Barley yield and malt quality affected by fall and spring planting under rainfed conditions

Background

As a result of the changing climate characteristics, it is necessary to reevaluate the planting time for crop plants. The aim of the present study was to determine the quality characteristics of malting barley cultivars in fall and spring plantings.

Methods

Sixteen malting barley cultivars were used. Two fall-planted and two spring-planted trials were conducted in two consecutive years. The field trials were carried out in a randomized complete block design with four replications in Tokat province of Turkey under rainfed conditions.

Results

Grain yields varied between 4.38 and 5.71 t/ha in fall-planted trials and between 3.12 and 4.89 t/ha in spring-planted trials. Malt extracts were between 77.0% and 78.0% kg in fall-planted trials and between 73.9% and 76.9% in spring-planted trials. Alpha amylase activities ranged from 77.9 to 81.4 Ceralpha unit (CU)/g in fall-planted trials and from 80.8 to 100.9 CU/g in spring-planted trials. Diastatic power ranged from 194.5 to 331.1 Windisch-Kolbach unit (°WK) in fall-planted trials and from 129.0 to 259.8 °WK in spring-planted trials. GGE biplot analysis indicated that winter barley cultivar Durusu and facultative barley cultivar Ince-04 were the best with consistent grain yields while Ince-04 was the best with stable malt extract across the trials. In scatter plot graphics, winter barley cultivars Durusu, Aydanhanim, Yildiz and facultative Ince-04 had superior performance in fall-plantings for grain yield and malt extract. In spring planting, facultative Ince-04 had higher performance than those of other cultivars. In spring plantings, facultative or winter barley cultivars that do not have strong vernalization requirement had better yield and malt quality. Appropriate planting time and cultivars can allow a better use of available water in malt barley production under rainfed conditions. Lastly, instead of evaluating the grain yield or malt quality alone, it would be best to evaluate the target product (malt extract percentage) obtained from a particular region, process, or production methodology.

Fine mapping of Rha2 in barley reveals candidate genes for resistance against cereal cyst nematode

The cereal cyst nematode resistance locus Rha2 was mapped to a 978 kbp region on the long arm of barley chromosome 2H. Three candidate genes are discussed. The cereal cyst nematode (CCN) Heterodera avenae is a soil-borne obligate parasite that can cause severe damage to cereals. This research involved fine mapping of Rha2, a CCN resistance locus on chromosome 2H of barley. Rha2 was previously mapped relative to restriction fragment length polymorphisms (RFLPs) in two mapping populations. Anchoring of flanking RFLP clone sequences to the barley genome assembly defined an interval of 5077 kbp. Genotyping-by-sequencing of resistant and susceptible materials led to the discovery of potentially useful single nucleotide polymorphisms (SNPs). Assays were designed for these SNPs and applied to mapping populations. This narrowed the region of interest to 3966 kbp. Further fine mapping was pursued by crossing and backcrossing the resistant cultivar Sloop SA to its susceptible ancestor Sloop. Evaluation of F₂ progeny confirmed that the resistance segregates as a single dominant gene. Genotyping of 9003 BC₂F₂ progeny identified recombinants. Evaluation of recombinant BC₂F₃ progeny narrowed the region of interest to 978 kbp. Two of the SNPs within this region proved to be diagnostic of CCN resistance across a wide range of barley germplasm. Fluorescence-based and gel-based assays were developed for these SNPs for use in marker-assisted selection. Within the candidate region of the reference genome, there are nine high-confidence predicted genes. Three of these, one that encodes RAR1 (a cysteine- and histidine-rich domain-containing protein), one that is predicted to encode an acetylglutamate kinase and one that is predicted to encode a tonoplast intrinsic protein, are discussed as candidate genes for CCN resistance.

Quantitative trait loci for yield and grain plumpness relative to maturity in three populations of barley (Hordeum vulgare L.) grown in a low rain-fall environment

Identifying yield and grain plumpness QTL that are independent of developmental variation or phenology is of paramount importance for developing widely adapted and stable varieties through the application of marker assisted selection. The current study was designed to dissect the genetic basis of yield performance and grain plumpness in southern Australia using three doubled haploid (DH) populations developed from crosses between adapted parents that are similar in maturity and overall plant development. Three interconnected genetic populations, Commander x Fleet (CF), Commander x WI4304 (CW), and Fleet x WI4304 (FW) developed from crossing of Australian elite barley genotypes, were used to map QTL controlling yield and grain plumpness. QTL for grain plumpness and yield were analysed using genetic linkage maps made of genotyping-by-sequencing markers and major phenology genes, and field trials at three drought prone environments for two growing seasons. Seventeen QTL were detected for grain plumpness. Eighteen yield QTL explaining from 1.2% to 25.0% of the phenotypic variation were found across populations and environments. Significant QTL x environment interaction was observed for all grain plumpness and yield QTL, except QPlum.FW-4H.1 and QYld.FW-2H.1. Unlike previous yield QTL studies in barley, none of the major developmental genes, including Ppd-H1, Vrn-H1, Vrn-H2 and Vrn-H3, that drive barley adaption significantly affected grain plumpness and yield here. Twenty-two QTL controlled yield or grain plumpness independently of known maturity QTL or genes. Adjustment for maturity effects through co-variance analysis had no major effect on these yield QTL indicating that they control yield per se.

The dynamics of cereal cyst nematode infection differ between susceptible and resistant barley cultivars and lead to changes in (1,3;1,4)-β-glucan levels and HvCslF gene transcript abundance

Heterodera avenae (cereal cyst nematode, CCN) infects the roots of barley (Hordeum vulgare) forming syncytial feeding sites. In resistant host plants, relatively few females develop to maturity. Little is known about the physiological and biochemical changes induced during CCN infection. Responses to CCN infection were investigated in resistant (Rha2) and susceptible barley cultivars through histological, compositional and transcriptional analysis. Two phases were identified that influence CCN viability, including feeding site establishment and subsequent cyst maturation. Syncytial development progressed faster in the resistant cultivar Chebec than in the susceptible cultivar Skiff, and was accompanied by changes in cell wall polysaccharide abundance, particularly (1,3;1,4)-β-glucan. Transcriptional profiling identified several glycosyl transferase genes, including CELLULOSE SYNTHASE-LIKE F10 (HvCslF10), which may contribute to differences in polysaccharide abundance between resistant and susceptible cultivars. In barley, Rha2-mediated CCN resistance drives rapid deterioration of CCN feeding sites, specific changes in cell wall-related transcript abundance and changes in cell wall composition. During H. avenae infection, (1,3;1,4)-β-glucan may influence CCN feeding site development by limiting solute flow, similar to (1,3)-β-glucan during dicot cyst nematode infections. Dynamic transcriptional changes in uncharacterized HvCslF genes, possibly involved in (1,3;1,4)-β-glucan synthesis, suggest a role for these genes in the CCN infection process.

Mapping a major QTL for malt extract of barley from a cross between TX9425 × Naso Nijo

One major QTL-controlling malt extract was identified on 2H, based on the data from four different environments and a large number of DH lines, determining 48% of phenotypic variation. This QTL is of a high value for marker-assisted selection. Improving malting quality traits is one of the major breeding objectives for barley breeding programmes. Among different quality traits, malt extract is one of the most important, determining the yield of beer production. The use of molecular markers linked to loci affecting the quality traits can greatly improve selection efficiency. However, the discovery of closely linked markers relies on not only the availability of the loci, but the accuracy of phenotyping. In this experiment, 188 doubled-haploid lines derived from the cross between a Japanese malting barley and a Chinese feed barley were grown in four different environments (two sites × 2 years). Different quality traits were determined and used to map QTL for these traits. Several QTLs were identified for different quality traits. One major QTL-controlling malt extract was identified on 2H and determined 48% of phenotypic variation with the closest marker of GBM1121. This QTL was consistently expressed in all four environments and is of a high value for marker-assisted selection in malting barley breeding.

Detection and verification of malting quality QTLs using wild barley introgression lines

A malting quality quantitative trait locus (QTL) study was conducted using a set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs). Each S42IL harbors a single marker-defined chromosomal segment from the wild barley accession 'ISR 42-8' (Hordeum vulgare ssp. spontaneum) within the genetic background of the elite spring barley cultivar 'Scarlett' (Hordeum vulgare ssp. vulgare). The aim of the study was (1) to verify genetic effects previously identified in the advanced backcross population S42, (2) to detect new QTLs, and (3) to identify S42ILs exhibiting multiple QTL effects. For this, grain samples from field tests in three different environments were subjected to micro malting. Subsequently, a line x phenotype association study was performed with the S42ILs in order to localize putative QTL effects. A QTL was accepted if the trait value of a particular S42IL was significantly (P < 0.05) different from the recurrent parent as a control, either across all tested environments or in a particular environment. For eight malting quality traits, altogether 40 QTLs were localized, among which 35 QTLs (87.5%) were stable across all environments. Six QTLs (15.0%) revealed a trait improving wild barley effect. Out of 36 QTLs detected in a previous advanced backcross QTL study with the parent BC(2)DH population S42, 18 QTLs (50.0%) could be verified with the S42IL set. For the quality parameters alpha-amylase activity and Hartong 45 degrees C, all QTLs assessed in population S42 were verified by S42ILs. In addition, eight new QTL effects and 17 QTLs affecting two newly investigated traits were localized. Two QTL clusters harboring simultaneous effects on eight and six traits, respectively, were mapped to chromosomes 1H and 4H. In future, fine-mapping of these QTL regions will be conducted in order to shed further light on the genetic basis of the most interesting QTLs.

Seed dormancy in barley: identifying superior genotypes through incorporating epistatic interactions

A genetic linkage map of barley with 128 molecular markers was constructed using a doubled haploid (DH) mapping population derived from a cross between barley (Hordeum vulgare) cvv. Stirling and Harrington. Quantitative trait loci controlling seed dormancy were characterised in the population. A major quantitative trait locus (QTL) controlling seed dormancy and accounting for over half the phenotypic variation (52.17%) was identified on the distal end of the long arm of chromosome 5H. Minor QTLs were also detected near the centromeric region of 5H and on chromosomes 1H and 3H. These minor QTLs with additive effects accounted for 7.52% of the phenotypic variance measured. Examination of epistatic interactions further detected additional minor QTLs near the centromere of 2H and on the long arm and short arms of 4H. Combinations of parental alleles at the QTL locations in predictive analyses indicated dramatic differences in germination. These results emphasise the potential differences in dormancy that can be achieved through the use of specific gene combinations and highlights the importance of minor genes and the epistatic interactions that occur between them. This study found that the combination of Stirling alleles at the two QTL locations on the 5H chromosome and Harrington alleles at the 1H and 3H QTL locations significantly produced the greatest dormancy. Uncovering gene complexes controlling the trait may enable breeders to produce superior genotypes with the desirable allele combinations necessary for manipulating seed dormancy in barley.

Mapped Ds/T-DNA launch pads for functional genomics in barley

A system for targeted gene tagging and local saturation mutagenesis based on maize transposable elements (Ac/Ds) was developed in barley (Hordeum vulgare L.). We generated large numbers of transgenic barley lines carrying a single copy of the non-autonomous maize Ds element at defined positions in the genome. Independent Ds lines were either generated by activating Ds elements in existing single-copy lines after crossing with AcTPase-expressing plants or by Agrobacterium-mediated transformation. Genomic DNA flanking Ds and T-DNA insertion sites from over 200 independent lines was isolated and sequenced, and was used for a sequence based mapping strategy in a barley reference population. More than 100 independent Ds insertion sites were mapped and can be used as launch pads for future targeted tagging of genes in the vicinity of the insertion sites. Sequence analysis of Ds and T-DNA flanking regions revealed a sevenfold preference of both mutagens for insertion into non-redundant, gene-containing regions of the barley genome. However, whilst transposed Ds elements preferentially inserted adjacent to regions with a high number of predicted and experimentally validated matrix attachment regions (nuclear MARs), this was not the case for T-DNA integration sites. These findings and an observed high transposition frequency from mapped launch pads demonstrate the future potential of gene tagging for functional genomics and gene discovery in barley.

New eSSR and gSSR markers added to Australian barley maps

To enhance genetic maps of barley previously developed in Australia for identifying markers useable in molecular breeding, a new set of simple sequence repeat (SSR) and indel markers was added to the maps. These markers were developed through (i) database mining of barley expressed sequence tag (EST) sequences, (ii) comparative barley-rice genome analysis, and (iii) screening of a genomic library with SSR probes. The primer set selected for this study comprised 216 EST-SSR (eSSR) and 25 genomic SSR (gSSR) markers, which were screened for polymorphism on 4 doubled haploid (DH) or recombinant inbred line (RIL) populations. In total, 81 new markers were added to the maps, with good coverage on all 7 chromosomes, except 6H, which only had 2 new markers added. The marker order of previously published maps was re-evaluated by comparing recombination fractions calculated by 2 methods to discover the best position for each marker. The new SSR markers were then added to the updated maps. Several of these new markers are linked to important barley disease resistance genes such as those for cereal cyst nematode, spot form of net blotch, and leaf scald resistance, and are readily useable for marker-assisted barley breeding. The new maps are available on-line at www.genica.net.au.

The identification of QTLs for adult plant resistance to leaf scald in barley

Barley leaf scald disease, caused by the fungal pathogen Rhynchosporium secalis, can be economically damaging, causing both yield losses and lower quality from reduced grain size. Most genetic studies of scald resistance have concentrated on seedling reactions either because of a lack of access to field screening resources or else because of the more definitive phenotype obtained at the seedling stage. However, understanding the genetics of adult plant resistance (APR) to leaf scald could help to produce more durable resistance to this disease. APR to leaf scald in a Chebec/Harrington population (120 doubled haploid (DH) lines) and a Mundah/Keel population (95 DH lines) was determined at Turretfield, South Australia, in 2004. Two different conditions of scald infection were used for Chebec/Harrington, natural infection and inoculation with 2 known scald isolates, whereas Mundah/Keel was inoculated with 2 known isolates. Quantitative trait loci (QTLs) for scald resistance were identified using a previously published Chebec/Harrington map. Three QTLs (on chromosomes 7HS, 7HL, and 6HS) were identified using the natural infection data and one QTL on chromosome 6HL using the inoculated plant data. Two QTLs were identified on chromosome 3HL and 6HS, respectively, using a partial map of Mundah/Keel. An unmapped Schooner/O’Connor population, consisting of 116 DH lines, was also phenotyped for adult plant resistance to scald using natural infection at Turretfield in 2001. Bulked-segregant analysis was used to identify molecular markers linked to a scald resistance locus in the barley cultivar O’Connor on chromosome 6HS, at the same location as the QTLs identified from Harrington and Keel. Six of the QTLs for APR to leaf scald identified in this study were co-located with previously identified seedling resistance genes.