Polydopamine based photodynamic coating on intraocular lens surface for safer posterior capsule opacification conquering

Photodynamic therapy could serve as a promising approach to prevent posterior capsular opacification

Posterior capsular opacification (PCO) causes the vision that has been restored after cataract surgery to become blurred again. YAG laser treatment for PCO not only incurs additional costs but also poses risks of complications, including glaucoma and retinal disorders. Effective prevention and management of PCO remain an area requiring active research. Photodynamic therapy (PDT) utilizes a photosensitizer (PS) to transform oxygen into reactive oxygen species (ROS) under specific wavelengths of light, thereby inducing apoptosis. Given its minimal invasiveness and high specificity, PDT has been extensively applied in the treatment of conditions characterized by abnormal cell proliferation, such as tumors. Considering the pathogenesis of PCO, PDT has demonstrated promising clinical application potential in ophthalmic disease treatment. This review examines the impact of photodynamic therapy on the biological behavior of lens epithelial cells (LECs) and its efficacy in treating PCO. It also discusses the advantages and disadvantages of different photosensitizers and their clinical application potential.

Knowledge mapping of posterior capsular opacification from 2011 to 2023: A bibliometric analysis

This bibliometric analysis explores the current status and trends of global research on posterior capsular opacification (PCO). A search of the Web of Science Core Collection (WoSCC) database was conducted to identify publications on PCO from 2011 to 2023. Bibliometric analysis was used to explore publication trends in PCO-related research. VOSviewer v.1.6.20 was used to visualize country, institution and author productivity and collaborations, as well as research hotspots. CiteSpace 6.3.R1 was applied to extract the burst references and keywords. A total of 988 PCO-related documents were included. The largest number of publications (283) and citations (3538) were from China. Of these, the largest number of publications (41) and citations (655) were from Wenzhou Medical University. Quankui Lin published 31 articles and was the most productive author. The journal with the highest productivity (121 publications) was the Journal of Cataract and Refractive Surgery. The top 3 cited references mainly presented intraocular lens (IOL) optic material/design and surgical technique on the development of PCO; the mechanism of PCO formation. The keywords mainly formed 5 clusters: the prevalence and risk factors for PCO; the mechanism of PCO formation; the material and design of IOLs and their application in the prevention of PCO; the application of IOLs surface modification and drug delivery in the prevention of PCO; and complications associated with Nd:YAG laser capsulotomy. Based on the raw data from WoSCC, analyzing research hotspots can offer valuable insights into PCO studies.

Biopolymeric Innovations in Ophthalmic Surgery: Enhancing Devices and Drug Delivery Systems

The interface between material science and ophthalmic medicine is witnessing significant advances with the introduction of biopolymers in medical device fabrication. This review discusses the impact of biopolymers on the development of ophthalmic devices, such as intraocular lenses, stents, and various prosthetics. Biopolymers are emerging as superior alternatives due to their biocompatibility, mechanical robustness, and biodegradability, presenting an advance over traditional materials with respect to patient comfort and environmental considerations. We explore the spectrum of biopolymers used in ophthalmic devices and evaluate their physical properties, compatibility with biological tissues, and clinical performances. Specific applications in oculoplastic and orbital surgeries, hydrogel applications in ocular therapeutics, and polymeric drug delivery systems for a range of ophthalmic conditions were reviewed. We also anticipate future directions and identify challenges in the field, advocating for a collaborative approach between material science and ophthalmic practice to foster innovative, patient-focused treatments. This synthesis aims to reinforce the potential of biopolymers to improve ophthalmic device technology and enhance clinical outcomes.

NIR-triggered thermosensitive polymer brush coating modified intraocular lens for smart prevention of posterior capsular opacification

Posterior capsule opacification (PCO) is the most common complication after cataract surgery. Drug-eluting intraocular lens (IOLs) is a promising concept of PCO treatment in modern cataract surgery. However, the large dose of drugs in IOL leads to uncontrollable and unpredictable drug release, which inevitably brings risks of overtreatment and ocular toxicity. Herein, a low-power NIR-triggered thermosensitive IOL named IDG@P(NIPAM-co-AA)-IOL is proposed to improve security and prevent PCO by synergetic controlled drug therapy and simultaneous photo-therapy. Thermosensitive polymer brushes Poly(N-isopropylacrylamide-co-Acrylic acid) (P(NIPAM-co-AA)) is prepared on IOL via surface-initiated reversible addition-fragmentation chain transfer (SI-RAFT) polymerization. Then, Doxorubicin (DOX) and Indocyanine green (ICG) co-loaded Gelatin NPs (IDG NPs) are loaded in P(NIPAM-co-AA) by temperature control. The IDG NPs perform in suit photodynamic & photothermal therapy (PTT&PDT), and the produced heat also provides a trigger for controllable drug therapy with a cascade effect. Such functional IOL shows excellent synergistic drug-phototherapy effect and NIR-triggered drug release behavior. And there is no obvious PCO occurrence in IDG@P(NIPAM-co-AA) IOL under NIR irradiation compared with control group. This proposed IDG@P(NIPAM-co-AA)-IOL serves as a promising platform that combines phototherapy and drug-therapy to enhance the therapeutic potential and medication safety for future clinical application of PCO treatment.

Cascade reaction triggering and photothermal AuNPs@MIL MOFs doped intraocular lens for enhanced posterior capsular opacification prevention

Posterior capsular opacification (PCO) is the most common complication after cataract surgery. Present strategies can't meet the clinical needs of long-term prevention. This research reports a novel intraocular lens (IOL) bulk material with high biocompatibility and synergistic therapy. Gold nanoparticles (AuNPs) doped MIL-101-NH₂ metal-organic frameworks (MOFs) (AuNPs@MIL) was firstly fabricated via in situ reductions. Then the functionalized MOFs were uniformly mixed with glycidyl methacrylate (GMA) and 2-(2-ethoxyethoxy) ethyl acrylate (EA) to form the nanoparticle doped polymer (AuNPs@MIL-PGE), and which was used to fabricate IOL bulk materials. The materials' optical and mechanical properties with different mass contents of nanoparticles are investigated. Such bulk functionalized IOL material could efficiently remove residual human lens epithelial cells (HLECs) in the capsular bag in the short term, and can prevent PCO on demand in the long run by near-infrared illumination (NIR) action. In vivo and in vitro experiments demonstrate the biosafety of the material. The AuNPs@MIL-PGE exhibits excellent photothermal effects, which could inhibit cell proliferation under NIR and doesn't cause pathological effects on the surrounding tissues. Such functionalized IOL can not only avoid the side effects of the antiproliferative drugs but also realize the enhanced PCO prevention in clinical practice.

Design of foldable, responsively drug-eluting polyacrylic intraocular lens bulk materials for prevention of postoperative complications

Posterior capsular opacification (PCO), resulting from undesired intracapsular cell proliferation, is the most common complication of intraocular lens (IOL) implantation after cataract surgery. In recent years, IOLs have been developed into a drug delivery platform. Compared with traditional eye drops, drug-loaded IOLs have the characteristics of independent patient compliance and no other operation except surgical implantation. In this work, a series of poly(glycidyl methacrylate-co-2-(2-ethoxyethoxy)ethyl acrylate) (PGE) acrylic intraocular lens materials were synthesized as drug delivery platforms. The PGE synthesized with 10% crosslinking agent has excellent optical, foldable, and thermomechanical properties. An aldehyde group was subsequently introduced into the PGE chains, and an antiproliferative drug (doxorubicin) was immobilized onto the PGE chains via an H⁺-sensitive imine bond. The IOL exhibits H⁺-dependent Dox release behavior in a simulated pathological environment. The in vitro and in vivo systematical evaluations indicate that such a responsively drug-eluting PGE IOL can effectively prevent PCO.

Rapid and Economical Drug-Eluting IOL Preparation via Thermoresponsive Agarose Coating for Effective Posterior Capsular Opacification Prevention

Posterior capsular opacification (PCO), the highest incidence complication after cataract surgery, is mainly due to the attachment, proliferation, and migration of the residual lens epithelial cells (LECs). Although the drug-eluting IOLs have been proved to be an effective way to prevent PCO incidence, its preparations are time consuming and require tedious preparation steps. Herein, the thermoreversible agarose is adopted to prepare drug-eluting IOL. Such functional coating can be obtained easily by simple immersion in the antiproliferative drug containing hot agarose and taken out for cooling, which not only does not affect the optical property but also can effectively decrease the PCO incidence after intraocular implantation. As a result, the proposed agarose coating provides a rapid and economical alternative of drug-eluting IOL fabrication for PCO prevention.

Research Progress Concerning a Novel Intraocular Lens for the Prevention of Posterior Capsular Opacification

Posterior capsular opacification (PCO) is the most common complication resulting from cataract surgery and limits the long-term postoperative visual outcome. Using Nd:YAG laser-assisted posterior capsulotomy for the clinical treatment of symptomatic PCO increases the risks of complications, such as glaucoma, retinal diseases, uveitis, and intraocular lens (IOL) pitting. Therefore, finding how to prevent PCO development is the subject of active investigations. As a replacement organ, the IOL is implanted into the lens capsule after cataract surgery, but it is also associated with the occurrence of PCO. Using IOL as a medium for PCO prophylaxis is a more facile and efficient method that has demonstrated various clinical application prospects. Thus, scientists have conducted a lot of research on new intraocular lens fabrication methods, such as optimizing IOL materials and design, and IOL surface modification (including plasma/ultraviolet/ozone treatment, chemical grafting, drug loading, coating modification, and layer-by-layer self-assembly methods). This paper summarizes the research progress for different types of intraocular lenses prepared by different surface modifications, including anti-biofouling IOLs, enhanced-adhesion IOLs, micro-patterned IOLs, photothermal IOLs, photodynamic IOLs, and drug-loading IOLs. These modified intraocular lenses inhibit PCO development by reducing the residual intraoperative lens epithelial cells or by regulating the cellular behavior of lens epithelial cells. In the future, more works are needed to improve the biosecurity and therapeutic efficacy of these modified IOLs.

Recent Advances of Intraocular Lens Materials and Surface Modification in Cataract Surgery

Advances in cataract surgery have increased the demand for intraocular lens (IOL) materials. At present, the progress of IOL materials mainly contains further improving biocompatibility, providing better visual quality and adjustable ability, reducing surgical incision, as well as dealing with complications such as posterior capsular opacification (PCO) and ophthalmitis. The purpose of this review is to describe the research progress of relevant IOL materials classified according to different clinical purposes. The innovation of IOL materials is often based on the common IOL materials on the market, such as silicon and acrylate. Special properties and functions are obtained by adding extra polymers or surface modification. Most of these studies have not yet been commercialized, which requires a large number of clinical trials. But they provide valuable thoughts for the optimization of the IOL function.