Rare earth orthovanadate (REM-VO4; REM = Pr, Gd, and Sm)-based sensors for selective and simultaneous detection of furazolidone and metronidazole

Antibiotics are vital tools in the fight against bacterial infections, with furazolidone (FD) and metronidazole (MD) being widely used to target pathogens like G. lamblia and H. pylori. However, overuse of these antibiotics can lead to serious health complications, highlighting the urgent need for accurate, real-time detection of these drugs at precise levels. In this study, we explore the use of differential pulse voltammetry (DPV) for detecting FD and MD with high sensitivity, employing a dual detection method. To enhance detection, we developed a sensor using rare earth metal-based orthovanadates (REM-VO4, where REM = Pr, Gd, and Sm) as electrode modifiers. These materials offer exceptional surface control, boosting the sensor's sensitivity and selectivity. Among the different configurations, the SmVO4-modified glassy carbon electrode (SmV/GCE) stands out, demonstrating the lowest charge transfer resistance (Rct = 56.82 Ω) and the largest electrochemical surface area (A = 0.11 cm2). SmVO4's unique nanostructure, with its high electrochemically active surface area and hollow structure, is key to its impressive performance. This sensor not only provides the lowest limits of detection (0.0009 μM for FD and 0.0036 μM for MD individually, and 0.0015 μM and 0.0049 μM for simultaneous detection) but also shows excellent anti-interference, repeatability, and reproducibility. Furthermore, SmV/GCE has been successfully applied for real-time analysis of biological and environmental samples, offering recoveries between 97.33 to 99.60%, demonstrating its practical potential for precise antibiotic monitoring.

Green light-responsive photoelectrochemical sensing nanoplatform based on copper cobaltite nanorods for ultrasensitive detection of furazolidone antibiotic residue in food samples

In this research, the preparation of copper cobaltite (CuCo2O4) nanorods and its potential application in photoelectrochemical sensing platform towards ultrasensitive detection of furazolidone are reported. X-ray diffraction, Raman spectra, scanning electron microscopy, and UV-visible spectroscopy have been performed to confirm the formation, morphology, phase composition, and optical properties of CuCo2O4 synthesized by a microwave-assisted hydrothermal method. The electrochemical characteristic parameters were calculated via electrochemical impedance spectroscopy, cyclic voltammetry, differential pulse voltammetry, and chronoamperometry techniques in the absence and presence of laser light irradiation. The CuCo2O4-based photoelectrochemical sensing platform with laser light irradiation exhibited outstanding electrochemical performance compared to without laser light irradiation with sensitivity for furazolidone detection of 1.11 μA μM-1 cm-2 within the linear ranges of 0.25 to 200 μM, and detection limit of 0.03 μM, due to CuCo2O4 nanorods having a narrow energy gap, a low recombination ratio of electron-hole pairs, and multiple valence states (Co2+/Co3+ and Cu2+/Cu3+) structure. In addition, the proposed CuCo2O4-based photoelectrochemical sensor with light assistance showed good repeatability, anti-interfering capability, long-term stability, and real applicability in honey and milk samples.

Fmoc-Pro-Phe-OMe dipeptide carbon sensor for simultaneous detection of chloramphenicol (CP) and furazolidone (FZ) toxic residues in food samples

In this work, we fabricated the Fmoc-Pro-Phe-OMe modified carbon paste electrode (FPPO/MCPE) and used it for electrochemical detection of CP and FZ in a 0.1 M phosphate buffer solution (pH = 7). We characterized the Fmoc-Pro-Phe-OMe and applied it for the electrochemical detection of CP and FZ. The Mass spectroscopy, 1HNMR, and FTIR measurements confirm the Fmoc-Pro-Phe-OMe chemical structure. Studying electrochemical sensor characteristics, variation of scan rate parameters, and electrode surface area is crucial for understanding and optimizing the performance of modified and unmodified carbon paste electrodes. The FPPO/MCPE-modified carbon paste electrode has better sensing capabilities than the unmodified bare carbon paste electrode (BCPE). The FPPO/MCPE sensor has two linear ranges: 50-450 μM (CP) with a detection limit of 0.014 μM and 50-450 μM (FZ) with a detection limit of 0.015 μM. The FPPO/MCPE sensor is highly sensitive, measuring 4.25 µA/µM/cm2 for CP and 4.1 µA/µM/cm2 for FZ. Scan rate and concentration tests demonstrate that the oxidation of CP and FZ is a diffusion-controlled electrode process. The FPPO/MCPE sensor also demonstrates excellent repeatability, reproducibility, stability, and selectivity for detection of CP and FZ. The use of FPPO/MCPE-sensor is demonstrated for the detection of FZ and CP in milk and honey samples.

Cu2MoS4 Nanocatalyst-Based Electrochemical Sensor for Ofloxacin Electro-Oxidation: Delineating the Combined Roles of Crystallinity and Morphology on the Analytical Performance

In this study, we demonstrate the influence of crystallinity and morphology on the analytical performance of various Cu2MoS4 (CMS) nanocatalysts-based electrochemical sensors for the high-efficiency detection of Ofloxacin (OFX) antibiotic. The electrochemical kinetics parameters including peak current response (ΔIp), peak-to-peak separation (ΔEp), electrochemically active surface area (ECSA), electron-transfer resistance (Rct), were obtained through the electrochemical analyses, which indicate the single-crystalline nature of CMS nanomaterials (NMs) is beneficial for enhanced electron-transfer kinetics. The morphological features and the electrochemical results for OFX detection substantiate that by tuning the tube-like to plate-like structures of the CMS NMs, it might noticeably enhance multiple adsorption sites and more intrinsic active catalytic sites due to the diffusion of analytes into the interstitial spaces between CMS nanoplates. As results, highly single-crystalline and plate-shaped morphology structures of CMS NMs would significantly enhance the electrocatalytic OFX oxidation in terms of onset potential (Eonset), Tafel slope, catalytic rate constant (kcat), and adsorption capacity (Γ). The CMS NMs-based electrochemical sensing platform showed excellent analytical performance toward the OFX detection with two ultra-wide linear detection concentration ranges from 0.25-100 and 100-1000 μM, a low detection limit of 0.058 μM, and an excellent electrochemical sensitivity (0.743 μA μM-1 cm-2).

In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone

The over-exploitation of antibiotics in food and farming industries ruined the environmental and human health. Consequently, electrochemical sensors offer significant advantages in monitoring these compounds with high accuracy. Herein, MOF-derived hollow Co3S4@MoS2 (CS@MS) heterostructure has been prepared hydrothermally and applied to fabricate an electrochemical sensor to monitor nitrofuran class antibiotic drug. Various spectroscopic methodologies have been employed to elucidate the structural and morphological information. Our prepared electrocatalyst has better electrocatalytic performance than bare and other modified glassy carbon electrodes (GCE). Our CS@MS/GCE sensor exhibited a highly sensitive detection by offering a low limit of detection, good sensitivity, repeatability, reproducibility, and stability results. In addition, our sensor has shown a good selectivity towards the target analyte among other potential interferons. The practical reliability of the sensor was measured by analyzing various real-time environmental and biological samples and obtaining good recovery values. From the results, our fabricated CS@MS could be an active electrocatalyst material for an efficient electrochemical sensing application.

An on-site and portable electrochemical sensing platform based on spinel zinc ferrite nanoparticles for the quality control of paracetamol in pharmaceutical samples

In this study, crystalline spinel zinc ferrite nanoparticles (ZnFe2O4 NPs) were successfully prepared and proposed as a high-performance electrode material for the construction of an electrochemical sensing platform for the detection of paracetamol (PCM). By modifying a screen-printed carbon electrode (SPE) with ZnFe2O4 NPs, the electrochemical characteristics of the ZnFe2O4/SPE and the electrochemical oxidation of PCM were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and differential pulse voltammetry (DPV) methods. The calculated electrochemical kinetic parameters from these techniques including electrochemically active surface area (ECSA), peak-to-peak separation (ΔEp), charge transfer resistance (Rct), standard heterogeneous electron-transfer rate constants (k0), electron transfer coefficient (α), catalytic rate constant (kcat), adsorption capacity (Γ), and diffusion coefficient (D) proved that the as-synthesized ZnFe2O4 NPs have rapid electron/mass transfer characteristics, intrinsic electrocatalytic activity, and facilitate the adsorption-diffusion of PCM molecules towards the modified electrode surface. As expected, the ZnFe2O4/SPE offered excellent analytical performance towards sensing of PCM with a detection limit of 0.29 μM, a wide linear range of 0.5-400 μM, and high electrochemical sensitivity of 1.1 μA μM-1 cm-2. Moreover, the proposed ZnFe2O4-based electrochemical nanosensor also exhibited good repeatability, high anti-interference ability, and practical feasibility toward PCM sensing in a pharmaceutical tablet. Based on these observations, the designed electrochemical platform not only provides a high-performance nanosensor for the rapid and highly efficient detection of PCM but also opens a new avenue for routine quality control analysis of pharmaceutical formulations.

Laccase-Conjugated Nanostructured ZnFe2O4/rGO-Modified Electrode-Based Interfaces for Electrochemical Impedance Monitoring of Adrenaline: A Promising Biosensor for Management of Neurodegenerative Disorders

A propitious biosensor for adrenaline (AD) detection in bovine serum albumin (BSA) real samples, which can be used for diagnosis and treatment of neurodegenerative disorders, is reported here. The biosensor consists of a La/ZF/rGO/ITO bioelectrode, which is fabricated by electrophoretic deposition of zinc ferrite/reduced graphene oxide (ZF/rGO) nanohybrid followed by drop casting of laccase (La) enzymes. The material characterization and electrochemical studies revealed that the ZF/rGO nanohybrid enhanced the electroactive surface and facilitated direct electron transfer between the electrode and electrolyte interface, resulting in enhanced electrocatalytic performance. The cyclic voltammetry and electrochemical impedance spectroscopy results asserted that the ZF/rGO nanohybrid decreased the charge-transfer resistance (Rct) and increased the surface adsorption, leading to a high diffusion coefficient (D) of 0.192 cm2/s. The biosensor exhibited a high sensitivity of 0.71 Ω/μM cm2, a good linear range (0.1 to 140 μM with R2 = 0.98), and a low limit of detection (LOD) is 12.5 μM, demonstrating the synergic effect of ZF and rGO in the La/ZF/rGO/ITO bioelectrode with AD. The biosensor also exhibited high selectivity and stability (55 days) in the presence of interfering substances and in BSA samples, with a recovery percentage close to 100 ± 5% RSD, indicating its potential biosensing applications for real-world applications in disease diagnostics, monitoring, and treatment.

An insight of light-enhanced electrochemical kinetic behaviors and interfacial charge transfer of CuInS2/MoS2-based sensing nanoplatform for ultra-sensitive detection of chloramphenicol

Owing to the effective combination between MoS₂ sheets with CuInS₂ nanoparticles (NPs), a direct Z-scheme heterojunction was successfully constructed and proved as a promising structure to modify the working electrode surface with the aim of enhancing overall sensing performance towards CAP detection. Herein, MoS₂ was employed as a high mobility carrier transport channel with a strong photo-response, large specific surface area, and high in-plane electron mobility, while CuInS₂ acted as an efficient light absorber. This not only offered a stable nanocomposite structure but also created impressive synergistic effects of high electron conductivity, large surface area, highlight exposure interface, as well as favorable electron transfer process. Moreover, the possible mechanism and hypothesis of the transfer pathway of photo-induced electron-hole pairs on the CuInS₂-MoS₂/SPE as well as their impacts on the redox reaction of K₃/K₄ probes and CAP were proposed and investigated in detail via a series of calculated kinetic parameters, demonstrating the high practical applicability of light-assisted electrodes. Indeed, the detection concentration range of the proposed electrode was widened from 0.1 to 50 μM, compared with that of 1-50 μM without irradiation. Also, the LOD and sensitivity values were calculated to be approximately 0.06 μM and 0.4623 μA μM^-1, which is better than that of 0.3 μM and 0.095 μA μM^-1 without irradiation.

Unveiling the effect of crystallinity and particle size of biogenic Ag/ZnO nanocomposites on the electrochemical sensing performance of carbaryl detection in agricultural products

In this study, bio-Ag/ZnO NCs were synthesized via a microwave-assisted biogenic electrochemical method using mangosteen (Garcinia mangostana) peel extract as a biogenic reducing agent for the reduction of Zn2+ and Ag+ ions to form hybrid nanoparticles. The as-synthesized NC samples at three different microwave irradiation temperatures (Z 70, Z 80, Z 90) exhibited a remarkable difference in size and crystallinity that directly impacted their electrocatalytic behaviors as well as electrochemical sensing performance. The obtained results indicate that the Z 90 sample showed the highest electrochemical performance among the investigated samples, which is attributed to the improved particle size distribution and crystal microstructure that enhanced charge transfer and the electroactive surface area. Under the optimal conditions for carbaryl pesticide detection, the proposed nanosensor exhibited a high electrochemical sensitivity of up to 0.303 μA μM-1 cm-2 with a detection limit of LOD ∼0.27 μM for carbaryl pesticide detection in a linear range of 0.25-100 μM. Overall, the present work suggests that bio-Ag/ZnO NCs are a potential candidate for the development of a high-performance electrochemical-based non-enzymatic nanosensor with rapid monitoring, cost-effectiveness, and eco-friendly to detect carbaryl pesticide residues in agricultural products.

Enhancing catalytic activity through the construction of praseodymium tungstate decorated on hierarchical three-dimensional porous biocarbon for determination of furazolidone in aquatic samples

Boosting catalytic performance as a vital role for an electrochemical sensor for monitoring various hazardous nitro drugs. Herein, an inexpensive, facile, and eco-friendly construction of praseodymium tungstate decorated on three dimensional porous biocarbon (PrW/3D-PBC) for electrochemical determination of carcinogenic residue furazolidone (FZ). The nanostructured PrW nanoparticles were prepared by solvent evaporation from peroxo-tungstic acid and 3D-PBC was prepared from biomass precursor under the carbonization method. Furthermore, the composite of PrW decorated on 3D-PBC was prepared by an ultrasonic-assisted wet chemical approach. Besides, the composite characterization of crystalline, functional group, degree of carbonization, chemical states, and morphology were utilized by theXRD, FTIR, RAMAN, XPS, and FESEM analysis. These 3D porous carbon decorated PrW nanoparticles facilitate the electrochemical anchoring sites, surface area, and ease of diffusion layers towards the detection of hazardous nitro pollutant FZ by using CV analysis. The low LOD and high sensitivity were achieved by FZ determination through using LSV and DPV techniques. The practical capability of the PrW/3D-PBC/GCE sensor was determined by using aquatic samples to achieve a good recovery result. These results instigate that the PrW/3D-PBC will be an efficient electrocatalytic material for FZ sensor in environmental aquatic samples.

GO/ZnO nanocomposite - as transducer platform for electrochemical sensing towards environmental applications

Graphene Oxide-Zinc Oxide (GO-ZnO) - a new nanomaterial that has queued the interest of researchers. Their intriguing promising physical and electrochemical features of electrode material have led to its widespread use in electrochemical sensor applications. GO-ZnO based nanomaterial were extensively exploited in the construction of electrochemical sensors due to their adaptability and distinct qualities. On understanding the structural role of these materials, their modification processes are critical for realizing their full potential. The advancement of technology on new concepts and strategies has revolutionized the field of sensor devices with high sensitivities and selectivity. These tools can test a range of contaminants quickly, accurately, and affordably while performing automated chemical analysis in complicated matrices. This paper highlights the electrochemical transducer surface for sensing various analytes and current research activity on GO-ZnO nanocomposite. Additionally, we talked about current developments in GO-ZnO nanostructured composites to identify relevant analytes (i.e., Nitrophenols, Antibiotic Drugs, Biomolecules). While being used in the laboratory, the majority of produced systems have proven to bring about excellent gains. Their monitoring application still has a long way to go before it is fixed due to problems like technological advancements and multifunctional strategies to get around the challenges for improving the sensing systems.

Green synthesis of ZnFe2O4@ZnO nanocomposites using Chrysanthemum spp. floral waste for photocatalytic dye degradation

The occurrence of textile dyeing wastewater discharged into the environment has been recently increasing, resulting in harmful effects on living organisms and human health. The use of green nanoparticles for water decontamination has received much attention. Floral waste can be extracted with the release of natural compounds, which act as reducing and stabilizing agents during the biosynthesis of nanoparticles. Herein, we report the utilization of Chrysanthemum spp. floral waste extract to synthesize green ZnFe₂O₄@ZnO (ZFOZx) nanocomposites for the photocatalytic degradation of Congo red under solar light irradiation. The various molar ratio of ZnFe₂O₄ (0-50%) was incorporated into ZnO nanoparticles. The surface area of green ZFOZx nanocomposites was found to increase (7.41-42.66 m² g^-1) while their band gap energy decreased from 1.98 eV to 1.92 eV. Moreover, the results exhibited the highest Congo red dye degradation efficiency of 94.85% at a concentration of 5.0 mg L^-1, and a catalyst dosage of 0.33 g L^-1. The ^•O₂^- reactive species played a vital role in the photocatalytic degradation of Congo red dye. Green ZFOZ3 nanocomposites had good recyclability with at least three cycles, and an excellent stability. The germination results showed that wastewater treated by ZFOZ3 was safe enough for bean seed germination. We expect that this work contributes significantly to developing novel green bio-based nanomaterials for environmental remediation as well as reducing the harm caused by flower wastes.

Elucidating the roles of oxygen functional groups and defect density of electrochemically exfoliated GO on the kinetic parameters towards furazolidone detection

Using electrochemically exfoliated graphene oxide (GO)-modified screen-printed carbon electrodes for the detection of furazolidone (FZD), a nitrofuran antibiotic, was explored. In this study, we designed some GO samples possessing different oxygen functional group content/defect density by using ultrasonic irradiation or microwave techniques as supporting tools. The difference in physical characteristics of GO led to the remarkable change in kinetic parameters (electron transfer rate constant (k_s) and transfer coefficient (α)) of electron transfer reactions at K₃/K₄ probes as well as the FZD analyte. Obtained results reveal that the GO-ultrasonic sample showed the highest electrochemical response toward FZD detection owing to the increase in defect density and number of edges in the GO nanosheets under ultrasonic irradiation. The proposed electrochemical nanosensor enabled the monitoring of FZD in the linear range from 1 μM to 100 μM with an electrochemical sensitivity of 1.03 μA μM⁻¹ cm⁻². Tuning suitable electronic structures of GO suggests the potentiality of advanced GO-based electrochemical nanosensor development in food-producing animal safety monitoring applications.

In this study, we have investigated the role of changes in the microstructure of graphene oxide (GO) on the analytical kinetic parameters of GO-based electrochemical sensors for detection of furazolidone (FZD) antibiotic drug.