Phosphorene quantum dots: synthesis, properties and catalytic applications

Heterogeneous Interface Engineering of 2D Black Phosphorus-Based Materials for Enhanced Photocatalytic Performance

Photocatalysis has garnered significant attention as a sustainable approach for energy conversion and environmental management. 2D black phosphorus (BP) has emerged as a highly promising semiconductor photocatalyst owing to its distinctive properties. However, inherent issues such as rapid recombination of photogenerated electrons and holes severely impede the photocatalytic efficacy of single BP. The construction/stacking mode of BP with other nanomaterials decreases the recombination rate of carriers and extend its functionalities. Herein, from the perspective of atomic interface and electronic interface, the enhancement mechanism of photocatalytic performance by heterogeneous interface engineering is discussed. Based on the intrinsic properties of BP and corresponding photocatalytic principles, the effects of diverse interface characteristics (point, linear, and planar interface) and charge transfer mechanisms (type I, type II, Z-scheme, and S-scheme heterojunctions) on photocatalysis are summarized systematically. The modulation of heterogeneous interfaces and rational regulation of charge transfer mechanisms can enhance charge migration between interfaces and even maximize redox capability. Furthermore, research progress of heterogeneous interface engineering based on BP is summarized and their prospects are looked ahead. It is anticipated that a novel concept would be presented for constructing superior BP-based photocatalysts and designing other 2D photocatalytic materials.

Temperature-dependent charge carrier behavior in phosphorene quantum dots probed by terahertz time-domain spectroscopy

Although phosphorene quantum dots (PQDs) have gained significant attention in optoelectronics and physics due to their unique optical responses, the low-frequency electromagnetic properties of PQDs and the effects of temperature still remain largely unexplored. Herein, we investigate the temperature-dependent terahertz (THz) response of PQDs by using THz time-domain spectroscopy. Effective THz conductivity of the PQD sample is extracted based on THz measurements to analyze the charge carrier behavior. It is shown that the carriers in the PQDs can be approximated as a weakly confined Drude gas of classical and noninteracting charge particles, which are described by the modified Drude-Smith formula. Then, we also obtain the temperature dependences of the effective characteristic parameters for the charge carriers. As the temperature increases, the plasma frequency linearly enhances whereas both of the carrier diffusion time and the momentum scattering time decrease, which are akin to conventional semiconductors to a large extent. In addition, the confinement factor is closed to 1 and nearly insensitive to temperature. These results are helpful to gain an in-depth understanding of the low-frequency electromagnetic response of charge carriers in PQDs and to explore new applications in photonics and optoelectronics.

Innovative Phosphorene Nanoplatform for Light Antimicrobial Therapy

Over the past few years, antibiotic resistance has reached global dimensions as a major threat to public health. Consequently, there is a pressing need to find effective alternative therapies and therapeutic agents to combat drug-resistant pathogens. Photodynamic therapy (PDT), largely employed as a clinical treatment for several malignant pathologies, has also gained importance as a promising antimicrobial approach. Antimicrobial PDT (aPDT) relies on the application of a photosensitizer able to produce singlet oxygen (1O2) or other cytotoxic reactive oxygen species (ROS) upon exposure to appropriate light, which leads to cell death after the induced photodamage. Among different types of 2D nanomaterials with antimicrobial properties, phosphorene, the exfoliated form of black phosphorus (bP), has the unique property intrinsic photoactivity exploitable for photothermal therapy (PTT) as well as for PDT against pathogenic bacteria.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Towards the Future of Polymeric Hybrids of Two-Dimensional Black Phosphorus or Phosphorene: From Energy to Biological Applications

With the advent of a new 2D nanomaterial, namely, black phosphorus (BP) or phosphorene, the scientific community is now dedicated to focusing on and exploring this 2D material offering elusive properties such as a higher carrier mobility, biocompatibility, thickness-dependent band gap, and optoelectronic characteristics that can be harnessed for multiple applications, e.g., nanofillers, energy storage devices, field effect transistors, in water disinfection, and in biomedical sciences. The hexagonal ring of phosphorus atoms in phosphorene is twisted slightly, unlike how it is in graphene. Its unique characteristics, such as a high carrier mobility, anisotropic nature, and biocompatibility, have attracted much attention and generated further scientific curiosity. However, despite these interesting features, the phosphorene or BP poses challenges and causes frustrations when it comes to its stability under ambient conditions and processability, and thus in order to overcome these hurdles, it must be conjugated or linked with the suitable and functional organic counter macromolecule in such a way that its properties are not compromised while providing a protection from air/water that can otherwise degrade it to oxides and acid. The resulting composites/hybrid system of phosphorene and a macromolecule, e.g., a polymer, can outperform and be exploited for the aforementioned applications. These assemblies of a polymer and phosphorene have the potential for shifting the paradigm from exhaustively used graphene to new commercialized products offering multiple applications.

Nanoarchitectonics of neomycin-derived fluorescent carbon dots for selective detection of Fe3+ ions

The first-ever neomycin antibiotic-based carbon dots (Neo-CDs) were synthesized via a low-cost, eco-friendly, and single-step hydrothermal method using neomycin as a single precursor. The as-prepared Neo-CDs exhibited strong and stable blue fluorescence and were well characterized by TEM, UV-vis absorption, fluorescence emission, IR, XRD, Raman and XPS spectroscopy methods. The Neo-CDs showed a well-distributed size within the range of 4.5 to 7.8 nm, comprising various functional groups on the surface of the carbon core. The Neo-CDs exhibited exceptional emission behaviour, and fluorescence quantum yield was calculated to be 55% in double distilled water. Neo-CDs have been used as a fluorescent sensor for selective and sensitive detection of Fe³⁺ ions in aqueous solution in the fluorescence turn-off mode. From the set of metal ions, only the Fe³⁺ ion showed quenching of fluorescence due to photoinduced (PET) electron transfer from Neo-CDs to the half-filled 3d orbital of Fe³⁺ ions. The limit of detection for Fe³⁺ ions was calculated to be 0.854 μM. Further, the quenching efficiency and Stern-Volmer quenching constant have been calculated which are about 94% and 5.6 × 10⁶ M^-1, respectively.

Research Update of Emergent Sulfur Quantum Dots in Synthesis and Sensing/Bioimaging Applications

Due to their unique optical property, low toxicity, high hydrophilicity, and low cost, sulfur quantum dots (SQDs), an emerging luminescent nanomaterial, have shown great potential in various application fields, such as sensing, bioimaging, light emitting diode, catalysis, and anti-bacteria. This minireview updates the synthetic methods and sensing/bioimaging applications of SQDs in the last few years, followed by discussion of the potential challenges and prospects in their synthesis and sensing/bioimaging applications, with the purpose to provide some useful information for researchers in this field.