaped shape, both exhibiting distinct assembly motifs. The host-guest chemistry of these nanobelts was investigated with fullerenes (C60, C70, and PC61BM). The cyclothianthrene belt showed no interaction with these fullerenes, whereas the other belt demonstrated adaptive binding capabilities, forming stable complexes with C60 and C70 through π-π interactions and C-H⋅⋅⋅S hydrogen bonds. The binding constants indicated that the hybrid belt has a stronger affinity for C70 due to better size complementarity. Additionally, its interaction with PC61BM showcased a specific 1 : 1 binding mode despite exhibiting a smaller binding constant. This study underscores the impact of heteroatom incorporation on the structural and functional properties of nanobelts, offering insights for future molecular design strategies.

Anion-templated synthesis of a switchable fluorescent [2]catenane with sulfate sensing capability

Anion templation strategies have facilitated the synthesis of various catenane and rotaxane hosts capable of strong and selective binding of anions in competitive solvents. However, this approach has primarily relied on positively charged precursors, limiting the structural diversity and the range of potential applications of the anion-templated mechanically interlocked molecules. Here we demonstrate the synthesis of a rare electroneutral [2]catenane using a powerful, doubly charged sulfate template and a complementary diamidocarbazole-based hydrogen bonding precursor. Owing to the unique three-dimensional hydrogen bonding cavity and the embedded carbazole fluorophores, the resulting catenane receptor functions as a sensitive fluorescent turn-ON sensor for the highly hydrophilic sulfate, even in the presence of a large excess of water. Importantly, the [2]catenane exhibits enhanced binding affinity and selectivity for sulfate over its parent macrocycle and other acyclic diamidocarbazole-based receptors. We demonstrate also, for the first time, that the co-conformation of the catenane may be controlled by reversible acid/base induced protonation and deprotonation of the anionic template, SO42-. This approach pioneers a new strategy to induce molecular motion of interlocked components using switchable anionic templates.

A Photoswitchable Macrocycle Controls Anion-Templated Pseudorotaxane Formation and Axle Relocalization

Important biological processes, such as signaling and transport, are regulated by dynamic binding events. The development of artificial supramolecular systems in which binding between different components is controlled could help emulate such processes. Herein, we describe stiff-stilbene-containing macrocycles that can be switched between (Z)- and (E)-isomers by light, as demonstrated by UV/Vis and 1 H NMR spectroscopy. The (Z)-isomers can be effectively threaded by pyridinium halide axles to give pseudorotaxane complexes, as confirmed by 1 H NMR titration studies and single-crystal X-ray crystallography. The overall stability of these complexes can be tuned by varying the templating counteranion. However, upon light-induced isomerization to the (E)-isomer, the threading capability is drastically reduced. The axle component, in addition, can form a heterodimeric complex with a secondary isophthalamide host. Therefore, when all components are combined, light irradiation triggers axle exchange between the macrocycle and this secondary host, which has been monitored by 1 H NMR spectroscopy and simulated computationally.

Photoresponsive Supramolecular Cages and Macrocycles

The utilisation of light to achieve precise manipulation and control over the structure and function of supramolecular assemblies has emerged as a highly promising approach in the development of complex, configurable, or multifunctional systems and nanoscopic machine-like entities. In this minireview, we highlight recent examples of self-assembled and covalently bound cages and macrocycles with a focus on the external and internal functionalisation of a structure with a photoswitchable unit or the embedment of a photoswitch into the framework of a structure. Functionalising the interior or exterior of a supramolecular cage or macrocycle with a photoresponsive group enables control over different properties, such as guest binding or assembly in the solid-state, while the overall shape of the assembly often undergoes no significant change. By directly integrating a photoswitchable unit into the framework of a supramolecular structure, the isomerisation can either induce a geometry change, the disassembly, or the disassembly and reassembly of the structure. Historical and recent examples covered in this review are based on azobenzene, diarylethene, stilbene photoswitches, or alkene motors that were incorporated into macrocycles and cages constructed by metal-organic, dynamic covalent, or covalent bonds.

Photo-controllable binding and release of HP2O73- using an azobenzene based smart macrocycle

Herein, we describe the design and synthesis of an unusual azobenzene-bearing macrocycle 1, whose trans isomer was found able to 100% transform into its cis configuration under photoirradiation, for selectively recognizing HP2O73- with reversibly photo-controllable binding and release properties.

Synthesis of (R)-(6-Methoxyquinolin-4-yl)[(1S,2S,4S,5R)-5-vinylquinuclidin-2-yl]methanol Tetraphenylborate Ion-Pair Complex: Characterization, Antimicrobial, and Computational Study

The (R)-(6-Methoxyquinolin-4-yl)[(1S,2S,4S,5R)-5-vinylquinuclidin-2-yl]methanol (quinine)-tetraphenylborate complex was synthesized by reacting sodium tetraphenyl borate with quinine in deionized water at room temperature through an ion-pair reaction (green chemistry) at room temperature. The solid complex was characterized by several physicochemical methods. The formation of ion-pair complex between bio-active molecules and/or organic molecules is crucial to comprehending the relationships between bioactive molecules and receptor interactions. The complex under study was examined for antimicrobial activity. All theoretical calculations were carried out in vacuum and water using the B3LYP level 6-311G(d,p) levels of theory. The theoretical computation allowed for the prediction and visualization of ionic interactions, which explained the complex's stability. The results of energy optimization showed that the Q-TPB complex is stable with a negative complexation energy. The obtained geometries showed that the boron (B-) and nitrogen (N+) in piperidine of the two molecules tetraphenylborate and quinine are close to each other, which makes it possible for ions to interact. The modest energy gap between HOMO and LUMO showed that the compound was stable. The computation of the electron transitions of the two models by density functional theory (TD-DFT) in the solvent at the theoretical level B3LYP/6-311G(d,p) allowed for the detection of three UV/visible absorption bands for both models and the discovery of a charge transfer between the host and the guest. The UV absorption, infrared, and H NMR are comparable with the experimental part.

Stimulus-Controlled Anion Binding and Transport by Synthetic Receptors

Anionic species are omnipresent and involved in many important biological processes. A large number of artificial anion receptors has therefore been developed. Some of these are capable of mediating transmembrane transport. However, where transport proteins can respond to stimuli in their surroundings, creation of synthetic receptors with stimuli-responsive functions poses a major challenge. Herein, we give a full overview of the stimulus-controlled anion receptors that have been developed thus far, including their application in membrane transport. In addition to their potential operation as membrane carriers, the use of anion recognition motifs in forming responsive membrane-spanning channels is discussed. With this review article, we intend to increase interest in transmembrane transport among scientists working on host-guest complexes and dynamic functional systems in order to stimulate further developments.

Cooperativity in Photofoldamer Chloride Double Helices Turned On with Sequences and Solvents, Around with Guests, and Off with Light

Photofoldamers are sequence-defined receptors capable of switching guest binding on and off. When two foldamer strands wrap around the guest into 2:1 double helical complexes, cooperativity emerges, and with it comes the possibility to switch cooperativity with light and other stimuli. We use lessons from nonswitchable sequence isomers of aryl-triazole foldamers to guide how to vary the sequence location of azobenzenes from the end (F_END) to the interior (F_IN) and report their impact on the cooperative formation of 2:1 complexes with Cl^-. This sequence change produces a 125-fold increase from anti-cooperative (α = 0.008) for F_END to non-cooperative with F_IN (α = 1.0). Density functional theory (DFT) studies show greater H-bonding and a more relaxed double helix for F_IN. The solvent and guest complement the synthetic designs. Use of acetonitrile to enhance solvophobicity further enhances cooperativity in F_IN (α = 126) but lowers the difference in cooperativity between sequences. Surprisingly, the impact of the sequence on cooperativity is inverted when the guest size is increased from Cl^- (3.4 Å) to BF₄^- (4.1 Å). While photoconversion of interior azobenzenes was poor, the cis-cis isomer forms 1:1 complexes around chloride consistent with switching cooperativity. The effect of the guest, solvent, and light on the double-helix cooperativity depends on the sequence.

Recent Advancements in Ion-Pair Receptors

Over the past two decades, non-covalent chemistry has introduced various promising artificial receptors and revolutionized the host-guest chemistry. These versatile receptors have particularly been entertained in sensing and recognizing of diverse neutral molecules and/or ionic entities (e. g. anions, cations and ion-pair) of particular interest. Notably, supramolecular chemistry had given birth to a plethora of important molecules, explored in the chemical, biological, environmental, and pharmacological world to resolve the critical issues related to the human health while keeping environmental concerns in mind. Amongst the various types of supramolecular monotopic receptors (anions, cations, and neutral molecules), heteroditopic receptors (ion-pair receptors) consisting of distinct binding sites in one system for both cation and anion, have gained much interest from the scientific community in recent past because of their unique binding abilities. Interestingly, these promising artificial receptors have shown potential applications in sensing, recognition, transport and extraction processes besides their uses in salt/waste purification. Bearing the importance of these systems in mind, we intended to report the recent developments in ion-pair chemistry. Herein, we divided the whole document into three main sections; first one describes the introduction and history of the ion-pairs receptors. The second portion highlights the synthesis and applications of ion-pair receptors in sensing, recognition, molecular machines, photoswitching behaviour, extraction and transport properties, whereas the last part of this manuscript provides concluding remarks as well as future prospects of ion-pair receptors. We hope that this manuscript will be helpful to stimulating researchers around the globe to find out the hidden opportunities in this and related areas.

Light-controlled shape-changing azomacrocycles exhibiting reversible modulation of pyrene fluorescence emission

We report the design, synthesis, and study of light-induced shape-changing azomacrocycles. These systems have been incorporated with azobenzene photoswitches using alkoxy tethers and triazole units to afford flexibility and binding. We envision that such azomacrocycles are capable of reversibly binding with the guest molecule. Remarkably, we have demonstrated fully light-controlled fluorescence quenching and enhancement in the monomeric emission of pyrene (guest). Such modulations have been achieved by the photoisomerization of the azomacrocycle and, in turn, host-guest interactions. Also, the azomacrocycles tend to aggregate and can also be controlled by light or heat. We uncovered such phenomena using spectroscopic, microscopic, and isothermal titration calorimetry (ITC) studies and computations.

Bis[squaramido]ferrocenes as electrochemical sulfate receptors

The bis[squaramido]ferrocene scaffold is introduced and shown to selectively bind and electrochemically report sulfate in competitive water/DMSO mixtures.