Tomography and imaging at the PSICHE beam line of the SOLEIL synchrotron

Greater Resistance to Drought-Induced Embolism Is Linked to Higher Yield Maintenance in Soybean

With increasing drought events worldwide, crop breeding must focus on drought resistance to maintain crop yields. To ensure a high level of gas exchange and growth, plants need to maintain the integrity of their vascular system under drought conditions. While the impact of drought-induced vascular damage on tree species is well-documented, its effect on the yield of annual crops like soybean (Glycine max (L.) Merrill) remains unknown. We investigated xylem vulnerability to embolism of ten soybean cultivars with contrasting phylogenetic origins and phenology using the optical technique. With X-ray micro-tomography, we assessed xylem vulnerability across the plant vascular pathway to quantify the vulnerability segmentation. Our results revealed that soybean is moderately vulnerable to xylem embolism (mean leaf P50 = -1.85 MPa), with a significant Intraspecific variability with a difference of 1 MPa between the most extreme cultivars. Cultivars with higher leaf embolism resistance maintained higher yields in the field, particularly during dry years, highlighting the critical role of xylem hydraulic failure during drought in crop yield. This study provides new insights into the importance of hydraulic traits underlying drought tolerance in soybeans and their incorporation into breeding programmes for embolism resistance to improve yield resilience.

Optimising 4D imaging of fast-oscillating structures using X-ray microtomography with retrospective gating

Imaging the internal architecture of fast-vibrating structures at micrometer scale and kilohertz frequencies poses great challenges for numerous applications, including the study of biological oscillators, mechanical testing of materials, and process engineering. Over the past decade, X-ray microtomography with retrospective gating has shown very promising advances in meeting these challenges. However, breakthroughs are still expected in acquisition and reconstruction procedures to keep improving the spatiotemporal resolution, and study the mechanics of fast-vibrating multiscale structures. Thereby, this works aims to improve this imaging technique by minimising streaking and motion blur artefacts through the optimisation of experimental parameters. For that purpose, we have coupled a numerical approach relying on tomography simulation with vibrating particles with known and ideal 3D geometry (micro-spheres or fibres) with experimental campaigns. These were carried out on soft composites, imaged in synchrotron X-ray beamlines while oscillating up to 400 Hz, thanks to a custom-developed vibromechanical device. This approach yields homogeneous angular sampling of projections and gives reliable predictions of image quality degradation due to motion blur. By overcoming several technical and scientific barriers limiting the feasibility and reproducibility of such investigations, we provide guidelines to enhance gated-CT 4D imaging for the analysis of heterogeneous, high-frequency oscillating materials.

Anthropogenic modification of a giant ground sloth tooth from Brazil supported by a multi-disciplinary approach

Identifying evidence of human modification of extinct animal remains, such as Pleistocene megafauna, is challenging due to the similarity of anthropogenic and non-anthropogenic taphonomic features observed under optical microscopy. Here, we re-investigate a Late Pleistocene ground sloth tooth from northeast Brazil, previously suggested as human-modified based only on optical observation. To characterize the macro- and micro-morphological characteristics of the marks preserved in this tooth and evaluate potential human modification, we used stereomicroscope and scanning electron microscopy (SEM) supplemented by energy dispersive spectroscopy (EDS), UV photoluminescence (UV/PL), synchrotron-based X-ray fluorescence (SR-XRF), and synchrotron micro-computed tomography (SR-µCT). These methods allowed us to discriminate non-anthropogenic taphonomic features (root and sedimentary damage), anthropogenic marks, and histological features. The latter shows the infiltration of exogenous elements into the dentine from the sediments. Our evidence demonstrates the sequence of anthropogenic and non-anthropogenic taphonomic modification of this tooth and supports its initial intentional modification by humans. We highlight the benefits of emerging imaging and spectral imaging techniques to investigate and diagnose human modification in fossil and archaeological records and propose that human modification of tooth tissues should be further considered when studying possibly anthropogenically altered fossil remains.

Understanding the hot isostatic pressing effectiveness of laser powder bed fusion Ti-6Al-4V by in-situ X-ray imaging and diffraction experiments

In the present study, in-situ observation of Hot Isostatic Pressure (HIP) procedure of laser powder bed fusion manufactured Ti-6Al-4V parts was performed to quantitatively estimate the densification rate of the material and the influence of the defect initial size and shape on such rate. The observations were performed in-situ using the Ultrafast Tomography Paris-Edinburgh Cell and the combination of fast phase-contrast synchrotron X-ray tomography and energy dispersive diffraction. With this strategy, we could quantify how the effectiveness of HIP depends on the characteristics of a defect. Smaller defects showed a higher densification rate, while the defect shape did not have significant effect on such rate.

Deformation of two-phase aggregates with in situ X-ray tomography in rotating Paris-Edinburgh cell at GPa pressures and high temperature

High-pressure (>1 GPa) torsion apparatus can be coupled with in situ X-ray tomography (XRT) to study microstructures in materials associated with large shear strains. Here, deformation experiments were carried out on multi-phase aggregates at ∼3-5 GPa and ∼300-500°C, using a rotational tomography Paris-Edinburgh press (RoToPEc) with in situ absorption contrast XRT on the PSICHE beamline at Synchrotron SOLEIL. The actual shear strain reached in the samples was quantified with respect to the anvil twisting angles, which is γ ≤ 1 at 90° anvil twist and reaches γ ≃ 5 at 225° anvil twist. 2D and 3D quantifications based on XRT that can be used to study in situ the deformation microfabrics of two-phase aggregates at high shear strain are explored. The current limitations for investigation in real time of deformation microstructures using coupled synchrotron XRT with the RoToPEc are outlined.

Photosynthesis, leaf hydraulic conductance and embolism dynamics in the resurrection plant Barbacenia purpurea

The main parameters determining photosynthesis are stomatal and mesophyll conductance and electron transport rate, and for hydraulic dynamics they are leaf hydraulic conductance and the spread of embolism. These parameters have scarcely been studied in desiccation-tolerant (resurrection) plants exposed to drought. Here, we characterized photosynthesis and hydraulics during desiccation and rehydration in a poikilochlorophyllous resurrection plant, Barbacenia purpurea (Velloziaceae). Gas exchange, chlorophyll fluorescence, and leaf water status were monitored along the whole dehydration-rehydration cycle. Simultaneously, embolism formation and hydraulic functioning recovery were measured at leaf level using micro-computed tomography imaging. Photosynthesis and leaf hydraulic conductance ceased at relatively high water potential (-1.28 and -1.54 MPa, respectively), whereas the onset of leaf embolism occurred after stomatal closure and photosynthesis cessation (<-1.61 MPa). This sequence of physiological processes during water stress may be associated with the need to delay dehydration, to prepare the molecular changes required in the desiccated state. Complete rehydration occurred rapidly in the mesophyll, whereas partial xylem refilling, and subsequent recovery of photosynthesis, occurred at later stages after rewatering. These results highlight the importance of stomata as safety valves to protect the vascular system from embolism, even in a plant able to fully recover after complete embolism.

Characterization of Pharmaceutical Tablets by X-ray Tomography

Solid dosage forms such as tablets are extensively used in drug administration for their simplicity and large-scale manufacturing capabilities. High-resolution X-ray tomography is one of the most valuable non-destructive techniques to investigate the internal structure of the tablets for drug product development as well as for a cost effective production process. In this work, we review the recent developments in high-resolution X-ray microtomography and its application towards different tablet characterizations. The increased availability of powerful laboratory instrumentation, as well as the advent of high brilliance and coherent 3rd generation synchrotron light sources, combined with advanced data processing techniques, are driving the application of X-ray microtomography forward as an indispensable tool in the pharmaceutical industry.

Synchrotron Based X-ray Microtomography Reveals Cellular Morphological Features of Developing Wheat Grain

Wheat is one of the most important crops in the world, mainly used for human consumption and animal feed. To overcome the increasing demand in wheat production, it is necessary to better understand the mechanisms involved in the growth of the wheat grain. X-ray computed tomography is an efficient method for the non-destructive investigation of the 3D architecture of biological specimens, which does not require staining, sectioning, or inclusion. In particular, phase-contrast tomography results in images with better contrast and an increased resolution compared to that obtained with laboratory tomography devices. The aim of this study was to investigate the potential of phase-contrast tomography for the study of the anatomy of the wheat grain at early stages of development. We provided 3D images of entire grains at various development stages. The image analysis allowed identifying a large number of tissues, and to visualize individual cells. Using a high-resolution setup, finer details were obtained, making it possible to identify additional tissues. Three-dimensional rendering of the grain also revealed the pattern resulting from the epidermis cells. X-ray phase-contrast tomography appears as a promising imaging method for the study of the 3D anatomy of plant organs and tissues.

In situ tomographic study of a 3D-woven SiC/SiC composite part subjected to severe thermo-mechanical loads

A high-temperature multi-axial test is carried out to characterize the thermo-mechanical behaviour of a 3D-woven SiC/SiC composite aeronautical part under loads representative of operating conditions. The sample is L-shaped and cut out from the part. It is subjected to severe thermal gradients and a superimposed mechanical load that progressively increases up to the first damage. The sample shape and its associated microstructure, the heterogeneity of the stress field and the limited accessibility to regions susceptible to damage require non-contact imaging modalities. An in situ experiment, conducted with a dedicated testing machine at the SOLEIL synchrotron facility, provides the sample microstructure from computed micro-tomographic imaging and thermal loads from infrared thermography. Experimental constraints lead to non-ideal acquisition conditions for both measurement modalities. This article details the procedure of correcting artefacts to use the volumes for quantitative exploitation (i.e. full-field measurement, model validation and identification). After proper processing, despite its complexity, the in situ experiment provides high-quality data about a part under realistic operating conditions. The influence of the mesostructure on fracture phenomena can be inferred from the tomography in the damaged state. Experiments show that the localization of damage initiation is driven by the geometry, while the woven structure moderates the crack propagation. This study widens the scope of in situ thermo-mechanical experiments to more complex loading states, closer to in-service conditions.

Extreme conditions research using the large-volume press at the P61B endstation, PETRA III

Penetrating, high-energy synchrotron X-rays are in strong demand, particularly for high-pressure research in physics, chemistry and geosciences, and for materials engineering research under less extreme conditions. A new high-energy wiggler beamline P61 has been constructed to meet this need at PETRA III in Hamburg, Germany. The first part of the paper offers an overview of the beamline front-end components and beam characteristics. The second part describes the performance of the instrumentation and the latest developments at the P61B endstation. Particular attention is given to the unprecedented high-energy photon flux delivered by the ten wigglers of the PETRA III storage ring and the challenges faced in harnessing this amount of flux and heat load in the beam. Furthermore, the distinctiveness of the world's first six-ram Hall-type large-volume press, Aster-15, at a synchrotron facility is described for research with synchrotron X-rays. Additionally, detection schemes, experimental strategies and preliminary data acquired using energy-dispersive X-ray diffraction and radiography techniques are presented.

Non-Targeted Effects of Synchrotron Radiation: Lessons from Experiments at the Australian and European Synchrotrons

Studies have been conducted at synchrotron facilities in Europe and Australia to explore a variety of applications of synchrotron X-rays in medicine and biology. We discuss the major technical aspects of the synchrotron irradiation setups, paying specific attention to the Australian Synchrotron (AS) and the European Synchrotron Radiation Facility (ESRF) as those best configured for a wide range of biomedical research involving animals and future cancer patients. Due to ultra-high dose rates, treatment doses can be delivered within milliseconds, abiding by FLASH radiotherapy principles. In addition, a homogeneous radiation field can be spatially fractionated into a geometric pattern called microbeam radiotherapy (MRT); a coplanar array of thin beams of microscopic dimensions. Both are clinically promising radiotherapy modalities because they trigger a cascade of biological effects that improve tumor control, while increasing normal tissue tolerance compared to conventional radiation. Synchrotrons can deliver high doses to a very small volume with low beam divergence, thus facilitating the study of non-targeted effects of these novel radiation modalities in both in-vitro and in-vivo models. Non-targeted radiation effects studied at the AS and ESRF include monitoring cell–cell communication after partial irradiation of a cell population (radiation-induced bystander effect, RIBE), the response of tissues outside the irradiated field (radiation-induced abscopal effect, RIAE), and the influence of irradiated animals on non-irradiated ones in close proximity (inter-animal RIBE). Here we provide a summary of these experiments and perspectives on their implications for non-targeted effects in biomedical fields.

Combined angular and energy dispersive diffraction: optimized data acquisition, normalization and reduction

Combined angular and energy dispersive diffraction is particularly well suited to experiments at high pressures in large-volume presses, and to the study of liquid or amorphous systems. This work describes the data acquisition, correction and reduction approach developed at the PSICHE beamline of the SOLEIL synchrotron. The measured data were normalized for both the scattering volume and the effective incident energy spectrum. By optimizing the acquisition strategy, the measurement time and radiation dose are greatly reduced. The correction and reduction protocol outputs normalized scattering profiles that are suitable for pair distribution function or liquid structure analysis. These processes are demostrated with examples from a number of real experimental data sets.

Beamline K11 DIAD: a new instrument for dual imaging and diffraction at Diamond Light Source

The Dual Imaging and Diffraction (DIAD) beamline at Diamond Light Source is a new dual-beam instrument for full-field imaging/tomography and powder diffraction. This instrument provides the user community with the capability to dynamically image 2D and 3D complex structures and perform phase identification and/or strain mapping using micro-diffraction. The aim is to enable in situ and in operando experiments that require spatially correlated results from both techniques, by providing measurements from the same specimen location quasi-simultaneously. Using an unusual optical layout, DIAD has two independent beams originating from one source that operate in the medium energy range (7-38 keV) and are combined at one sample position. Here, either radiography or tomography can be performed using monochromatic or pink beam, with a 1.4 mm × 1.2 mm field of view and a feature resolution of 1.2 µm. Micro-diffraction is possible with a variable beam size between 13 µm × 4 µm and 50 µm × 50 µm. One key functionality of the beamline is image-guided diffraction, a setup in which the micro-diffraction beam can be scanned over the complete area of the imaging field-of-view. This moving beam setup enables the collection of location-specific information about the phase composition and/or strains at any given position within the image/tomography field of view. The dual beam design allows fast switching between imaging and diffraction mode without the need of complicated and time-consuming mode switches. Real-time selection of areas of interest for diffraction measurements as well as the simultaneous collection of both imaging and diffraction data of (irreversible) in situ and in operando experiments are possible.

A new high-pressure technique for the measurement of low frequency seismic attenuation using cyclic torsional loading

We report a new technique for torsional testing of materials under giga-pascal pressures, which uses a shearing module in a large-volume Paris-Edinburgh press in combination with high-resolution fast radiographic x-ray imaging. The measurement of the relative amplitude and phase lag between the cyclic displacement in the sample and a standard material (Al₂O₃) provides the effective shear modulus and attenuation factor for the sample. The system can operate in the 0.001-0.01 Hz frequency range and up to 5 GPa and 2000 K although high-temperature measurements may be affected by grain growth and plastic strain. Preliminary experimental results on San Carlos olivine are in quantitative agreement with previously reported Q^-1 factors at lower pressure. This cyclic torsional loading method opens new directions to quantify the viscoelastic properties of minerals/rocks at seismic frequencies and under pressure-temperature conditions relevant to the Earth's mantle for a better interpretation of seismological data.

Seasonal and long-term consequences of esca grapevine disease on stem xylem integrity

Hydraulic failure has been extensively studied during drought-induced plant dieback, but its role in plant-pathogen interactions is under debate. During esca, a grapevine (Vitis vinifera) disease, symptomatic leaves are prone to irreversible hydraulic dysfunctions but little is known about the hydraulic integrity of perennial organs over the short- and long-term. We investigated the effects of esca on stem hydraulic integrity in naturally infected plants within a single season and across season(s). We coupled direct (ks) and indirect (kth) hydraulic conductivity measurements, and tylose and vascular pathogen detection with in vivo X-ray microtomography visualizations. Xylem occlusions (tyloses) and subsequent loss of stem hydraulic conductivity (ks) occurred in all shoots with severe symptoms (apoplexy) and in more than 60% of shoots with moderate symptoms (tiger-stripe), with no tyloses in asymptomatic shoots. In vivo stem observations demonstrated that tyloses occurred only when leaf symptoms appeared, and resulted in more than 50% loss of hydraulic conductance in 40% of symptomatic stems, unrelated to symptom age. The impact of esca on xylem integrity was only seasonal, with no long-term impact of disease history. Our study demonstrated how and to what extent a vascular disease such as esca, affecting xylem integrity, could amplify plant mortality through hydraulic failure.

Drought-induced lacuna formation in the stem causes hydraulic conductance to decline before xylem embolism in Selaginella

Lycophytes are the earliest diverging extant lineage of vascular plants, sister to all other vascular plants. Given that most species are adapted to ever-wet environments, it has been hypothesized that lycophytes, and by extension the common ancestor of all vascular plants, have few adaptations to drought. We investigated the responses to drought of key fitness-related traits such as stomatal regulation, shoot hydraulic conductance (K_shoot ) and stem xylem embolism resistance in Selaginella haematodes and S. pulcherrima, both native to tropical understory. During drought stomata in both species were found to close before declines in K_shoot , with a 50% loss of K_shoot occurring at -1.7 and -2.5 MPa in S. haematodes and S. pulcherrima, respectively. Direct observational methods revealed that the xylem of both species was resistant to embolism formation, with 50% of embolized xylem area occurring at -3.0 and -4.6 MPa in S. haematodes and S. pulcherrima, respectively. X-ray microcomputed tomography images of stems revealed that the decline in K_shoot occurred with the formation of an air-filled lacuna, disconnecting the central vascular cylinder from the cortex. We propose that embolism-resistant xylem and large capacitance, provided by collapsing inner cortical cells, is essential for Selaginella survival during water deficit.

Advanced vascular function discovered in a widespread moss

The evolution of terrestrial plants capable of growing upwards into the dry atmosphere profoundly transformed the Earth. A transition from small, 'non-vascular' bryophytes to arborescent vascular plants during the Devonian period is partially attributed to the evolutionary innovation of an internal vascular system capable of functioning under the substantial water tension associated with vascular water transport. Here, we show that vascular function in one of the most widespread living bryophytes (Polytrichum commune) exhibits strong functional parallels with the vascular systems of higher plants. These parallels include vascular conduits in Polytrichum that resist buckling while transporting water under tension, and leaves capable of regulating transpiration, permitting photosynthetic gas exchange without cavitation inside the vascular system. The advanced vascular function discovered in this tallest bryophyte family contrasts with the highly inefficient water use found in their leaves, emphasizing the importance of stomatal evolution enabling photosynthesis far above the soil surface.

Over-accumulation of abscisic acid in transgenic tomato plants increases the risk of hydraulic failure

Climate change threatens food security, and plant science researchers have investigated methods of sustaining crop yield under drought. One approach has been to overproduce abscisic acid (ABA) to enhance water use efficiency. However, the concomitant effects of ABA overproduction on plant vascular system functioning are critical as it influences vulnerability to xylem hydraulic failure. We investigated these effects by comparing physiological and hydraulic responses to water deficit between a tomato (Solanum lycopersicum) wild type control (WT) and a transgenic line overproducing ABA (sp12). Under well-watered conditions, the sp12 line displayed similar growth rate and greater water use efficiency by operating at lower maximum stomatal conductance. X-ray microtomography revealed that sp12 was significantly more vulnerable to xylem embolism, resulting in a reduced hydraulic safety margin. We also observed a significant ontogenic effect on vulnerability to xylem embolism for both WT and sp12. This study demonstrates that the greater water use efficiency in the tomato ABA overproducing line is associated with higher vulnerability of the vascular system to embolism and a higher risk of hydraulic failure. Integrating hydraulic traits into breeding programmes represents a critical step for effectively managing a crop's ability to maintain hydraulic conductivity and productivity under water deficit.

Non-destructive characterization of mechanically processed waste printed circuit boards - particle liberation analysis

This work aimed to develop and propose methods for evaluating the metal degree of liberation to characterize the metal deportment/concentration and liberation/association of mechanically processed waste Printed Circuit Boards (PCBs) that hold the complex and heterogeneity structure and metal distribution/association. Waste PCBs passed through a series of mechanical processing (i.e. comminution, sieving) for the metal recovery were characterized to understand and to evaluate the metal distribution and degree of liberation of the metals in order to optimize the comminution process, avoiding excessive fine particle production. The characterizations were performed at laboratory scale, as well as utilizing large scale experimental facilities, i.e. a portable X-Ray Fluorescence (XRF), micro-XRF and Synchrotron X-Ray Tomography. The proposed methods confirmed that metal liberation was very high in the fine size fraction (0.125-0.350 mm) while many locked particles were identified in the coarse size fraction (0.350-0.500 mm). Such results were analyzed and were discussed in order to better understand metal deportment/concentration behaviors. The advantages and disadvantages related to the different characterization approaches were identified and discussed in this paper, as well as their methodological developments in a waste PCBs' mechanical processing perspective.

Embolism resistance in petioles and leaflets of palms

BACKGROUND AND AIMS

Hydraulic studies are currently biased towards conifers and dicotyledonous angiosperms; responses of arborescent monocots to increasing temperature and drought remain poorly known. This study aims to assess xylem resistance to drought-induced embolism in palms.

METHODS

We quantified embolism resistance via P50 (xylem pressure inducing 50 % embolism or loss of hydraulic conductivity) in petioles and leaflets of six palm species differing in habitat and phylogenetic relatedness using three techniques: in vivo X-ray-based microcomputed tomography, the in situ flow centrifuge technique and the optical vulnerability method.

KEY RESULTS

Our results show that P50 of petioles varies greatly in the palm family, from -2.2 ± 0.4 MPa in Dypsis baronii to -5.8 ± 0.3 MPa in Rhapis excelsa (mean ± s.e.). No difference or weak differences were found between petioles and leaf blades within species. Surprisingly, where differences occurred, leaflets were less vulnerable to embolism than petioles. Embolism resistance was not correlated with conduit size (r = 0.37, P = 0.11).

CONCLUSIONS

This study represents the first estimate of drought-induced xylem embolism in palms across biomes and provides the first step towards understanding hydraulic adaptations in long-lived arborescent monocots. It showed an almost 3-fold range of embolism resistance between palm species, as large as that reported in all angiosperms. We found little evidence for hydraulic segmentation between leaflets and petioles in palms, suggesting that when it happens, hydraulic segregation may lack a clear relationship with organ cost or replaceability.

Micro-focused MHz pink beam for time-resolved X-ray emission spectroscopy

The full radiation from the first harmonic of a synchrotron undulator (between 5 and 12 keV) at the Advanced Photon Source is microfocused using a stack of beryllium compound refractive lenses onto a fast-moving liquid jet and overlapped with a high-repetition-rate optical laser. This micro-focused geometry is used to perform efficient nonresonant X-ray emission spectroscopy on transient species using a dispersive spectrometer geometry. The overall usable flux achieved on target is above 10¹⁵ photons s^-1 at 8 keV, enabling photoexcited systems in the liquid phase to be tracked with time resolutions from tens of picoseconds to microseconds, and using the full emission spectrum, including the weak valence-to-core signal that is sensitive to chemically relevant electronic properties.

Synchrotron-Based Phase Mapping in Corroded Metals: Insights from Early Copper-Base Artifacts

The detailed description of corrosion processes in ancient and historical metal artifacts currently relies on the in-depth study of prepared cross sections. The in-plane elemental and phase distributions can be established from a combination of light and electron microscopy characterization. Here, we show that high-resolution virtual sectioning through synchrotron X-ray microcomputed tomography allows a precise noninvasive 3D description of the distribution of both internal and external mineral phases in whole objects. In fragments of early copper artifacts (third-second millennium BC) from Southern Mesopotamia and the Indus valley, this approach provided essential clues on long-term corrosion processes. Major and minor phases were identified through semiquantitative evaluation of attenuation coefficients using polychromatic X-ray illumination. We found evidence for initially unidentified phases through statistical processing of images. We discuss interpretation of the distribution of these phases. A good correlation between the corrosion phases identified by CT and by invasive BSE-SEM is demonstrated. In addition to the stratigraphy of the copper corrosion compounds, we examine and discuss the variations observed in the attenuation coefficients of Cu(I) phases. Semiquantitative synchrotron X-ray microtomography phase mapping requires no specific sample preparation, in particular polishing or surface finishing, and any material tearing or displacement is avoided. We also provide evidence for the noninvasive observation of phases rapidly altered upon preparation of real cross sections. The method can be applied when cross-sectioning even of minute fragments is impossible.

Simultaneous X-ray radioscopy/tomography and energy-dispersive diffraction applied to liquid aluminium alloy foams

High-speed X-ray imaging in two dimensions (radioscopy) and three dimensions (tomography) is combined with fast X-ray diffraction in a new experimental setup at the synchrotron radiation source BESSY II. It allows for in situ studies of time-dependent phenomena in complex systems. As a first application, the foaming process of an aluminium alloy was studied in three different experiments. Radioscopy, optical expansion measurements and diffraction were used to correlate the change of foam morphology to the various phases formed during heating of an AlMg15Cu10 alloy to 620°C in the first experiment. Radioscopy was then replaced by tomography. Acquiring tomograms and diffraction data at 2 Hz allows even more details of foam evolution to be captured, for example, bubble size distribution. In a third experiment, 4 Hz tomography yields dynamic insights into fast phenomena in evolving metal foam.

High-speed tomography under extreme conditions at the PSICHE beamline of the SOLEIL Synchrotron

In situ microtomography at high pressure and temperature has developed rapidly in the last decade, driven by the development of new high-pressure apparatus. It is now routinely possible to characterize material under high pressure with acquisition times for tomograms of the order of tens of minutes. Here, advantage was taken of the possibility to combine the use of a pink beam projected through a standard Paris-Edinburgh press in order to demonstrate the possibility to perform high-speed synchrotron X-ray tomography at high pressure and temperature allowing complete high-resolution tomograms to be acquired in about 10 s. This gives direct visualization to rapidly evolving or unstable systems, such as flowing liquids or reacting components, and avoids assumptions in the interpretation of quenched samples. Using algebraic reconstruction techniques allows the missing angle artefacts that result from the columns of the press to be minimized.

Development of synchrotron X-ray micro-tomography under extreme conditions of pressure and temperature

X-ray tomography is a non-destructive three-dimensional imaging/microanalysis technique selective to a wide range of properties such as density, chemical composition, chemical states and crystallographic structure with extremely high sensitivity and spatial resolution. Here the development of in situ high-pressure high-temperature micro-tomography using a rotating module for the Paris-Edinburgh cell combined with synchrotron radiation is described. By rotating the sample chamber by 360°, the limited angular aperture of ordinary high-pressure cells is surmounted. Such a non-destructive high-resolution probe provides three-dimensional insight on the morphological and structural evolution of crystalline as well as amorphous phases during high pressure and temperature treatment. To demonstrate the potentials of this new experimental technique the compression behavior of a basalt glass is investigated by X-ray absorption tomography, and diffraction/scattering tomography imaging of the structural changes during the polymerization of C₆₀ molecules under pressure is performed. Small size and weight of the loading frame and rotating module means that this apparatus is portable, and can be readily installed on most synchrotron facilities to take advantage of the diversity of three-dimensional imaging techniques available at beamlines. This experimental breakthrough should open new ways for in situ imaging of materials under extreme pressure-temperature-stress conditions, impacting diverse areas in physics, chemistry, geology or materials sciences.