Bioceramic and polycationic biopolymer nanocomposite scaffolds for improved wound self-healing and anti-inflammatory properties: an in vitro study

Numerical analysis of scaffold degradation in cryogenic environment: impact of cell migration and cell apoptosis

The analysis of degradation in the presence of cell death and migration is a critical aspect of research in various biological fields, such as tissue engineering, regenerative medicine, and disease pathology. In present study, numerical study of degradation of scaffold were performed in present of cells, cell apoptosis and cell migration. A poly electrolyte complex (PEC) silk fibroin scaffold was used for degradation study. Degradation study in the presence of cells and migration were performed at fixed pH concentration 7.2. Similarly, degradation study of scaffold were performed at different pH cell apoptosis. A transient analysis of scaffold was evaluated in COMSOL 5.5 in presence of cryogenic temperature at different temperature gradient. The parameters; temperature, stress, strain tensor and deformation gradient associated with the degradation of polyelectrolyte complex scaffold were evaluated. Result shows that in both geometries minimum temperature had been achieved as 230.051 K at point P4 in series view and parallel view and at a point P3 for cell migration study for -5 k min-1and -1 k min-1, respectively. The maximum stress had been generated for 5.57 × 107N m-2for the temperature gradient of -2 K min-1at T cycle in the case of cell migration study. In contrast in series view the maximum stress 2.9 × 107 N m-2were observed at P4 which was higher as compare to P3. Similarly, for a parallel view, maximum stress (3.93 × 107 N m-2) was obtained for point P3. It had been observed that the maximum strain tensor 5.21 × 10-3, 5.15 × 10-3and 5.26 × 10-3was generated in series view at 230 k on a point P3 for - 1, -2 and -5 K min-1, respectively. Similarly, the maximum strain tensor 8.16 × 10-3, 8.09 × 10-3and 8.09 × 10-3was generated in parallel view at 230 k on a point P3 for -1, -2 and -5 K min-1, respectively. In the presence of cells, at a point P4 for temperature gradient of -1 and -2 K min-1, it had been closed to the scaffold wall, which had a different temperature profile than the point P3 and scaffold comes to the contact with the cells. The analysis of PEC scaffold degradation in the presence of cells, including cell apoptosis and migration, offers significant insights into the relationship between scaffold properties, cell behaviour, and tissue regeneration.

Multi-functional bandage - bioactive glass/metal oxides/alginate composites based regenerative membrane facilitating re-epithelialization in diabetic wounds with sustained drug delivery and anti-bactericidal efficacy

Chronic wounds, especially diabetic, foot and pressure ulcers are a major health problem affecting >10 % of the world's populace. Calcium phosphate materials, particularly, bioactive glasses (BG), used as a potential material for hard and soft tissue repair. This study combines nanostructured 45S5 BG with titania (TiO2) and alumina (Al2O3) into a composite via simple sol-gel method. Prepared composites with alginate (Alg) formed a bioactive nanocomposite hydrogel membrane via freezing method. X-ray diffraction revealed formation of two phases such as Na1.8Ca1.1Si6O14 and β-Na2Ca4(PO4)2SiO4 in the silica network. Fourier transformed InfraRed spectroscopy confirmed the network formation and cross-linking between composite and alginate. <2 % hemolysis, optimal in vitro degradation and porosity was systematically evaluated up to 7 days, resulting in increasing membrane bioactivity. Significant cytocompatibility, cell migration and proliferation and a 3-4-fold increase in Collagen (Col) and Vascular Endothelial Growth Factor (VEGF) expression were obtained. Sustained delivery of 80 % Dox in 24 h and effective growth reduction of S. aureus and destruction of biofilm development against E. coli and S. aureus within 24 h. Anatomical fin regeneration, rapid re-epithelialization and wound closure were achieved within 14 days in both zebrafish and in streptozotocin (STZ) induced rat in vivo animal models with optimal blood glucose levels. Hence, the fabricated bioactive membrane can act as effective wound dressing material, for diabetic chronic infectious wounds.

Devitrite (Na2Ca3Si6O16) phase dominated nanostructured 45S5 bioactive glass: exploring its structural and biological properties

This research study is primarily centred around calcination temperature and time influence on phase formation in bioactive glasses (BGs). In the present study, BG with a nominal composition of 45S5 was synthesized through the sol-gel process. The developed BGs then underwent heat treatment for various sintering durations and temperatures. X-ray diffraction (XRD) patterns of the BGs reveals that the sintering process led to the crystallization of both devitrite (Na2Ca3Si6O16) and combeite (Na2Ca2Si3O9) phases. The field emission scanning electron microscopy study divulges morphological alterations, from sheet-like to rod-like structures to eventually transforming into spherical and sheet-like structures. The surface area and Type-IV mesoporous porosity were validated through Brunauer Emmett Teller analysis, highlighting a notable increase in pore volume and mechanical strength at a lower sintering temperature.In vitroapatite formation was carried out in Hank's balance salt in order to evaluate the bioactivity of the glass. After 7 d of immersion in simulated body fluid (SBF), XRD patterns and scanning electron microscopy micrographs results showed that formation of hydroxyapatite layer on the surface of the BGs. The BG compatibility with erythrocytes (red blood cells) was also studied, and the results revealed that there was only a low 2% lysis, showing good hemocompatibility. The drug loading and release behaviour of the BGs was studied in thein vitroanalysis. The findings showed a high drug encapsulation effectiveness of up to 90% and continuous drug release from the BGs for 24 h. The materials biocompatibility was unambiguously confirmed by cytocompatibility and proliferation studies. This study provides compelling evidence for the exceptional efficacy and promise of the distinct 45S5 BGs in advancing the field of regenerative medicine.

Stereogenic Harmony Fabricated Mechanoresponsive Homochiral Triphenylalanine Analogues with Synergistic Antibacterial Performances: A Potential Weapon for Dermal Wound Management

The wound recovery phenomenon remains as one of the long challenging concerns worldwide. In search of user-friendly dressing materials, in this report, we fabricated a rational combinatorial strategy utilizing stereogenic harmony in a triphenylalanine fragment and appending it to δ-amino valeric acid at the N-terminus (hydrogelators I-VII) such that a potential scaffold could be fished out from the design. Our investigations revealed that all the hydrogelators displayed not only excellent self-healing performance as well as high mechanical strength at physiological pH but also mechanical stress-triggered gel-sol-gel transition properties. The structural and morphological investigation confirmed the presence of β-sheet-like assemblies stabilized by intermolecular H-bonding and π-π interactions. Moreover, these scaffolds showed substantial antibacterial as well as antifungal efficacy against common wound pathogens, i.e, four Gram-positive bacteria (Staphylococcus aureus, Streptococcus mutans, B. subtilis, E. fecalis), four Gram-negative bacteria (Escherichia coli, Klebsiella pneumonia, P. aerugonosa, Proteus spp.), and two fungal strains (C. albicans and A. niger). The manifestation of consistent antioxidant properties might be due to the enhancement of amphiphilicity in hydrogelators, which has led to the generation of reactive oxygen species (ROS) in a facile manner, a probable mechanism to damage the microbial membrane, the driving force behind the antimicrobial efficacy. Also, the constructs exhibited proteolytic resistance and remarkable biocompatibility toward mammalian cells. Thus, based on the above benchmarks, the homochiral hydrogelator IV was seived out from a pool of seven, and we proceeded toward its in vivo evaluation using full-thickness excisional wounds in Wister rats. The scaffolds also accentuated the re-epithelialization as well in comparison to the negative control, thereby facilitating the wound closure process in a very short span of time (10 days). Overall, our in vitro and in vivo analysis certifies hydrogelator IV as an ideal dressing material that might hold immense promise for future wound care management.

Chitosan bioactive glass scaffolds for in vivo subcutaneous implantation, toxicity assessment, and diabetic wound healing upon animal model

This study aims to develop chitosan-bioactive glass (BG) scaffolds for diabetic wound healing, toxicity valuation, and subcutaneous implantation in animals for biocompatibility assessment. The scaffolds were prepared by lyophilization technique. In specific BG without sodium (Na), composited with chitosan for better biological activities. The equipped scaffolds were studied for their physiochemical, biological, in vitro and in vivo performances. The chitosan and chitosan-BG (Na free) scaffolds show reliable biocompatibility, cytocompatibility, anti-oxidant, and tissue regeneration. The biocompatibility, toxicity assessments, and diabetic skin wound healing experiments were examined through in vivo studies using Sprague Dawley rats. The extracted tissue samples were analyzed using hematoxylin-eosin- (H and E) and Masson's trichrome staining. Further, tissue excised after scaffold implantation declared non-toxic, non-allergic, and anti-inflammatory nature of chitosan scaffolds. Moreover, the total ribonucleic acid (RNA) expression levels were measured using reverse transcription-polymerase chain reaction (RT-PCR) for the scaffolds against vascular endothelial growth factor (VEGF), and collagen type one (Col-1) primers. Admirably, the scaffolds achieved the best level of skin wound healing via tissue regeneration by increasing epithetical cell formation and collagen deposition. Thus, the biocompatibility, non-toxicity, anti-inflammatory, and wound healing efficiency proved that the chitosan-BG (Na free) scaffold can be readily substantial for wound healing.

Opportunities for Bioactive Glass in Gastrointestinal Conditions: A Review of Production Methodologies, Morphology, Composition, and Performance

Bioactive glasses (BGs) are widely used in orthopedic and dental applications for their ability to stimulate endogenous bone formation and regeneration. BG applications more recently broadened to include soft tissue conditions, based on their ability to stimulate angiogenesis, soft tissue regeneration, and wound healing. Sol-gel synthesis has helped facilitate this expansion, allowing formulators to tailor the morphological characteristics of the BG matrix. The effectiveness of BGs in skin wound healing is viewed as a gateway for their use as both a therapeutic and drug delivery platform in other soft tissue applications, notably gastrointestinal (GI) applications, which form the focus of this review. Recent changes in international guidelines for GI conditions shifted clinical objectives from symptom management to mucosal wound healing. The additional scrutiny of proton pump inhibitor (PPI) safety, increasing burden of disease, and financial costs associated with gastroesophageal reflux disease (GERD), peptic ulcer disease (PUD), and inflammatory bowel disease (IBD) open new clinical possibilities for BG. This narrative literature review intersects materials engineering, formulation science, and clinical practice, setting it apart from prior literature. Broadly, current evidence for BG applications in GI conditions is sparse and under-developed, which this review directly addresses. It explores and synthesizes evidence that supports the potential use of sol-gel-derived BG for the efficacious treatment of soft tissue applications, with specific reference to GI conditions. An overview with comparative analysis of current BG synthesis techniques and associated challenges is presented, and influences of composition, biologically active ions, and morphological characteristics in soft tissue applications are explored. To contextualize this, sol-gel-derived BGs are proposed as a dual, tailorable therapeutic and drug delivery platform for upper and lower GI conditions. Future directions for this largely untapped area of translational research are also proposed, based on extant literature.

3D interconnected porous PMMA scaffold integrating with advanced nanostructured CaP-based biomaterials for rapid bone repair and regeneration

Bioactive scaffolds with polymer and nanostructured bioactive glass-based composites are promising materials for regenerative applications in consequence of close mimics of natural bone composition. Poly methyl methacrylate (PMMA) is a highly preferred thermoplastic polymer for orthopedic applications as it has good biocompatibility. Different kinds of bioactive, biodegradable as well as biocompatible biomaterial composites such as Bioglass (BG), Hydroxyapatite (Hap), and Tricalcium phosphate (TCP) can be integrated with PMMA, so as to augment the bioactivity, porosity as well as regeneration of hard tissues in human body. Among the bioactive glass, 60S BG (Bioactive glass with 60 percentage of Silica without Sodium ions) is better materials among aforementioned systems owning to mechanical stability as well as controlled bioactive material. In this work, the fabrication of PMMA-CaP (calcium phosphate)-based scaffolds were carried out by Thermal Induced Phase Separation method (TIPS). X-ray diffractogram analysis (XRD) is used to examine the physiochemical properties of the scaffolds that evidently reveal the presence of calcium phosphate besides calcium phosphate silicate phases. The Field Emission Scanning Electron Microscopy (FESEM) studies obviously exhibited the microstructure of the scaffolds as well as their interconnected porous morphology. The PMMA/60S BG/TCP (C50) scaffold has the maximum pore size, measuring 77 ± 23 μm, while the average pore size ranges from 50 ± 20 to 80 ± 23 μm. By performing a liquid displacement method, the C50 scaffold is found to have the largest porosity of 50%, high hydrophilicity of 118.16°, and a compression test reveals the scaffolds to have a maximum compressive strength of 0.16 MPa. The emergence of bone-like apatite on the scaffold surface after 1st and 21st days of SBF immersion is further supported by in vitro bioactivity studies. Cytocompatibility and hemocompatibility analyses undoubtedly confirmed the biocompatibility behavior of PMMA-based bioactive scaffolds. Nano-CT investigation demonstrates that PMMA-CaP scaffolds provide more or less alike morphologies of composites that resemble the natural bone. Therefore, this combination of scaffolds could be considered as potential biomaterials for bone regeneration application. This detailed study promisingly demonstrates the eminence of the unique scaffolds in the direction of regenerative medicines.