Blind test of density-functional-based methods on intermolecular interaction energies

How do spin-scaled double hybrids designed for excitation energies perform for noncovalent excited-state interactions? An investigation on aromatic excimer models

Time-dependent double hybrids with spin-component or spin-opposite scaling to their second-order perturbative correlation correction have demonstrated competitive robustness in the computation of electronic excitation energies. Some of the most robust are those recently published by our group (M. Casanova-Páez, L. Goerigk, J. Chem. Theory Comput. 2021, 20, 5165). So far, the implementation of these functionals has not allowed correctly calculating their ground-state total energies. Herein, we define their correct spin-scaled ground-state energy expressions which enables us to test our methods on the noncovalent excited-state interaction energies of four aromatic excimers. A range of 22 double hybrids with and without spin scaling are compared to the reasonably accurate wavefunction reference from our previous work (A. C. Hancock, L. Goerigk, RSC Adv. 2023, 13, 35964). The impact of spin scaling is highly dependent on the underlying functional expression, however, the smallest overall errors belong to spin-scaled functionals with range separation: SCS- and SOS- ω PBEPP86, and SCS-RSX-QIDH. We additionally determine parameters for DFT-D3(BJ)/D4 ground-state dispersion corrections of these functionals, which reduce errors in most cases. We highlight the necessity of dispersion corrections for even the most robust TD-DFT methods but also point out that ground-state based corrections are insufficient to completely capture dispersion effects for excited-state interaction energies.

Range Separation Method for Density Functional Theory Based on Two-Electron Infinite-Order Two-Component Hamiltonian

The range separation method for density functional theory (DFT) was extended to a two-component relativistic theory based on the unitary transformation of one- and two-electron operators and a density operator. In the framework of the spin-free infinite-order two-component Hamiltonian, we implemented several types of two-electron integrals of range-separated two-electron interactions arising from the unitary transformation. Numerical assessments were performed using long-range-corrected (LC)-DFT, which utilizes the range separation of an exchange functional. The present method successfully reproduced the reference values obtained by the four-component LC-DFT calculations when the whole unitary transformations of one-electron, full-range, and range-separated two-electron operators and a density operator were considered. An efficient scheme for the unitary transformation, which is termed the local unitary transformation (LUT), was also applied to the range-separated two-electron term and other operators. The LUT method reduced the computational costs of the LC-DFT calculations significantly without any loss of accuracy.

Toward a correct treatment of core properties with local hybrid functionals

In local hybrid functionals (LHs), a local mixing function (LMF) determines the position-dependent exact-exchange admixture. We report new LHs that focus on an improvement of the LMF in the core region while retaining or partly improving upon the high accuracy in the valence region exhibited by the LH20t functional. The suggested new pt-LMFs are based on a Padé form and modify the previously used ratio between von Weizsäcker and Kohn-Sham local kinetic energies by different powers of the density to enable flexibly improved approximations to the correct high-density and iso-orbital limits relevant for the innermost core region. Using TDDFT calculations for a set of K-shell core excitations of second- and third-period systems including accurate state-of-the-art relativistic orbital corrections, the core part of the LMF is optimized, while the valence part is optimized as previously reported for test sets of atomization energies and reaction barriers (Haasler et al., J Chem Theory Comput 2020, 16, 5645). The LHs are completed by a calibration function that minimizes spurious nondynamical correlation effects caused by the gauge ambiguities of exchange-energy densities, as well as by B95c meta-GGA correlation. The resulting LH23pt functional relates to the previous LH20t functional but specifically improves upon the core region.

Do Optimally Tuned Range-Separated Hybrid Functionals Require a Reparametrization of the Dispersion Correction? It Depends

For ground- and excited-state studies of large molecules, it is the state of the art to combine (time-dependent) DFT with dispersion-corrected range-separated hybrid functionals (RSHs), which ensures an asymptotically correct description of exchange effects and London dispersion. Specifically for studying excited states, it is common practice to tune the range-separation parameter ω (optimal tuning), which can further improve the accuracy. However, since optimal tuning essentially changes the functional, it is unclear if and how much the parameters used for the dispersion correction depend on the chosen ω value. To answer this question, we explore this interdependency by refitting the DFT-D4 dispersion model for six established RSHs over a wide range of ω values (0.05-0.45 a0-1) using a set of noncovalently bound molecular complexes. The results reveal some surprising differences among the investigated functionals: While PBE-based RSHs and ωB97M-D4 generally exhibit a weak interdependency and robust performance over a wide range of ω values, B88-based RSHs, specifically LC-BLYP, are strongly affected. For these, even a minor reduction of ω from the default value manifests in strong systematic overbinding and poor performance in the typical range of optimally tuned ω values. Finally, we discuss strategies to mitigate these issues and reflect the results in the context of the employed D4 parameter optimization algorithm and fit set, outlining strategies for future improvements.

Range-Separated Local Hybrid Functionals with Small Fractional-Charge and Fractional-Spin Errors: Escaping the Zero-Sum Game of DFT Functionals

Extending recent developments on strong-correlation (sc) corrections to local hybrid functionals to the recent accurate ωLH22t range-separated local hybrid, a series of highly flexible strong-correlation-corrected range-separated local hybrids (scRSLHs) has been constructed and evaluated. This has required the position-dependent reduction of both short- and long-range exact-exchange admixtures in regions of space characterized by strong static correlations. Using damping procedures provides scRSLHs that retain largely the excellent performance of ωLH22t for weakly correlated situations and, in particular, for accurate quasiparticle energies of a wide variety of systems while reducing dramatically static-correlation errors, e.g., in stretched-bond situations. An additional correction to the local mixing function to reduce delocalization errors in abnormal open-shell situations provides further improvements in thermochemical and kinetic parameters, making scRSLH functionals such as ωLH23tdE or ωLH23tdP promising tools for complex molecular or condensed-phase systems, where low fractional-charge and fractional-spin errors are simultaneously important. The proposed rung 4 functionals thereby largely escape the usual zero-sum game between these two quantities and are expected to open new areas of accurate computations by Kohn-Sham DFT. At the same time, they require essentially no extra computational effort over the underlying ωLH22t functional, which means that their use is only moderately more demanding than that of global, local, or range-separated hybrid functionals.

H2O-HCN complex: A new potential energy surface and intermolecular rovibrational states from rigorous quantum calculations

In this work the H2O-HCN complex is quantitatively characterized in two ways. First, we report a new rigid-monomer 5D intermolecular potential energy surface (PES) for this complex, calculated using the symmetry-adapted perturbation theory based on density functional theory method. The PES is based on 2833 ab initio points computed employing the aug-cc-pVQZ basis set, utilizing the autoPES code, which provides a site-site analytical fit with the long-range region given by perturbation theory. Next, we present the results of the quantum 5D calculations of the fully coupled intermolecular rovibrational states of the H2O-HCN complex for the total angular momentum J values of 0, 1, and 2, performed on the new PES. These calculations rely on the quantum bound-state methodology developed by us recently and applied to a variety of noncovalently bound binary molecular complexes. The vibrationally averaged ground-state geometry of H2O-HCN determined from the quantum 5D calculations agrees very well with that from the microwave spectroscopic measurements. In addition, the computed ground-state rotational transition frequencies, as well as the B and C rotational constants calculated for the ground state of the complex, are in excellent agreement with the experimental values. The assignment of the calculated intermolecular vibrational states of the H2O-HCN complex is surprisingly challenging. It turns out that only the excitations of the intermolecular stretch mode can be assigned with confidence. The coupling among the angular degrees of freedom (DOFs) of the complex is unusually strong, and as a result most of the excited intermolecular states are unassigned. On the other hand, the coupling of the radial, intermolecular stretch mode and the angular DOFs is weak, allowing straightforward assignment of the excitation of the former.

Assessment of the nonempirical r2SCAN-QIDH double-hybrid density functional against large and diverse datasets

We update the Quadratic Integrand Double-Hybrid (QIDH) model [J. Chem. Phys. 141, 031101 (2014)] by incorporating the nonempirical restored-regularized Strongly Constrained and Appropriately Normed (r2SCAN) meta-generalized gradient approximation exchange-correlation functional, thus devising a robust density functional approximation free of any empirical parameter and incorporating all the constraints so far known for the exchange-correlation kernel. We assessed the new r2SCAN-QIDH expression on the GMTKN55 database and further extend its application to various types of non-covalent interactions (e.g., S66 × 8, O24 × 5). The assessment done shows that the model becomes very competitive in accuracy with respect to parent exchange-correlation functionals of any type, but without relying on any fitted parameter or numerical training.

Competition Between the Two σ-Holes in the Formation of a Chalcogen Bond

A chalcogen atom Y contains two separate σ-holes when in a R₁ YR₂ molecular bonding pattern. Quantum chemical calculations consider competition between these two σ-holes to engage in a chalcogen bond (ChB) with a NH₃ base. R groups considered include F, Br, I, and tert-butyl (tBu). Also examined is the situation where the Y lies within a chalcogenazole ring, where its neighbors are C and N. Both electron-withdrawing substituents R₁ and R₂ act cooperatively to deepen the two σ-holes, but the deeper of the two holes consistently lies opposite to the more electron-withdrawing group, and is also favored to form a stronger ChB. The formation of two simultaneous ChBs in a triad requires the Y atom to act as double electron acceptor, and so anti-cooperativity weakens each bond relative to the simple dyad. This effect is such that some of the shallower σ-holes are unable to form a ChB at all when a base occupies the other site.

Full Implementation, Optimization, and Evaluation of a Range-Separated Local Hybrid Functional with Wide Accuracy for Ground and Excited States

We report the first full and efficient implementation of range-separated local hybrid functionals (RSLHs) into the TURBOMOLE program package. This enables the computation of ground-state energies and nuclear gradients as well as excitation energies. Regarding the computational effort, RSLHs scale like regular local hybrid functionals (LHs) with system or basis set size and increase timings by a factor of 2-3 in total. An advanced RSLH, ωLH22t, has been optimized for atomization energies and reaction barriers. It is an extension of the recent LH20t local hybrid and is based on short-range PBE and long-range HF exchange-energy densities, a pig2 calibration function to deal with the gauge ambiguity of exchange-energy densities, and reoptimized B95c correlation. ωLH22t has been evaluated for a wide range of ground-state and excited-state quantities. It further improves upon the already successful LH20t functional for the GMTKN55 main-group energetics test suite, and it outperforms any global hybrid while performing close to the top rung-4 functional, ωB97M-V, for these evaluations when augmented by D4 dispersion corrections. ωLH22t performs excellently for transition-metal reactivity and provides good balance between delocalization errors and left-right correlation for mixed-valence systems, with a somewhat larger bias toward localized states compared to LH20t. It approaches the accuracy of the best local hybrids to date for core, valence singlet and triplet, and Rydberg excitation energies while improving strikingly on intra- and intermolecular charge-transfer excitations, comparable to the most successful range-separated hybrids available.

ωB97X-3c: A composite range-separated hybrid DFT method with a molecule-optimized polarized valence double-ζ basis set

A new composite density functional theory (DFT) method is presented. It is based on ωB97X-V as one of the best-performing density functionals for the GMTKN55 thermochemistry database and completes the family of "3c" methods toward range-separated hybrid DFT. This method is consistently available for all elements up to Rn (Z = 1-86). Its further key ingredients are a polarized valence double-ζ (vDZP) Gaussian basis set, which was fully optimized in molecular DFT calculations, in combination with large-core effective core potentials and a specially adapted D4 dispersion correction. Unlike most existing double-ζ atomic orbital sets, vDZP shows only small basis set superposition errors (BSSEs) and can compete with standard sets of triple-ζ quality. Small residual BSSE effects are efficiently absorbed by the D4 damping scheme, which overall eliminates the need for an explicit treatment or empirical corrections for BSSE. Thorough tests on a variety of thermochemistry benchmark sets show that the new composite method, dubbed ωB97X-3c, is on par with or even outperforms standard hybrid DFT methods in a quadruple-zeta basis set at a small fraction of the computational cost. Particular strengths of this method are the description of non-covalent interactions and barrier heights, for which it is among the best-performing density functionals overall.

Spin-State Splittings in 3d Transition-Metal Complexes Revisited: Benchmarking Approximate Methods for Adiabatic Spin-State Energy Differences in Fe(II) Complexes

The CASPT2+δMRCI composite approach reported in a companion paper has been extended and used to provide high-quality reference data for a series of adiabatic spin gaps (defined as ΔE = E_quintet - E_singlet) of [Fe^IIL₆]²⁺ complexes (L = CNH, CO, NCH, NH₃, H₂O), either at nonrelativistic level or including scalar relativistic effects. These highly accurate data have been used to evaluate the performance of various more approximate methods. Coupled-cluster theory with singles, doubles, and perturbative triples, CCSD(T), is found to agree well with the new reference data for Werner-type complexes but exhibits larger underestimates by up to 70 kJ/mol for the π-acceptor ligands, due to appreciable static correlation in the low-spin states of these systems. Widely used domain-based local CCSD(T) calculations, DLPNO-CCSD(T), are shown to depend very sensitively on the cutoff values used to construct the localized domains, and standard values are not sufficient. A large number of density functional approximations have been evaluated against the new reference data. The B2PLYP double hybrid gives the smallest deviations, but several functionals from different rungs of the usual ladder hierarchy give mean absolute deviations below 20 kJ/mol. This includes the B97-D semilocal functional, the PBE0* global hybrid with 15% exact-exchange admixture, as well as the local hybrids LH07s-SVWN and LH07t-SVWN. Several further functionals achieve mean absolute errors below 30 kJ/mol (M06L-D4, SSB-D, B97-1-D4, LC-ωPBE-D4, LH12ct-SsirPW92-D4, LH12ct-SsifPW92-D4, LH14t-calPBE-D4, LHJ-HFcal-D4, and several further double hybrids) and thereby also still overall outperform CCSD(T) or uncorrected CASPT2. While exact-exchange admixture is a crucial factor in favoring high-spin states, the present evaluations confirm that other aspects can be important as well. A number of the better-performing functionals underestimate the spin gaps for the π-acceptor ligands but overestimate them for L = NH₃, H₂O. In contrast to a previous suggestion, non-self-consistent density functional theory (DFT) computations on top of Hartree-Fock orbitals are not a promising path to produce accurate spin gaps in such complexes.

Local Hybrid Functional Applicable to Weakly and Strongly Correlated Systems

The recent idea (Wodyński, A.; Arbuznikov, A. V.; Kaupp M. J. Chem. Phys. 2021, 155, 144101) to augment local hybrid functionals by a strong-correlation (sc) factor obtained from the adiabatic connection in the spirit of the KP16 model has been extended and applied to generate the accurate sc-corrected local hybrid functional scLH22t. By damping small values of the ratio between nondynamical and dynamical correlation entering the correction factor, it has become possible to avoid double counting of nondynamical correlation for weakly correlated situations and thereby preserve the excellent accuracy of the underlying LH20t local hybrid for such cases almost perfectly. On the other hand, scLH22t improves substantially over LH20t in reducing fractional-spin errors (FSEs), in providing improved spin-restricted bond dissociation curves, and in treating some typical systems with multireference character. The obtained FSEs are similar to those of the KP16/B13 model and slightly larger than for B13, but performance for weakly correlated systems is better than for these two related methods, which are also difficult to use self-consistently. The recent DM21 functional based on the training of a deep neural network still performs somewhat better than scLH22t but allows no physical insights into the origins of reduced FSEs. Examination of local mixing functions (LMFs) for the corrected scLH22t and uncorrected LH20t functionals provides further insights: in weakly correlated situations, the LMF remains essentially unchanged. Strong-correlation effects manifest in a reduction of the LMF values in certain regions of space, even to the extent of producing negative LMF values. It is suggested that this is the mechanism by which also DM21, which may be viewed as a range-separated local hybrid, is able to reduce FSEs.

Physical mechanisms of intermolecular interactions from symmetry-adapted perturbation theory

Symmetry-adapted perturbation theory (SAPT) is a method for computational studies of noncovalent interactions between molecules. This method will be discussed here from the perspective of establishing the paradigm for understanding mechanisms of intermolecular interactions. SAPT interaction energies are obtained as sums of several contributions. Each contribution possesses a clear physical interpretation as it results from some specific physical process. It also exhibits a specific dependence on the intermolecular separation R. The four major contributions are the electrostatic, induction, dispersion, and exchange energies, each due to a different mechanism, valid at any R. In addition, at large R, SAPT interaction energies are seamlessly connected with the corresponding terms in the asymptotic multipole expansion of interaction energy in inverse powers of R. Since such expansion explicitly depends on monomers' multipole moments and polarizabilities, this connection provides additional insights by rigorously relating interaction energies to monomers' properties.

Optimization of the r2SCAN-3c Composite Electronic-Structure Method for Use with Slater-Type Orbital Basis Sets

The "Swiss army knife" composite density functional electronic-structure method r²SCAN-3c (J. Chem. Phys. 2021, 154, 064103) is extended and optimized for the use with Slater-type orbital basis sets. The meta generalized-gradient approximation (meta-GGA) functional r²SCAN by Furness et al. is combined with a tailor-made polarized triple-ζ Slater-type atomic orbital (STO) basis set (mTZ2P), the semiclassical London dispersion correction (D4), and a geometrical counterpoise (gCP) correction. Relativistic effects are treated explicitly with the scalar-relativistic zeroth-order regular approximation (SR-ZORA). The performance of the new implementation is assessed on eight geometry and 74 energy benchmark sets, including the extensive GMTKN55 database as well as recent sets such as ROST61 and IONPI19. In geometry optimizations, the STO-based r²SCAN-3c is either on par with or more accurate than the hybrid density functional approximation M06-2X-D3(0)/TZP. In energy calculations, the overall accuracy is similar to the original implementation of r²SCAN-3c with Gaussian-type atomic orbitals (GTO), but basic properties, intermolecular noncovalent interactions, and barrier heights are better described with the STO approach, resulting in a lower weighted mean absolute deviation (WTMAD-2(STO) = 7.15 vs 7.50 kcal mol^-1 with the original method) for the GMTKN55 database. The STO-optimized r²SCAN-3c outperforms many conventional hybrid/QZ approaches in most common applications at a fraction of their cost. The reliable, robust, and accurate r²SCAN-3c implementation with STOs is a promising alternative to the original implementation with GTOs and can be generally used for a broad field of quantum chemical problems.

Reliable crystal structure predictions from first principles

An inexpensive and reliable method for molecular crystal structure predictions (CSPs) has been developed. The new CSP protocol starts from a two-dimensional graph of crystal’s monomer(s) and utilizes no experimental information. Using results of quantum mechanical calculations for molecular dimers, an accurate two-body, rigid-monomer ab initio-based force field (aiFF) for the crystal is developed. Since CSPs with aiFFs are essentially as expensive as with empirical FFs, tens of thousands of plausible polymorphs generated by the crystal packing procedures can be optimized. Here we show the robustness of this protocol which found the experimental crystal within the 20 most stable predicted polymorphs for each of the 15 investigated molecules. The ranking was further refined by performing periodic density-functional theory (DFT) plus dispersion correction (pDFT+D) calculations for these 20 top-ranked polymorphs, resulting in the experimental crystal ranked as number one for all the systems studied (and the second polymorph, if known, ranked in the top few). Alternatively, the polymorphs generated can be used to improve aiFFs, which also leads to rank one predictions. The proposed CSP protocol should result in aiFFs replacing empirical FFs in CSP research.

Developing theoretical frameworks to predict new polymorphs is highly desirable. Here the authors present an ab initio based force-field approach for crystal structure prediction offering a dramatic computational speed-up over fully ab initio schemes.

Dispersion Interactions in Exciton-Localized States. Theory and Applications to π-π* and n-π* Excited States

We address the problem of intermolecular interaction energy calculations in molecular complexes with localized excitons. Our focus is on the correct representation of the dispersion energy. We derive an extended Casimir-Polder formula for direct computation of this contribution through second order in the intermolecular interaction operator V̂. An alternative formula, accurate to infinite order in V̂, is derived within the framework of the adiabatic connection (AC) theory. We also propose a new parametrization of the VV10 nonlocal correlation density functional, so that it corrects the CASSCF energy for the dispersion contribution and can be applied to excited-state complexes. A numerical investigation is carried out for benzene, pyridine, and peptide complexes with the local exciton corresponding to the lowest π–π* or n– π* states. The extended Casimir-Polder formula is implemented in the framework of multiconfigurational symmetry-adapted perturbation theory, SAPT(MC). A SAPT(MC) analysis shows that the creation of a localized exciton affects mostly the electrostatic component of the interaction energy of investigated complexes. Nevertheless, the changes in Pauli repulsion and dispersion energies cannot be neglected. We verify the performance of several perturbation- and AC-based methods. Best results are obtained with a range-separated variant of an approximate AC approach employing extended random phase approximation and CASSCF wave functions.

Small-Basis Set Density-Functional Theory Methods Corrected with Atom-Centered Potentials

Density functional theory (DFT) is currently the most popular method for modeling noncovalent interactions and thermochemistry. The accurate calculation of noncovalent interaction energies, reaction energies, and barrier heights requires choosing an appropriate functional and, typically, a relatively large basis set. Deficiencies of the density-functional approximation and the use of a limited basis set are the leading sources of error in the calculation of noncovalent and thermochemical properties in molecular systems. In this article, we present three new DFT methods based on the BLYP, M06-2X, and CAM-B3LYP functionals in combination with the 6-31G* basis set and corrected with atom-centered potentials (ACPs). ACPs are one-electron potentials that have the same form as effective-core potentials, except they do not replace any electrons. The ACPs developed in this work are used to generate energy corrections to the underlying DFT/basis-set method such that the errors in predicted chemical properties are minimized while maintaining the low computational cost of the parent methods. ACPs were developed for the elements H, B, C, N, O, F, Si, P, S, and Cl. The ACP parameters were determined using an extensive training set of 118655 data points, mostly of complete basis set coupled-cluster level quality. The target molecular properties for the ACP-corrected methods include noncovalent interaction energies, molecular conformational energies, reaction energies, barrier heights, and bond separation energies. The ACPs were tested first on the training set and then on a validation set of 42567 additional data points. We show that the ACP-corrected methods can predict the target molecular properties with accuracy close to complete basis set wavefunction theory methods, but at a computational cost of double-ζ DFT methods. This makes the new BLYP/6-31G*-ACP, M06-2X/6-31G*-ACP, and CAM-B3LYP/6-31G*-ACP methods uniquely suited to the calculation of noncovalent, thermochemical, and kinetic properties in large molecular systems.

Fast and Accurate Quantum Mechanical Modeling of Large Molecular Systems Using Small Basis Set Hartree-Fock Methods Corrected with Atom-Centered Potentials

There has been significant interest in developing fast and accurate quantum mechanical methods for modeling large molecular systems. In this work, by utilizing a machine learning regression technique, we have developed new low-cost quantum mechanical approaches to model large molecular systems. The developed approaches rely on using one-electron Gaussian-type functions called atom-centered potentials (ACPs) to correct for the basis set incompleteness and the lack of correlation effects in the underlying minimal or small basis set Hartree-Fock (HF) methods. In particular, ACPs are proposed for ten elements common in organic and bioorganic chemistry (H, B, C, N, O, F, Si, P, S, and Cl) and four different base methods: two minimal basis sets (MINIs and MINIX) plus a double-ζ basis set (6-31G*) in combination with dispersion-corrected HF (HF-D3/MINIs, HF-D3/MINIX, HF-D3/6-31G*) and the HF-3c method. The new ACPs are trained on a very large set (73 832 data points) of noncovalent properties (interaction and conformational energies) and validated additionally on a set of 32 048 data points. All reference data are of complete basis set coupled-cluster quality, mostly CCSD(T)/CBS. The proposed ACP-corrected methods are shown to give errors in the tenths of a kcal/mol range for noncovalent interaction energies and up to 2 kcal/mol for molecular conformational energies. More importantly, the average errors are similar in the training and validation sets, confirming the robustness and applicability of these methods outside the boundaries of the training set. In addition, the performance of the new ACP-corrected methods is similar to complete basis set density functional theory (DFT) but at a cost that is orders of magnitude lower, and the proposed ACPs can be used in any computational chemistry program that supports effective-core potentials without modification. It is also shown that ACPs improve the description of covalent and noncovalent bond geometries of the underlying methods and that the improvement brought about by the application of the ACPs is directly related to the number of atoms to which they are applied, allowing the treatment of systems containing some atoms for which ACPs are not available. Overall, the ACP-corrected methods proposed in this work constitute an alternative accurate, economical, and reliable quantum mechanical approach to describe the geometries, interaction energies, and conformational energies of systems with hundreds to thousands of atoms.

Symmetry-Adapted Perturbation Theory Based on Multiconfigurational Wave Function Description of Monomers

We present a formulation of the multiconfigurational (MC) wave function symmetry-adapted perturbation theory (SAPT). The method is applicable to noncovalent interactions between monomers which require a multiconfigurational description, in particular when the interacting system is strongly correlated or in an electronically excited state. SAPT(MC) is based on one- and two-particle reduced density matrices of the monomers and assumes the single-exchange approximation for the exchange energy contributions. Second-order terms are expressed through response properties from extended random phase approximation (ERPA). The dispersion components of SAPT(MC) have been introduced in our previous works [HapkaM.J. Chem. Theory Comput.2019, 15, 1016−102730525591; HapkaM.J. Chem. Theory Comput.2019, 15, 6712–672331670950]. SAPT(MC) is applied either with generalized valence bond perfect pairing (GVB) or with complete active space self-consistent field (CASSCF) treatment of the monomers. We discuss two model multireference systems: the H₂ ··· H₂ dimer in out-of-equilibrium geometries and interaction between the argon atom and excited state of ethylene. Using the C₂H₄* ··· Ar complex as an example, we examine second-order terms arising from negative transitions in the linear response function of an excited monomer. We demonstrate that the negative-transition terms must be accounted for to ensure qualitative prediction of induction and dispersion energies and develop a procedure allowing for their computation. Factors limiting the accuracy of SAPT(MC) are discussed in comparison with other second-order SAPT schemes on a data set of small single-reference dimers.

Assessment of Performance of Density Functionals for Predicting Potential Energy Curves in Hydrogen Storage Applications

The availability of accurate computational tools for modeling and simulation is vital to accelerate the discovery of materials capable of storing hydrogen (H₂) under given parameters of pressure swing and temperature. Previously, we compiled the H2Bind275 data set consisting of equilibrium geometries and assessed the performance of 55 density functionals over this data set (Veccham, S. P.; Head-Gordon, M. J. Chem. Theory Comput. 2020, 16, 4963-4982). As it is crucial for computational tools to accurately model the entire potential energy curve (PEC), in addition to the equilibrium geometry, we extended this data set with 389 new data points to include two compressed and three elongated geometries along 78 PECs for H₂ binding, forming the H2Bind78 × 7 data set. By assessing the performance of 55 density functionals on this significantly larger and more comprehensive H2Bind78 × 7 data set, we identified the best performing density functionals for H₂ binding applications: PBE0-DH, ωB97X-V, ωB97M-V, and DSD-PBEPBE-D3(BJ). The addition of Hartree-Fock exchange improves the performance of density functionals, albeit not uniformly throughout the PEC. We recommend the usage of ωB97X-V and ωB97M-V density functionals as they offer good performance for both geometries and energies. In addition, we also identified B97M-V and B97M-rV as the best semilocal density functionals for predicting H₂ binding energy at its equilibrium geometry.

Dataset of noncovalent intermolecular interaction energy curves for 24 small high-spin open-shell dimers

We introduce a dataset of 24 interaction energy curves of open-shell noncovalent dimers, referred to as the O24 × 5 dataset. The dataset consists of high-spin dimers up to 11 atoms selected to assure diversity with respect to interaction types: dispersion, electrostatics, and induction. The benchmark interaction energies are obtained at the restricted open-shell CCSD(T) level of theory with complete basis set extrapolation (from aug-cc-pVQZ to aug-cc-pV5Z). We have analyzed the performance of selected wave function methods MP2, CCSD, and CCSD(T) as well as the F12a and F12b variants of coupled-cluster theory. In addition, we have tested dispersion-corrected density functional theory methods based on the PBE exchange-correlation model. The O24 × 5 dataset is a challenge to approximate methods due to the wide range of interaction energy strengths it spans. For the dispersion-dominated and mixed-type subsets, any tested method that does not include the triples contribution yields errors on the order of tens of percent. The electrostatic subset is less demanding with errors that are typically an order of magnitude smaller than the mixed and dispersion-dominated subsets.

Extension of an Atom-Atom Dispersion Function to Halogen Bonds and Its Use for Rational Design of Drugs and Biocatalysts

A dispersion function Das in the form of a damped atom-atom asymptotic expansion fitted to ab initio dispersion energies from symmetry-adapted perturbation theory was improved and extended to systems containing heavier halogen atoms. To illustrate its performance, the revised Das function was implemented in the multipole first-order electrostatic and second-order dispersion (MED) scoring model. The extension has allowed applications to a much larger set of biocomplexes than it was possible with the original Das. A reasonable correlation between MED and experimentally determined inhibitory activities was achieved in a number of test cases, including structures featuring nonphysically shortened intermonomer distances, which constitute a particular challenge for binding strength predictions. Since the MED model is also computationally efficient, it can be used for reliable and rapid assessment of the ligand affinity or multidimensional scanning of amino acid side-chain conformations in the process of rational design of novel drugs or biocatalysts.

r2SCAN-3c: A "Swiss army knife" composite electronic-structure method

The recently proposed r²SCAN meta-generalized-gradient approximation (mGGA) of Furness and co-workers is used to construct an efficient composite electronic-structure method termed r²SCAN-3c. To this end, the unaltered r²SCAN functional is combined with a tailor-made triple-ζ Gaussian atomic orbital basis set as well as with refitted D4 and geometrical counter-poise corrections for London-dispersion and basis set superposition error. The performance of the new method is evaluated for the GMTKN55 database covering large parts of chemical space with about 1500 data points, as well as additional benchmarks for non-covalent interactions, organometallic reactions, and lattice energies of organic molecules and ices, as well as for the adsorption on polar salt and non-polar coinage-metal surfaces. These comprehensive tests reveal a spectacular performance and robustness of r²SCAN-3c: It by far surpasses its predecessor B97-3c at only twice the cost and provides one of the best results of all semi-local density-functional theory (DFT)/QZ methods ever tested for the GMTKN55 database at one-tenth of the cost. Specifically, for reaction and conformational energies as well as non-covalent interactions, it outperforms prominent hybrid-DFT/QZ approaches at two to three orders of magnitude lower cost. Perhaps, the most relevant remaining issue of r²SCAN-3c is self-interaction error (SIE), owing to its mGGA nature. However, SIE is slightly reduced compared to other (m)GGAs, as is demonstrated in two examples. After all, this remarkably efficient and robust method is chosen as our new group default, replacing previous composite DFT and partially even expensive high-level methods in most standard applications for systems with up to several hundreds of atoms.

Random-Phase Approximation in Many-Body Noncovalent Systems: Methane in a Dodecahedral Water Cage

The many-body expansion (MBE) of energies of molecular clusters or solids offers a way to detect and analyze errors of theoretical methods that could go unnoticed if only the total energy of the system was considered. In this regard, the interaction between the methane molecule and its enclosing dodecahedral water cage, CH₄···(H₂O)₂₀, is a stringent test for approximate methods, including density functional theory (DFT) approximations. Hybrid and semilocal DFT approximations behave erratically for this system, with three- and four-body nonadditive terms having neither the correct sign nor magnitude. Here, we analyze to what extent these qualitative errors in different MBE contributions are conveyed to post-Kohn-Sham random-phase approximation (RPA), which uses approximate Kohn-Sham orbitals as its input. The results reveal a correlation between the quality of the DFT input states and the RPA results. Moreover, the renormalized singles energy (RSE) corrections play a crucial role in all orders of the many-body expansion. For dimers, RSE corrects the RPA underbinding for every tested Kohn-Sham model: generalized-gradient approximation (GGA), meta-GGA, (meta-)GGA hybrids, as well as the optimized effective potential at the correlated level. Remarkably, the inclusion of singles in RPA can also correct the wrong signs of three- and four-body nonadditive energies as well as mitigate the excessive higher-order contributions to the many-body expansion. The RPA errors are dominated by the contributions of compact clusters. As a workable method for large systems, we propose to replace those compact contributions with CCSD(T) energies and to sum up the remaining many-body contributions up to infinity with supermolecular or periodic RPA. As a demonstration of this approach, we show that for RPA(PBE0)+RSE it suffices to apply CCSD(T) to dimers and 30 compact, hydrogen-bonded trimers to get the methane-water cage interaction energy to within 1.6% of the reference value.

Assessing the Applicability of the Geometric Counterpoise Correction in B2PLYP/Double-ζ Calculations for Thermochemistry, Kinetics, and Noncovalent Interactions

We present a proof-of-concept study of the suitability of Kruse and Grimme’s geometric counterpoise correction (gCP) for basis set superposition errors (BSSEs) in double-hybrid density functional calculations with a double-ζ basis set. The gCP approach only requires geometrical information as an input and no orbital/density information is needed. Therefore, this correction is practically free of any additional cost. gCP is trained against the Boys and Bernardi counterpoise correction across a set of 528 noncovalently bound dimers. We investigate the suitability of the approach for the B2PLYP/def2-SVP level of theory, and reveal error compensation effects—missing London dispersion and the BSSE—associated with B2PLYP/def2-SVP calculations, and present B2PLYP-gCP-D3(BJ)/def2-SVP with the reparametrised DFT-D3(BJ) and gCP corrections as a more balanced alternative. Benchmarking results on the S66x8 benchmark set for noncovalent interactions and the GMTKN55 database for main-group thermochemistry, kinetics, and noncovalent interactions show a statistical improvement of the B2PLYP-gCP-D3(BJ) scheme over plain B2PLYP and B2PLYP-D3(BJ). B2PLYP-D3(BJ) shows significant overestimation of interaction energies, barrier heights with larger deviations from the reference values, and wrong relative stabilities in conformers, all of which can be associated with BSSE. We find that the gCP-corrected method represents a significant improvement over B2PLYP-D3(BJ), particularly for intramolecular noncovalent interactions. These findings encourage future developments of efficient double-hybrid DFT strategies that can be applied when double-hybrid calculations with large basis sets are not feasible due to system size.

Computational Investigations of Dispersion Interactions between Small Molecules and Graphene-like Flakes

We investigate dispersion interactions in a selection of atomic, molecular, and molecule-surface systems, comparing high-level correlated methods with empirically corrected density functional theory (DFT). We assess the efficacy of functionals commonly used for surface-based calculations, with and without the D3 correction of Grimme. We find that the inclusion of the correction is essential to get meaningful results, but there is otherwise little to distinguish between the functionals. We also present coupled-cluster quality interaction curves for H₂, NO₂, H₂O, and Ar interacting with large carbon flakes, acting as models for graphene surfaces, using novel absolutely localized molecular orbital based methods. These calculations demonstrate that the problems with empirically corrected DFT when investigating dispersion appear to compound as the system size increases, with important implications for future computational studies of molecule-surface interactions.

Screening nature of the van der Waals density functional method: a review and analysis of the many-body physics foundation

We review the screening nature and many-body physics foundation of the van der Waals density functional (vdW-DF) method [Berland Ket al2015Rep. Prog. Phys.78066501], a systematic approach to construct truly nonlocal exchange-correlation energy density functionals. To that end we define and focus on a class of consistent vdW-DF versions that adhere to the Lindhard screening logic of the full method formulation. The consistent-exchange vdW-DF-cx version [Berland K and Hyldgaard P 2014Phys. Rev. B89035412] and its spin extension [Thonhauser Tet al2015Phys. Rev. Lett.115136402] represent the first examples of this class; in general, consistent vdW-DFs reflect a concerted expansion of a formal recast of the adiabatic-connection formula [Hyldgaard Pet al2014Phys. Rev. B90075148], an exponential summation of contributions to the local-field response, and the Dyson equation. We argue that the screening emphasis is essential because the exchange-correlation energy reflects an effective electrodynamics set by a long-range interaction. Two consequences are that (1) there are, in principle, no wiggle room in how one balances exchange and correlation, for example, in vdW-DF-cx, and that (2) consistent vdW-DFs have a formal structure that allows them to incorporate vertex-correction effects, at least in the case of levels that experience recoil-less interactions (for example, near the Fermi surface). We explore the extent to which the strictly nonempirical vdW-DF-cx formulation can serve as a systematic extension of the constraint-based semilocal functionals. For validation, we provide a complete survey of vdW-DF-cx performance for broad molecular processes, for the full set of 55 benchmarks in GMTKN55 [Goerigk Let al2017Phys. Chem. Chem. Phys.1932184] and comparing to the quantum-chemistry calculations that are summarized in that paper. We also provide new vdW-DF-cx results for metal surface energies and work functions that we compare to experiment. Finally, we use the screening insight to separate the vdW-DF nonlocal-correlation term into pure-vdW-interaction and local-field-susceptibility effects and present tools to compute and map the binding signatures.

SAPT codes for calculations of intermolecular interaction energies

Symmetry-adapted perturbation theory (SAPT) is a method for calculations of intermolecular (noncovalent) interaction energies. The set of SAPT codes that is described here, the current version named SAPT2020, includes virtually all variants of SAPT developed so far, among them two-body SAPT based on perturbative, coupled cluster, and density functional theory descriptions of monomers, three-body SAPT, and two-body SAPT for some classes of open-shell monomers. The properties of systems governed by noncovalent interactions can be predicted only if potential energy surfaces (force fields) are available. SAPT is the preferred approach for generating such surfaces since it is seamlessly connected to the asymptotic expansion of interaction energy. SAPT2020 includes codes for automatic development of such surfaces, enabling generation of complete dimer surfaces with a rigid monomer approximation for dimers containing about one hundred atoms. These codes can also be used to obtain surfaces including internal degrees of freedom of monomers.

Benchmark Experimental Gas-Phase Intermolecular Dissociation Energies by the SEP-R2PI Method

The gas-phase ground-state dissociation energy D0( S0) of an isolated and cold bimolecular complex is a fundamental measure of the intermolecular interaction strength between its constituents. Accurate D0 values are important for the understanding of intermolecular bonding, for benchmarking high-level theoretical calculations, and for the parameterization of dispersion-corrected density functionals or force-field models that are used in fields ranging from crystallography to biochemistry. We review experimental measurements of the gas-phase D0( S0) and D0( S1) values of 55 different M⋅S complexes, where M is a (hetero)aromatic molecule and S is a closed-shell solvent atom or molecule. The experiments employ the triply resonant SEP-R2PI laser method, which involves M-centered ( S0 → S1) electronic excitation, followed by S1 → S0 stimulated emission spanning a range of S0 state vibrational levels. At sufficiently high vibrational energy, vibrational predissociation of the M⋅S complex occurs. A total of 49 dissociation energies were bracketed to within ≤1.0 kJ/mol, providing a large experimental database of accurate noncovalent interactions.

Prediction of aqueous free energies of solvation using coupled QM and MM explicit solvent simulations

A method based on molecular dynamics simulations which employ two distinct levels of theory is proposed and tested for the prediction of Gibbs free energies of solvation for non-ionic solutes in water. The method consists of two additive contributions: (i) an evaluation of the free energy of solvation predicted by a computationally efficient molecular mechanics (MM) method; and (ii) an evaluation of the free energy difference between the potential energy surface of the MM method and that of a more computationally intensive first-principles quantum-mechanical (QM) method. The latter is computed by a thermodynamic integration method based on a series of shorter molecular dynamics simulations that employ weighted averages of the QM and MM force evaluations. The combined computational approach is tested against the experimental free energies of aqueous solvation for four solutes. For solute-solvent interactions that are found to be described qualitatively well by the MM method, the QM correction makes a modest improvement in the predicted free energy of aqueous solvation. However, for solutes that are found to not be adequately described by the MM method, the QM correction does not improve agreement with experiment. These preliminary results provide valuable insights into the novel concept of implementing thermodynamic integration between two model chemistries, suggesting that it is possible to use QM methods to improve upon the MM predictions of free energies of aqueous solvation.

Automatic Generation of Flexible-Monomer Intermolecular Potential Energy Surfaces

A method is developed for automatic generation of nonreactive intermolecular two-body potential energy surfaces (PESs) including intramonomer degrees of freedom. This method, called flex-autoPES, is an extension of the autoPES method developed earlier, which assumes rigid monomers. In both cases, the whole PES development proceeds without any human intervention. The functional form used is a sum of products of site-site functions (both atomic and off-atomic sites can be used). The leading terms with sites involving different monomers are of physically motivated form. The long-range part of a PES is computed from monomer properties without using any dimer information. The close-range part is fitted to dimer interaction energies computed using electronic structure methods. Virtually any method can be used in such calculations, but the use of symmetry-adapted perturbation theory provides a seamless connection to the long-range part of the PES. The performance of the flex-autoPES code was tested by developing a full-dimensional PES for the water dimer and PESs including only some soft intramonomer degrees of freedom for the ethylene glycol dimer and for the ethylene glycol-water dimer. In the case of the water dimer, the root-mean-square error (RMSE) of the PES from the data points with negative total energies is 0.03 kcal/mol, and we expect this PES to be more accurate than any previously published PES of this type. For the ethylene glycol dimer and the ethylene glycol-water dimers, the analogous RMSEs are 0.25 and 0.1 kcal/mol, respectively.

Ab Initio Extended Hartree-Fock plus Dispersion Method Applied to Dimers with Hundreds of Atoms

The Hartree-Fock plus dispersion plus first-order correlation (HFDc⁽¹⁾) method consists in augmenting the HF interaction energy by the correlation part of the first-order interaction energy and the second-order dispersion and exchange-dispersion energies. All of the augmentation terms are computed using the symmetry-adapted perturbation theory based on density functional theory description of monomers [SAPT(DFT)]; thus, HFDc⁽¹⁾ is a fully ab initio method. A partly empirical version of this method, HFD_asc⁽¹⁾, uses a damped asymptotic expansion for the dispersion plus exchange-dispersion term fitted to SAPT(DFT) ab initio values. The HFDc⁽¹⁾ interaction energies for dimers in the S22, S66, S66x8, NCCE31, IonHB, and UD-ARL benchmark data sets are more accurate than those given by most ab initio methods with comparable costs. HFDc⁽¹⁾ can be used routinely for dimers with nearly 200 atoms, such as included in the S12L benchmark set, giving results comparable to those obtained by the most expensive methods applicable.

Theoretical investigation of the ORR on boron-silicon nanotubes (B-SiNTs) as acceptable catalysts in fuel cells

Here, the potential of boron doped silicon nanotubes (7, 0) as ORR catalysts is examined. Acceptable paths for the ORR on studied catalysts are examined through DFT. The optimum mechanism of the ORR on the surface of B2-SiNT (7, 0) is shown. The ORR on the surface of B2-SiNTs (7, 0) can continue through LH and ER mechanisms. The calculated beginning voltage for the ORR on B2-SiNTs (7, 0) is 0.37 V and it is smaller than the beginning voltage (0.45 V) for platinum-based catalysts. In the acidic solution the beginning voltage for the oxygen reduction process can be evaluated to be 0.97 V, which corresponds to 0.37 V as a minimum overvoltage for the ORR. The B2-SiNTs (7, 0) are suggested as an ORR catalyst in acidic environments.

Soft experimental constraints for soft interactions: a spectroscopic benchmark data set for weak and strong hydrogen bonds

An experimental benchmark data base on rotational constants, vibrational properties and energy differences for weakly and more strongly hydrogen-bonded complexes and their constituents from the spectroscopic literature is assembled. It is characterized in detail and finally contracted to a more compact, discriminatory set (ENCH-51, for Experimental Non-Covalent Harmonic with 51 entries). The meeting points between theory and experiment consist of equilibrium rotational constants and harmonic frequencies and energies, which are back-corrected from experimental observables and are very easily accessible by quantum chemical calculations. The relative performance of B3LYP-D3, PBE0-D3 and M06-2X density functional theory predictions with a quadruple-zeta basis set is used to illustrate systematic errors, error compensation and selective performance for structural, vibrational and energetical observables. The current focus is on perspectives and different benchmarking methodologies, rather than on a specific theoretical method or a specific class of compounds. Extension of the data base in chemical, observable and quantum chemical method space is encouraged.

Range-separated double-hybrid density-functional theory with coupled-cluster and random-phase approximations

We construct range-separated double-hybrid (RSDH) schemes which combine coupled-cluster or random-phase approximations (RPAs) with a density functional based on a two-parameter Coulomb-attenuating-method-like decomposition of the electron-electron interaction. We find that the addition of a fraction of short-range electron-electron interaction in the wave-function part of the calculation is globally beneficial for the RSDH scheme involving a variant of the RPA with exchange terms. Even though the latter scheme is globally as accurate as the corresponding scheme employing only second-order Møller-Plesset perturbation theory for atomization energies, reaction barrier heights, and weak intermolecular interactions of small molecules, it is more accurate for the more complicated case of the benzene dimer in the stacked configuration. The present RSDH scheme employing a RPA thus represents a new member in the family of double hybrids with minimal empiricism which could be useful for general chemical applications.