Electronic relaxation effects in condensed polyacenes: A high-resolution photoemission study

GW Plus Cumulant Approach for Predicting Core-Level Shakeup Satellites in Large Molecules

Recently, the GW approach has emerged as a valuable tool for computing deep core-level binding energies as measured in X-ray photoemission spectroscopy. However, GW fails to accurately predict shakeup satellite features, which arise from charge-neutral excitations accompanying the ionization. In this work, we extend the GW plus cumulant (GW + C) approach to molecular 1s excitations, deriving conditions under which GW + C can be reliably applied to shakeup processes. We present an efficient implementation with O(N4) scaling with respect to the system size N, within an all-electron framework based on numeric atom-centered orbitals. We demonstrate that decoupling the core and valence spaces is crucial when using localized basis functions. Additionally, we meticulously validate the basis set convergence of the satellite spectrum for 65 spectral functions and identify the importance of diffuse augmenting functions. To assess the accuracy, we apply our GW + C scheme to π-conjugated molecules containing up to 40 atoms, predicting dominant satellite features within 0.5 eV of experimental values. For the acene series, from benzene to pentacene, we demonstrate how GW + C provides critical insights into the interpretation of experimentally observed satellite features.

Competing pathways to aromaticity governed by amine dehydrogenation and metal-organic complexation in on-surface synthesis

We investigated the reactivity of a gem-dichlorovinyl-carbazole precursor in the on-surface synthesis approach. Our findings reveal that, on the Au(111) surface, the thermally-induced dehalogenation reaction led to the formation of cumulene dimers. Contrastingly, the more reactive Cu(111) surface promoted the formation of a polyheterocyclic compound exhibiting extended aromaticity. The latter was found to be related to the dehydrogenation of the amine groups, which did not occur on Au(111), thus promoting the different reactivity observed. At higher annealing temperature, selective C-H activation led to the formation of well-defined organometallic chains. In addition, we found that the amine complexation with metal adatom on Cu(111) was an inhibiting factor for the dimerization reaction, a challenge that could be overcome through proper control of the deposition conditions.

The C1s core levels of polycyclic aromatic hydrocarbons and styrenic polymers: A first-principles study

Understanding core level shifts in aromatic compounds is crucial for the correct interpretation of x-ray photoelectron spectroscopy (XPS) of polycyclic aromatic hydrocarbons (PAHs), including acenes, as well as of styrenic polymers, which are increasingly relevant for the microelectronic industry, among other applications. The effect of delocalization through π aromatic systems on the stabilization of valence molecular orbitals has been widely investigated in the past. However, little has been reported on the impact on the deeper C1s core energy levels. In this work, we use first-principles calculations at the level of many body perturbation theory to compute the C1s binding energies of several aromatic systems. We report a C1s red shift in PAHs and acenes of increasing size, both in the gas phase and in the molecular crystal. C1s red shifts are also calculated for stacked benzene and naphthalene pairs at decreasing intermolecular distances. A C1s red shift is in addition found between oligomers of poly(p-hydroxystyrene) and polystyrene of increasing length, which we attribute to ring-ring interactions between the side-chains. The predicted shifts are larger than common instrumental errors and could, therefore, be detected in XPS experiments.

Charge Localization in Acene Crystals from Ab Initio Electronic Structure

The performance of Koopmans-compliant hybrid functionals in reproducing the electronic structure of organic crystals is tested for a series of acene crystals. The calculated band gaps are found to be consistent with those achieved with the GW method at a fraction of the computational cost and in excellent accord with the experimental results at room temperature, when including the thermal renormalization. The energetics of excess holes and electrons reveals a struggle between polaronic localization and band-like delocalization. The consequences of these results on the transport properties of acene crystals are discussed.

Titanium(IV) Surface Complexes Bearing Chelating Catecholato Ligands for Enhanced Band-Gap Reduction

Protonolysis reactions between dimethylamido titanium(IV) catecholate [Ti(CAT)(NMe₂)₂]₂ and neopentanol or tris(tert-butoxy)silanol gave catecholato-bridged dimers [(Ti(CAT)(OCH₂tBu)₂)(HNMe₂)]₂ and [Ti(CAT){OSi(OtBu)₃}₂(HNMe₂)₂]₂, respectively. Analogous reactions using the dimeric dimethylamido titanium(IV) (3,6-di-tert-butyl)catecholate [Ti(CATtBu₂-3,6)(NMe₂)₂]₂ yielded the monomeric Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ and Ti(CATtBu₂-3,6)[OSi(OtBu)₃]₂(HNMe₂)₂. The neopentoxide complex Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ engaged in further protonolysis reactions with Si-OH groups and was consequentially used for grafting onto mesoporous silica KIT-6. Upon immobilization, the surface complex [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[KIT-6] retained the bidentate chelating geometry of the catecholato ligand. This convergent grafting strategy was compared with a sequential and an aqueous approach, which gave either a mixture of bidentate chelating species with a bipodally anchored Ti(IV) center along with other physisorbed surface species or not clearly identifiable surface species. Extension of the convergent and aqueous approaches to anatase mesoporous titania (m-TiO₂) enabled optical and electronic investigations of the corresponding surface species, revealing that the band-gap reduction is more pronounced for the bidentate chelating species (convergent approach) than for that obtained via the aqueous approach. The applied methods include X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and solid-state UV/vis spectroscopy. The energy-level alignment for the surface species from the aqueous approach, calculated from experimental data, accounts for the well-known type II excitation mechanism, whereas the findings indicate a distinct excitation mechanism for the bidentate chelating surface species of the material [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[m-TiO₂].

Stability of radical-functionalized gold surfaces by self-assembly and on-surface chemistry

We have investigated the radical functionalization of gold surfaces with a derivative of the perchlorotriphenylmethyl (PTM) radical using two methods: by chemisorption from the radical solution and by on-surface chemical derivation from a precursor. We have investigated the obtained self-assembled monolayers by photon-energy dependent X-ray photoelectron spectroscopy. Our results show that the molecules were successfully anchored on the surfaces. We have used a robust method that can be applied to a variety of materials to assess the stability of the functionalized interface. The monolayers are characterized by air and X-ray beam stability unprecedented for films of organic radicals. Over very long X-ray beam exposure we observed a dynamic nature of the radical-Au complex. The results clearly indicate that (mono)layers of PTM radical derivatives have the necessary stability to withstand device applications.

Binding and electronic level alignment of π-conjugated systems on metals

We review the binding and energy level alignment of π-conjugated systems on metals, a field which during the last two decades has seen tremendous progress both in terms of experimental characterization as well as in the depth of theoretical understanding. Precise measurements of vertical adsorption distances and the electronic structure together with ab initio calculations have shown that most of the molecular systems have to be considered as intermediate cases between weak physisorption and strong chemisorption. In this regime, the subtle interplay of different effects such as covalent bonding, charge transfer, electrostatic and van der Waals interactions yields a complex situation with different adsorption mechanisms. In order to establish a better understanding of the binding and the electronic level alignment of π-conjugated molecules on metals, we provide an up-to-date overview of the literature, explain the fundamental concepts as well as the experimental techniques and discuss typical case studies. Thereby, we relate the geometric with the electronic structure in a consistent picture and cover the entire range from weak to strong coupling.

Synthesis of corrugated C-based nanostructures by Br-corannulene oligomerization

The structure and electronic properties of carbon-based nanostructures obtained by metal surface assisted synthesis is highly dependent on the nature of the precursor molecule.

Electronic properties and structure of single crystal perylene

The transport properties of electronic devices made from single crystalline molecular semiconductors typically outperform those composed of thin-films of the same material. To further understand the superiority of these extrinsic device properties, an understanding of the intrinsic electronic structure and properties of the organic semiconductor is necessary. An investigation of the electronic structure and properties of single crystal α-phase perylene (C20H12), a five-ringed aromatic molecule, is presented using angle-resolved ultraviolet photoemission, x-ray photoelectron spectroscopy (XPS), and field-effect transistor measurements. Key aspects of the electronic structure of single crystal α-perylene critical to charge transport are determined, including the energetic location of the highest occupied molecular orbital (HOMO), the HOMO bandwidth, and surface work function. In addition, using high resolution XPS, we can distinguish between inequivalent carbon atoms within the perylene crystal and, from the shake-up satellite structure in XPS, gain insight into the intramolecular properties in α-perylene. From the device measurements, the charge carrier mobility of α-perylene is found to depend on the device structure and the choice of dielectric, with values in the range of 10-3 cm2 V-1 s-1.

A Derivative of the Blatter Radical as a Potential Metal-Free Magnet for Stable Thin Films and Interfaces

Organic radicals are fascinating materials because of their unique properties, which make them suitable for a variety of applications. Their synthesis may be challenging, and big efforts have focused on chemical stability. However, introducing a new material in electronics not only requires chemically stable molecules but also stable monolayers and thin films in view of their use in devices. In this work, we have investigated the thin films of a derivative of the Blatter radical that was synthesized bearing in mind the thermodynamic factors that govern thin film stability. We have proved our concept by investigating the electronic structure, the paramagnetic character, and stability of the obtained films under UHV and ambient conditions by in situ X-ray photoelectron spectroscopy, ex situ atomic force microscopy, and electron paramagnetic resonance spectroscopy.

Substrate-induced effects in thin films of a potential magnet composed of metal-free organic radicals deposited on Si(111)

We deposit a paramagnetic pyrene derivative of the nitronyl nitroxide radical on Si(111). The molecules experience a strong chemical interaction with the substrate that influences the film growth. We also study the time evolution of the nitronyl nitroxide radical under a micro-focused soft X-ray beam, observing a stable radical as a product. This result hints at the possibility of using this class of materials in dosimeters and sensors.

Surface-confined 2D polymerization of a brominated copper-tetraphenylporphyrin on Au(111)

A coupling-limited approach for the Ullmann reaction-like on-surface synthesis of a two-dimensional covalent organic network starting from a halogenated metallo-porphyrin is demonstrated. Copper-octabromo-tetraphenylporphyrin molecules can diffuse and self-assemble when adsorbed on the inert Au(111) surface. Splitting-off of bromine atoms bonded at the macrocyclic core of the porphyrin starts at room temperature after the deposition and is monitored by X-ray photoelectron spectroscopy for different annealing steps. Direct coupling between the reactive carbon sites of the molecules is, however, hindered by the molecular shape. This leads initially to an ordered non-covalently interconnected supramolecular structure. Further heating to 300 °C and an additional hydrogen dissociation step is required to link the molecular macrocycles via a phenyl group and form large ordered polymeric networks. This approach leads to a close-packed covalently bonded network of overall good quality. The structures are characterized using scanning tunneling microscopy. Different kinds of lattice defects and, furthermore, the impact of polymerization on the HOMO-LUMO gap are discussed. Density functional theory calculations corroborate the interpretations and give further insight into the adsorption of the debrominated molecule on the surface and the geometry and coupling reaction of the polymeric structure.

Chemisorption, morphology, and structure of a n-type perylene diimide derivative at the interface with gold: influence on devices from thin films to single molecules

We have investigated thin films of a perylene diimide derivative with a cyano-functionalized core (PDI-8CN2) deposited on Au(111) single crystals from the monolayer to the multilayer regime. We found that PDI-8CN2 is chemisorbed on gold. The molecules experience a thickness-dependent reorientation, and a 2D growth mode with molecular stepped terraces is achieved adopting low deposition rates. The obtained results are discussed in terms of their impact on field effect devices, also clarifying why the use of substrate/contact treatments, decoupling PDI-8CN2 molecules from the substrate/contacts, is beneficial for such devices. Our results also suggest that perylene diimide derivatives with CN bay-functionalization are very promising candidates for single-molecule electronic devices.

Paramagnetic nitronyl nitroxide radicals on Al2O3(11-20) single crystals: nanoscale assembly, morphology, electronic structure, and paramagnetic character toward future applications

Aiming at future technological applications, we describe the interface and the thin film processes of a pyrene-substituted nitronyl nitroxide radical deposited on Al2O3(11-20) single crystals. Electronic properties, chemical environment at the interface, and morphology of the thin films have been investigated by a multitechnique approach. Spectroscopic and morphologic analyses indicate a Stranski-Krastanov growth mode and weak physisorption of the molecules on the surface. The deposition does not affect the paramagnetic character of the molecules. The results presented in this paper show not only that the investigated system is a promising candidate as a model for understanding thin film processes in purely organic-based magnets, but its characteristics are worth its future use in electronics, because the radical character of the molecules is completely preserved in the thin films.

Role of the substrate in electronic structure, molecular orientation, and morphology of organic thin films: diindenoperylene on rutile TiO2(110)

The results of our multitechnique investigation performed on diindenoperylene thin films deposited on rutile TiO2(110) show island growth, with crystallites nucleating preferentially along the [110] substrate crystallographic axis. The findings evidence that the films' properties at the interface are common to those found for a number of organic molecules deposited on the same substrate, revealing that the structural and morphological properties of organic thin films on rutile TiO2(110) are completely driven by its surface morphology.