Crystal phase engineering of Ru for simultaneous selective photocatalytic oxidations and H2 production

Surface Plasmon Resonance-Mediated Photocatalytic H2 Generation

The limited yield of H2 production has posed a significant challenge in contemporary research. To address this issue, researchers have turned to the application of surface plasmon resonance (SPR) materials in photocatalytic H2 generation. SPR, arising from collective electron oscillations, enhances light absorption and facilitates efficient separation and transfer of electron-hole pairs in semiconductor systems, thereby boosting photocatalytic H2 production efficiency. However, existing reviews predominantly focus on SPR noble metals, neglecting non-noble metals and SPR semiconductors. In this review, we begin by elucidating five different SPR mechanisms, covering hot electron injection, electric field enhancement, light scattering, plasmon-induced resonant energy transfer, and photo-thermionic effect, by which SPR enhances photocatalytic activity. Subsequently, a comprehensive overview follows, detailing the application of SPR materials-metals, non-noble metals, and SPR semiconductors-in photocatalytic H2 production. Additionally, a personal perspective is offered on developing highly efficient SPR-based photocatalysis systems for solar-to-H2 conversion in the future. This review aims to guide the development of next-gen SPR-based materials for advancing solar-to-fuel conversion.

Cs3Bi2Br9 nanoparticles decorated C3N4 nanotubes composite photocatalyst for highly selective oxidation of benzylic alcohol

Solar-light driven oxidation of benzylic alcohols over photocatalysts endows significant prospects in value-added organics evolution owing to its facile, inexpensive and sustainable process. However, the unsatisfactory performance of actual photocatalysts due to the inefficient charge separation, low photoredox potential and sluggish surface reaction impedes the practical application of this process. Herein, we developed an innovative Z-Scheme Cs3BiBr9 nanoparticles@porous C3N4 tubes (CBB-NP@P-tube-CN) heterojunction photocatalyst for highly selective benzyl alcohol oxidation. Such composite combining increased photo-oxidation potential, Z-Scheme charge migration route as well as the structural advantages of porous tubular C3N4 ensures the accelerated mass and ions diffusion kinetics, the fast photoinduced carriers dissociation and sufficient photoredox potentials. The CBB-NP@P-tube-CN photocatalyst demonstrates an exceptional performance for selective photo-oxidation of benzylic alcohol into benzaldehyde with 19, 14 and 3 times higher benzylic alcohols conversion rate than those of C3N4 nanotubes, Cs3Bi2Br9 and Cs3Bi2Br9@bulk C3N4 photocatalysts, respectively. This work offers a sustainable photocatalytic system based on lead-free halide perovskite toward large scale solar-light driven value-added chemicals production.

Defects of Metal Halide Perovskites in Photocatalytic Energy Conversion: Friend or Foe?

Photocatalytic solar-to-fuel conversion over metal halide perovskites (MHPs) has recently attracted much attention, while the roles of defects in MHPs are still under debate. Specifically, the mainstream viewpoint is that the defects are detrimental to photocatalytic performance, while some recent studies show that certain types of defects contribute to photoactivity enhancement. However, a systematic summary of why it is contradictory and how the defects in MHPs affect photocatalytic performance is still lacking. In this review, the innovative roles of defects in MHP photocatalysts are highlighted. First, the origins of defects in MHPs are elaborated, followed by clarifying certain benefits of defects in photocatalysts including optical absorption, charge dynamics, and surface reaction. Afterward, the recent progress on defect-related MHP photocatalysis, i.e., CO2 reduction, H2 generation, pollutant degradation, and organic synthesis is systematically discussed and critically appraised, putting emphasis on their beneficial effects. With defects offering peculiar sets of merits and demerits, the personal opinion on the ongoing challenges is concluded and outlining potentially promising opportunities for engineering defects on MHP photocatalysts. This critical review is anticipated to offer a better understanding of the MHP defects and spur some inspiration for designing efficient MHP photocatalysts.

Noble-Metal-Free High-Entropy Alloy Nanoparticles for Efficient Solar-Driven Photocatalytic CO2 Reduction

Metal nanoparticle (NP) cocatalysts are widely investigated for their ability to enhance the performance of photocatalytic materials; however, their practical application is often limited by the inherent instability under light irradiation. This challenge has catalyzed interest in exploring high-entropy alloys (HEAs), which, with their increased entropy and lower Gibbs free energy, provide superior stability. In this study, 3.5 nm-sized noble-metal-free NPs composed of a FeCoNiCuMn HEA are successfully synthesized. With theoretic calculation and experiments, the electronic structure of HEA in augmenting the catalytic CO2 reduction has been uncovered, including the individual roles of each element and the collective synergistic effects. Then, their photocatalytic CO2 reduction capabilities are investigated when immobilized on TiO2. HEA NPs significantly enhance the CO2 photoreduction, achieving a 23-fold increase over pristine TiO2, with CO and CH4 production rates of 235.2 and 19.9 µmol g-1 h-1, respectively. Meanwhile, HEA NPs show excellent stability under simulated solar irradiation, as well high-energy X-ray irradiation. This research emphasizes the promising role of HEA NPs, composed of earth-abundant elements, in revolutionizing the field of photocatalysis.

Twin boundary defect engineering in Au cocatalyst to promote alcohol splitting for coproduction of H2 and fine chemicals

The microstructure of Au metal cocatalyst has been shown to significantly influence its optical and electronic properties. However, the impact of Au defect engineering on photocatalytic activity remains underexplored. In this study, we synthesize different Au-TiO2 composites by in-situ hybridizing face-centered cubic (F-Au) and twin boundary defect Au (T-Au) nanoparticles (NPs) onto the surface of TiO2. We find that T-Au NPs with twin defects serve as highly efficient cocatalysts for converting alcohols into their corresponding aldehydes while also generating H2. The optimized T-Au/TiO2 composite yields an H2 evolution rate of 6850 µmol h-1 g-1 and a BAD formation rate of 6830 µmol h-1 g-1, about 38 times higher than that of blank TiO2. Compared to F-Au/TiO2, the T-Au/TiO2 composite enhances charge separation, extends the lifetime of electrons, and provides more active sites for H2 reduction. The twin defect also improves alcohol reactant adsorption, boosting overall photocatalytic performance. This research paves the way for more studies on defect engineering in metal cocatalysts for enhanced catalytic activities in organic synthesis and H2 evolution.

Photocatalytic hydrogen production from seawater by TiO2/RuO2 hybrid nanofiber with enhanced light absorption

Compared to hydrogen production through pure water photocatalysis, the direct utilization of seawater for hydrogen production aligns better with the principles of sustainable development. Seawater, however, contains impurity ions like Na+ and Cl-, which pose higher demands on photocatalysts. It is widely acknowledged that RuO2 and TiO2 demonstrate excellent stability in seawater. Consequently, this study focuses on the model system of RuO2-modified TiO2 for investigating hydrogen production in simulated seawater. TiO2/RuO2 nanofibers (NFs) were synthesized via a one-step electrospinning method, ensuring intimate contact between the two components. The hydrogen production activity of TiO2/RuO2 NFs in simulated seawater nearly matches that in pure water. Remarkably, RuO2 serves as an oxidation cocatalyst, effectively scavenging holes from the valence band of TiO2 and enhancing the separation efficiency of electrons and holes. Interestingly, Cl- ions, similar to RuO2, contribute to reducing excess holes. This study lays the groundwork for future research into hydrogen production from seawater.

Phase-Controlled Ruthenium Nanocrystals on Colloidal Polydopamine Supports and Their Catalytic Behaviors in Aerobic Oxidation Reactions

The past decade has witnessed rapidly growing interest in noble metal nanostructures adopting unconventional metastable crystal phases. In the case of Ru, chemically synthesized nanocrystals typically form thermodynamically favored hexagonal close-packed (hcp) crystal lattices, whereas it remains significantly more challenging to synthesize Ru nanocrystals in the metastable face-centered cubic (fcc) phase. In this work, we have synthesized polydopamine (PDA)-supported hcp and fcc Ru nanocrystals in a phase-selective manner through one-pot thermal reduction of appropriate Ru(III) precursors in a polyol solvent. Benefiting from the unique surface-adhesion function of PDA, we have been able to grow phase-controlled sub-5 nm Ru nanocrystals directly on colloidal PDA supports without prefunctionalizing the particle surfaces with any molecular linkers or surface-capping ligands. Success in phase-controlled synthesis of capping ligand-free Ru nanocrystals dispersed on the same support material enables us to systematically compare the intrinsic mass-specific and surface-specific activities of fcc and hcp Ru nanocatalysts toward the aerobic oxidation of a chromogenic molecular substrate, 3,3',5,5'-tetramethylbenzidine (TMB), under a broad range of reaction conditions. We use UV-vis absorption spectroscopy to monitor the conversion of the reactant molecules into the one-electron and two-electron oxidation products in real time during Ru-catalyzed oxidation of TMB, which is found to be a mechanistically complex molecule-transforming process involving multiple elementary steps. The apparent reaction rates and detailed kinetic features are observed to be not only intimately related to the crystalline structures of the Ru nanocatalysts but also profoundly influenced by several other critical factors, such as the pH of the reaction medium, the initial concentration of TMB, Ru coverage on the PDA supports, and degree of nanoparticle aggregation.

Recent Advances in Phase-Engineered Photocatalysts: Classification and Diversified Applications

Phase engineering is an emerging strategy for tuning the electronic states and catalytic functions of nanomaterials. Great interest has recently been captured by phase-engineered photocatalysts, including the unconventional phase, amorphous phase, and heterophase. Phase engineering of photocatalytic materials (including semiconductors and cocatalysts) can effectively affect the light absorption range, charge separation efficiency, or surface redox reactivity, resulting in different catalytic behavior. The applications for phase-engineered photocatalysts are widely reported, for example, hydrogen evolution, oxygen evolution, CO₂ reduction, and organic pollutant removal. This review will firstly provide a critical insight into the classification of phase engineering for photocatalysis. Then, the state-of-the-art development of phase engineering toward photocatalytic reactions will be presented, focusing on the synthesis and characterization methodologies for unique phase structure and the correlation between phase structure and photocatalytic performance. Finally, personal understanding of the current opportunities and challenges of phase engineering for photocatalysis will also be provided.