Insights into the alloy/oxide or hydroxide interfaces in Ni-Mo-based electrocatalysts for hydrogen evolution under alkaline conditions

Regulating Mo-based alloy-oxide active interfaces for efficient alkaline hydrogen evolution assisted by hydrazine oxidation

Improving the efficiency of overall water splitting (OWS) is crucial due to the slow four-electron transfer process in the oxygen evolution reaction (OER). The coupling of the thermodynamically favorable hydrazine oxidation reaction (HzOR) with the hydrogen evolution reaction (HER) significantly boosts hydrogen production. A Ru-decorated MoNi/MoO2 micropillar (Ru-MoNi/MoO2) has been synthesized using a hydrothermal followed by reduction annealing. Benefiting from Ru moderating the active interface of Mo-based alloys/oxides and the unique one-dimensional micropillar morphology. The synthesized Ru-MoNi/MoO2 exhibits outstanding bifunctional activity for HER and HzOR, achieving 10 mA cm-2 at merely -13 mV and -34 mV in 1 M KOH and 1 M KOH + 0.5 M N2H4, respectively. Notably, with Ru-MoNi/MoO2 in a dual-electrode setup, only 0.57 V is needed to achieve 50 mA cm-2, demonstrating good stability and facilitating hydrazine-assisted water splitting (OHzS). This work offers insights into the modulation of alloy/metal oxide active interfaces, contributing to the development of efficient bifunctional catalysts for HER and HzOR.

In Situ Construction of Biphasic Boride Electrocatalysts on Dealloyed Bulk Ni-Mo Alloy as Self-Supporting Electrode for Water Splitting at High Current Density

Nickel-molybdenum-boron (Ni-Mo-B)-based catalysts with biphasic interfaces are highly advantageous in bifunctional electrocatalytic activity in alkaline water-splitting. However, it remains an ongoing challenge to obtain porous Ni-Mo alloy substrates that provide stable adhesion to catalysts, ensuring the long-term performance of bifunctional self-supporting electrodes at a high current density. Herein, a porous Ni-Mo alloy substrate was effectively obtained by a cost-effective dealloying process on a commercial Ni-Mo alloy with high-energy crystal planes. Subsequently, the Mo2NiB2/Ni3B bifunctional catalyst was in situ synthesized on this substrate via boriding heat treatment, resulting in outstanding catalytic activity and stability. Density functional theory (DFT) calculations reveal that the abundant biphasic interfaces and surface-reconstructed sites of the Mo2NiB2/Ni3B catalyst can decrease the energy barriers for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Thus, the designed self-supporting electrodes show bifunctional catalytic activity with overpotentials of 151 mV for HER and 260 mV for OER at a current density of 10 mA cm-2. Markedly, the assembled water electrolyzer can be driven up to 10 mA cm-2 at 1.64 V and maintain catalytic activity at a high current density of 1000 mA cm-2 for 100 h. The new strategy is expected to provide a low-cost scheme for designing self-supporting bifunctional electrodes with high activity and excellent stability and contribute to the development of hydrogen energy technology.

Phase-Stabilized Nickel-Molybdenum Electrocatalyst by Samarium Doping for Hydrogen Evolution in Alkaline Water Electrolysis

Although the nickel-molybdenum electrocatalyst exhibits excellent activity in the alkaline hydrogen evolution reaction (HER), its stability is poor mainly due to molybdenum leaching. This work reports that doping samarium into nickel-molybdenum electrocatalyst effectively suppresses molybdenum leaching by forming a stable phase consisting of Sm, Mo, and O elements. The resulting electrode displays no noticeable activity degradation during the long-term testing (> 850 h) under a current density of 500 mA cm-2 in 1 м KOH. This enhanced stability is ascribed to the formation of a robust phase within the HER potential windows in alkaline electrolytes, as evidenced by the Pourbaix diagram. Furthermore, the samarium-modified electrocatalyst exhibits increased activity, with the overpotential decreasing by ≈59 mV from 159 to 100 mV at 500 mA cm-2 compared to the unmodified counterpart. These remarkable properties stem from samarium doping, which not only facilitates the formation of a stable phase to inhibit molybdenum leaching but also adjusts the electronic properties of molybdenum to enhance water dissociation.

Efficient and durable seawater electrolysis with a V2O3-protected catalyst

The ocean, a vast hydrogen reservoir, holds potential for sustainable energy and water development. Developing high-performance electrocatalysts for hydrogen production under harsh seawater conditions is challenging. Here, we propose incorporating a protective V2O3 layer to modulate the microcatalytic environment and create in situ dual-active sites consisting of low-loaded Pt and Ni3N. This catalyst demonstrates an ultralow overpotential of 80 mV at 500 mA cm-2, a mass activity 30.86 times higher than Pt-C and maintains at least 500 hours in seawater. Moreover, the assembled anion exchange membrane water electrolyzers (AEMWE) demonstrate superior activity and durability even under demanding industrial conditions. In situ localized pH analysis elucidates the microcatalytic environmental regulation mechanism of the V2O3 layer. Its role as a Lewis acid layer enables the sequestration of excess OH- ions, mitigate Cl- corrosion, and alkaline earth salt precipitation. Our catalyst protection strategy by using V2O3 presents a promising and cost-effective approach for large-scale sustainable green hydrogen production.

Constructing a 3D Bi2WO6/ZnIn2S4 direct Z-scheme heterostructure for improved photocatalytic CO2 reduction performance

Developing efficient heterojunction photocatalysts with enhanced charge transfer and reduced recombination rates of photogenerated carriers is crucial for harnessing solar energy in the photocatalytic CO2 reduction into renewable fuels. This study employed electrostatic self-assembly techniques to construct a 3D Bi2WO6/ZnIn2S4 direct Z-scheme heterojunctions. The unique 3D structure provided abundant active sites and facilitated CO2 adsorption. Moreover, the optimized Bi2WO6/ZnIn2S4 composite demonstrated an impressive CH4 yield of 19.54 μmol g-1 under 4 h of simulated sunlight irradiation, which was about 8.73 and 16.30-fold higher than pure ZnIn2S4 and Bi2WO6. The observed enhancements in photocatalytic performance are attributed to forming a direct Z-scheme heterojunction, which effectively promotes charge transport and migration. This research introduces a novel strategy for constructing photocatalysts through the synergistic effect of morphological interface modifications.

Design and Development of Sustainable Cu2 (II)- and Mn2 (III)-Embedded Bifunctional Electrocatalysts: Enhanced Hydrogen and Oxygen Generation

Nowadays, environmentally friendly, low-cost-effective, and sustainable electrocatalysts used widely for hydrogen and oxygen evolution reactions have come into the limelight as a new research topic for scientists. This study highlights the preparation of two unique and symmetrical dinuclear Cu (II) and Mn (III) bifunctional catalysts by a facile simple slow evaporation and diffusion route. [C32H24Cu2F4N4O4] (1) and [C32H24Mn2F4N4O4] (2) both have monoclinic (C2/c (15)) crystal systems, with oxidation states +2 and +3, respectively. Prominent SPR peaks at 372 and 412 nm indicate an M-L charge transfer transition in both complexes. The synthesized electrocatalysts display exceptional catalytic activity for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Complex 1 exhibits enhanced hydrogen generation in 0.5 M H2SO4 with a small overpotential of 216 mV at -10 mA cm-2 along with a significantly lower Tafel value of 97 mV/dec compared to Complex 2. Moreover, Complex 1 is highly active for the OER in 1 M KOH with a small Tafel slope of 103 mV/dec and a low overpotential of 340 mV to acquire 10 mA cm-2 current density, compared to Complex 2. Complex 1 and Complex 2 remain stable up to 20 h in acidic electrolyte and up to 36 h and 20 h in the basic electrolyte, respectively.

In Situ Probing the Structure Change and Interaction of Interfacial Water and Hydroxyl Intermediates on Ni(OH)2 Surface over Water Splitting

There is growing acknowledgment that the properties of the electrochemical interfaces play an increasingly pivotal role in improving the performance of the hydrogen evolution reaction (HER). Here, we present, for the first time, direct dynamic spectral evidence illustrating the impact of the interaction between interfacial water molecules and adsorbed hydroxyl species (OHad) on the HER properties of Ni(OH)2 using Au/core-Ni(OH)2/shell nanoparticle-enhanced Raman spectroscopy. Notably, our findings highlight that the interaction between OHad and interfacial water molecules promotes the formation of weakly hydrogen-bonded water, fostering an environment conducive to improving the HER performance. Furthermore, the participation of OHad in the reaction is substantiated by the observed deprotonation step of Au@2 nm Ni(OH)2 during the HER process. This phenomenon is corroborated by the phase transition of Ni(OH)2 to NiO, as verified through Raman and X-ray photoelectron spectroscopy. The significant redshift in the OH-stretching frequency of water molecules during the phase transition confirms that surface OHad disrupts the hydrogen-bond network of interfacial water molecules. Through manipulation of the shell thickness of Au@Ni(OH)2, we additionally validate the interaction between OHad and interfacial water molecules. In summary, our insights emphasize the potential of electrochemical interfacial engineering as a potent approach to enhance electrocatalytic performance.

Heterointerface-Rich Ni3N/WO3 Hierarchical Nanoarrays for Efficient Glycerol Oxidation-Assisted Alkaline Hydrogen Evolution

Glycerol oxidation-assisted water electrolysis has emerged as a cost-effective way of co-producing green hydrogen and HCOOH. Still, preparing highly selective and stable nickel-based metal electrocatalysts remains a challenge. Herein, heterostructure Ni3N/WO3 nanosheet arrays of bifunctional catalysts with large specific surface areas loaded on nickel foam (denoted as Ni3N/WO3/NF) were synthesized. This catalyst was for glycerol oxidation reaction (GOR) and hydrogen evolution reaction (HER) with excellent catalytic performance, a voltage saving of 267 mV compared to oxygen evolution reaction (OER), and a HER overpotential of 104 mV at 100 mA cm-2. The cell voltage in the assembled GOR//HER hybrid electrolysis system reaches 100 mA cm-2 at 1.50 V, 296 mV lower than the potential required for overall water splitting. This work demonstrates that replacing GOR with OER using a cost-effective and highly active Ni-based bifunctional electrocatalyst can make hybrid water electrolysis an energy-efficient, sustainable, and green strategy for hydrogen production.

Graphdiyne/metal oxide hybrid materials for efficient energy and environmental catalysis

Graphdiyne (GDY)-based materials, owing to their unique structure and tunable electronic properties, exhibit great potential in the fields of catalysis, energy, environmental science, and beyond. In particular, GDY/metal oxide hybrid materials (GDY/MOs) have attracted extensive attention in energy and environmental catalysis. The interaction between GDY and metal oxides can increase the number of intrinsic active sites, facilitate charge transfer, and regulate the adsorption and desorption of intermediate species. In this review, we summarize the structure, synthesis, advanced characterization, small molecule activation mechanism and applications of GDY/MOs in energy conversion and environmental remediation. The intrinsic structure-activity relationship and corresponding reaction mechanism are highlighted. In particular, the activation mechanisms of reactant molecules (H2O, O2, N2, etc.) on GDY/MOs are systemically discussed. Finally, we outline some new perspectives of opportunities and challenges in developing GDY/MOs for efficient energy and environmental catalysis.

Ultrafine Ru nanoparticles stabilized by V8C7/C for enhanced hydrogen evolution reaction at all pH

The development of cost-effective electrocatalysts with high efficiency and long durability for hydrogen evolution reaction (HER) remains a great challenge in the field of water splitting. Herein, we design an ultrafine and highly dispersed Ru nanoparticles stabilized on porous V8C7/C matrix via pyrolysis of the metal-organic frameworks V-BDC (BDC: 1,4-benzenedicarboxylate). The obtained Ru-V8C7/C composite exhibits excellent HER performance in all pH ranges. At the overpotential of 40 mV, its mass activity is about 1.9, 4.1 and 9.4 times higher than that of commercial Pt/C in acidic, neutral and alkaline media, respectively. Meanwhile, Ru-V8C7/C shows the remarkably high stability in all pH ranges which, in particular, can maintain the current density of 10 mA cm-2 for over 150 h in 1.0 mol L-1 phosphate buffer saline (PBS). This outstanding HER performance can be attributed to the high intrinsic activity of Ru species and their strong interface interactions to the V8C7/C substrate. The synergistic effect of abundant active sites on the surface and the formed Ru-C-V units at the interface promotes the adsorption of reaction intermediates and the release of active sites, contributing the fast HER kinetics. This work provides a reference for developing versatile and robust HER catalysts by surface and interface regulation for pH tolerance.

Remodeling the Electronic Structure of Metallic Nickel and Ruthenium via Alloying in a Molecular Template for Sustainable Hydrogen Evolution

The reasonably constructed high-performance electrocatalyst is crucial to achieve sustainable electrocatalytic water splitting. Alloying is a prospective approach to effectively boost the activity of metal electrocatalysts. However, it is a difficult subject for the controllable synthesis of small alloying nanostructures with high dispersion and robustness, preventing further application of alloy catalysts. Herein, we propose a well-defined molecular template to fabricate a highly dispersed NiRu alloy with ultrasmall size. The catalyst presents superior alkaline hydrogen evolution reaction (HER) performance featuring an overpotential as low as 20.6 ± 0.9 mV at 10 mA·cm-2. Particularly, it can work steadily for long periods of time at industrial-grade current densities of 0.5 and 1.0 A·cm-2 merely demanding low overpotentials of 65.7 ± 2.1 and 127.3 ± 4.3 mV, respectively. Spectral experiments and theoretical calculations revealed that alloying can change the d-band center of both Ni and Ru by remodeling the electron distribution and then optimizing the adsorption of intermediates to decrease the water dissociation energy barrier. Our research not only demonstrates the tremendous potential of molecular templates in architecting highly active ultrafine nanoalloy but also deepens the understanding of water electrolysis mechanism on alloy catalysts.

Interfacial engineering of POM-stabilized Ni quantum dots on porous titanium mesh for high-rate and stable alkaline hydrogen production

The development of low-cost, high-efficiency, and stable electrocatalysts for the alkaline hydrogen evolution reaction (HER) is a key challenge because the alkaline HER kinetics is slowed by an additional water dissociation step. Herein, we report an interfacial engineering strategy for polyoxometalate (POM)-stabilized nickel (Ni) quantum dots decorated on the surface of porous titanium mesh (POMs-Ni@PTM) for high-rate and stable alkaline hydrogen production. Benefiting from the strong interfacial interactions among POMs, Ni atoms, and PTM substrates, as well as unique POM-Ni quantum dot structures, the optimized POMs-Ni@PTM electrocatalyst exhibits a remarkable alkaline HER performance with an overpotential (η10) of 30.1 mV to reach a current density of 10 mA cm-2, which is much better than those of bare Ni decorated porous titanium mesh (Ni@PTM) (η10 = 171.1 mV) and POM decorated porous titanium mesh (POMs@PTM) electrocatalysts (η10 = 493.6 mV), comparable to that of the commercial 20 wt% platinum/carbon (20% Pt/C) electrocatalyst (η10 = 20 mV). Moreover, the optimized POMs-Ni@PTM electrocatalyst demonstrates excellent stability under continuous alkaline water-splitting at a current density of ∼100 mA cm-2 for 100 h, demonstrating great potential for its practical application.

Triggering efficient reconstructions of Co/Fe dual-metal incorporated Ni hydroxide by phosphate additives for electrochemical hydrogen and oxygen evolutions

Alkaline electrochemical water splitting has been considered as an efficient way for the green hydrogen production in industry, where the electrocatalysts play the critical role for the electricity-to-fuel conversion efficiency. Phosphate salts are widely used as additives in the fabrication of electrocatalysts with improved activity, but their roles on the electrocatalytic performance have not been fully understood. Herein, we fabricate Co, Fe dual-metal incorporated Ni hydroxide on Ni foam using NaH2PO4 ((Co, Fe)NiOxHy-pi) and NaH2PO2 ((Co, Fe)NiOxHy-hp) as additive, respectively. We find that (Co, Fe)NiOxHy-hp with NaH2PO2 in the fabrication shows high activity and stability for both HER and OER (a overpotential of -0.629 V and 0.65 V at 400 mA cm-2 for HER and OER, respectively). Further experiment reveals that the reconstructed structures of electrocatalyst by using NaH2PO2 (hp) endow high electrocatalytic performances: (1) in-situ generated active metal improves the accumulation, transportation and activity of hydrogen species in the HER process; and (2) in-situ generated poor-crystalline hydroxide endows superior charge/mass transportation and kinetics improvements in the OER process. Our study may provide an insightful understanding on the catalytic performance of non-precious metal electrocatalysts by controlling additives and guidance for the design and synthesis of novel electrocatalysts.

Crystalline/Amorphous Mo-Ni(OH)2/FexNiy(OH)3x+2y hierarchical nanotubes as efficient electrocatalyst for overall water splitting

The development of efficient bifunctional catalysts for overall water splitting is highly desirable and essential for the advancement of hydrogen technology. In this work, Mo-Ni(OH)2/FexNiy(OH)3x+2y with hierarchical nanotube structure is constructed on flexible carbon cloth (CC) through simple electrochemical deposition and hydrothermal method. The hollow tube-structure is in favor of both exposing active sites and enhancing mass transfer capability. Moreover, the doping of Mo can enhance the electronic conductivity of heterostructures. The interfacial interaction between amorphous and crystal can enhance effectively the charge transfer kinetics across the interface. Therefore, Mo-Ni(OH)2/FexNiy(OH)3x+2y can achieve a low overpotential of 57 mV for hydrogen evolution reaction (HER) and 229 mV for oxygen evolution reaction (OER) at 10 mA·cm-2. In addition, Mo-Ni(OH)2/FexNiy(OH)3x+2y needs a potential of only 1.54 V at 10 mA·cm-2 for overall water splitting, and retains for a long period of time (60 h) reliable. The work will provide a valuable approach to the construction of highly efficient electrocatalysts for overall water splitting.

Enhanced Electrochemical Hydrogenation of Benzaldehyde to Benzyl Alcohol on Pd@Ni-MOF by Modifying the Adsorption Configuration

Electrocatalytic hydrogenation (ECH) approaches under ambient temperature and pressure offer significant potential advantages over thermal hydrogenation processes but require highly active and efficient hydrogenation electrocatalysts. The performance of such hydrogenation electrocatalysts strongly depends not only on the active phase but also on the architecture and surface chemistry of the support material. Herein, Pd nanoparticles supported on a nickel metal-organic framework (MOF), Ni-MOF-74, are prepared, and their activity toward the ECH of benzaldehyde (BZH) in a 3 M acetate (pH 5.2) aqueous electrolyte is explored. An outstanding ECH rate up to 283 μmol cm-2 h-1 with a Faradaic efficiency (FE) of 76% is reached. Besides, higher FEs of up to 96% are achieved using a step-function voltage. Materials Studio and density functional theory calculations show these outstanding performances to be associated with the Ni-MOF support that promotes H-bond formation, facilitates water desorption, and induces favorable tilted BZH adsorption on the surface of the Pd nanoparticles. In this configuration, BZH is bonded to the Pd surface by the carbonyl group rather than through the aromatic ring, thus reducing the energy barriers of the elemental reaction steps and increasing the overall reaction efficiency.

Te-doped-WSe2/W as a stable monolith catalyst for ampere-level current density hydrogen evolution reaction

The development of efficient electrocatalysts for the hydrogen evolution reaction (HER) holds immense importance in the context of large-scale hydrogen production from water. Nevertheless, the practical application of such catalysts still relies on precious platinum-based materials. There is a pressing need to design high-performing, non-precious metal electrocatalysts capable of generating hydrogen at substantial current levels. We report here a stable monolith catalyst of Te-doped-WSe2 directly supported by a highly conductive W mesh. This catalyst demonstrates outstanding electrocatalytic performance and stability in acidic electrolytes, especially under high current conditions, surpassing the capabilities of commercial 5% Pt/C catalysts. Specifically, at current densities of 10 and 1200 mA cm-2, it exhibits a minimal overpotential of 79 and 232 mV, along with a small Tafel slope of 55 mV dec-1, respectively. The remarkable catalytic activity of Te-WSe2 can be attributed to the exceptional electron transfer facilitated by the stable monolithic structure, as well as the abundant and efficient active sites in the material. In addition, density functional theory calculations further indicate that Te doping adjusts H atom adsorption on various positions of WSe2, making it closer to thermal neutrality compared to the original material. This study presents an innovative approach to develop cost-effective HER electrocatalysts that perform optimally under high current density conditions.

Heterogeneous Co-Ni phosphide with active sites for water dissociation and efficient hydrogen evolution reaction

The construction of highly active and stable transition phosphide-based materials is widely regarded as an alternative approach to the use of Pt-based catalysts in the field of electrocatalytic hydrogen evolution. Herein, self-supported heterostructure Co-Ni phosphides (denoted as CoxNi1-x-P) were synthesized with different metal ratios by a low temperature electrodeposition strategy. Impressively, the optimized heterogeneous Co0.5Ni0.5-P nanocomposites displayed outstanding hydrogen evolution performance, with low overpotentials of 67 mV and 181 mV to deliver current densities of 10 mA cm-2 and 100 mA cm-2 in alkaline electrolyte. X-ray photoelectron spectroscopy revealed the optimized electronic structure of Co0.5Ni0.5-P, which led to an improvement in the conductivity. Density functional theory calculations demonstrated that the Co0.5Ni0.5-P heterostructure could provide a more optimal water-dissociation-related Volmer process for hydrogen evolution reaction (HER), in which water molecules could be easily activated on Co0.5Ni0.5-P with a low energy barrier. Moreover, the downshift of the d-band center confirmed the optimized H adsorption, further accelerating the HER kinetics.

Copious Dislocations Defect in Amorphous/Crystalline/Amorphous Sandwiched Structure P-NiMoO4 Electrocatalyst toward Enhanced Hydrogen Evolution Reaction

The design and synthesis of efficient, inexpensive, and long-term stable heterostructured electrocatalysts with high-density dislocations for hydrogen evolution reaction in alkaline media and seawater are still a great challenge. An amorphous/crystalline/amorphous sandwiched structure with abundant dislocations were synthesized through thermal phosphidation strategies. The dislocations play an important role in the hydrogen evolution reactions. Copious dislocation defects, combined with cracks, and the synergistic interfacial effect between crystalline phase and amorphous phase regulate the electronic structure of electrocatalyst, provide more active sites, and thus endow the electrocatalysts with excellent catalytic activity under alkaline water and seawater. The overpotentials of P-NiMoO4 at 10 mA/cm2 in 1 M KOH aqueous solution and seawater are 45 and 75 mV, respectively. Additionally, the P-NiMoO4 electrocatalyst exhibits long-term stability over 100 h. This study provides a simple approach for synthesizing amorphous/crystalline/amorphous sandwiched non-noble-metal electrocatalysts with abundant dislocations for hydrogen evolution reaction.

Constructing Symmetry-Mismatched RuxFe3-xO4 Heterointerface-Supported Ru Clusters for Efficient Hydrogen Evolution and Oxidation Reactions

Ru-related catalysts have shown excellent performance for the hydrogen evolution reaction (HER) and hydrogen oxidation reaction (HOR); however, a deep understanding of Ru-active sites on a nanoscale heterogeneous support for hydrogen catalysis is still lacking. Herein, a click chemistry strategy is proposed to design Ru cluster-decorated nanometer RuxFe3-xO4 heterointerfaces (Ru/RuxFe3-xO4) as highly effective bifunctional hydrogen catalysts. It is found that introducing Ru into nanometric Fe3O4 species breaks the symmetry configuration and optimizes the active site in Ru/RuxFe3-xO4 for HER and HOR. As expected, the catalyst displays prominent alkaline HER and HOR performance with mass activity much higher than that of commercial Pt/C as well as robust stability during catalysis because of the strong interaction between the Ru cluster and the RuxFe3-xO4 support, and the optimized adsorption intermediate (Had and OHad). This work sheds light on a promsing approach to improving the electrocatalysis performance of catalysts by the breaking of atomic dimension symmetry.

Enabling Ultrafine Ru Nanoparticles with Tunable Electronic Structures via a Double-Shell Hollow Interlayer Confinement Strategy toward Enhanced Hydrogen Evolution Reaction Performance

Engineering of the catalysts' structural stability and electronic structure could enable high-throughput H2 production over electrocatalytic water splitting. Herein, a double-shell interlayer confinement strategy is proposed to modulate the spatial position of Ru nanoparticles in hollow carbon nanoreactors for achieving tunable sizes and electronic structures toward enhanced H2 evolution. Specifically, the Ru can be anchored in either the inner layer (Ru-DSC-I) or the external shell (Ru-DSC-E) of double-shell nanoreactors, and the size of Ru is reduced from 2.2 to 0.9 nm because of the double-shell confinement effect. The electronic structures are efficiently optimized thereby stabilizing active sites and lowering the reaction barrier. According to finite element analysis results, the mesoscale mass diffusion can be promoted in the double-shell configuration. The Ru-DSC-I nanoreactor exhibits a much lower overpotential (η10 = 73.5 mV) and much higher stability (100 mA cm-2). Our work might shed light on the precise design of multishell catalysts with efficient refining electrostructures toward electrosynthesis applications.

Transition Metal Functionalized C30N12S6 as High-Performance Trifunctional Catalysts with Integrated Descriptors toward Hydrogen Evolution, Oxygen Evolution, and Oxygen Reduction Reactions: A Case of High-Throughput First-Principles Screening within the Framework of TM-N2@C30N10S6

In energy conversion and storage technologies, the design of highly efficient trifunctional electrocatalysts integrating with the high hydrogen evolution reaction (HER) and oxygen evolution/reduction reaction (OER/ORR) activities is highly desirable. Herein, utilizing first-principles computations, a novel periodically ordered macropore C30N12S6 monolayer was proposed, and the stability analysis attests to its good stability. Single transition metal (TM) atom anchored onto this newly proposed C30N12S6 monolayer to form single-atom catalysts, as achieved by TM-N2@C30N10S6, among which the Co-N2@C30N10S6 is the most promising multifunctional catalyst toward HER/OER/ORR with low overpotential of 0.01/0.59/0.3 V; meanwhile, the Rh-N2@C30N10S6 can be used as a bifunctional OER/ORR catalyst with low overpotential of 0.37/0.44 V, overmatching the landmark Pt (111) and IrO2/RuO2 catalysts. Particularly, the TM-d orbital in TM@CNS is remarkably hybridized with the O-p orbital of oxygenated intermediates, so that the lone electrons initially located at the antibonding orbital pair up and fill the downward bonding orbital, allowing OH* to be suitably adsorbed on TM@CNS, enhancing the catalytic performance. The relevant attributes, such as good stabilities and metallic features, ensured their applications in ambient conditions. Moreover, multilevel descriptors were constructed to clarify the origin of activity on TM@CNS, such as ΔGOH* (Gibbs free energy of OH*), εd (d-band center), COHP (crystal orbital Hamilton population), Nd/Nd + s (number of d/d + s electrons) and φ (descriptor), among which the filling of outer d-electrons of TM atom significantly affects the value of ΔGOH* that can determine the overpotential and, thus, become a key descriptor.

Decorating Thermodynamically Stable (101) Facets of TiO2 with MoO3 for Multifunctional Sustainable Hydrogen Energy and Ammonia Gas Sensing Applications

The simultaneous realization of sustainable energy and gas sensors dealing with the emission of pollutants is indispensable as the former thrives on the minimization of the latter. However, there is a dearth of multifunctional nanocatalysts in the literature. This ascertains the importance of multifunctional semiconductors which can be utilized in H2 generation via overall water splitting and in the gas sensing of global pollutants such as NH3. MoO3-decorated TiO2 Z-scheme heterostructures exceptionally escalate the photochemical and photo/electrochemical H2 evolution performance and gas sensing response of TiO2 owing to the synergistic relationship between TiO2 and MoO3. Extensive structural, morphological, and optical characterizations, theoretical studies, and XPS results were exploited to develop a mechanistic framework of photochemical H2 evolution. The photochemical response of the optimum TiO2-MoO3 composition (20 wt % MoO3-TiO2) was found to be nearly 12- and 20-fold superior to the pristine TiO2 and MoO3 photocatalysts, respectively, with the remarkable H2 evolution rate of 9.18 mmol/g/h and AQY of 36.02%. In addition, 20 wt % MoO3-TiO2 also showed advanced photo/electrochemical efficiency with 0.61/0.7 V overpotential values toward HER due to the higher electrochemically active surface area and Tafel slope as low as 65 mV/dec. The gas sensing response of 20 wt % MoO3-TiO2 toward NH3 gas turned out to be 2.5-fold higher than that of the pristine TiO2 gas sensor.

Fe-induced crystalline-amorphous interface engineering of a NiMo-based heterostructure for enhanced water oxidation

Engineering heterostructures with a unique surface/interface structure is one of the effective strategies to develop highly active noble-metal-free catalysts for the oxygen evolution reaction (OER), because the surface/interface of catalysts is the main site for the OER. Herein, we design a coralloid NiMo(Fe)-20 catalyst with a crystalline-amorphous interface through combining a hydrothermal method and an Fe-induced surface reconfiguration strategy. That is, after Fe3+ impregnation treatment, the Ni(OH)2-NiMoO4 pre-catalyst with a complete crystalline surface is restructured into a trimetallic heterostructure with a crystalline-amorphous interface, which facilitates mass diffusion and charge transfer during the OER. As expected, self-supported NiMo(Fe)-20 exhibits excellent electrocatalytic water oxidation performance (overpotential: η-10 = 220 mV, η-100 = 239 mV) in the alkaline electrolyte, and its electrocatalytic performance hardly changes after maintaining the current density of 50 mA cm-2 for 10 hours. Furthermore, nickel foam (NF) supported commercial Pt/C and self-supported NiMo(Fe)-20 served as the cathode and anode of the Pt/C‖NiMo(Fe)-20 electrolyzer, respectively, which exhibits a lower cell voltage (E-100 = 1.53 V) than that of the Pt/C‖RuO2 electrolyzer (E-100 = 1.58 V) assembled with noble metal-based catalysts. The enhanced electrocatalytic performance of the NiMo(Fe)-20 catalyst is mainly attributed to the synergistic effect between the crystalline-amorphous interface and the coralloid trimetallic heterostructure.

Enhanced electrocatalytic hydrogen evolution from nitrogen plasma-tailored MoS2 nanostructures

Two-dimensional (2D) layered transition metal dichalcogenides such as MoS2 have been viewed as the most favorable candidates for replacing noble metals in catalyzing the hydrogen evolution reaction in water splitting owing to their earth abundance, superb chemical stability, and appropriate Gibbs free energy. However, due to its low number of catalytic sites and basal catalytic inertia, the pristine MoS2 displayed intrinsically unsatisfactory HER catalytic activity. Here, the hydrogen evolution catalytic activities of nanostructured MoS2 powder before and after plasma modification with nitrogen doping were experimentally compared, and the influence of treatment parameters on the hydrogen evolution catalytic performance of MoS2 has been studied. The feasibility of regulating hydrogen evolution catalytic activity by nitrogen doping of MoS2 was verified based on density functional theory calculations. Our work demonstrates a more convenient and faster way to develop cheap and efficient MoS2-based catalysts for electrochemical hydrogen evolution reactions. Additionally, theoretical studies reveal that N-doped MoS2 exhibits strong hybridization between Mo-d and N-p states, causing magnetism to evolve, as confirmed by experiments.

Structural, mechanical, electronic and optical properties of N-decorated single-walled silicon carbide nanotube photocatalyst for hydrogen evolution via water splitting: a DFT study

This work investigates the fundamental photocatalytic properties of nitrogen-doped single-walled silicon carbide nanotubes (N-doped SWSiCNTs) for hydrogen evolution for the first time. Investigations of the structural, mechanical, electronic, and optical properties of the studied systems were carried out using popular density functional theory implemented in quantum ESPRESSO and Yambo codes. Analysis of the structural properties revealed high mechanical stability with the 3.6% and 7.4% N-doped SWSiCNT. The calculated band gap of the N-doped SWSiCNT with 3.6% demonstrated a value of 2.56 eV which is within the photocatalytic range of 2.3 eV-2.8 eV. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) potentials of the 3.6% N-doped SWSiCNT also showed good agreement with previous theoretical data. The studied material showed the best photocatalytic performance in both parallel and perpendicular directions by absorbing photons in the visible region. Therefore, the observed structural, mechanical, electronic and optical behaviors demonstrated by the 3.6% N-doped SWSiCNT exposed it as a better photocatalyst for hydrogen production under visible light.

High-Performance Hydrogen Evolution Reaction Catalysts in Two-Dimensional Nodal Line Semimetals

The discipline of topological quantum catalysts (TQCs) is developing due to the emergence of exotic quantum materials and their corresponding catalysts. Although a series of 3D TQCs with different topological signatures are proposed, the emergence of 2D TQCs in 2D topological semimetals is still rarely touched by others. As a typical example, we proposed that the 2D nodal line semimetal Cu2Si monolayer is a superior TQC for hydrogen evolution reaction (HER). Using first-principles calculations, we find that the Cu2Si monolayer exhibits two Γ-centered nodal lines (L1 and L2) in the kz = 0 plane. The Gibbs free energy (ΔGH*) of Cu2Si is as low as 0.195 eV, comparable to that of Pt, and better than other conventional catalysts. Moreover, it is found that changing the position of nodal lines (relative to the Fermi level) under different electron/hole conditions can effectively affect the catalytic activity of HER. Besides Cu2Si, the emergence of high HER performance in other 2D nodal line semimetals, Ti3C2, Cr2S3, ScCl, and CuSe, is also theoretically determined. These results highlight the critical role of nodal lines in studying electrocatalytic mechanisms for TQCs and benefit the seeking of high-performance HER catalysts without noble metals on a 2D scale.

DFT Studies of the Photocatalytic Properties of MoS2-Doped Boron Nitride Nanotubes for Hydrogen Production

This study investigated the photocatalytic properties of MoS2-doped boron nitride nanotubes (BNNTs) for overall water splitting using popular density functional theory (DFT). Calculations of the structural, mechanical, electronic, and optical properties of the investigated systems were performed using both the generalized gradient approximation and the GW quasi-particle correction methods. In our calculations, it was observed that only (10, 10) and (12, 12) single-walled BNNTs (SWBNNTs) turned out to be stable toward MoS2 doping. Electronic property calculations revealed metallic behavior of (10, 10)-MoS2-doped SWBNNTs, while the band gap of (12, 12) SWBNNT was narrowed to 2.5 eV after MoS2 doping, which is within the obtained band gaps for other photocatalysts. Hence, MoS2 influences the conduction band of pure BNNT and improves its photocatalytic properties. The water-splitting photocatalytic behavior is found in (12, 12) MoS2-doped SWBNNT, which showed higher water oxidation (OH-/O2) and reduction (H+/H2) potentials. In addition, optical spectral calculations showed that MoS2-doped SWBNNT had an optical absorption edge of 2.6 eV and a higher absorption in the visible region. All of the studied properties confirmed MoS2-doped SWBNNT as a better candidate for next-generation photocatalysts for hydrogen evolution through the overall water-splitting process.

Construction of Highly Active and Selective Molecular Imprinting Catalyst for Hydrogenation

Surface molecular imprinting (MI) is one of the most efficient techniques to improve selectivity in a catalytic reaction. Heretofore, a prerequisite to fabricating selective catalysts by MI strategies is to sacrifice the number of surface-active sites, leading to a remarkable decrease of activity. Thus, it is highly desirable to design molecular imprinting catalysts (MICs) in which both the catalytic activity and selectivity are significantly enhanced. Herein, a series of MICs are prepared by sequentially adsorbing imprinting molecules (nitro compounds, N) and imprinting ligand (1,10-phenanthroline, L) over the copper surface of Cu/Al2O3. The resulting Cu/Al2O3-N-L MICs not only offer promoted catalytic selectivity but also enhance catalytic activity for nitro compounds hydrogenation by an creating imprinting cavity derived from the presorption of N and forming new active Cu-N sites at the interface of the copper sites and L. Characterizations by means of various experimental investigations and DFT calculations disclose that the molecular imprinting effect (promoted activity and selectivity) originates from the formation of new active Cu-N sites and precise imprinting cavities, endowing promoted catalytic selectivity and activity on the hydrogenation of nitro compounds.

Effective Hydrogen Production from Alkaline and Natural Seawater using WO3-x@CdS1-x Nanocomposite-Based Electrocatalysts

Offshore hydrogen production through water electrolysis presents significant technical and economic challenges. Achieving an efficient hydrogen evolution reaction (HER) in alkaline and natural seawater environments remains daunting due to the sluggish kinetics of water dissociation. To address this issue, we synthesized electrocatalytic WO3-x@CdS1-x nanocomposites (WCSNCs) using ultrasonic-assisted laser irradiation. The synthesized WCSNCs with varying CdS contents were thoroughly characterized to investigate their structural, morphological, and electrochemical properties. Among the samples tested, the WCSNCs with 20 wt % CdS1-x in WO3-x (Wx@Sx-20%) exhibited superior electrocatalytic performance for hydrogen evolution in a 1 M KOH solution. Specifically, the Wx@Sx-20% catalyst demonstrated an overpotential of 0.191 V at a current density of -10 mA/cm2 and a Tafel slope of 61.9 mV/dec. The Wx@Sx-20% catalysts demonstrated outstanding stability and durability, maintaining their performance after 24 h and up to 1000 CV cycles. Notably, when subjected to natural seawater electrolysis, the Wx@Sx-20% catalysts outperformed in terms of electrocatalytic HER activity and stability. The remarkable performance enhancement of the prepared electrocatalyst can be attributed to the combined effect of sulfur vacancies in CdS1-x and oxygen vacancies in WO3-x. These vacancies promote the electrochemically active surface area, enhance the rate of charge separation and transfer, increase the number of electrocatalytic active sites, and accelerate the HER process in alkaline and natural seawater environments.

MoS2-Based Nanocomposites for Photocatalytic Hydrogen Evolution and Carbon Dioxide Reduction

Photocatalysis is a facile and sustainable approach for energy conversion and environmental remediation by generating solar fuels from water splitting. Due to their two-dimensional (2D) layered structure and excellent physicochemical properties, molybdenum disulfide (MoS₂) has been effectively utilized in photocatalytic H₂ evolution reaction (HER) and CO₂ reduction. The photocatalytic efficiency of MoS₂ greatly depends on the active edge sites present in their layered structure. Modifications like reducing the layer numbers, creating defective structures, and adopting different morphologies produce more unsaturated S atoms as active edge sites. Hence, MoS₂ acts as a cocatalyst in nanocomposites/heterojunctions to facilitate the photogenerated electron transfer. This review highlights the role of MoS₂ as a cocatalyst for nanocomposites in H₂ evolution reaction and CO₂ reduction. The H₂ evolution activity has been described comprehensively as binary (with metal oxide, carbonaceous materials, metal sulfides, and metal-organic frameworks) and ternary composites of MoS₂. Photocatalytic CO₂ reduction is a more complex and challenging process that demands an efficient light-responsive semiconductor catalyst to tackle the thermodynamic and kinetic factors. Photocatalytic reduction of CO₂ using MoS₂ is an emerging topic and would be a cost-effective substitute for noble catalysts. Herein, we also exclusively envisioned the possibility of layered MoS₂ and its composites in this area. This review is expected to furnish an understanding of the diverse roles of MoS₂ in solar fuel generation, thus endorsing an interest in utilizing this unique layered structure to create nanostructures for future energy applications.

Atomistic Study of the Bandgap Engineering of Two-Dimensional Silicon Carbide by Hydrogenation

This work studied hydrogen adsorption by a two-dimensional silicon carbide using a combined molecular dynamics and density functional theory approach. The geometrical properties of partially and fully hydrogenated structures were investigated, considering the effect of zero-point energy. The preferred hydrogen atom location is on top of silicon atoms. The hydrogen interaction energies were obtained for the first time as the attractive force. For fully hydrogenated 2D SiC, the chair-like conformer is the most stable configuration, and the next is the boat-like conformer, while the table-like structure is not stable. The coverage and arrangement of the adsorbed hydrogen atoms significantly influence the values of the direct/indirect bandgaps of the considered systems, increasing the bandgap to 4.07, 3.64, and 4.41 eV for chair-like, table-like, and boat-like, respectively. Their dynamical stability was investigated by phonon dispersion calculations. The obtained results can serve as a guide for the application of hydrogenated two-dimensional silicon carbide in optoelectronic applications in manufacturing innovation.

Ultrafast Microwave Synthesis of Ru-Doped MoP with Abundant P Vacancies as the Electrocatalyst for Hydrogen Generation in a Wide pH Range

Molybdenum phosphide (MoP) has received increasing attention for the hydrogen evolution reaction (HER) due to its Pt-like electronic structure and high electrical conductivity. In this work, a flake-like Ru-doped MoP with phosphorus vacancy (Ru-MoP-P_V) electrocatalyst is synthesized for the first time by a simple and rapid room-temperature microwave approach within 30 s. The created abundant phosphorus vacancies provide rich active sites and favor rapid electron transfer. The introduced Ru also enhances the catalytic activity of the synthesized electrocatalyst efficiently. Then, the designed Ru-MoP-P_V possesses low overpotentials for HER with 79, 100, and 161 mV in 1.0 M KOH, 0.5 M H₂SO₄, and 1.0 M phosphate-buffered saline to obtain 10 mA cm^-2. The Ru-MoP-P_V and NiFe-layered double hydroxide are used as the cathode and the anode, respectively, to drive water splitting and just need a low cell voltage of 1.6 V to achieve 10 mA cm^-2. This work provides a feasible way for the rapid production of metal phosphides for energy conversion and storage applications.