1
|
Lin TL, Lin YH, Lee AKX, Kuo TY, Chen CY, Chen KH, Chou YT, Chen YW, Shie MY. The exosomal secretomes of mesenchymal stem cells extracted via 3D-printed lithium-doped calcium silicate scaffolds promote osteochondral regeneration. Mater Today Bio 2023; 22:100728. [PMID: 37538916 PMCID: PMC10393792 DOI: 10.1016/j.mtbio.2023.100728] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/08/2023] [Revised: 06/22/2023] [Accepted: 07/07/2023] [Indexed: 08/05/2023] Open
Abstract
The development of surface modification techniques has brought about a major paradigm shift in the clinical applications of bone tissue regeneration. Biofabrication strategies enable the creation of scaffolds with specific microstructural environments and biological components. Lithium (Li) has been reported to exhibit anti-inflammatory, osteogenic, and chondrogenic properties by promoting several intracellular signaling pathways. Currently, research focuses on fabricating scaffolds with simultaneous dual bioactivities to enhance osteochondral regeneration. In this study, we modified the surface of calcium silicate (CS) scaffolds with Li using a simple immersion technique and evaluated their capabilities for bone regeneration. The results showed that Li ions could be easily coated onto the surfaces of CS scaffolds without affecting the microstructural properties of CS itself. Furthermore, the modifications did not affect the printing capabilities of the CS, and porous scaffolds could be fabricated via extrusion. Moreover, the presence of Li improved the surface roughness and hydrophilicity, thus leading to enhanced secretion of osteochondral-related regeneration factors, such as alkaline phosphatase (ALP), bone sialoprotein (BSP), and collagen II (Col II) proteins. Subsequent in vivo studies, including histological and micro-CT analyses, confirmed that the Li-modified CS scaffolds promoted osteochondral regeneration. The transcriptome analysis suggested that the enhanced osteochondrogenic capabilities of our scaffolds were influenced by paracrine exosomes. We hope this study will inspire further research on osteochondral regeneration.
Collapse
Affiliation(s)
- Tsung-Li Lin
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung, 406040, Taiwan
- Department of Orthopedics, China Medical University Hospital, Taichung, 404332, Taiwan
- Department of Sports Medicine, College of Health Care, China Medical University, Taichung, 406040, Taiwan
| | - Yen-Hong Lin
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung, 404332, Taiwan
| | - Alvin Kai-Xing Lee
- Department of Orthopedics, China Medical University Hospital, Taichung, 404332, Taiwan
| | - Ting-You Kuo
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung, 406040, Taiwan
| | - Cheng-Yu Chen
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung, 404332, Taiwan
| | - Kun-Hao Chen
- School of Medicine, China Medical University, Taichung City, 406040, Taiwan
| | - Yun-Ting Chou
- Graduate Institute of Dental Science and Oral Health Industries, China Medical University, Taichung, 406040, Taiwan
| | - Yi-Wen Chen
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung, 406040, Taiwan
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung, 404332, Taiwan
| | - Ming-You Shie
- Department of Biomedical Engineering, China Medical University, Taichung, 406040, Taiwan
- School of Dentistry, China Medical University, Taichung, 406040, Taiwan
- Department of Bioinformatics and Medical Engineering, Asia University, Taichung, 41354, Taiwan
| |
Collapse
|
2
|
Tung CC, Lin YH, Chen YW, Wang FM. Enhancing the Mechanical Properties and Aging Resistance of 3D-Printed Polyurethane through Polydopamine and Graphene Coating. Polymers (Basel) 2023; 15:3744. [PMID: 37765597 PMCID: PMC10535223 DOI: 10.3390/polym15183744] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/21/2023] [Revised: 09/07/2023] [Accepted: 09/12/2023] [Indexed: 09/29/2023] Open
Abstract
Three-dimensional (3D) printing is a versatile manufacturing method widely used in various industries due to its design flexibility, rapid production, and mechanical strength. Polyurethane (PU) is a biopolymer frequently employed in 3D printing applications, but its susceptibility to UV degradation limits its durability. To address this issue, various additives, including graphene, have been explored to enhance PU properties. Graphene, a two-dimensional carbon material, possesses remarkable mechanical and electrical properties, but challenges arise in its dispersion within the polymer matrix. Surface modification techniques, like polydopamine (PDA) coating, have been introduced to improve graphene's compatibility with polymers. This study presents a method of 3D printing PU scaffolds coated with PDA and graphene for enhanced UV stability. The scaffolds were characterized through X-ray diffraction, Fourier-transform infrared spectroscopy, mechanical testing, scanning electron microscopy, and UV durability tests. Results showed successful PDA coating, graphene deposition, and improved mechanical properties. The PDA-graphene-modified scaffolds exhibited greater UV resistance over time, attributed to synergistic effects between PDA and graphene. These findings highlight the potential of combining PDA and graphene to enhance the stability and mechanical performance of 3D-printed PU scaffolds.
Collapse
Affiliation(s)
- Chien-Chiang Tung
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
| | - Yen-Hong Lin
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan;
| | - Yi-Wen Chen
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan;
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung 406040, Taiwan
- Department of Bioinformatics and Medical Engineering, Asia University, Taichung 41354, Taiwan
| | - Fu-Ming Wang
- Graduate Institute of Applied Science and Technology, National Taiwan University of Science and Technology, Taipei 10607, Taiwan
| |
Collapse
|
3
|
Chen YW, Lin YH, Lin TL, Lee KXA, Yu MH, Shie MY. 3D-biofabricated chondrocyte-laden decellularized extracellular matrix-contained gelatin methacrylate auxetic scaffolds under cyclic tensile stimulation for cartilage regeneration. Biofabrication 2023; 15:045007. [PMID: 37429300 DOI: 10.1088/1758-5090/ace5e1] [Citation(s) in RCA: 5] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2023] [Accepted: 07/10/2023] [Indexed: 07/12/2023]
Abstract
Three-dimensional (3D) hydrogel constructs can mimic features of the extracellular matrix (ECM) and have tailorable physicochemical properties to support and maintain the regeneration of articular cartilage. Various studies have shown that mechanical cues affect the cellular microenvironment and thereby influence cellular behavior. In this study, we fabricated an auxetic scaffold to investigate the effect of 3D tensile stimulation on chondrocyte behavior. Different concentrations of decellularized extracellular matrix (dECM) were mixed with fish gelatin methacrylate (FGelMa) and employed for the preparation of dECM/FGelMa auxetic bio-scaffolds using 3D biofabrication technology. We show that when human chondrocytes (HCs) were incorporated into these scaffolds, their proliferation and the expression of chondrogenesis-related markers increased with dECM content. The function of HC was influenced by cyclic tensile stimulation, as shown by increased production of the chondrogenesis-related markers, collagen II and glycosaminoglycans, with the involvement of the yes-associated protein 1 signaling pathway. The biofabricated auxetic scaffold represents an excellent platform for exploring interactions between cells and their mechanical microenvironment.
Collapse
Affiliation(s)
- Yi-Wen Chen
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung 406040, Taiwan
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan
- High Performance Materials Institute for x-Dimensional Printing, Asia University, Taichung City 41354, Taiwan
| | - Yen-Hong Lin
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan
| | - Tsung-Li Lin
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung 406040, Taiwan
- Department of Orthopedics, China Medical University Hospital, Taichung 404332, Taiwan
- Department of Sports Medicine, College of Health Care, China Medical University, Taichung 406040, Taiwan
| | - Kai-Xing Alvin Lee
- Department of Orthopedics, China Medical University Hospital, Taichung 404332, Taiwan
| | - Min-Hua Yu
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan
- Institute of Translational Medicine and New Drug Development, China Medical University, Taichung 406040, Taiwan
| | - Ming-You Shie
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan
- Department of Biomedical Engineering, China Medical University, Taichung 406040, Taiwan
- School of Dentistry, China Medical University, Taichung 406040, Taiwan
- Department of Bioinformatics and Medical Engineering, Asia University, Taichung 41354, Taiwan
| |
Collapse
|
4
|
Chiu YC, Lin YH, Chen YW, Kuo TY, Shie MY. Additive manufacturing of barium-doped calcium silicate/poly-ε-caprolactone scaffolds to activate CaSR and AKT signalling and osteogenic differentiation of mesenchymal stem cells. J Mater Chem B 2023; 11:4666-4676. [PMID: 37128755 DOI: 10.1039/d3tb00208j] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
3D-printed scaffolds are suitable for patient-specific implant preparation for bone regeneration in large-scale critical bone defects. In addition, these scaffolds should have mechanical and biological properties similar to those of natural bone tissue. In this study, 3D-printed barium-doped calcium silicate (BaCS)/poly-ε-caprolactone (PCL) composite scaffolds were fabricated as an alternative strategy for bone tissue engineering to achieve appropriate physicochemical characteristics and stimulate osteogenesis. Scaffolds containing 10% Ba (Ba10) showed optimal mechanical properties, preventing premature scaffold degradation during immersion while enabling ion release in a sustained manner to achieve the desired therapeutic goals. In addition, Wharton's jelly mesenchymal stem cells (WJMSCs) were used to assess biocompatibility and osteogenic differentiation behaviour. WJMSCs were cultured on the scaffold and permeabilised via ICP to analyse the presence of Si and Ba ions in the medium and cell lysates, suggesting that the ions released by the scaffold could effectively enter the cells. The protein expression of CaSR, PI3K, Akt, and JNK confirmed that CaSR could activate cells cultured in Ba10, thereby affecting the subsequent PI3k/Akt and JNK pathways and further promoting osteogenic differentiation. The in vivo performance of the proposed scaffolds was assessed using micro-CT and histological slices, which revealed that the BaCS scaffolds could further enhance bone regeneration, compared with bare scaffolds. These results suggest the potential use of 3D-printed BaCS/PCL scaffolds as next-generation substitutes for bone regeneration.
Collapse
Affiliation(s)
- Yung-Cheng Chiu
- School of Medicine, China Medical University, Taichung 406040, Taiwan
- Department of Orthopedic Surgery, China Medical University Hospital, Taichung 404332, Taiwan
| | - Yen-Hong Lin
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan.
| | - Yi-Wen Chen
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan.
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung 406040, Taiwan
| | - Ting-You Kuo
- Graduate Institute of Biomedical Sciences, China Medical University, Taichung 406040, Taiwan
| | - Ming-You Shie
- x-Dimension Center for Medical Research and Translation, China Medical University Hospital, Taichung 404332, Taiwan.
- School of Dentistry, China Medical University, Taichung 406040, Taiwan
- Department of Bioinformatics and Medical Engineering, Asia University, Taichung 41354, Taiwan
| |
Collapse
|
5
|
Synergistic Effect of Static Magnetic Fields and 3D-Printed Iron-Oxide-Nanoparticle-Containing Calcium Silicate/Poly-ε-Caprolactone Scaffolds for Bone Tissue Engineering. Cells 2022; 11:cells11243967. [PMID: 36552731 PMCID: PMC9776421 DOI: 10.3390/cells11243967] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2022] [Revised: 12/06/2022] [Accepted: 12/07/2022] [Indexed: 12/14/2022] Open
Abstract
In scaffold-regulated bone regeneration, most three-dimensional (3D)-printed scaffolds do not provide physical stimulation to stem cells. In this study, a magnetic scaffold was fabricated using fused deposition modeling with calcium silicate (CS), iron oxide nanoparticles (Fe3O4), and poly-ε-caprolactone (PCL) as the matrix for internal magnetic sources. A static magnetic field was used as an external magnetic source. It was observed that 5% Fe3O4 provided a favorable combination of compressive strength (9.6 ± 0.9 MPa) and degradation rate (21.6 ± 1.9% for four weeks). Furthermore, the Fe3O4-containing scaffold increased in vitro bioactivity and Wharton's jelly mesenchymal stem cells' (WJMSCs) adhesion. Moreover, it was shown that the Fe3O4-containing scaffold enhanced WJMSCs' proliferation, alkaline phosphatase activity, and the osteogenic-related proteins of the scaffold. Under the synergistic effect of the static magnetic field, the CS scaffold containing Fe3O4 can not only enhance cell activity but also stimulate the simultaneous secretion of collagen I and osteocalcin. Overall, our results demonstrated that Fe3O4-containing CS/PCL scaffolds could be fabricated three dimensionally and combined with a static magnetic field to affect cell behaviors, potentially increasing the likelihood of clinical applications for bone tissue engineering.
Collapse
|