Density-functional theory studies of acetone and propanal hydrogenation on Pt(111)

Ni-Foam-Structured Ni-Al2O3 Ensemble as an Efficient Catalyst for Gas-Phase Acetone Hydrogenation to Isopropanol

The free-standing Ni-Al₂O₃ ensemble derived from NiAl-layered double hydroxides (NiAl-LDHs) grown onto a Ni-foam has been developed for the exothermic gas-phase acetone hydrogenation to isopropanol. This approach works effectively and efficiently to achieve a unique combination of high activity/selectivity and enhanced heat/mass transfer stemmed from the Ni-foam. The outstanding catalyst is obtained by direct reduction of the un-calcined NiAl-LDH/Ni-foam, with a high turnover frequency of 0.90 s^-1, being capable of converting 90.8% acetone into isopropanol with almost 100% selectivity under stoichiometric H₂/acetone molar ratio, atmospheric pressure at 80 °C, and a WHSV_acetone of 10 h^-1. The catalyst derivation using the un-calcined NiAl-LDH/Ni-foam enables the Ni nanoparticles to be intertwined with Al₂O₃ to form a large Ni-Al₂O₃ interface, without interruption of impurities such as irreducible NiO (in the case of calcined NiAl-LDH/Ni-foam samples), which markedly improves the strong acetone adsorption next to the Ni⁰ hydrogenation sites, thereby leading to a dramatic improvement of catalyst activity.

A self-adjusting platinum surface for acetone hydrogenation

We show that platinum displays a self-adjusting surface that is active for the hydrogenation of acetone over a wide range of reaction conditions. Reaction kinetics measurements under steady-state and transient conditions at temperatures near 350 K, electronic structure calculations employing density-functional theory, and microkinetic modeling were employed to study this behavior over supported platinum catalysts. The importance of surface coverage effects was highlighted by evaluating the transient response of isopropanol formation following either removal of the reactant ketone from the feed, or its substitution with a similarly structured species. The extent to which adsorbed intermediates that lead to the formation of isopropanol were removed from the catalytic surface was observed to be higher following ketone substitution in comparison to its removal, indicating that surface species leading to isopropanol become more strongly adsorbed on the surface as the coverage decreases during the desorption experiment. This phenomenon occurs as a result of adsorbate-adsorbate repulsive interactions on the catalyst surface which adjust with respect to the reaction conditions. Reaction kinetics parameters obtained experimentally were in agreement with those predicted by microkinetic modeling when the binding energies, activation energies, and entropies of adsorbed species and transition states were expressed as a function of surface coverage of the most abundant surface intermediate (MASI, C₃H₆OH*). It is important that these effects of surface coverage be incorporated dynamically in the microkinetic model (e.g., using the Bragg-Williams approximation) to describe the experimental data over a wide range of acetone partial pressures.

Aldehyde trapping by self-propagating atom-exchange reactions on a gallium nitride monolayer: role of the molecule complexity

The design of novel gas sensors based on two-dimensional systems has grown rapidly in the last few years due to the remarkable reactivity of their surfaces.

Insights into the role of nanoalloy surface compositions toward catalytic acetone hydrogenation

A significant composition-dependent catalysis behavior was observed in catalytic acetone hydrogenation. Carbon supported PtRu alloy nanoparticles (NPs) with optimal surface composition achieved ultra-efficient and highly selective production of isopropyl alcohol.

Evidence for C-H...O=C bonding in coadsorbed aromatic-carbonyl systems on Pt(111)

The coadsorption of ethyl formate, acetone, and methyl pyruvate with benzene and naphthalene on Pt(111) was studied with reflection absorption infrared spectroscopy (RAIRS) and thermal desorption (TPD) measurements. Coadsorbed benzene or naphthalene are found to convert eta1- and eta2-states of ethyl formate and acetone into new states displaying slightly red-shifted carbonyl bands. Similarly, coadsorption converts the enediolate state of methyl pyruvate into a new adsorption geometry in which the carbonyl bands are silent. In each case, coadsorption of the aromatic leads to significantly modified carbonyl desorption spectra. The results suggest an attractive carbonyl-aromatic interaction that weakens or removes the direct interaction of the carbonyl function with the metal surface. The aromatic-carbonyl interaction is attributed to hydrogen bonding between C-H and C=O, enhanced by the chemisorption induced polarization of the aromatic.

Chemo−Regioselectivity in Heterogeneous Catalysis: Competitive Routes for CO and CC Hydrogenations from a Theoretical Approach

The usual empirical rule stating that the C=C bond is more reactive than the C=O group for catalytic hydrogenations of unsaturated aldehydes is invalidated from the present study. Density functional theory calculations of all the competitive hydrogenation routes of acrolein on Pt(111) reveals conversely that the attack at the C=O bond is systematically favored. The explanation of such catalytic behavior is the existence of metastable precursor states for the O-H bond formation showing that the attack at the oxygen atom follows a new preferential mechanism where the C=O moiety is not directly bonded with the Pt surface atoms, hence yielding an intermediate pathway between Langmuir-Hinshelwood and Rideal-Eley general types of mechanisms. When the whole catalytic cycle is considered, our results reconcile with experimental studies devoted to hydrogenation of acrolein on Pt, since the desorption step of the partially hydrogenated product (unsaturated alcohol versus saturated aldehyde) plays a key role for the selectivity.

Acetaldehyde on Pt(111) and Pt/Sn(111): A DFT Study of the Adsorption Structures and of the Vibrational Spectra

The relative stability of the eta1mu1 (atop) and eta2mu2 (di-sigma) geometries of acetaldehyde are compared on Pt(111) and on two PtSn alloys ((2 x 2) and (square root(3) x square root(3))R30 degrees) by means of density functional theory (DFT) calculations. At low coverage on Pt (1/9 ML), the two forms are equivalent in energy, with eta1mu1 being slightly more stable. At high coverage (1/4 and 1/3 ML), eta2mu2 is less competitive and acetaldehyde is adsorbed through the aldehydic hydrogen. The evolution of the adsorption energy with the coverage and the apparition of the structure adsorbed through the aldehydic hydrogen are explained by the existence of attractive dipole-dipole interactions. On PtSn, only the eta1mu1 geometry is stable with an adsorption energy equal to that on Pt, in agreement with temperature-programmed desorption (TPD) experiments. The calculated vibrational spectra allow us to conclude that the experimental spectrum corresponds to a mixture of eta1mu1 (majority) and eta2mu2 (minority) structures on Pt and to only eta1mu1 on PtSn. The various interactions and the relative stability of the species on Pt and PtSn are explained by the density of states (DOS) curves.