Recent advances in the design of afterglow materials: mechanisms, structural regulation strategies and applications

Development of smart adhesive using lanthanide-doped phosphor and carboxymethyl cellulose-reinforced gum Arabic

Smart polymer glue with photoluminescence and water-repellent properties was developed. The luminescent adhesive continues emitting light for up to 120 min after turning the excitation source off. Nanoparticles of lanthanide strontium aluminum oxide (LSAO) (8-13 nm) were consistently immobilized into carboxymethyl cellulose-reinforced gum Arabic (CMC/GA) adhesive. Using various concentrations of LSAO, the generated adhesives showed emission intensity at 519 nm and an excitation band at 365 nm. Depending on LSAO content, both of afterglow and fluorescence emission were monitored. Photochromism was detected as the transparent adhesive film changes color to green under ultraviolet irradiation. A greenish-yellow lightening in a darkened place was also observed. The nanocomposite resistance to scratches and hydrophobicity were found to enhance as the LSAO content was increased in the carboxymethyl cellulose-reinforced gum Arabic matrix. The LSAO@CMC/GA nanocomposite showed high durability and photostability. The present strategy proved the viability of a potential mass production toward photoluminescent adhesives for various smart applications, such as smart packaging, anti-counterfeiting printing, smart windows, and safety signs.

Blue Long Afterglow and Ultra Broadband Vis-NIR Emission from All-Inorganic Copper-Doped Silver Halide Single Crystals

All-inorganic metal halides with afterglow emission have attracted increasing attention due to their significantly longer afterglow duration and higher stability compared to their organic-inorganic hybrid counterparts. However, their afterglow colors have not yet reached the blue spectral region. Here, we report all-inorganic copper-doped Rb2AgBr3 single crystals with ultralong blue afterglow (>300 s) by modulating defect states through doping engineering. The introduction of copper(I) ions into Rb2AgBr3 facilitates the formation of bromine vacancies, thus increasing the density of trap states available for charge storage and enabling bright, persistent emission after ceasing the excitation. Moreover, cascade energy transfer between distinct emissive centers in the crystals results in ultra-broadband photoluminescence, not only covering the whole white light with near-unity quantum yield but also extending into the near-infrared region. This 'cocktail' of exotic light-emission properties, in conjunction with the excellent stability of copper-doped Rb2AgBr3 crystals, allowed us to demonstrate their implementation to solid-state lighting, night vision, and intelligent anti-counterfeiting.

Near-infrared afterglow enhancement of ZnGa2O4:Cr3+via regulating trap distribution guided by the VRBE diagram

Lanthanide ions are commonly used as co-dopant ions for trap regulation in afterglow phosphors. However, rationally designing trap distribution to improve the afterglow performance remains challenging. Herein, the vacuum referred binding energy (VRBE) diagram was constructed to aid in the search for effective lanthanide ions to improve the near-infrared afterglow properties of ZnGa2O4:Cr3+. The constructed VRBE diagram indicates that Ln3+ (Ln = Sm, Yb, Tb) ions can create traps in ZnGa2O4, which is confirmed by the luminescence characterization. Results show that doping with Ln3+ (Ln = Sm, Yb, Tb) ions can significantly improve the afterglow intensity and duration of the phosphor due to the increased shallow trap density and trap depth. Among these samples, the Sm3+-doped sample exhibits the best afterglow properties. The afterglow enhancement mechanism by Ln3+ doping is discussed in detail. This work not only presents the lanthanide ions that can be used to regulate the trap distribution of ZnGa2O4:Cr3+ phosphors, but also provides new insights for the design of new afterglow phosphors with practical application value.

Achieving long-lived white circularly polarized luminescence from carbonized polymer dots via phosphorescence resonance energy transfer

Achieving white-light emission, especially long-lived white circularly polarized luminescence, is challenging. Herein, chiral phosphorescent carbonized polymer dots (CPDs) have been prepared by using chiral polymer sodium alginate and chiral small molecule L-lysine as precursors. Benefiting from the efficient triplet-to-singlet phosphorescence resonance energy transfer (PRET), CPD-based long-lived warm white CPL has been achieved for the first time. This study provides a universal strategy for the convenient and efficient preparation of CPD-based long-lived white CPL materials.

Carbon Dots-Inked Paper with Single/Two-Photon Excited Dual-Mode Thermochromic Afterglow for Advanced Dynamic Information Encryption

Achieving thermochromic afterglow (TCAG) in a single material for advanced information encryption remains a significant challenge. Herein, TCAG in carbon dots (CDs)-inked paper (CDs@Paper) is achieved by tuning the temperature-dependent dual-mode afterglow of room temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF). The CDs are synthesized through thermal treatment of levofloxacin in melting boric acid with postpurification via dialysis. CDs@Paper exhibit both TCAG and excitation-dependent afterglow color properties. The TCAG of CDs@Paper exhibits dynamic color changes from blue at high temperatures to yellow at low temperatures by adjusting the proportion of the temperature-dependent TADF and phosphorescence. Notably, two-photon afterglow in CDs-based afterglow materials and time-dependent two-photon afterglow colors are achieved for the first time. Moreover, leveraging the opposite emission responses of phosphorescence and TADF to temperature, CDs@Paper demonstrate TCAG with temperature-sensing capabilities across a wide temperature range. Furthermore, a CDs@Paper-based 3D code containing color and temperature information is successfully developed for advanced dynamic information encryption.

Structure Engineering of Acridine Donor to Optimize Color Purity of Blue Thermally Activated Delayed Fluorescence Emitters

9,9-Dimethyl-9,10-dihydroacridine (DMAC) is one of the most widely used electron donor for constructing high-performance thermally activated delayed fluorescence (TADF) emitters. However, DMAC-based emitters often suffer from the imperfect color purity, particularly in blue emitters, due to its strong electron-donating capability. To modulate donor strength, 2,7-F-Ph-DMAC and 2,7-CF3-Ph-DMAC were designed by introducing the electron-withdrawing 2-fluorophenyl and 2-(trifluoromethyl)phenyl at the 2,7-positions of DMAC. These donors were used, in combination with 2,4,6-triphenyl-1,3,5-triazine (TRZ) acceptor, to develop novel TADF emitters 2,7-F-Ph-DMAC-TRZ and 2,7-CF3-Ph-DMAC-TRZ. Compared to the F- or CF3-free reference emitter, both two emitters showed hypsochromic effect in fluorescence and comparable photoluminescence quantum yields without sacrificing the reverse intersystem crossing rate constants. In particular, 2,7-CF3-Ph-DMAC-TRZ based OLED exhibited a blue shift by up to 39 nm and significantly improved Commission International de l'Éclairage (CIE) coordinates from (0.36, 0.55) to (0.22, 0.41), while the external quantum efficiency kept stable at about 22.5 %. This donor engineering strategy should be valid for improving the color purity of large amount of acridine based TADF emitters. It can be predicted that pure blue TADF emitters should be feasible if these F- or CF3-modifed acridine donors are combined with other weaker electron acceptors.

Graphene nanosheet reinforcement of polyurethane nanocomposite for green and sustainable photoluminescence, superhydrophobic, and anticorrosive paint

A simple and environmentally friendly method was developed for smart and efficient waterborne polyurethane (PUR) paint. Sugarcane bagasse was recycled into reduced graphene oxide nanosheets (rGONSs). Both lanthanide-doped aluminate nanoparticles (LAN; photoluminescent agent, 7-9 nm) and rGONSs (reinforcement agent) were integrated into a waterborne polyurethane to produce a novel photoluminescent, hydrophobic, and anticorrosive nanocomposite coating. Using ferrocene-based oxidation under masked circumstances, graphene oxide nanosheets were produced from sugarcane bagasse. The oxidized semicarbazide (SCB) nanostructures were integrated into polyurethane coatings as a drying, anticorrosion, and crosslinking agent. Polyurethane coatings with varying amounts of phosphor pigment were prepared and subsequently applied to mild steel. The produced paints (LAN/rGONSs@PUR) were tested for their hydrophobicity, hardness, and scratch resistance. Commission Internationale de l'éclairage (CIE) Laboratory parameters and photoluminescence analysis established the opacity and colourimetric properties of the nanocomposite coatings. When excited at 365 nm, the luminescent transparent paints emitted a strong greenish light at 517 nm. The anticorrosion characteristics of the coated steel were investigated. The phosphor-containing (11% w/w) polyurethane coatings displayed the most pronounced anticorrosion capability and long-persistent luminosity. The prepared waterborne polyurethane paints were very photostable and durable.

Tailored Fabrication of Full-Color Ultrastable Room-Temperature Phosphorescence Carbon Dots Composites with Unexpected Thermally Activated Delayed Fluorescence

The development of single-system materials that exhibit both multicolor room-temperature phosphorescence (RTP) and thermally activated delayed fluorescence (TADF) with tunable after glow colors and channels is challenging. In this study, four metal-free carbon dots (CDs) are developed through structural tailoring, and panchromatic high-brightness RTP is achieved via strong chemical encapsulation in urea. The maximum lifetime and quantum yield reaches 2141 ms and 56.55%, respectively. Moreover, CDs-IV@urea, prepared via coreshell interaction engineering, exhibits a dual afterglow of red RTP and green TADF. The degree of conjugation and functional groups of precursors affects the binding interactions of the nitrogen cladding on CDs, which in turn stabilizes triplet energy levels and affects the energy gap between S1 and T1 (ΔEST) to induce multicolor RTP. The enhanced wrapping interaction lowers the ΔEST, promoting reverse intersystem crossing, which leads to phosphorescence and TADF. This strong coreshell interaction fully stabilizes the triplet state, thus stabilizing the material in water, even in extreme environments such as strong acids and oxidants. These afterglow materials are tested in multicolor, time, and temperature multiencryption as well as in multicolor in vivo bioimaging. Hence, these materials have promising practical applications in information security as well as biomedical diagnosis and treatment.

Room-Temperature Phosphorescence Materials Featuring Triplet Hybrid Local Charge Transfer Emission

Room-temperature phosphorescence materials have found important applications in dissolved oxygen sensing, temperature monitoring, anticounterfeiting, etc., because of their prolonged phosphorescence lifetime. However, the known systems mainly utilize the triplet local excited state emission, which is generally less sensitive to microenvironment perturbation. In this work, we designed a series of 4-phenyl-1,8-naphthalimide (NMI) derivatives containing different numbers of carbazole (Cz) units (denoted as NMI-Cz, NMI-2Cz, and NMI-3Cz). Steady state and time-resolved spectroscopy studies determined that the compounds undergo intramolecular through-space charge transfer in solution, yielding a triplet hybrid local charge transfer state. Room-temperature phosphorescence emission was observed in compound-doped poly(methyl methacrylate) thin films upon ammonia treatment. Interestingly, emission from different films exhibited different persistence times. We believe a film-based, time-resolved luminescent ammonia sensor could be developed by making a device of the emissive films as fabricated.

Chiral Aggregation-Induced Emission Carbon Dot-Based Multicolor and Near-Infrared Circularly Polarized Delayed Fluorescence via a Light-Harvesting System

Circularly polarized luminescence (CPL) materials are the research frontier of chiral luminescence. As a kind of luminescent carbon material, carbon dots (CDs) are expected to become excellent candidates for the construction of CPL materials. However, the construction of CD-based circularly polarized afterglow emission, especially multicolor and near-infrared emission, remains a great challenge due to aggregation-caused quenching and the instability of triplet excitons. In this work, we synthesized chiral CDs with aggregation-induced emission using dithiosalicylic acid and l/d-arginine as precursors through a one-step solvothermal method. Notably, the CDs exhibit green delayed fluorescence (DF) in poly(vinyl alcohol) films. Furthermore, multicolor and near-infrared circularly polarized delayed fluorescence is successfully realized via engineering a chiral light-harvesting system in which the CDs with green DF emission act as energy donors and fluorescent dyes with emission colors ranging from yellow to the near infrared serve as energy acceptors.

Dual-Stimuli-Responsive Modulation Organic Afterglow Based on N─H Proton Migration Mechanism

Organic afterglow materials have significant applications in information security and flexible electronic devices with unique optical properties. It is vital but challenging to develop organic afterglow materials possessing controlled output with multi-stimuli-responsive capacity. Herein, dimethyl terephthalate (DTT) is introduced as a strong proton acceptor. The migration direction of N─H protons on two compounds Hs can be regulated by altering the excitation wavelength (Ex) or amine stimulation, thereby achieving dual-stimuli-responsive afterglow emission. When the Ex is below 300 nm, protons migrate to S1-2 DTT , where strong interactions induce phosphorescent emission of Hs, resulting in afterglow behavior. Conversely, when the Ex is above 300 nm, protons interact with the S0 DTT weakly and the afterglow disappears. In view of amine-based compounds with higher proton accepting capabilities, it can snatch proton from S1-2 DTT and redirect the proton flow toward amine, effectively suppressing the afterglow but obtaining a new redshifted fluorescence emission with Δλ over 200 nm due to the high polarity of amine. Moreover, it is successfully demonstrated that the applications of dual-stimuli-responsive organic afterglow materials in information encryption based on the systematic excitation-wavelength-dependent (Ex-De) behavior and amine selectivity detection.

Fused-Ring Pyrrole-Based Near-Infrared Emissive Organic RTP Material for Persistent Afterglow Bioimaging

Organic near-infrared room temperature phosphorescence (RTP) materials offer remarkable advantages in bioimaging due to their characteristic time scales and background noise elimination. However, developing near-infrared RTP materials for deep tissue imaging still faces challenges since the small band gap may increase the non-radiative decay, resulting in weak emission and short phosphorescence lifetime. In this study, fused-ring pyrrole-based structures were employed as the guest molecules for the construction of long wavelength emissive RTP materials. Compared to the decrease of the singlet energy level, the triplet energy level showed a more effectively decrease with the increase of the conjugation of the substituent groups. Moreover, the sufficient conjugation of fused ring structures in the guest molecule suppresses the non-radiative decay of triplet excitons. Therefore, a near-infrared RTP material (764 nm) was achieved for deep penetration bioimaging. Tumor cell membrane is used to coat RTP nanoparticles (NPs) to avoid decreasing the RTP performance compared to traditional coating by amphiphilic surfactants. RTP NPs with tumor-targeting properties show favorable phosphorescent properties, superior stability, and excellent biocompatibility. These NPs are applied for time-resolved luminescence imaging to eliminate background interference with excellent tissue penetration. This study provides a practical solution to prepare long-wavelength and long-lifetime organic RTP materials and their applications in bioimaging.