Ab initio structure and thermodynamics of the RPBE-D3 water/vapor interface by neural-network molecular dynamics

Random encounters dominate water-water interactions at supercritical conditions

Supercritical water is widely present in Earth's crust and has a great potential as an environmentally friendly solvent. Water also serves as the prototype for directional hydrogen bonding at ambient conditions. However, the question of whether supercritical water is still hydrogen-bonded or how water molecules interact en route to the supercritical regime is a matter of controversial discussions. We present terahertz (THz) spectra, which directly probe the intermolecular interactions of water under these extreme conditions. While we spectroscopically detect the liquid-gas phase transition just below the critical point, THz spectra of the high-temperature gas phase are indistinguishable from those of supercritical water at the same density. The accompanying ab initio simulations provide the molecular underpinnings: The water-water contacts at supercritical conditions are essentially orientationally random.

TIP 4 P 2005 Ice : Simulating water with two molecular states

Rigid, non-polarizable water models are very efficient from a computational point of view, and some of them have a great ability in predicting experimental properties. There is, however, little room for improvement in simulating water with this strategy, whose main shortcoming is that water molecules do not change their interaction parameters in response to the local molecular landscape. In this work, we propose a novel modeling strategy that involves using two rigid non-polarizable models as states that water molecules can adopt depending on their molecular environment. During the simulation, molecules dynamically transition from one state to another depending on a local order parameter that quantifies some local structural feature. In particular, molecules belonging to low- and high-tetrahedral order environments are represented with the TIP4P/2005 and TIP4P/Ice rigid models, respectively. In this way, the interaction between water molecules is strengthened when they acquire a tetrahedral coordination, which can be viewed as an effective way of introducing polarization effects. We call the resulting model TIP4P2005Ice and show that it outperforms either of the rigid models that build it. This multi-state strategy only slows down simulations by a factor of 1.5 compared to using a standard non-polarizable model and holds great promise for improving simulations of water and aqueous solutions.

Formation and Dynamics of Imidazole Supramolecular Chains Investigated by Deep Potential Molecular Dynamics Simulation

Imidazole-based materials have attracted considerable attention due to their promising potential for facilitating anhydrous proton transport at high temperatures. Herein, a machine learning-based deep potential (DP) model for bulk imidazole with first-principles accuracy is developed. The trained model exhibits remarkable accuracy in predicting energies and forces, with minor errors of 4.71 × 10-4 eV/atom and 3.23 × 10-2 eV/Å, respectively. Utilizing DP molecular dynamics simulations, we have systematically investigated the temperature-dependent formation and dynamics of imidazole supramolecular chains through the partial radial distribution function, quantification of hydrogen bond numbers, incoherent intermediate scattering function, and diffusion coefficient. The findings reveal the influence of temperature on the proton transport path following either the "Grotthuss" and "vehicle" mechanism.

Density isobar of water and melting temperature of ice: Assessing common density functionals

We investigate the density isobar of water and the melting temperature of ice using six different density functionals. Machine-learning potentials are employed to ensure computational affordability. Our findings reveal significant discrepancies between various base functionals. Notably, even the choice of damping can result in substantial differences. Overall, the outcomes obtained through density functional theory are not entirely satisfactory across most utilized functionals. All functionals exhibit significant deviations either in the melting temperature or equilibrium volume, with most of them even predicting an incorrect volume difference between ice and water. Our heuristic analysis indicates that a hybrid functional with 25% exact exchange and van der Waals damping averaged between zero and Becke-Johnson dampings yields the closest agreement with experimental data. This study underscores the necessity for further enhancements in the treatment of van der Waals interactions and, more broadly, density functional theory to enable accurate quantitative predictions for molecular liquids.

A classical density functional theory for solvation across length scales

A central aim of multiscale modeling is to use results from the Schrödinger equation to predict phenomenology on length scales that far exceed those of typical molecular correlations. In this work, we present a new approach rooted in classical density functional theory (cDFT) that allows us to accurately describe the solvation of apolar solutes across length scales. Our approach builds on the Lum-Chandler-Weeks (LCW) theory of hydrophobicity [K. Lum et al., J. Phys. Chem. B 103, 4570 (1999)] by constructing a free energy functional that uses a slowly varying component of the density field as a reference. From a practical viewpoint, the theory we present is numerically simpler and generalizes to solutes with soft-core repulsion more easily than LCW theory. Furthermore, by assessing the local compressibility and its critical scaling behavior, we demonstrate that our LCW-style cDFT approach contains the physics of critical drying, which has been emphasized as an essential aspect of hydrophobicity by recent theories. As our approach is parameterized on the two-body direct correlation function of the uniform fluid and the liquid-vapor surface tension, it straightforwardly captures the temperature dependence of solvation. Moreover, we use our theory to describe solvation at a first-principles level on length scales that vastly exceed what is accessible to molecular simulations.

Comparing machine learning potentials for water: Kernel-based regression and Behler-Parrinello neural networks

In this paper, we investigate the performance of different machine learning potentials (MLPs) in predicting key thermodynamic properties of water using RPBE + D3. Specifically, we scrutinize kernel-based regression and high-dimensional neural networks trained on a highly accurate dataset consisting of about 1500 structures, as well as a smaller dataset, about half the size, obtained using only on-the-fly learning. This study reveals that despite minor differences between the MLPs, their agreement on observables such as the diffusion constant and pair-correlation functions is excellent, especially for the large training dataset. Variations in the predicted density isobars, albeit somewhat larger, are also acceptable, particularly given the errors inherent to approximate density functional theory. Overall, this study emphasizes the relevance of the database over the fitting method. Finally, this study underscores the limitations of root mean square errors and the need for comprehensive testing, advocating the use of multiple MLPs for enhanced certainty, particularly when simulating complex thermodynamic properties that may not be fully captured by simpler tests.

High-Dimensional Neural Network Potentials for Accurate Prediction of Equation of State: A Case Study of Methane

Machine learning-based interatomic potentials, such as those provided by neural networks, are increasingly important in molecular dynamics simulations. In the present work, we consider the applicability and robustness of machine learning molecular dynamics to predict the equation of state properties of methane by using high-dimensional neural network potentials (HDNNPs). We investigate two different strategies for generating training data: one strategy based upon bulk representations using periodic cells and another strategy based upon clusters of molecules. We assess the accuracy of the trained potentials by predicting the equilibrium mass density for a wide range of thermodynamic conditions to characterize the liquid phase, supercritical fluid, and gas phase, as well as the liquid-vapor coexistence curve. Our results show an excellent agreement with reference phase diagrams, with an average error below ∼2% for all studied phases. Moreover, we confirm the applicability of models trained on cluster data sets for producing accurate and reliable results.

Realistic phase diagram of water from "first principles" data-driven quantum simulations

Since the experimental characterization of the low-pressure region of water's phase diagram in the early 1900s, scientists have been on a quest to understand the thermodynamic stability of ice polymorphs on the molecular level. In this study, we demonstrate that combining the MB-pol data-driven many-body potential for water, which was rigorously derived from "first principles" and exhibits chemical accuracy, with advanced enhanced-sampling algorithms, which correctly describe the quantum nature of molecular motion and thermodynamic equilibria, enables computer simulations of water's phase diagram with an unprecedented level of realism. Besides providing fundamental insights into how enthalpic, entropic, and nuclear quantum effects shape the free-energy landscape of water, we demonstrate that recent progress in "first principles" data-driven simulations, which rigorously encode many-body molecular interactions, has opened the door to realistic computational studies of complex molecular systems, bridging the gap between experiments and simulations.

Are Neural Network Potentials Trained on Liquid States Transferable to Crystal Nucleation? A Test on Ice Nucleation in the mW Water Model

Neural network potentials (NNPs) are increasingly being used to study processes that happen on long time scales. A typical example is crystal nucleation, which rate is controlled by the occurrence of a rare fluctuation, i.e., the appearance of the critical nucleus. Because the properties of this nucleus are far from those of the bulk crystal, it is yet unclear whether NN potentials trained on equilibrium liquid states can accurately describe nucleation processes. So far, nucleation studies on NNPs have been limited to ab initio models whose nucleation properties are unknown, preventing an accurate comparison. Here we train a NN potential on the mW model of water─a classical three-body potential whose nucleation time scale is accessible in standard simulations. We show that a NNP trained only on a small number of liquid state points can reproduce with great accuracy the nucleation rates and free energy barriers of the original model, computed from both spontaneous and biased trajectories, strongly supporting the use of NNPs to study nucleation events.

A neural network potential with self-trained atomic fingerprints: A test with the mW water potential

We present a neural network (NN) potential based on a new set of atomic fingerprints built upon two- and three-body contributions that probe distances and local orientational order, respectively. Compared with the existing NN potentials, the atomic fingerprints depend on a small set of tunable parameters that are trained together with the NN weights. In addition to simplifying the selection of the atomic fingerprints, this strategy can also considerably increase the overall accuracy of the network representation. To tackle the simultaneous training of the atomic fingerprint parameters and NN weights, we adopt an annealing protocol that progressively cycles the learning rate, significantly improving the accuracy of the NN potential. We test the performance of the network potential against the mW model of water, which is a classical three-body potential that well captures the anomalies of the liquid phase. Trained on just three state points, the NN potential is able to reproduce the mW model in a very wide range of densities and temperatures, from negative pressures to several GPa, capturing the transition from an open random tetrahedral network to a dense interpenetrated network. The NN potential also reproduces very well properties for which it was not explicitly trained, such as dynamical properties and the structure of the stable crystalline phases of mW.

Thermal transport across copper-water interfaces according to deep potential molecular dynamics

Nanoscale thermal transport at solid-liquid interfaces plays an essential role in many engineering fields. This work performs deep potential molecular dynamics (DPMD) simulations to investigate thermal transport across copper-water interfaces. Unlike traditional classical molecular dynamics (CMD) simulations, we independently train a deep learning potential (DLP) based on density functional theory (DFT) calculations and demonstrated its high computational efficiency and accuracy. The trained DLP predicts radial distribution functions (RDFs), vibrational densities of states (VDOS), density curves, and thermal conductivity of water confined in the nanochannel at a DFT accuracy. The thermal conductivity decreases slightly with an increase in the channel height, while the influence of the cross-sectional area is negligible. Moreover, the predicted interfacial thermal conductance (ITC) across the copper-water interface by DPMD is 2.505 × 10⁸ W m^-2 K^-1, the same order of magnitude as the CMD and experimental results but with a high computational accuracy. This work seeks to simulate the thermal transport properties of solid-liquid interfaces with DFT accuracy at large-system and long-time scales.

A "short blanket" dilemma for a state-of-the-art neural network potential for water: Reproducing experimental properties or the physics of the underlying many-body interactions?

Deep neural network (DNN) potentials have recently gained popularity in computer simulations of a wide range of molecular systems, from liquids to materials. In this study, we explore the possibility of combining the computational efficiency of the DeePMD framework and the demonstrated accuracy of the MB-pol data-driven, many-body potential to train a DNN potential for large-scale simulations of water across its phase diagram. We find that the DNN potential is able to reliably reproduce the MB-pol results for liquid water, but provides a less accurate description of the vapor-liquid equilibrium properties. This shortcoming is traced back to the inability of the DNN potential to correctly represent many-body interactions. An attempt to explicitly include information about many-body effects results in a new DNN potential that exhibits the opposite performance, being able to correctly reproduce the MB-pol vapor-liquid equilibrium properties, but losing accuracy in the description of the liquid properties. These results suggest that DeePMD-based DNN potentials are not able to correctly "learn" and, consequently, represent many-body interactions, which implies that DNN potentials may have limited ability to predict the properties for state points that are not explicitly included in the training process. The computational efficiency of the DeePMD framework can still be exploited to train DNN potentials on data-driven many-body potentials, which can thus enable large-scale, "chemically accurate" simulations of various molecular systems, with the caveat that the target state points must have been adequately sampled by the reference data-driven many-body potential in order to guarantee a faithful representation of the associated properties.

Local Molecular Field Theory for Coulomb Interactions in Aqueous Solutions

Coulomb interactions play a crucial role in a wide array of processes in aqueous solutions but present conceptual and computational challenges to both theory and simulations. We review recent developments in an approach addressing these challenges─local molecular field (LMF) theory. LMF theory exploits an exact and physically suggestive separation of intermolecular Coulomb interactions into strong short-range and uniformly slowly varying long-range components. This allows us to accurately determine the averaged effects of the long-range components on the short-range structure using effective single particle fields and analytical corrections, greatly reducing the need for complex lattice summation techniques used in most standard approaches. The simplest use of these ideas in aqueous solutions leads to the short solvent (SS) model, where both solvent-solvent and solute-solvent Coulomb interactions have only short-range components. Here we use the SS model to give a simple description of pairing of nucleobases and biologically relevant ions in water.

Accurate diffusion coefficients of the excess proton and hydroxide in water via extensive ab initio simulations with different schemes

Despite its simple molecular formula, obtaining an accurate in silico description of water is far from straightforward. Many of its very peculiar properties are quite elusive, and in particular, obtaining good estimations of the diffusion coefficients of the solvated proton and hydroxide at a reasonable computational cost has been an unsolved challenge until now. Here, I present extensive results of several unusually long ab initio molecular dynamics (MD) simulations employing different combinations of the Born-Oppenheimer and second-generation Car-Parrinello MD propagation methods with different ensembles (NVE and NVT) and thermostats, which show that these methods together with the RPBE-D3 functional provide a very accurate estimation of the diffusion coefficients of the solvated H₃O⁺ and OH^- ions, together with an extremely accurate description of several properties of neutral water (such as the structure of the liquid and its diffusion and shear viscosity coefficients). In addition, I show that the estimations of D_H3O⁺ and D_OH^- depend dramatically on the simulation length, being necessary to reach timescales in the order of hundreds of picoseconds to obtain reliable results.

Local Ice-like Structure at the Liquid Water Surface

Experiments and computer simulations have established that liquid water's surfaces can deviate in important ways from familiar bulk behavior. Even in the simplest case of an air-water interface, distinctive layering, orientational biases, and hydrogen bond arrangements have been reported, but an overarching picture of their origins and relationships has been incomplete. Here we show that a broad set of such observations can be understood through an analogy with the basal face of crystalline ice. Using simulations, we demonstrate a number of structural similarities between water and ice surfaces, suggesting the presence of domains at the air-water interface with ice-like features that persist over 2-3 molecular diameters. Most prominent is a shared characteristic layering of molecular density and orientation perpendicular to the interface. Lateral correlations of hydrogen bond network geometry point to structural similarities in the parallel direction as well. Our results bolster and significantly extend previous conceptions of ice-like structure at the liquid's boundary and suggest that the much-discussed quasi-liquid layer on ice evolves subtly above the melting point into a quasi-ice layer at the surface of liquid water.

Connection between water's dynamical and structural properties: Insights from ab initio simulations

SignificanceFirst-principles calculations, which explicitly account for the electronic structure of matter, can shed light on the molecular structure and dynamics of water in its supercooled state. In this work, we use density functional theory, which relies on a functional to describe electronic exchange and correlations, to evaluate which functional best describes the temperature evolution of bulk water transport coefficients. We also assess the validity of the Stokes-Einstein relation for all the functionals in the temperature range studied, and explore the link between structure and dynamics. Based on these results, we show how transport coefficients can be computed from structural descriptors, which require shorter simulation times to converge, and we point toward strategies to develop better functionals.

Self-consistent determination of long-range electrostatics in neural network potentials

Machine learning has the potential to revolutionize the field of molecular simulation through the development of efficient and accurate models of interatomic interactions. Neural networks can model interactions with the accuracy of quantum mechanics-based calculations, but with a fraction of the cost, enabling simulations of large systems over long timescales. However, implicit in the construction of neural network potentials is an assumption of locality, wherein atomic arrangements on the nanometer-scale are used to learn interatomic interactions. Because of this assumption, the resulting neural network models cannot describe long-range interactions that play critical roles in dielectric screening and chemical reactivity. Here, we address this issue by introducing the self-consistent field neural network - a general approach for learning the long-range response of molecular systems in neural network potentials that relies on a physically meaningful separation of the interatomic interactions - and demonstrate its utility by modeling liquid water with and without applied fields.

Learning intermolecular forces at liquid-vapor interfaces

By adopting a perspective informed by contemporary liquid-state theory, we consider how to train an artificial neural network potential to describe inhomogeneous, disordered systems. We find that neural network potentials based on local representations of atomic environments are capable of describing some properties of liquid-vapor interfaces but typically fail for properties that depend on unbalanced long-ranged interactions that build up in the presence of broken translation symmetry. These same interactions cancel in the translationally invariant bulk, allowing local neural network potentials to describe bulk properties correctly. By incorporating explicit models of the slowly varying long-ranged interactions and training neural networks only on the short-ranged components, we can arrive at potentials that robustly recover interfacial properties. We find that local neural network models can sometimes approximate a local molecular field potential to correct for the truncated interactions, but this behavior is variable and hard to learn. Generally, we find that models with explicit electrostatics are easier to train and have higher accuracy. We demonstrate this perspective in a simple model of an asymmetric dipolar fluid, where the exact long-ranged interaction is known, and in an ab initio water model, where it is approximated.

Contribution of Different Molecules and Moieties to the Surface Tension in Aqueous Surfactant Solutions. II: Role of the Size and Charge Sign of the Counterions

Understanding the role of the counterion species in surfactant solutions is a complicated task, made harder by the fact that, experimentally, it is not possible to vary independently bulk and surface quantities. Here, we perform molecular dynamics simulations at constant surface coverage of the liquid/vapor interface of lithium, sodium, potassium, rubidium, and cesium dodecyl sulfate aqueous solutions. We investigate the effect of counterion type and charge sign on the surface tension of the solution, analyzing the contribution of different species and moieties to the lateral pressure profile. The observed trends are qualitatively compatible with the Hofmeister series, with the notable exception of sodium. We point out a possible shortcoming of what is at the moment, in our experience, the most realistic nonpolarizable force field (CHARMM36) that includes the parametrization for the whole series of alkali counterions. In the artificial system where the counterion and surfactant charges are inverted in sign, the counterions become considerably harder. This charge inversion changes considerably the surface tension contributions of the counterions, surfactant headgroups, and water molecules, stressing the key role of the hardness of the counterions in this respect. However, the hydration free energy gain of the counterions, occurring upon charge inversion, is compensated by the concomitant free energy loss of the headgroups and water molecules, leading to a negligible change in the surface tension of the entire system.

Toward a First-Principles Framework for Predicting Collective Properties of Electrolytes

Given the universal importance of electrolyte solutions, it is natural to expect that we have a nearly complete understanding of the fundamental properties of these solutions (e.g., the chemical potential) and that we can therefore explain, predict, and control the phenomena occurring in them. In fact, reality falls short of these expectations. But, recent advances in the simulation and modeling of electrolyte solutions indicate that it should soon be possible to make progress toward these goals. In this Account, we will discuss the use of first-principles interaction potentials based in quantum mechanics (QM) to enhance our understanding of electrolyte solutions. Specifically, we will focus on the use of quantum density functional theory (DFT) combined with molecular dynamics simulation (DFT-MD) as the foundation for our approach. The overarching concept is to understand and accurately reproduce the balance between local or short-ranged (SR) structural details and long-range (LR) correlations, allowing the prediction of the thermodynamics of both single ions in solution as well as the collective interactions characterized by activity/osmotic coefficients. In doing so, relevant collective motions and driving forces characterized by chemical potentials can be determined.In this Account, we will make the case that understanding electrolyte solutions requires a faithful QM representation of the SR nature of the ion-ion, ion-water, and water-water interactions. However, the number of molecules that is required for collective behavior makes the direct application of high-level QM methods that contain the best SR physics untenable, making methods that balance accuracy and efficiency a practical goal. Alternatives such as continuum solvent models (CSMs) and empirically based classical molecular dynamics have been extensively employed to resolve this problem but without yet overcoming the fundamental issue of SR accuracy. We will demonstrate that accurately describing the SR interaction is imperative for predicting both intrinsic properties, namely, at infinite dilution, and collective properties of electrolyte solutions.DFT has played an important role in our understanding of condensed phase systems, e.g., bulk liquid water, the air-water interface, ions in bulk, and at the air-water interface. This approach holds huge promise to provide benchmark calculations of electrolyte solution properties that will allow for the development and improvement of more efficient methods, as well as an enhanced understanding of fundamental phenomena. However, the standard protocol using the generalized gradient approximation with van der Waals (vdW) correction requires improvement in order to achieve a high level of quantitative accuracy. Simply simulating with higher level DFT functionals may not be the best route considering the significant computational cost. Alternative methods of incorporating information from higher levels of QM should be explored; e.g., using force matching techniques on small clusters, where high level benchmark calculations are possible, to develop ideal correction terms to the DFT functional is a promising possibility. We argue that DFT with statistical mechanics is becoming an increasingly useful framework enabling the prediction of collective electrolyte properties.

Phase Diagram of a Deep Potential Water Model

Using the Deep Potential methodology, we construct a model that reproduces accurately the potential energy surface of the SCAN approximation of density functional theory for water, from low temperature and pressure to about 2400 K and 50 GPa, excluding the vapor stability region. The computational efficiency of the model makes it possible to predict its phase diagram using molecular dynamics. Satisfactory overall agreement with experimental results is obtained. The fluid phases, molecular and ionic, and all the stable ice polymorphs, ordered and disordered, are predicted correctly, with the exception of ice III and XV that are stable in experiments, but metastable in the model. The evolution of the atomic dynamics upon heating, as ice VII transforms first into ice VII^{''} and then into an ionic fluid, reveals that molecular dissociation and breaking of the ice rules coexist with strong covalent fluctuations, explaining why only partial ionization was inferred in experiments.

Vapor-liquid equilibrium of water with the MB-pol many-body potential

Among the many existing molecular models of water, the MB-pol many-body potential has emerged as a remarkably accurate model, capable of reproducing thermodynamic, structural, and dynamic properties across water's solid, liquid, and vapor phases. In this work, we assessed the performance of MB-pol with respect to an important set of properties related to vapor-liquid coexistence and interfacial behavior. Through direct coexistence classical molecular dynamics simulations at temperatures of 400 K < T < 600 K, we calculated properties such as equilibrium coexistence densities, vapor-liquid interfacial tension, vapor pressure, and enthalpy of vaporization and compared the MB-pol results to experimental data. We also compared rigid vs fully flexible variants of the MB-pol model and evaluated system size effects for the properties studied. We found that the MB-pol model predictions are in good agreement with experimental data, even for temperatures approaching the vapor-liquid critical point; this agreement was largely insensitive to system sizes or the rigid vs flexible treatment of the intramolecular degrees of freedom. These results attest to the chemical accuracy of MB-pol and its high degree of transferability, thus enabling MB-pol's application across a large swath of water's phase diagram.

Machine learning meets chemical physics

Over recent years, the use of statistical learning techniques applied to chemical problems has gained substantial momentum. This is particularly apparent in the realm of physical chemistry, where the balance between empiricism and physics-based theory has traditionally been rather in favor of the latter. In this guest Editorial for the special topic issue on "Machine Learning Meets Chemical Physics," a brief rationale is provided, followed by an overview of the topics covered. We conclude by making some general remarks.

A purely kinetic description of the evaporation of water droplets

The process of water evaporation, although deeply studied, does not enjoy a kinetic description that captures known physics and can be integrated with other detailed processes such as drying of catalytic membranes embedded in vapor-fed devices and chemical reactions in aerosol whose volumes are changing dynamically. In this work, we present a simple, three-step kinetic model for water evaporation that is based on theory and validated by using well-established thermodynamic models of droplet size as a function of time, temperature, and relative humidity as well as data from time-resolved measurements of evaporating droplet size. The kinetic mechanism for evaporation is a combination of two limiting processes occurring in the highly dynamic liquid-vapor interfacial region: direct first order desorption of a single water molecule and desorption resulting from a local fluctuation, described using third order kinetics. The model reproduces data over a range of relative humidities and temperatures only if the interface that separates bulk water from gas phase water has a finite width, consistent with previous experimental and theoretical studies. The influence of droplet cooling during rapid evaporation on the kinetics is discussed; discrepancies between the various models point to the need for additional experimental data to identify their origin.