Impact of poloxamer 188 (Pluronic F-68) additive on cell mechanical properties, quantification by real-time deformability cytometry

Loteprednol-Loaded Nanoformulations for Corneal Delivery by Quality-by-Design Concepts: Optimization, Characterization, and Anti-inflammatory Activity

Loteprednol etabonate (LE) is a topical corticosteroid that uses inflammatory conditions of the eye. It has a low ocular bioavailability and side effects such as corneal disorder, eye discharge, and ocular discomfort. Therefore, it was decided to select the delivery systems, which are solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), and nanoemulsion (NE). Design of experiments (DoE) of SLN, NLC, and NE formulations were formulated by using the quality by design (QbD) approach. Precirol® ATO 5 and oleic acid were used as solid and liquid lipids, respectively, in SLN, NLC, and NE formulations. Physiochemical characterization was performed on the formulations. The optimized formulations' inflammatory effects have been appraised on human corneal epithelial cells employing the ELISA test. Physicochemical characterization studies and inflammatory effects were appraised. The sizes of optimized formulations of SLN, NLC, and NE were 86.19 nm, 82.38 nm, and 126.35 nm, respectively, with minimum polydispersity. The release behavior of the formulations is composed of both diffusion and erosion. ELISA test results proved that the formulations significantly reduced IL-1 and IL-6 levels (p < 0.05). D-optimal mixture experimental design allowed us to develop the most precise formulations of SLN, NLC, and NE. Furthermore, the optimized formulations could be promising candidates for treating an inflammation-based corneal disease of the eye.

Expansion and differentiation of ex vivo cultured erythroblasts in scalable stirred bioreactors

Transfusion of donor-derived red blood cells (RBCs) is the most common form of cell therapy. Production of transfusion-ready cultured RBCs (cRBCs) is a promising replacement for the current, fully donor-dependent therapy. A single transfusion unit, however, contains 2 × 10¹² RBC, which requires large scale production. Here, we report on the scale-up of cRBC production from static cultures of erythroblasts to 3 L stirred tank bioreactors, and identify the effect of operating conditions on the efficiency of the process. Oxygen requirement of proliferating erythroblasts (0.55-2.01 pg/cell/h) required sparging of air to maintain the dissolved oxygen concentration at the tested setpoint (2.88 mg O₂ /L). Erythroblasts could be cultured at dissolved oxygen concentrations as low as 0.7 O₂ mg/ml without negative impact on proliferation, viability or differentiation dynamics. Stirring speeds of up to 600 rpm supported erythroblast proliferation, while 1800 rpm led to a transient halt in growth and accelerated differentiation followed by a recovery after 5 days of culture. Erythroblasts differentiated in bioreactors, with final enucleation levels and hemoglobin content similar to parallel cultures under static conditions.

Poloxamer 188 as surfactant in biological formulations - An alternative for polysorbate 20/80?

Surfactants are used to stabilize biologics. Particularly, polysorbates (Tween® 20 and Tween® 80) dominate the group of surfactants in protein and especially antibody drug products. Since decades drug developers rely on the ethoxylated sorbitan fatty acid ester mixtures to stabilize sensitive molecules such as proteins. Reasons are (i) excellent stabilizing properties, and (ii) well recognized safety and tolerability profile of these polysorbates in humans, especially for parenteral applications. However, over the past decade concerns regarding the stability of these two polysorbates were raised. The search of alternatives with preferably less reservations concerning degradation and product quality reducing issues leads, among others, to poloxamer 188 (e.g. Kolliphor® P188), a nonionic triblock-copolymer surfactant. This review sums up our current knowledge related to the characterization and physico-chemical properties of poloxamer 188, its analytics and stability properties for biological formulations. Furthermore, the advantages and disadvantages as a suitable polysorbate-alternative for the stabilization of biologics are discussed.

The Effect of Glucose and Poloxamer 188 on Red-Blood-Cell Aggregation

Glucose metabolism disorders contribute to the development of various diseases. Numerous studies show that these disorders not only change the normal values of biochemical parameters but also affect the mechanical properties of blood. To show the influence of glucose and poloxamer 188 (P188) on the mechanical properties of a red-blood-cell (RBC) suspension, we studied the aggregation of the cells. To show the mechanisms of the mechanical properties of blood, we studied the effects of glucose and poloxamer 188 (P188) on red-blood-cell aggregation. We used a model in which cells were suspended in a dextran 70 solution at a concentration of 2 g/dL with glucose and P188 at concentrations of 0–3 g/dL and 0–3 mg/mL, respectively. RBC aggregation was determined using an aggregometer, and measurements were performed every 4 min for 1 h. Such a procedure enabled the incubation of RBCs in solution. The aggregation index determined from the obtained syllectograms was used as a measure of aggregation. Both the presence of glucose and that of P188 increased the aggregation index with the incubation time until saturation was reached. The time needed for the saturation of the aggregation index increased with increasing glucose and P188 concentrations. As the concentrations of these components increased, the joint effect of glucose and P188 increased the weakening of RBC aggregation. The mechanisms of the observed changes in RBC aggregation in glucose and P188 solutions are discussed.

Concurrent Assessment of Deformability and Adhesiveness of Sickle Red Blood Cells by Measuring Perfusion of an Adhesive Artificial Microvascular Network

Biomarker development is a key clinical research need in sickle cell disease (SCD). Hemorheological parameters are excellent candidates as abnormal red blood cell (RBC) rheology plays a critical role in SCD pathophysiology. Here we describe a microfluidic device capable of evaluating RBC deformability and adhesiveness concurrently, by measuring their effect on perfusion of an artificial microvascular network (AMVN) that combines microchannels small enough to require RBC deformation, and laminin (LN) coating on channel walls to model intravascular adhesion. Each AMVN device consists of three identical capillary networks, which can be coated with LN (adhesive) or left uncoated (non-adhesive) independently. The perfusion rate for sickle RBCs in the LN-coated networks (0.18 ± 0.02 nL/s) was significantly slower than in non-adhesive networks (0.20 ± 0.02 nL/s), and both were significantly slower than the perfusion rate for normal RBCs in the LN-coated networks (0.22 ± 0.01 nL/s). Importantly, there was no overlap between the ranges of perfusion rates obtained for sickle and normal RBC samples in the LN-coated networks. Interestingly, treatment with poloxamer 188 decreased the perfusion rate for sickle RBCs in LN-coated networks in a dose-dependent manner, contrary to previous studies with conventional assays, but in agreement with the latest clinical trial which showed no clinical benefit. Overall, these findings suggest the potential utility of the adhesive AMVN device for evaluating the effect of novel curative and palliative therapies on the hemorheological status of SCD patients during clinical trials and in post-market clinical practice.

Characterization of Single-Cell Osmotic Swelling Dynamics for New Physical Biomarkers

Characterization of cell physical biomarkers is vital to understand cell properties and applicable for disease diagnostics. Current methods used to analyze physical phenotypes involve external forces to deform the cells. Alternatively, internal tension forces via osmotic swelling can also deform the cells. However, an established assumption contends that the forces generated during hypotonic swelling concentrated on the plasma membrane are incapable of assessing the physical properties of nucleated cells. Here, we utilized an osmotic swelling approach to characterize different types of nucleated cells. Using a microfluidic device for cell trapping arrays with truncated hanging micropillars (CellHangars), we isolated single cells and evaluated the swelling dynamics during the hypotonic challenge at 1 s time resolution. We demonstrated that cells with different mechanical phenotypes showed unique swelling dynamics signature. Different types of cells can be classified with an accuracy of up to ∼99%. We also showed that swelling dynamics can detect cellular mechanical property changes due to cytoskeleton disruption. Considering its simplicity, swelling dynamics offers an invaluable label-free physical biomarker for cells with potential applications in both biological studies and clinical practice.

Poloxamer 188 exerts a cryoprotective effect on rooster sperm and allows decreasing glycerol concentration in the freezing extender

Glycerol is the most widely used cryoprotectant for rooster sperm because it declines the mechanical damage to sperm during the freezing process. Despite its high molecular weight and viscosity, which may be cytotoxic, glycerol can cause damage to cells during the cryopreservation process, resulting in less fertility. Poloxamer 188 (P188) is an embryo cryopreservation supplement effective in many species and also for cell lines and plant cells. We tested the suitability of P188 in the cryopreservation of rooster sperm, considering post-thawing motility, abnormalities, membrane functionality (hypo-osmotic swelling test), mitochondrial activity, viability, apoptosis status, reactive oxygen species production, and ATP content after thawing and the fertility and hatchability after AI. We carried out a factorial experiment with glycerol concentrations of 2% glycerol (G2) and 8% glycerol (G8) and P188 concentrations of 0% (P0), 0.1% (P0.1), 0.5% (P0.5), and 1% (P1) as fixed effects, with replicate (seven) as a random effect. Interactions between glycerol and P188 were found, with G2P1 yielding higher quality and fertility. G8P0.5 yielded better in most parameters, however, not reaching G2P1. G2P1 showed significantly higher results for total and progressive motility, kinetic parameters (average path velocity, straight-line velocity, and linearity), membrane functionality, viability, mitochondrial activity, and ATP content and lower apoptosis, dead sperm, and reactive oxygen species production. G2P1 resulted in the highest percentages of fertilized and hatched eggs, with no effects in the hatched eggs ratio. Interestingly, G2 was less efficient in many parameters than G8 when combined with P0 and P0.1, being equivalent to G8 with P0.5 and superior to any G8 treatment as G2P1. In conclusion, P188 could improve rooster semen cryopreservation and allow reduction of glycerol in extenders, with a consequent impact in the poultry industry.

Purifying stem cell-derived red blood cells: a high-throughput label-free downstream processing strategy based on microfluidic spiral inertial separation and membrane filtration

Cell-based therapeutics, such as in vitro manufactured red blood cells (mRBCs), are different to traditional biopharmaceutical products (the final product being the cells themselves as opposed to biological molecules such as proteins) and that presents a challenge of developing new robust and economically feasible manufacturing processes, especially for sample purification. Current purification technologies have limited throughput, rely on expensive fluorescent or magnetic immunolabeling with a significant (up to 70%) cell loss and quality impairment. To address this challenge, previously characterized mechanical properties of umbilical cord blood CD34+ cells undergoing in vitro erythropoiesis were used to develop an mRBC purification strategy. The approach consists of two main stages: (a) a microfluidic separation using inertial focusing for deformability-based sorting of enucleated cells (mRBC) from nuclei and nucleated cells resulting in 70% purity and (b) membrane filtration to enhance the purity to 99%. Herein, we propose a new route for high-throughput (processing millions of cells/min and mls of medium/min) purification process for mRBC, leading to high mRBC purity while maintaining cell integrity and no alterations in their global gene expression profile. Further adaption of this separation approach offers a potential route for processing of a wide range of cellular products.