The complementary aggregation sites of fibrin investigated through examination of polymers of fibrinogen with fragment E

Surface Assembly Configurations and Packing Preferences of Fibrinogen Mediated by the Periodicity and Alignment Control of Block Copolymer Nanodomains

The ability to control the specific adsorption and packing behaviors of biomedically important proteins by effectively guiding their preferred surface adsorption configuration and packing orientation on polymeric surfaces may have utility in many applications such as biomaterials, medical implants, and tissue engineering. Herein, we investigate the distinct adhesion configurations of fibrinogen (Fg) proteins and the different organization behaviors between single Fg molecules that are mediated by the changes in the periodicity and alignment of chemically alternating nanodomains in thin films of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) block copolymer (BCP). Specifically, the adsorption characteristics of individual Fg molecules were unambiguously resolved on four different PS-b-PMMA templates of dsa PS-b-PMMA, sm PS-b-PMMA, com PS-b-PMMA, and PS-r-PMMA. By direct visualization through high resolution imaging, the distinct adsorption and packing configurations of both isolated and interacting Fg molecules were determined as a function of the BCP template-specific nanodomain periodicity, domain alignment (random versus fully aligned), and protein concentration. The three dominant Fg adsorption configurations, SP∥, SP⊥, and TP, were observed and their occurrence ratios were ascertained on each PS-b-PMMA template. During surface packing, the orientation of the protein backbone was largely governed by the periodicity and alignment of the underlying PS-b-PMMA nanodomains whose specific direction was explicitly resolved relative to the polymeric nanodomain axis. The use of PS-b-PMMA with a periodicity much smaller than (and comparable to) the length of Fg led to a Fg scaffold with the protein backbone aligned parallel (and perpendicular) to the nanodomain major axis. In addition, we have successfully created fully Fg-decorated BCP constructs analogous to two-dimensional Fg crystals in which aligned protein molecules are arranged either side-on or end-on, depending on the BCP template. Our results demonstrate that the geometry and orientation of the protein can be effectively guided during Fg self-assembly by controlling the physical dimensions and orientations of the underlying BCP templates. Finally, the biofunctionality of the BCP surface-bound Fg was assessed and the Fg/BCP construct was successfully used in the Ca-P nanoparticle nucleation/growth and microglia cell activation.

Longitudinal orientation of cross-linked polypeptide γ chains in fibrin fibrils

The crosslinking of fibrin γ-polypeptide chains under the influence of the plasma fibrin-stabilizing factor (FXIIIa), which causes their conversion to γ-γ dimers, is the major enzyme reaction of covalent fibrin stabilization. We studied the self-assembly of soluble cross-linked fibrin oligomers. The results of analytical ultracentrifugation as well as elastic and dynamic light scattering showed that the double-stranded fibrin oligomers formed under the influence of moderate concentrations of urea are cross-linked only due to formation of γ-γ dimers, which can dissociate into single-stranded structure when the concentration of urea increases. This fact proves that γ-γ dimers are formed in the end-to-end manner.

Covalent structure of single-stranded fibrin oligomers cross-linked by FXIIIa

FXIIIa-mediated isopeptide γ-γ bonds are produced between γ polypeptide chains of adjacent monomeric fibrin. Despite the use of the different methodological approaches there are apparently conflicting ideas regarding the orientation of γ-γ bonds. To identify the orientation of these bonds a novel approach has been applied. It was based on self-assembly of soluble cross-linked fibrin protofibrils ongoing in the urea solution of moderate concentrations followed by dissociation of protofibrils in the conditions of increasing urea concentration. The oligomers were composed of monomeric desA fibrin molecules created by cleavage of the fibrinopeptides A from fibrinogen molecules with thrombin-like enzyme, reptilase. The results of elastic and dynamic light scattering coupled with analytical ultracentrifugation indicated an emergence of the double-stranded rod-like fibrin protofibrils. For the first time, the protofibrils are proved to exhibit an ability to dissociate under increasing urea concentration to yield single-stranded structures. Since no accumulation of α polymers has been found the covalent structure of soluble single-stranded fibrin oligomers is entirely brought about by γ-γ bonds. The results of this study provide an extra evidence to support the model of the longitudinal γ-γ bonds that form between the γ chains end-to-end within the same strand of a protofibril.

Ozone-induced oxidative modification of fibrinogen: role of the D regions

Native fibrinogen is a key blood plasma protein whose main function is to maintain hemostasis by virtue of producing cross-linked fibrin clots under the influence of thrombin and fibrin-stabilizing factor (FXIIIa). The aim of this study was to investigate mechanisms of impairment of both the molecular structure and the spatial organization of fibrinogen under ozone-induced oxidation. FTIR analysis showed that ozone treatment of the whole fibrinogen molecule results in the growth of hydroxyl, carbonyl, and carboxyl group content. A similar analysis of fibrinogen D and E fragments isolated from the oxidized protein also revealed transformation of distinct important functional groups. In particular, a remarkable decay of N-H groups within the peptide backbone was observed along with a lowering of the content of C-H groups belonging to either the aromatic moieties or the aliphatic chain CH2 and CH3 units. The model experiments performed showed that the rather unexpected decay of the aliphatic CH units might be caused by the action of hydroxyl radicals, these being produced in the water solution from ozone. The observed dissimilarities in the shapes of amide I bands of the fibrinogen D and E fragments before and after ozone treatment are interpreted in terms of feasible local conformational changes affecting the secondary structure of the protein. Taken as a whole, the FTIR data suggests that the terminal D fragments of fibrinogen are markedly more susceptible to the ozone-induced oxidation than the central E fragment. The data on elastic and dynamic light scattering provide evidence that, in the presence of FXIIIa, both the unoxidized and the oxidized fibrinogen molecules bind to one another in an "end-to-end" fashion to form the flexible covalently cross-linked fibrinogen homopolymers. The γ and α polypeptide chains of the oxidized fibrinogen proved to be involved in the enzymatic cross-linking more readily than those of unaffected fibrinogen. The experimental data on fibrinogen oxidation acquired in the present study, combined with our earlier findings, make it reasonable to suppose that the spatial structure of fibrinogen could be evolutionarily adapted to some reactive oxygen species actions detrimental to the protein function.

Substrates of Factor XIII-A: roles in thrombosis and wound healing

FXIII (Factor XIII) is a Ca2+-dependent enzyme which forms covalent ϵ-(γ-glutamyl)lysine cross-links between the γ-carboxy-amine group of a glutamine residue and the ϵ-amino group of a lysine residue. FXIII was originally identified as a protein involved in fibrin clot stabilization; however, additional extracellular and intracellular roles for FXIII have been identified which influence thrombus resolution and tissue repair. The present review discusses the substrates of FXIIIa (activated FXIII) involved in thrombosis and wound healing with a particular focus on: (i) the influence of plasma FXIIIa on the formation of stable fibrin clots able to withstand mechanical and enzymatic breakdown through fibrin–fibrin cross-linking and cross-linking of fibrinolysis inhibitors, in particular α2-antiplasmin; (ii) the role of intracellular FXIIIa in clot retraction through cross-linking of platelet cytoskeleton proteins, including actin, myosin, filamin and vinculin; (iii) the role of intracellular FXIIIa in cross-linking the cytoplasmic tails of monocyte AT1Rs (angiotensin type 1 receptors) and potential effects on the development of atherosclerosis; and (iv) the role of FXIIIa on matrix deposition and tissue repair, including cross-linking of extracellular matrix proteins, such as fibronectin, collagen and von Willebrand factor, and the effects on matrix deposition and cell–matrix interactions. The review highlights the central role of FXIIIa in the regulation of thrombus stability, thrombus regulation, cell–matrix interactions and wound healing, which is supported by observations in FXIII-deficient humans and animals.

[Molecular mechanisms of the polymerization of fibrin and the formation of its three-dimensional network]

The results of biochemical, immunochemical, and X-ray studies of the structures of fibrinogen and fibrin molecules were analyzed. The mechanisms of the successive formation of the fibrin three-dimensional network were described: the polymerization of monomeric molecules with the formation of bifilar protofibrils, the lateral association of protofibrils, and the embranchment of the forming fibrils. Data on the electron and confocal microscopy of the polymeric fibrin were considered. The role of the known polymerization centers of fibrin which participated in the formation of protofibrils and their lateral association was discussed. Data on the existence of the previously unknown polymerization centers were given. In particular, the experimental results demonstrated that one of such centers which participated in the formation of protofibrils was located in the Bbeta12-46 fragment, and did not require the cleavage of fibrinopeptide B for its functioning. The results of the computer modeling of the spatial structure of the fibrin(ogen) molecule and the intermolecular interactions in the course of the fibrin polymerization were presented. The location of the alphaC domains in the fibrin(ogen) molecule and their role in the polymerization process were discussed. Information on the structure of the calcium-binding sites of fibrin(ogen) and the functional role of Ca2+ in fibrin polymerization was published. The structure of factor XIII(a) and the mechanisms of fibrin stabilization by this factor were briefly described.

Fibrinogen-β-Estradiol Binding Studied by Fluorescence Spectroscopy: Denaturation and pH Effects

Fibrinogen is a blood plasma protein that plays a crucial role in hemostasis. It is known that erythrocyte aggregation increases in the presence of fibrinogen, and that beta-estradiol decreases erythrocyte aggregation with a constant fibrinogen concentration. In this work, we have used intrinsic tryptophan fluorescence to obtain information on the conformational changes of fibrinogen upon the recently proposed interaction with beta-estradiol. To evaluate the effect on the conformational changes during fibrinogen-beta-estradiol binding, fluorescence experiments were performed using guanidine hydrochloride (0-6 M) as denaturant, at different pH values. The results obtained for pH 6.5 and 8.0 showed no effect during the binding. The main differences were observed between pH 4.2 and 7.4, in the absence and in the presence of two different denaturant concentrations (1 and 5 M). A red shift of the fluorescence emission from 344 to 354 nm is observed when denaturant concentration is above 3 M for all studied pH values. This phenomenon may be explained by the loss of compact structure of the protein in the presence of denaturant, with tryptophan residues exposure to the aqueous environment and alteration of fibrinogen-beta-estradiol binding. These results demonstrate that the binding sites of fibrinogen are strongly dependent on the conformational state of the protein.

The molecular physiology and pathology of fibrin structure/function

The formation of a fibrin clot is a pivotal event in atherothrombotic vascular disease and there is mounting evidence that the structure of clots is of importance in the development of disease. This review describes the crucial events in the formation and dissolution of a clot, with particular focus on genetic and environmental factors that have been identified as determinants of fibrin structure in vivo, and discusses the substantiation of the relationship between fibrin structure and disease in conjunction with a review of the current literature.

Deciphering the physiological pathway of clotting of fibrinogen in blood plasma

I have been fortunate to have benefited over the years from the friendship and advice of John Ferry in our research to decipher the physiological reactions and regulatory events involved in the clotting of fibrinogen in blood. The article is a tribute to the memory of this creative scientist and remarkable individual.

X-ray crystallographic studies on fibrinogen and fibrin

More than a dozen crystal structures of fibrinogen and fibrin fragments have been reported, including a structure of a native fibrinogen. The majority of the other structures are fragments D and d-dimer crystallized in the presence or absence of synthetic peptide ligands patterned on the A and B 'knobs'. Overall, fibrinogens or their fragments from four different species--human, bovine, chicken and lamprey--have been studied so far, with only minor differences in the structures being observed. Although these studies have thrown much light on the details of the fibrinogen to fibrin conversion, much remains to be found out.

Factor XIII: structure, activation, and interactions with fibrinogen and fibrin

Fibrin stabilizing factor (factor XIII or FXIII) plays a critical role in the generation of a viable hemostatic plug. Following exposure to thrombin and calcium, the zymogen is activated to FXIIIa that, in turn, catalyzes the formation of N epsilon(gamma-glutamyl)lysine protein-to-protein side chain bridges within the clot network. Introduction of these covalent crosslinks greatly augments the viscoelastic storage modulus of the structure and its resistance to fibrinolytic enzymes. Analysis of the individual reaction steps and regulatory control mechanisms involved in clot stabilization enabled us to reconstruct the entire physiological process. This also serves as a guide for the differential diagnosis of the variety of molecular defects of fibrin stabilization.

The structure and biological features of fibrinogen and fibrin

Fibrinogen and fibrin play important, overlapping roles in blood clotting, fibrinolysis, cellular and matrix interactions, inflammation, wound healing, and neoplasia. These events are regulated to a large extent by fibrin formation itself and by complementary interactions between specific binding sites on fibrin(ogen) and extrinsic molecules including proenzymes, clotting factors, enzyme inhibitors, and cell receptors. Fibrinogen is comprised of two sets of three polypeptide chains termed A alpha, B beta, and gamma, that are joined by disulfide bridging within the N-terminal E domain. The molecules are elongated 45-nm structures consisting of two outer D domains, each connected to a central E domain by a coiled-coil segment. These domains contain constitutive binding sites that participate in fibrinogen conversion to fibrin, fibrin assembly, crosslinking, and platelet interactions (e.g., thrombin substrate, Da, Db, gamma XL, D:D, alpha C, gamma A chain platelet receptor) as well as sites that are available after fibrinopeptide cleavage (e.g., E domain low affinity non-substrate thrombin binding site); or that become exposed as a consequence of the polymerization process (e.g., tPA-dependent plasminogen activation). A constitutive plasma factor XIII binding site and a high affinity non-substrate thrombin binding site are located on variant gamma' chains that comprise a minor proportion of the gamma chain population. Initiation of fibrin assembly by thrombin-mediated cleavage of fibrinopeptide A from A alpha chains exposes two EA polymerization sites, and subsequent fibrinopeptide B cleavage exposes two EB polymerization sites that can also interact with platelets, fibroblasts, and endothelial cells. Fibrin generation leads to end-to-middle intermolecular Da to EA associations, resulting in linear double-stranded fibrils and equilaterally branched trimolecular fibril junctions. Side-to-side fibril convergence results in bilateral network branches and multistranded thick fiber cables. Concomitantly, factor XIII or thrombin-activated factor XIIIa introduce intermolecular covalent epsilon-(gamma glutamyl)lysine bonds into these polymers, first creating gamma dimers between properly aligned C-terminal gamma XL sites, which are positioned transversely between the two strands of each fibrin fibril. Later, crosslinks form mainly between complementary sites on alpha chains (forming alpha-polymers), and even more slowly among gamma dimers to create higher order crosslinked gamma trimers and tetramers, to complete the mature network structure.

Transglutaminase-catalyzed crosslinking of the Aalpha and gamma constituent chains in fibrinogen

Studies on transglutaminases usually focus on the polymerization of protein substrates by intermolecular N(epsilon)(gamma-glutamyl)lysine bridges, without considering the possibility that the monomeric protein units, themselves, could also become crosslinked internally. Both types of crosslinks are produced in the reaction of fibrinogen with red cell transglutaminase. We isolated the transglutaminase-modified, mostly monomeric form (92-96%) of fibrinogen with a N(epsilon)(gamma-glutamyl)lysine content of approximately 1.6 moles/mole of fibrinogen. The preparation was fully clottable by thrombin, but the rates of release of fibrinopeptides and clotting times were delayed compared with control. Hybrid Aalpha.gamma type of crosslinking, the hallmark of the reaction of the transglutaminase with fibrinogen, occurred by bridging the Aalpha(408-421) chain segment of the protein to that of gamma(392-406). Rotary shadowed electron microscope images showed many monomers to be bent, and the crosslinks seemed to bind the otherwise flexible alphaC domain closer to the backbone of fibrinogen.

Influence of a natural and a synthetic inhibitor of factor XIIIa on fibrin clot rheology

We investigated the origins of greater clot rigidity associated with FXIIIa-dependent cross-linking. Fibrin clots were examined in which cross-linking was controlled through the use of two inhibitors: a highly specific active-center-directed synthetic inhibitor of FXIIIa, 1,3-dimethyl-4,5-diphenyl-2[2(oxopropyl)thio]imidazolium trifluoromethylsulfonate, and a patient-derived immunoglobulin directed mainly against the thrombin-activated catalytic A subunits of thrombin-activated FXIII. Cross-linked fibrin chains were identified and quantified by one- and two-dimensional gel electrophoresis and immunostaining with antibodies specific for the alpha- and gamma-chains of fibrin. Gamma-dimers, gamma-multimers, alpha(n)-polymers, and alpha(p)gamma(q)-hybrids were detected. The synthetic inhibitor was highly effective in preventing the production of all cross-linked species. In contrast, the autoimmune antibody of the patient caused primarily an inhibition of alpha-chain cross-linking. Clot rigidities (storage moduli, G') were measured with a cone and plate rheometer and correlated with the distributions of the various cross-linked species found in the clots. Our findings indicate that the FXIIIa-induced dimeric cross-linking of gamma-chains by itself is not sufficient to stiffen the fibrin networks. Instead, the augmentation of clot rigidity was more strongly correlated with the formation of gamma-multimers, alpha(n)-polymers, and alpha(p)gamma(q)-hybrid cross-links. A mechanism is proposed to explain how these cross-linked species may enhance clot rigidity.

Autoimmune Antibody in a Hemorrhagic Patient Interacts With Thrombin-Activated Factor XIII in a Unique Manner

Without a prior history of hemorrhagic disease, a 62-year-old man suffered recurrent episodes of bleeding. Solubility of the patient’s clot in 5 mol/L urea indicated a problem with fibrin stabilization. The transamidase activity potential of factor XIII, measured by the incorporation of radioactive putrescine into N,N-dimethylcasein as test substrate, was 62% of control, close to the normal range of values. Examination of the patient’s clot from recalcified plasma by sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that essentially none of the  chains and only about two thirds of the γ chains of fibrin became cross-linked under conditions where both were fully cross-linked in the controls. An antibody to factor XIII was isolated which, although recognizing the recombinant rA2subunits, as well as the virgin A2B2 plasma ensemble, showed a 100-fold greater affinity for the thrombin-activated rA2′ and A2′B2 forms of the zymogen, suggesting that the latter would be its main target during coagulation. Furthermore, the patient’s IgG has an ability, never seen before, for inducing an enzymatically active configuration in the thrombin-activated zymogen in the absence of Ca2+.

Autoimmune Antibody in a Hemorrhagic Patient Interacts With Thrombin-Activated Factor XIII in a Unique Manner

Without a prior history of hemorrhagic disease, a 62-year-old man suffered recurrent episodes of bleeding. Solubility of the patient’s clot in 5 mol/L urea indicated a problem with fibrin stabilization. The transamidase activity potential of factor XIII, measured by the incorporation of radioactive putrescine into N,N-dimethylcasein as test substrate, was 62% of control, close to the normal range of values. Examination of the patient’s clot from recalcified plasma by sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that essentially none of the  chains and only about two thirds of the γ chains of fibrin became cross-linked under conditions where both were fully cross-linked in the controls. An antibody to factor XIII was isolated which, although recognizing the recombinant rA2subunits, as well as the virgin A2B2 plasma ensemble, showed a 100-fold greater affinity for the thrombin-activated rA2′ and A2′B2 forms of the zymogen, suggesting that the latter would be its main target during coagulation. Furthermore, the patient’s IgG has an ability, never seen before, for inducing an enzymatically active configuration in the thrombin-activated zymogen in the absence of Ca2+.

Three-dimensional structural studies on fragments of fibrinogen and fibrin

Fibrinogen is a 340 kDa glycoprotein found in the blood plasma of all vertebrates. It is transformed into a fibrin clot by the action of thrombin. Recent X-ray structures of core fragments of both fibrinogen and fibrin have revealed many details about this polymerization event. These include structures of a 30 kDa recombinant gammaC domain, an 86 kDa fragment D from human fibrinogen and a cross-linked double-D fragment from fibrin.

The location of the carboxy-terminal region of gamma chains in fibrinogen and fibrin D domains

Elongated fibrinogen molecules are comprised of two outer "D" domains, each connected through a "coiled-coil" region to the central "E" domain. Fibrin forms following thrombin cleavage in the E domain and then undergoes intermolecular end-to-middle D:E domain associations that result in double-stranded fibrils. Factor XIIIa mediates crosslinking of the C-terminal regions of gamma chains in each D domain (the gammaXL site) by incorporating intermolecular epsilon-(gamma-glutamyl)lysine bonds between amine donor gamma406 lysine of one gamma chain and a glutamine acceptor at gamma398 or gamma399 of another. Several lines of evidence show that crosslinked gamma chains extend "transversely" between the strands of each fibril, but other data suggest instead that crosslinked gamma chains can only traverse end-to-end-aligned D domains within each strand. To examine this issue and determine the location of the gammaXL site in fibrinogen and assembled fibrin fibrils, we incorporated an amine donor, thioacetyl cadaverine, into glutamine acceptor sites in fibrinogen in the presence of XIIIa, and then labeled the thiol with a relatively small (0.8 nm diameter) electron dense gold cluster compound, undecagold monoaminopropyl maleimide (Au11). Fibrinogen was examined by scanning transmission electron microscopy to locate Au11-cadaverine-labeled gamma398/399 D domain sites. Seventy-nine percent of D domain Au11 clusters were situated in middle to proximal positions relative to the end of the molecule, with the remaining Au11 clusters in a distal position. In fibrin fibrils, D domain Au11 clusters were located in middle to proximal positions. These findings show that most C-terminal gamma chains in fibrinogen or fibrin are oriented toward the central domain and indicate that gammaXL sites in fibrils are situated predominantly between strands, suitably aligned for transverse crosslinking.