Lightweight Copolymerized Polyimide Foams Containing Trifluoromethyl and Siloxane Moieties for Thermal Insulation and Hydrophobic Applications

Lightweight porous materials with integrated cushioning and shock absorption, excellent thermal insulation, and hydrophobicity demonstrate a broad application prospect in high-end engineering sectors. Herein, the fabrication of lightweight polyimide foams (PIFs) containing trifluoromethyl and siloxane moieties was proposed by adopting copolymerization and microwave-assisted foaming processes. The synthesis and preparation of fluorine- and silicon-containing polyester ammonium salt (PEAS) precursor powders and subsequent PIFs, as well as the relationship and mechanism between structure and properties, were systematically explored. The construction of the anisotropic pore structure was attributed to the "bottom-up" directional foaming behavior of the microwave-assisted foaming process, which endowed PIFs with different traits with respect to the pore growth direction. The resulting copolymerized PIFs displayed low density (18.3-27.7 kg/m3), enhanced mechanical flexibility (compressive strength improvement of 26.2%, compression response rate between 97.5 and 99.1%), excellent thermal stability (T5% > 485.2 °C), and thermal insulation performance. Combining the micro/nano pore structure with the presence of hydrophobic trifluoromethyl and siloxane moieties, PIFs exhibited exceptional hydrophobicity with the water contact angle, reaching as high as 145.9° in the vertical direction (parallel to pore growth direction) and 136.3° in the horizontal direction (perpendicular to pore growth direction). Therefore, lightweight, mechanically flexible, thermally insulating, and hydrophobic PIFs were successfully prepared by the proposed approach, which demonstrate potential applications in the aerospace, transportation, microelectronics, and nuclear energy sectors, among others.

New (Co)poly(hydroxyimide)s Based on 4,4'-Oxydiphthalic Anhydride-Effect of Composition on Properties, Including Gas Transport Ability

This paper presents novel soluble (co)poly(hydroxyimide)s ((co)PIOH) based on 4,4'-oxydiphthalic anhydride (ODPA), 3,3'-dihydroxybenzidine (HAB), and 3,6-diaminodurene (D) with the 3/1, 1/1, and 1/3 HAB/D ratios. This chemical structure of the compounds provides the possibility of their future modification through the thermal rearrangement (polybenzoxazoles) or functionalization via Mitsunobu reaction (azo side-chain polyimides), i.e., obtaining new materials with interesting properties and therefore with expanded applications. Copolymers were characterized via FTIR, NMR, XRD, and GPC methods to confirm their structure, composition, and molar masses. The effect of copolymer composition on the thermal, mechanical, optical, and permeation properties studied for He, O2, N2, and CO2, as well as hydrophobicity, was investigated. They exhibited a large interval between the glass transition temperature and the decomposition temperature, making them promising for the thermoforming technique. Transmittance above 90% was noted in the visible range for all (co)PIOH films deposited on a glass substrate. Young's modulus of fabricated membranes was in the range of 2.37 to 3.38 GPa. The highest permeability coefficients were recorded for (co)PIOH with a 1:3 HAB-to D-ratio.

Facile fabrication of shape-controllable and reusable nanoporous catalytic aerogels based on Co-MOF and agarose for efficient decomposition of organic pollutants in water

Sulfate radical (SO4•-)-based advanced oxidation processes (SR-AOPs) have been studied to date by utilizing metal-organic frameworks as efficient catalysts to generate sulfate radicals by peroxymonosulfate (PMS) activation in water purification. It is important to select high-performance and reliable catalysts for efficient water remediation, and separation and recovery of catalysts are essential in the practical application of MOFs. Herein, we adapted thermally curable, shape-controllable, and cost-effective agarose (AG) as a smart matrix and ZIF-67, as a powerful catalyst to prepare nanoarchitectured aerogel (Z67@AG). This nanoporous aerogel composite can efficiently generate sulfate radicals and hydroxyl radicals by activating PMS in the nanopores. Z67@AG aerogel could be easily fabricated in various molds to make desired shapes. This approach enables its utilization for different filtering systems and demonstrates cost-effective and stable performance by mass production and reusability. In the SR-AOP, aerogel exhibited excellent catalytic decomposition performances of 95 % and 88 % efficiencies within 8 and 10 min for dye and levofloxacin, respectively. It is believed that the proposed highly catalytic nanoporous aerogel nanocomposite having cost-effectiveness, excellent catalytic activity, facile fabrication of desired shapes, and an excellent porous structure can be extended to the synthesis of various nanocomposites and emerging applications.

Tribofilm Formation of Zinc Dialkyldithiophosphate as Oil Additives Impregnated in Porous Polyimide under Different Contacts

To improve the tribological properties of porous polyimide (PPI), ZDDP-mixed PAO4 was impregnated in PPI (denoted as ZPPI), and the tribological properties of ZPPI under single- and double-contacts were investigated. In the single-contact of ZPPI-steel, a rough and thick tribofilm was formed on the steel ball, which could protect the steel surface but resulted in large fluctuations in the friction coefficient. In the double-contact of ZPPI-steel-steel, ZDDP formed a uniform and thinner tribofilm on steel surfaces, leading to a lower friction. ZDDP could inhibit the formation of iron oxides significantly in the double-contact, while the antioxidant effect of ZDDP in the single-contact of ZPPI-steel was not obvious. ZnS and ZnO generated from ZDDP were adsorbed in the ZPPI pores, which aggravated the blackening of the ZPPI worn surface.

Polyimide covalent organic frameworks bearing star-shaped electron-deficient polycyclic aromatic hydrocarbon building blocks: molecular innovations for energy conversion and storage

Polyimide covalent organic frameworks (PI-COFs) are outstanding functional materials for electrochemical energy conversion and storage owing to their integrated advantages of the high electroactive feature of polyimides and the periodic porous structure of COFs. Nevertheless, only anhydride monomers with C2 symmetry are generally used, and limited selectivity of electron-deficient monomers has become a major obstacle in the development of materials. The introduction of polycyclic aromatic hydrocarbons (PAHs) is a very effective method to regulate the structure-activity relationship of PI-COFs due to their excellent stability and electrical properties. Over the past two years, various star-shaped electron-deficient PAH building blocks possessing different compositions and topologies have been successfully fabricated, greatly improving the monomer selectivity and electrochemical performances of PI-COFs. This paper systematically summarizes the recent highlights in PI-COFs based on these building blocks. Firstly, the preparation of anhydride (or phthalic acid) monomers and PI-COFs related to different star-shaped PAHs is presented. Secondly, the applications of these PI-COFs in energy conversion and storage and the corresponding factors influencing their performance are discussed in detail. Finally, the future development of this meaningful field is briefly proposed.

Chemically Driven Oscillating Soft Pneumatic Actuation

Pneumatic actuators are widely studied in soft robotics as they are facile, low cost, scalable, and robust and exhibit compliance similar to many systems found in nature. The challenge is to harness high energy density chemical and biochemical reactions that can generate sufficient pneumatic pressure to actuate soft systems in a controlled and ecologically compatible manner. This investigation evaluates the potential of chemical reactions as both positive and negative pressure sources for use in soft robotic pneumatic actuators. Considering the pneumatic actuation demands, the chemical mechanisms of the pressure sources, and the safety of the system, several gas evolution/consumption reactions are evaluated and compared. Furthermore, the novel coupling of both gas evolution and gas consumption reactions is discussed and evaluated for the design of oscillating systems, driven by the complementary evolution and consumption of carbon dioxide. Control over the speed of gas generation and consumption is achieved by adjusting the initial ratios of feed materials. Coupling the appropriate reactions with pneumatic soft-matter actuators has delivered autonomous cyclic actuation. The reversibility of these systems is demonstrated in a range of displacement experiments, and practical application is shown through a soft gripper that can move, pick up, and let go of objects. Our approach presents a significant step toward more autonomous, versatile soft robots driven by chemo-pneumatic actuators.

Preparation of novel diperylene-cored polyimide photocatalyst with broad-spectra response and high stability

A novel polyimide (PI) with broad-spectra response, high photocatalytic activity and stability under super acidic conditions (pH = 0) was synthesized via polymerizing method. Two types of perylene-cored materials (PDIAN and PTCDA) with anhydride and diamine respectively, were applied as precursors for PI polymerization. The as-prepared PI was optimized at 1:1 initial molar ratio of PDIAN to PTCDA. Using common PI (synthesized from melamine and pyromellitic dianhydride) as comparison, the Cr(VI) reduction rate was boosted from 25.4% to 96.6% within 120 min light irradiation. The corresponding rate constant by PI(PDIAN/PTCDA) was estimated to be ca. 11.7 times relative to that by common PI. The boosted performance was ascribed to the strong π-π conjugation from diperylene cores, which can decrease the photoluminescence intensity and electrochemical impedance, so as to promote the separation and transfer of photogenerated electron-hole pairs. In addition, the optimized PI(PDIAN/PTCDA) displayed wide-spectra response, which can still work under 730 nm light. The influencing factors toward Cr(VI) reduction were also clarified to be beneficial at lower pH and increased concentration of hole scavenger. After five cycles at pH 0, the PI still maintained excellent redox activity and structural stability.

Selective CO2 Electroreduction from Tuneable Naphthalene-Based Porous Polyimide Networks

A series of porous polyimides (pPIs) are synthesized, and their surface areas and pore sizes are optimized by the previously reported Bristol-X'an-Jiatong (BXJ) approach. How this approach can be used to tune and optimize the porous network properties to target and tune their ability to capture CO₂ is demonstrated. Once optimized, these porous organic frameworks are utilized, for the first time, as electrocatalysts for the conversion of CO₂ . The excellent Faradaic efficiencies (FEs) for the conversion of CO₂ to formate (91%) and methanol (85%) present exciting opportunities for the metal-free generation of useful fuels and feedstocks from CO₂ . In addition, the ability to directly address and select the conversion products through tuning of the porous materials' properties highlights the potential of this approach, and more generally for a wide range of organic frameworks as future metal-free CO₂ reduction catalysts.

Aromatic Polyimide Membranes with tert-Butyl and Carboxylic Side Groups for Gas Separation Applications-Covalent Crosslinking Study

A set of aromatic copolyimides was obtained by reaction of 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), and mixtures of the diamines 1,4-bis(4-amino-2-trifluoromethylphenoxy)-2,5-di-tert-butylbenzene (CF₃TBAPB) and 3,5-diamino benzoic acid (DABA). These polymers were characterized and compared with the homopolymer derived from 6FDA and CF₃TBAPB. All copolyimides showed high molecular weight values and good mechanical properties. The presence of carboxylic groups in these copolymers allowed their chemical crosslinking by reaction with 1,4-butanediol. Glass transition temperatures (Tg) were higher than 260 °C, showing the non-crosslinked copolyimides had the highest Tg values. Degradation temperature of crosslinked copolyimides was lower than their corresponding non-crosslinked ones. Mechanical properties of all polymers were good, and thus, copolyimide (precursor, and crosslinked ones) films could be tested as gas separation membranes. It was observed that CO₂ permeability values were around 100 barrer. Finally, the plasticization resistance of the crosslinked material having a large number of carboxylic groups was excellent.

Redox-active polyimides for energy conversion and storage: from synthesis to application

As the demand for next-generation electronics is increasing, organic and polymer-based semiconductors are in the spotlight as suitable materials owing to their tailorable structures along with flexible properties. Especially, polyimide (PI) has been widely utilised in electronics because of its outstanding mechanical and thermal properties and chemical resistance originating from its crystallinity, conjugated structure and π-π interactions. PI has recently been receiving more attention in the energy storage and conversion fields due to its unique redox activity and charge transfer complex structure. In this review, we focus on the design of PI structures with improved electrochemical and photocatalytic activities for use as redox-active materials in photo- and electrocatalysts, batteries and supercapacitors. We anticipate that this review will offer insight into the utilisation of redox-active PI-based polymeric materials for the development of future electronics.

Recyclable Tough Thermoset with Imide-Hexahydrotriazine Structure

Developing sustainable thermosets is regarded as a major approach to cope with environmental pollution and resource waste, but it still remains a challenge to design recyclable thermosets with exceptional comprehensive...