A magnetically focused molecular beam source for deposition of spin-polarised molecular surface layers

Spin Hyperpolarization in Modern Magnetic Resonance

Magnetic resonance techniques are successfully utilized in a broad range of scientific disciplines and in various practical applications, with medical magnetic resonance imaging being the most widely known example. Currently, both fundamental and applied magnetic resonance are enjoying a major boost owing to the rapidly developing field of spin hyperpolarization. Hyperpolarization techniques are able to enhance signal intensities in magnetic resonance by several orders of magnitude, and thus to largely overcome its major disadvantage of relatively low sensitivity. This provides new impetus for existing applications of magnetic resonance and opens the gates to exciting new possibilities. In this review, we provide a unified picture of the many methods and techniques that fall under the umbrella term "hyperpolarization" but are currently seldom perceived as integral parts of the same field. Specifically, before delving into the individual techniques, we provide a detailed analysis of the underlying principles of spin hyperpolarization. We attempt to uncover and classify the origins of hyperpolarization, to establish its sources and the specific mechanisms that enable the flow of polarization from a source to the target spins. We then give a more detailed analysis of individual hyperpolarization techniques: the mechanisms by which they work, fundamental and technical requirements, characteristic applications, unresolved issues, and possible future directions. We are seeing a continuous growth of activity in the field of spin hyperpolarization, and we expect the field to flourish as new and improved hyperpolarization techniques are implemented. Some key areas for development are in prolonging polarization lifetimes, making hyperpolarization techniques more generally applicable to chemical/biological systems, reducing the technical and equipment requirements, and creating more efficient excitation and detection schemes. We hope this review will facilitate the sharing of knowledge between subfields within the broad topic of hyperpolarization, to help overcome existing challenges in magnetic resonance and enable novel applications.

Multiple echoes in beam spin-echo spectroscopy and their effect on measurements of ultra-fast dynamics

Helium (³He) spin-echo is a powerful experimental technique used to probe ultra-fast atomic scale surface dynamics. The analysis of these measurements is typically performed assuming there is only a single spin-echo condition, expected to produce a constant signal for pure elastic scattering, a monotonically decaying signal for quasi-elastic scattering and oscillations from inelastic scattering events. In the present work, we show that there are in fact four spin-echoes which must be correctly accounted for, and that even in the case of elastic scattering these additional echoes lead to oscillations which could mistakenly be interpreted as being due to inelastic scattering. We demonstrate that it is possible to accurately simulate the experimental data by propagating the³He through the measured magnetic field profile of the apparatus and considering the geometry of the machine, allowing the effect of these additional echoes to be disentangled from inelastic scattering events in future³He spin-echo measurements.

Measuring surface phonons using molecular spin-echo

A new method to measure surface phonons with a molecular beam is presented. The method extends the principles of ³He spin-echo spectroscopy, to the more complex case of a molecular beam exchanging energy with the surface. Measurements are presented for inelastic scattering of D₂ from a Cu(111) surface. Similarly to helium spin-echo, experiments can be performed along optimal tilted projections making it possible to resolve energy peaks with a high energy resolution which is not restricted by the spread of energies of the incident beam. Two analysis methods for these molecular spin echo experiments are presented. A classical approach, analogous to that used for helium spin-echo, explains the most dominant excitation peaks measured, whereas a semi-classical approach allows us to identify smaller peaks which are related to the complexity of the multiple spin-rotation states which exist for molecules.

Stopping molecular rotation using coherent ultra-low-energy magnetic manipulations

Rotational motion lies at the heart of intermolecular, molecule-surface chemistry and cold molecule science, motivating the development of methods to excite and de-excite rotations. Existing schemes involve perturbing the molecules with photons or electrons which supply or remove energy comparable to the rotational level spacing. Here, we study the possibility of de-exciting the molecular rotation of a D₂ molecule, from J = 2 to the non-rotating J = 0 state, without using an energy-matched perturbation. We show that passing the beam through a 1 m long magnetic field, which splits the rotational projection states by only 10⁻¹²eV, can change the probability that a molecule-surface collision will stop a molecule from rotating and lose rotational energy which is 9 orders larger than that of the magnetic manipulation. Calculations confirm that different rotational orientations have different de-excitation probabilities but underestimate rotational flips (∆m_J\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\ne$$\end{document}≠0), highlighting the importance of the results as a sensitive benchmark for further developing theoretical models of molecule-surface interactions.

Manipulating the rotational motions of molecules may provide a tool for controlling chemical processes. Here the authors demonstrate that the rotation of a D₂ molecule can be stopped, upon collision with a metal surface, by a magnetic field that affects the rotational levels to a much smaller extent than the energy difference upon de-excitation.

Focusing and spin polarization of atomic hydrogen beam

We have developed a spin-polarized-hydrogen beam with a hexapole magnet. By combining the beam chopper and pulsed laser ionization detection, the time-of-flight of the hydrogen beam was measured, and the dependence of the beam profile on the velocity was acquired, which was consistent with the beam trajectory simulations. The spin polarization of the beam was analyzed by using the Stern-Gerlach-type magnet in combination with the spatial scan of the detection laser. The spin polarization was about 95% at a focusing condition due to the hexapole magnet. The polarization was, on the other hand, reduced to about 70% for the beam at higher velocities, which is consistent with simulation results.

Pd-based bimetallic catalysts for parahydrogen-induced polarization in heterogeneous hydrogenations

Production of hyperpolarized catalyst-free gases and liquids by heterogeneous hydrogenation with parahydrogen can be useful for various technical as well as biomedical applications, including in vivo studies, investigations of mechanisms of industrially important catalytic processes, enrichment of nuclear spin isomers of polyatomic gases, and more. In this regard, the wide systematic search for heterogeneous catalysts effective in pairwise H 2 addition required for the observation of parahydrogen-induced polarization (PHIP) effects is crucial. Here in this work we demonstrate the competitive advantage of Pd-based bimetallic catalysts for PHIP in heterogeneous hydrogenations (HET-PHIP). The dilution of catalytically active Pd with less active Ag or In atoms provides the formation of atomically dispersed Pd 1 sites on the surface of Pd-based bimetallic catalysts, which are significantly more selective toward pairwise H 2 addition compared to the monometallic Pd. Furthermore, the choice of the dilution metal (Ag or In) has a pronounced effect on the efficiency of bimetallic catalysts in HET-PHIP, as revealed by comparing Pd-Ag and Pd-In bimetallic catalysts.

Material properties particularly suited to be measured with helium scattering: selected examples from 2D materials, van der Waals heterostructures, glassy materials, catalytic substrates, topological insulators and superconducting radio frequency materials

Helium Atom Scattering (HAS) and Helium Spin-Echo scattering (HeSE), together helium scattering, are well established, but non-commercial surface science techniques. They are characterised by the beam inertness and very low beam energy (<0.1 eV) which allows essentially all materials and adsorbates, including fragile and/or insulating materials and light adsorbates such as hydrogen to be investigated on the atomic scale. At present there only exist an estimated less than 15 helium and helium spin-echo scattering instruments in total, spread across the world. This means that up till now the techniques have not been readily available for a broad scientific community. Efforts are ongoing to change this by establishing a central helium scattering facility, possibly in connection with a neutron or synchrotron facility. In this context it is important to clarify what information can be obtained from helium scattering that cannot be obtained with other surface science techniques. Here we present a non-exclusive overview of a range of material properties particularly suited to be measured with helium scattering: (i) high precision, direct measurements of bending rigidity and substrate coupling strength of a range of 2D materials and van der Waals heterostructures as a function of temperature, (ii) direct measurements of the electron-phonon coupling constant λ exclusively in the low energy range (<0.1 eV, tuneable) for 2D materials and van der Waals heterostructures (iii) direct measurements of the surface boson peak in glassy materials, (iv) aspects of polymer chain surface dynamics under nano-confinement (v) certain aspects of nanoscale surface topography, (vi) central properties of surface dynamics and surface diffusion of adsorbates (HeSE) and (vii) two specific science case examples - topological insulators and superconducting radio frequency materials, illustrating how combined HAS and HeSE are necessary to understand the properties of quantum materials. The paper finishes with (viii) examples of molecular surface scattering experiments and other atom surface scattering experiments which can be performed using HAS and HeSE instruments.

Setting benchmarks for modelling gas-surface interactions using coherent control of rotational orientation states

The coherent evolution of a molecular quantum state during a molecule-surface collision is a detailed descriptor of the interaction potential which was so far inaccessible to measurements. Here we use a magnetically controlled molecular beam technique to study the collision of rotationally oriented ground state hydrogen molecules with a lithium fluoride surface. The coherent control nature of the technique allows us to measure the changes in the complex amplitudes of the rotational projection quantum states, and express them using a scattering matrix formalism. The quantum state-to-state transition probabilities we extract reveal a strong dependency of the molecule-surface interaction on the rotational orientation of the molecules, and a remarkably high probability of the collision flipping the rotational orientation. The scattering matrix we obtain from the experimental data delivers an ultra-sensitive benchmark for theory to reproduce, guiding the development of accurate theoretical models for the interaction of H₂ with a solid surface.

A fundamental and predictive understanding of molecule-surface interactions is challenging to obtain. Here the authors report an experimental technique allowing direct measurement of the scattering matrix, which reports on the coherent evolution of quantum states of a molecule scattering from a surface.