Are Trabecular Metal Cones a Valid Option to Treat Metaphyseal Bone Defects in Complex Primary and Revision Knee Arthroplasty?

Unveiling the link: highly porous tantalum-augmented implants and periprosthetic joint infection in revision total knee arthroplasty-a systematic review and meta-analysis

BACKGROUND

The trend of the literature suggests that tantalum (Ta) may possess antibacterial properties. However, no consensus has been reached on Ta's preventive role in periprosthetic joint infection (PJI) in patients undergoing revision total knee arthroplasty (rTKA).

QUESTION

What is the PJI incidence rate after rTKA using Ta-augmented implants for both septic and all-cause revision reasons? Is there a difference in the PJI rate following rTKA performed using Ta-augmented implants compared to non-Ta implants?

METHODS

Using 5 major databases, the authors searched for studies reporting the rate of PJIs following rTKA using Ta-augmented implants until January 2022. The PJI rates for the Ta group were pooled, compared to the control group, and presented as odds ratios (OR) and 95% confidence intervals (CI) using forest plots.

RESULTS

Thirty eligible studies involving 881 knees were included. The overall PJI rate following rTKA using Ta-augmented implants was 8.1% (CI = 6.6%-9.9%). Specifically, in cases of septic revision, the infection rate was 15.7% (95% CI = 11.7%-20.7%). The comparative analysis indicated a similar PJI rate between the Ta- augmented and non-Ta group across 3 studies, which was found to be similar (OR = 0.52, 95% CI = 0.13-2.0, P = 0.35).

CONCLUSION

PJI poses a significant risk following both aseptic and septic revision rTKA, even when Ta-augmented implants were administrated. The rate of PJI after rTKA was similar for Ta- augmented implants and non-Ta implants. Further rigorous studies with a high level of evidence are essential to definitively determine the potential impact of Ta derivatives on infection rates following rTKA, particularly in septic revision.

LEVEL OF EVIDENCE

IV.

Are Flexible Metaphyseal Femoral Cones Stable and Effective? A Biomechanical Study on Hinged Total Knee Arthroplasty

BACKGROUND

Cones currently available in the market are rigid, and unless they are custom-specific designed, are unable to correctly adapt to the shape of the patient's bone. Therefore, flexible metaphyseal cones have been recently introduced to reduce potential bone trauma during implantation. Even if a preliminary clinical study on their use has shown promising results, no biomechanical study evaluates and quantifies their mechanical efficacy and safety.

METHODS

Two commercial versions of flexible cones were analyzed in this study using finite element analysis, based on a previously validated model. Each cone geometry was modeled both as flexible and as rigid, and implanted following surgical guidelines. Three activities were simulated in this study and compared among configurations: surgical impaction, walking, and chair rise.

RESULTS

During impaction, results showed considerably reduced stress in the flexible cones in comparison with rigid ones; the stress resulted was also better distributed and more homogeneous all over the cortical bone, with lower bone peaks. Considering the 2 different activities, the analysis did not show any remarkable differences between flexible and rigid cones both in terms of bone stress and implant micromotion.

CONCLUSIONS

The findings demonstrate that metaphyseal flexible cones allow macrodeformation during impaction due to their flexibility, and therefore, are safer in comparison with rigid cones. However, for the daily tasks investigated, results showed no major differences between rigid and flexible cones in terms of bone stress, implant stability, and micromotion. Therefore, their mechanical performances can be considered similar to the rigid cone.

Metaphyseal cones combined with diaphyseal impaction grafting provide good outcomes and survival in a complex revision total knee arthroplasty: a matched comparative analysis

PURPOSE

To compare clinical and radiological outcomes, implant survivorship at a minimum of 1-year follow-up using metaphyseal trabecular cones with or without impaction grafting in a complex revision TKA.

METHODS

A retrospective comparative matched analysis was performed and 15 patients who underwent revision surgery using the combination of porous trabecular metaphyseal cone and diaphyseal impaction grafting (MC-IBG) were matched with a group of 13 patients who also underwent revision surgery using metaphyseal cone (MC) without impaction grafting. All included patients presented severe bone defect (AORI 2,3) and a rotating-hinge prosthesis were implanted.

RESULTS

Both groups were comparable regarding the baseline demographic and clinical data. Patients had previously undergone a mean of 4 (range, 2-12) and 3 (range, 2-5) previous procedures in the MC-IBG and MC groups, respectively. The indications for revision were aseptic loosening in 11 (73.3%) and 11 (84.6%) patients; prosthetic joint infection in 4 (26.7%) and 2 (15.4%) in the MC-IBG and MC groups, respectively. There was no significant difference in the mean postoperative Knee Society Score between the study groups (p = 0.806). Overall, 4 patients had further revision. Two patients were revised in the MC-IBG group, one patient for aseptic loosening and the second one after 2 episodes of instability. Two patients in the MC group presented prosthetic joint infection and underwent a two-stage reimplantation. No significant difference was observed between the study groups at comparison (p = 0.92).

CONCLUSION

Trabecular metal cones with diaphyseal impaction grafting provide an alternative technique in a complex revision TKA surgery with early clinical and radiographic success.

Cause for concern? Significant cement coverage in retrieved metaphyseal cones after revision total knee arthroplasty

BACKGROUND

Metaphyseal cones are used to manage bone loss in revision total knee arthroplasty with increasing popularity. Post-operative radiographs and explant procedures suggest that cement may extrude around the cone implant into the cone-bone interface and prevent biologic in- or on-growth. The purpose of this study was to perform a retrieval analysis to describe the pattern of direct cementation onto the porous surface area of metaphyseal cones.

METHODS

Eighteen tibial and femoral cones were identified in an institutional implant retrieval registry. Anterior, posterior, medial and lateral quadrants were digitally mapped for direct cementation, bone ongrowth and fibrous ongrowth were calculated as a percentage of the porous surface area. Plain radiographs from prior to cone explant were analyzed for the presence of cement in all four quadrants and compared with results of the retrieval analysis.

RESULTS

Mean bone ongrowth was 25%, direct cementation was 24% (31% in tibial cones) and fibrous ongrowth was 29% of the porous surface area of the retrieved cones. There were no significant differences when comparing patterns of bone or fibrous ongrowth or cementation between anterior, posterior medial and lateral porous surfaces for tibia cones, femoral cones or all cones grouped together. Plain radiographs significantly underestimated the amount of cement covering the cone (p = 0.02).

CONCLUSION

In this retrieval study, we found significant cement extrusion around the porous surface of metaphyseal cones in revision TKAs. Optimizing the cone-bone interface may reduce the risk of cement extrusion and theoretically reduce the risk of aseptic loosening.

Combined structural allograft and tantalum cone to manage segmental metaphyseal tibial bone defect in revision knee arthroplasty

Tibial bone defect remains a challenge in revision knee arthroplasty. The present innovative technique combines structural allograft and tantalum metaphyseal cone for treatment of AORI stage 2A and 2B (uncontained peripheral metaphyseal) tibial defect. The aim is to reconstitute bone stock and enhance allograft osseointegration, while limiting stress to the allograft by implanting the metaphyseal cone through the allograft and the original bone. LEVEL OF EVIDENCE: V (expert opinion).

Current Advances and Applications of Tantalum Element in Infected Bone Defects

Infected bone defects (IBDs) cause significant economic and psychological burdens, posing a huge challenge to clinical orthopedic surgeons. Traditional approaches for managing IBDs possess inevitable shortcomings; therefore, it is necessary to develop new functionalized scaffolds. Tantalum (Ta) has been widely used in load-bearing orthopedic implants due to its good biocompatibility and corrosion resistance. However, undecorated Ta could only structurally repair common bone defects, which failed to meet the clinical needs of bacteriostasis for IBDs. Researchers have made great efforts to functionalize Ta scaffolds to enhance their antibacterial activity through various methods, including surface coating, alloying, and micro- and nanostructure modifications. Additionally, several studies have successfully utilized Ta to modify orthopedic scaffolds for enhanced antibacterial function. These studies remarkably extended the application range of Ta. Therefore, this review systematically outlines the advances in the fundamental and clinical application of Ta in the treatment of IBDs, focusing on the antibacterial properties of Ta, its functionalization for bacteriostasis, and its applications in the modification of orthopedic scaffolds. This study provides researchers with an overview of the application of Ta in the treatment of IBDs.

Tibial metaphyseal cones combined with short stems perform as well as long stems in revision total knee arthroplasty

Backgrounds

There is uncertainty around optimal tibial stem length in revision total knee arthroplasty (rTKA) utilizing a tibial trabecular metal (TM) cone. The purpose of this study was to compare: (1) functional outcomes, (2) radiographic outcomes and (3) implant survivorship in rTKA utilizing TM cones combined with either short stems (SS) or long stems (LS) at minimum 2 years follow‐up.

Methods

In this retrospective, multi‐centre study, patients undergoing rTKA utilizing a TM cone between 2008 and 2019 were included. Patients were divided into: SS group (no diaphyseal engagement), and LS group (diaphyseal engagement). All relevant clinical charts and post‐operative radiographs were examined. Oxford Knee Score (OKS) and EuroQol‐5D (EQ‐5D‐5L) data were collected at most recent follow‐up.

Results

In total, 44 patients were included: 18 in the SS group and 26 in the LS group. The mean time of follow‐up was 4.0 years. Failure free survival was 94.4% for the SS group and 92.3% for the LS group. All failures were for prosthetic joint infections managed with debridement, antibiotics, and implant retention. At most recent follow‐up, 3 patients demonstrated radiographic signs of lucency (1 SS 2 LS, P = 1) and the mean OKS were 37 ± 4 and 36 ± 6 (P = 0.73) in the SS and LS groups, respectively.

Conclusion

Tibial SS combined with TM cones performed as well as LS in rTKA at minimum 2 years follow‐up. A tibial SS in combination with a TM cone is a reliable technique to achieve stable and durable fixation in rTKA.

High survival rate at mid-term follow up of porous tantalum cones for bone defects in revision total knee replacement: A 3-11 years follow up report

BACKGROUND

Large metaphyseal bone losses are commonly encountered in revision total knee arthroplasty (rTKA). Anderson Orthopaedic Research Institute (AORI) type 2 and 3 defects generally require some metaphyseal fixation or augmentation. This study evaluates the midterm results of Porous Tantalum Trabecular Metal™ (TM) cones in revision TKA addressing severe bone loss.

METHODS

Patients who underwent revision TKA using metaphyseal cones and a varus-valgus constrained (VVC) implant from January 2010 to January 2018 at our institution were identified from a prospective research database. Pre-operative patient characteristics and operative data were reviewed. Postoperative outcomes were compared with pre-operative values. Primary study aims were to evaluate outcomes, including complications and re-operations, radiographic assessment of cones osteointegration, and survivorship.

RESULTS

A total of 101 knees (101 patients) underwent revision TKA with 139 metaphyseal cones (80 tibial, 59 femoral). AORI defect classification was assessed intraoperatively. All patients were available for a minimum of 2 years of clinical and radiographic follow up. Mean follow up was 7.5 years (range 3-11 years). All patients showed significant improvement of clinical outcomes. Fifteen knees required re-operation and nine required revision of the implants, most commonly for recurrent infection (six of nine revisions) with cones removal. Kaplan-Meier survival analysis show a survival rate of 93.9% at 2 years and a survival rate of 90.2% at 5 and 11 years.

CONCLUSIONS

This large series illustrates the utility of porous metaphyseal cones in revision TKA with promising clinical and radiographic results and a high survival rate at mid-term follow up.

The Joint-Specific BACH classification: A predictor of outcome in prosthetic joint infection

BACKGROUND

There is currently no commonly accepted method of stratifying complexity of prosthetic joint infection (PJI). This study assesses a new classification, the Joint-Specific, Bone involvement, Anti-microbial options, Coverage of the soft tissues, Host status (JS-BACH) classification, for predicting clinical and patient reported outcomes in PJI.

METHODS

Patients who received surgery for PJI at two centres in the UK between 2010 and 2015 were classified using JS-BACH as 'uncomplicated', 'complex' or 'limited treatment options'. Patient reported outcomes were recorded at 365-days following the index operation and included the EuroQol EQ-5D-3L index score and the EQ-visual analogue score (VAS). Clinical outcome data were obtained from the most recent follow-up appointment.

FINDINGS

220 patients met the inclusion criteria. At 365-days following the index operation, patients with 'uncomplicated' PJI reported similar EQ-index scores (0.730, SD:0.326) and EQ-VAS (79.4, SD:20.9) compared to the age-matched population. Scores for 'uncomplicated' PJI were significantly higher than patients classified as having 'complex' (EQ-index:0.515 SD:0.323, p = 0.012; EQ-VAS:68.4 SD:19.4, p = 0.042) and 'limited treatment options' PJI (EQ-index:0.333 SD:0.383, p < 0.001; EQ-VAS:60.2, SD:23.1, p = 0.005). The median time to final follow-up was 4.7 years (inter-quartile range 2.7-6.7 years) where there were 74 cases (33.6%) of confirmed recurrence. Using death as a competing risk, the Cox proportional-hazards ratio of recurrence for 'complex' versus 'uncomplicated' PJI was 23.7 (95% CI:3.23-174.0, p = 0.002) and having 'limited options' verses 'uncomplicated' PJI was 57.7 (95% CI:7.66-433.9, p < 0.001).

INTERPRETATION

The JS-BACH classification can help predict likelihood of recurrence and quality of life following surgery for PJI. This will aid clinicians in sharing prognostic information with patients and help guide referral for specialist management of PJI.

[Bone defect management in revision knee arthroplasty]

BACKGROUND

In 2019, 124,677 primary total knee arthroplasties and 14,462 revision TKA were performed in Germany. This corresponds to a percentage of 11.6%. According to the EPRD, the probability of further revision surgery after the first exchange operation is around 15%.

REASONS

The most common reason for revision surgery is still aseptic loosening with 23.9%. One possible cause could be the difficult fixation of revision total knee arthroplasty. If the bone quality is insufficient, cement-free or cemented diaphyseal anchoring of the prosthesis is often not sufficient to ensure adequate fixation. As a rule, defect management and fixation of the implant are based on the defect situation and the quality of the bone. Therefore, revision total knee arthroplasties based on the fixation principle of Jones et al. should be sufficiently fixed in at least 2 zones.

TECHNIQUES

There are various techniques for stable anchoring of revision implants. In addition to cemented or cementless stem anchoring, bone allografts, wedges and blocks and, in recent years, cones and sleeves have become increasingly popular. In the present work, the various options for a stable anchoring of revision implants are presented and evaluated. In addition, the clinical and radiological outcome of cones vs. sleeves in bone defect management in revision knee arthroplasty will be compared.

Bilateral Primary Total Knee Arthroplasty and Reconstruction of the Medial Tibial Plateau by an Asymmetric Cone in a Patient with Charcot Arthropathy

Charcot arthropathy of the knee is an extremely rare orthopedic disease that is very challenging for the treating physician and is associated with many complications, especially if it is occurring on both knees. Meanwhile, in the advanced stage, despite many potential complications, TKA is recognized as the gold standard. However, destruction of the medial tibial plateau is typical for the disease, which makes a stable anchorage of the prosthesis much more difficult. Therefore, we present a case in which sufficient primary stability could be achieved with an asymmetrical second-generation tibial cone with an anatomical design and implantation instruments adapted to the bony anatomy in the presence of severe tibial destruction on both sides. In the two-year follow-up, the patient showed good mobility and stability on both sides. In advanced Charcot arthropathy of the knee, the use of asymmetric tibial cones appears to be an appropriate solution for secure fixation and stability of the implant.

Reconstruction of Proximal Metaphyseal Femoral Defects Using Trabecular Metal Augments in Revision Total Hip Arthroplasty

Porous tantalum augments are widely used in revision total hip arthroplasty for the reconstruction of severe bone defects. Here, we present the first 3 cases who underwent femoral revision arthroplasty using standard distal femoral and proximal tibial porous tantalum cones to reconstruct severe bone loss in the proximal femur. Cones were inserted press fit, followed by implantation of a cemented revision stem in all cases. After a mean follow-up period of 15.8 months, all patients showed an improved Harris-Hip-Score and no radiological signs of subsidence or loosening. Porous tantalum cones may be an option in the reconstruction of severe femoral defects in revision total hip arthroplasty. The shape of the tantalum cones should be optimized for the use in the proximal femur.

Preliminary clinical results of coated porous tibia cones in septic and aseptic revision knee arthroplasty

PURPOSE

To analyze the first results of calcium-phosphate-coated porous tibia cones.

METHODS

Patients treated with TrabecuLink^®-CaP Cones were retrospectively recruited from January 2016 to December 2017. These custom-made cones were produced using titanium alloy Ti-6Al-4 V (Tilastan^®) and using additive manufacturing with a special calcium-phosphate coating (HX^®-coating). Clinical outcome was evaluated using Oxford Knee Score. For radiological evaluation of the implants, patients sent us outpatient taken radiographs. A minimum follow-up of one year was required. Lastly, we analyzed postoperative complications and revision rates.

RESULTS

52 patients with revision knee arthroplasty (RKA) were recruited for final analysis, of whom, we had 17 septic RKAs (33%) and 35 aseptic cases of RKA (67%). The bone defects were grouped into 17 AORI Type 2A (32.7%), 14 Type 2B (26.9%) and 21 Type 3 (40.4%). After a mean follow-up of 22 months (13.2-34.8; SD = ± 10), we had 4 surgical revisions (7.7%), 2 septic and 2 aseptic cases. The mean Oxford Knee Score was 28.6 points (8-47; SD = ± 10). 22 of 28 radiographs (78.6%) showed regular positioning of the cones and TKAs at a mean follow-up of 16.8 months (13.2-34.8; SD = ± 6). Three patients (10.7%) showed slight radiolucencies in the bone-cement interfaces and 3 patients (10.7%) had beginning heterotopic ossifications.

CONCLUSIONS

This study shows the initial clinical results of calcium-phosphate-coated tibia cones showing a good functional outcome. Further research should focus on long-term clinical and radiological follow-up.

Midterm Outcomes of Tantalum Metal Cones for Severe Bone Loss in Complex Primary and Revision Total Knee Arthroplasty

Background

Managing severe periarticular bone loss poses a major challenge in complex primary and revision total knee arthroplasty (TKA). Impaction bone graft, structural allografts, metal augments, and mega prosthesis are some of the methods used to address major bone loss. Tantalum metal (TM) Cones (Zimmer, Warsaw, IN) were introduced as an alternative to address this cohort of patients. The advantages of these cones include excellent biocompatibility, high porosity with osteoconductive potential, and a modulus of elasticity between cortical and cancellous bone. In addition, it is bioactive and offers an intrinsically high friction fit.

Methods

A cohort of 62 patients with severe distal femoral and proximal tibial bone loss were operated for primary and revision TKA between January 2007 and December 2014 and followed up for a mean period of 108.5 months (range: 60-156 months). Preoperative and postoperative range of motion and Knee Society score were documented. Postoperatively long leg X-rays were performed at each follow-up visit to determine osteointegration, evidence of loosening, and migration.

Results

The range of motion and Knee Society score improved considerably from preoperative a value of 63.9 ± 13.9° and 52 ± 14.9 to 102.1 ± 9.9° and 76.1 ± 10.03, respectively, at the final follow-up visit in the primary cohort and 52.14 ± 13.3° and 38.1 ± 9.1 to 92 ± 8° and 68.5 ± 4.3, respectively, in the revision cohort. Serial radiographs demonstrated complete osteointegration of the TM cones at the final follow-up.

Conclusions

Our study demonstrates excellent midterm survivorship of TM cones with predictable osteointegration and good outcomes (clinical and radiological) in treatment of severe femoral and tibial metaphyseal bone defects in complex primary and revision TKAs.

Trabecular Metal Cones Combined With Short Cemented Stem Allow Favorable Outcomes in Aseptic Revision Total Knee Arthroplasty

BACKGROUND

The purpose of this study was to compare the functional outcomes and implant survivorship at a minimum of 5 years of follow-up of several reconstruction techniques with or without metaphyseal cone and stems of variable length.

METHODS

A retrospective comparative matched analysis was performed from 2 prospectively collected databases. Only patients who underwent revision total knee arthroplasty procedures for aseptic causes using a single design of rotating hinge knee with a minimum of 5 years of follow-up were analyzed. Patients were separated into 3 groups: trabecular metal (TM) cones + short cemented stems (TM + short stem [SS]), TM cones + long uncemented stems (TM + long stem [LS]), and no cone (NC) + long uncemented stems (NC + LS). A matching process based on age (±5 years) was realized.

RESULTS

About 99 patients were included; 33 in the TM + SS group, 33 in the TM + LS group, and 33 in the NC + LS group. The mean time of follow-up was 9.3 years. A significant difference of the improvement of subscale pain, symptom, activities of daily living, quality of life of the Knee Injury and Osteoarthritis Outcome score and knee, function of the Knee Society Score was observed in favor of TM + SS group compared with the 2 other groups. At 8 years of survivorship, the components free of revision for any cause were 90.9% for the TM + SS group, 84.9% for the TM + LS group, and 90.6% for the NC + LS group.

CONCLUSION

The use of a short cemented tibial stem combined with a TM cone in revision total knee arthroplasty offers identical survival rate with better functional outcome compared with the use of a long uncemented stem associated with TM cones or metallic augments at a minimum of 5 years of follow-up.

Risk factors for aseptic loosening in complex revision total knee arthroplasty using rotating hinge implants

PURPOSE

This study aimed to determine the risk factors of aseptic loosening (AL) in complex revision total knee arthroplasty (TKA) cases using rotating hinge knee prosthesis.

METHODS

Patients who had undergone re-revision rotating hinge prosthesis surgery between January 2012 and December 2017 were included. Parameters related to AL were retrospectively reviewed. For this purpose, 31 aseptic loosening patients and 30 control patients were included in the study. Various risk factors were evaluated. Risk factors for AL after re-revision were determined using univariate and multiple logistic regression analyses.

RESULTS

Thirty-one AL patients and 30 control patients were included. In the AL group, tibial tantalum cone and impaction grafting were performed significantly less frequently than the control group (p = 0.002 and p < 0.001). Logistic regression analysis revealed that smoking, right-sided TKA, and large femoral canal anteroposterior diameter were factors that increased the risk of AL after re-revision, while tibial tantalum cone decreased the risk of loosening. Smokers had an 11.847-fold higher risk for AL; right-sided TKA led to a 4.594-fold higher risk for AL. However, the presence of a tibial tantalum cone was associated with an 8.403-fold lower risk for AL.

CONCLUSIONS

We conclude that smoking, right-sided prosthesis, and large femoral canal diameter increased the risk of AL, while tantalum cone and impaction grafting reduced this risk in patients who underwent re-revision surgery with rotating hinge prosthesis after TKA.

Comparative Biomechanical In Vitro Study of Different Modular Total Knee Arthroplasty Revision Stems With Bone Defects

BACKGROUND

The aim of this study is to investigate the effects of different stem lengths and types including cones on primary stability in revision total knee arthroplasty with different femoral bone defects and fixation methods in order to maximize bone preservation. It is hypothesized that longer stems provide little additional mechanical stability.

METHODS

Thirty-five human femurs were investigated. A distal bone defect, Anderson Orthopedic Research Institute classification (s. 33) type-F2a, was created in group 1-3 and type-F3 in group 4-6. A cemented, rotating hinge femoral component was combined with different stems (100 and 160 mm total or hybrid cemented cones, or a 100-mm custom-made anatomical cone stem). The femora were loaded according to in vivo loading during gait. Relative movements were measured to investigate primary stability. Pull-out testing was used to obtain a parameter for the primary stability of the construct.

RESULTS

Relative movements were small and similar in all groups (<40 μm). For small defect, the pull-out forces of cemented long (4583 N) and short stems (4650 N) were similar and about twice as high as those of uncemented stems (2221 N). For large defects, short cemented stems with cones showed the highest pull-out forces (5500 N). Long uncemented stems (3324 N) and anatomical cone stems (3990 N) showed similar pull-out forces.

CONCLUSION

All tested stems showed small relative movements. Long cemented stems show no advantages to short cemented stems in small bone defects. The use of cones or an anatomical cone stem with hybrid cementation seems to offer good stability even for larger bone defects. The use of a short cemented stem (with or without cone) may be a suitable choice with a high potential for bone preservation in total knee arthroplasty revision with respective bone defects.

Midterm Results After Tantalum Cones in 1-Stage Knee Exchange for Periprosthetic Joint Infection: A Single-Center Study

BACKGROUND

The use of tantalum cones to reconstruct extensive bone defects in revision total knee arthroplasty has been established. We aimed to evaluate the midterm results after 1-stage knee exchange for periprosthetic joint infection using tantalum cones.

METHODS

Seventy-two patients (mean age, 70 ± 8.2 years) treated with a 1-stage exchange for infected total knee arthroplasty using porous tantalum cones, between 2011 and 2016, were retrospectively included. Either rotating or pure hinge system in combination with femoral and/or tibial cones was used. Survivorship analysis (septic and aseptic) was performed. Prospectively, functional outcome was assessed at a mean follow-up of 49.9 ± 18.8 months (range, 24-88).

RESULTS

A total of 15 patients (21%) were rerevised, 8 (11.1%) for infection and 7 (10%) for aseptic loosening, requiring cone exchange in 12 patients (17%). Cone-related survival free from any revision was 83% ± 3.8 standard deviation (95% confidence interval, 74-90), and infection-free survival was 89% ± 4.2 standard deviation (95% confidence interval, 76-93). No significant correlation was reported between the types of prosthesis used (P = .8) or implanted cones and failure (P = .6). History of a previous septic revision increased the risk of cone revision after the index surgery (P < .001). Preoperative Hospital for Special Surgery knee score improved from 47 ± 16 (range, 14-87) to 60 ± 17 (range, 24-84) points at the latest follow-up.

CONCLUSION

First study reports on outcomes of the 1-stage exchange using tantalum cones for knee periprosthetic joint infection with additional severe bone loss. Midterm cone-related and infection-free survival offered good results and provided reasonable functional outcomes.

Porous Tantalum and Titanium in Orthopedics: A Review

Porous metal is metal with special porous structures, which can offer high biocompatibility and low Young's modulus to satisfy the need for orthopedic applications. Titanium and tantalum are the most widely used porous metals in orthopedics due to their excellent biomechanical properties and biocompatibility. Porous titanium and tantalum have been studied and applied for a long history until now. Here in this review, various manufacturing methods of titanium and tantalum porous metals are introduced. Application of these porous metals in different parts of the body are summarized, and strengths and weaknesses of these porous metal implants in clinical practice are discussed frankly for future improvement from the viewpoint of orthopedic surgeons. Then according to the requirements from clinics, progress in research for clinical use is illustrated in four aspects. Various creative designs of microporous and functionally gradient structure, surface modification, and functional compound systems of porous metal are exhibited as reference for future research. Finally, the directions of orthopedic porous metal development were proposed from the clinical view based on the rapid progress of additive manufacturing. Controllable design of both macroscopic anatomical bionic shape and microscopic functional bionic gradient porous metal, which could meet the rigorous mechanical demand of bone reconstruction, should be developed as the focus. The modification of a porous metal surface and construction of a functional porous metal compound system, empowering stronger cell proliferation and antimicrobial and antineoplastic property to the porous metal implant, also should be taken into consideration.

Metaphyseal cones and sleeves in revision total knee arthroplasty: Two sides of the same coin? Complications, clinical and radiological results-a systematic review of the literature

Revision total knee arthroplasty (rTKA) is increasing of relevance in orthopaedic surgeon daily practice and this trend is likely to continue in the years ahead. The aim of this systematic review of English literature is to summarize and compare indications, complications, clinical and radiological results of metaphyseal cones and sleeves in management of bone loss in rTKA. Retrospective or prospective studies with at least 1 year of follow-up (FU) were included. The PRISMA 2009 flowchart and checklist were considered to edit the review. Clinical and radiological results, rates of intraoperative fractures, aseptic loosening, periprosthetic joint infection, septic failure, reoperations and re-revisions were extrapolated by the papers. Thirty-seven articles were included in the systematic review. Results of 927 cones (mean FU of 3.6 ± 1.4 years) and 1801 sleeves (mean FU of 4.5 ± 1.6 years) were analysed. The studies showed good clinical and functional outcomes. Cones and sleeves allowed a stable metaphyseal fixation. The aseptic survivorship of the implants was 97.3% in cones group and 97.8% in sleeves group. Metaphyseal cones and sleeves represent a viable option in management of type IIb and III AORI bone defects in aseptic and septic TKAr with overlapping survival rate. Further high-quality long-term studies would better clarify complications, clinical and radiological results of these promising techniques in revision total knee arthroplasty.

Are Metaphyseal Sleeves a Viable Option to Treat Bone Defect during Revision Total Knee Arthroplasty? A Systematic Review

Purpose  Bone loss is a challenging problem during revision total knee arthroplasty (TKA). Several studies have been published on the use of metaphyseal sleeves during revision TKA. Therefore, the aim of this systematic review was to summarize the clinical and radiographic outcomes of the use of metaphyseal sleeves in the setting of revision TKA. Methods  A comprehensive search of PubMed, MEDLINE, CINAHL, Cochrane, EMBASE, and Google Scholar was performed, covering the period between January 1, 2000, and August 12, 2017. Various combinations of the following key words were used: "metaphyseal," "sleeves," "knee," and "revision." A total of 10 studies were included in the present systematic review. Results  A total of 904 patients with 928 implants were recorded with a mean age of 69 years. They were evaluated at a mean follow-up of 45 months. Overall 1,413 sleeves, 888 in the tibia and 525 in the femur, were implanted. There were 36 septic re-revisions of the prosthetic components (4%). Five sleeves were found loose during septic re-revision; therefore, the rate of septic loosening of the sleeves was 0.35%. An aseptic re-revision of the prosthetic components was performed 27 times (3%). Ten sleeves were found loose during aseptic re-revision; therefore, the rate of aseptic loosening of the sleeves was 0.7%. Intraoperative fractures occurred 44 times (3.1%). Finally, clinical outcome was improved at final follow-up. Conclusion  Metaphyseal sleeves demonstrate high radiographic signs of osteointegration, low septic loosening rate, low intraoperative fractures rate, and a good-to-excellent clinical outcome. Hence, they are a valid option to treat large metaphyseal bone defect during revision TKA. Level of Evidence  This is a systematic review of level IV studies.

Curcumin reduces inflammation in knee osteoarthritis rats through blocking TLR4 /MyD88/NF-κB signal pathway

Preclinical Research & Development Curcumin has been shown to possess a series of beneficial effects, such as antiinflammatory, antioxidant, analgesic, and promoting healing. However, the effect and relative mechanism of curcumin on knee osteoarthritis (OA) have not been elucidated. The aim of this study is to explore the protective effect of curcumin on monosodium iodoacetate (MIA)-induced OA. Forty-eight rats were randomized into four experimental groups: control group, OA group, OA + PBS group, and OA + curcumin group, respectively. A single intraarticular injection of MIA was applied to establish the rat model of knee OA. Hematoxylin-eosin staining was used to evaluate histological changes of knee joint. The paw withdrawal threshold was collected and the expression of synovial fluid cytokine levels was measured by ELISA. The protein expression of TRL-4, MyD88, p-IκBα, NF-κB, TNF-α, IL-1β, and IL6 was measured by western blot. Treating with curcumin can significantly reduce joint diameter and Mankin's score, and increase the paw withdrawal threshold. The expression of synovial fluid inflammatory biomarkers, IL-6, IL-1β, and TNF-α in the OA + curcumin group were lower than that in OA and OA + PBS group. The protein expression of the TLR4 receptor was increased in the OA, OA + PBS, and OA + curcumin group compared to the control group. However, curcumin treatment can significantly decrease the expression of MyD88, p-IκBα, NF-κB, TNF-α, IL-1β, and IL6 in OA + curcumin group. These findings may indicate that curcumin could block TLR4/NF-κB signal pathway, and reduce inflammation level to prevent knee wound in OA rats. Curcumin may be a feasible kind of medicament in the treatment of knee OA.