Biochemical evolution. I. Polymerization On internal, organophilic silica surfaces of dealuminated zeolites and feldspars

Mineral-Mediated Oligoribonucleotide Condensation: Broadening the Scope of Prebiotic Possibilities on the Early Earth

The origin of life on earth requires the synthesis of protobiopolymers in realistic geologic environments along strictly abiotic pathways that rely on inorganic phases (such as minerals) instead of cellular machinery to promote condensation. One such class of polymer central to biochemistry is the polynucleotides, and oligomerization of activated ribonucleotides has been widely studied. Nonetheless, the range of laboratory conditions tested to date is limited and the impact of realistic early Earth conditions on condensation reactions remains unexplored. Here, we investigate the potential for a variety of minerals to enhance oligomerization using ribonucleotide monomers as one example to model condensation under plausible planetary conditions. The results show that several minerals differing in both structure and composition enhance oligomerization. Sulfide minerals yielded oligomers of comparable lengths to those formed in the presence of clays, with galena being the most effective, yielding oligonucleotides up to six bases long. Montmorillonite continues to excel beyond other clays. Chemical pretreatment of the clay was not required, though maximum oligomer lengths decreased from ~11 to 6 bases. These results demonstrate the diversity of mineral phases that can impact condensation reactions and highlight the need for greater consideration of environmental context when assessing prebiotic synthesis and the origin of life.

The Formation of RNA Pre-Polymers in the Presence of Different Prebiotic Mineral Surfaces Studied by Molecular Dynamics Simulations

We used all-atom Molecular Dynamics (MD) computer simulations to study the formation of pre-polymers between the four nucleotides in RNA (AMP, UMP, CMP, GMP) in the presence of different substrates that could have been present in a prebiotic environment. Pre-polymers are C3'-C5' hydrogen-bonded nucleotides that have been suggested to be the precursors of phosphodiester-bonded RNA polymers. We simulated wet-dry cycles by successively removing water molecules from the simulations, from ~60 to 3 water molecules per nucleotide. The nine substrates in this study include three clay minerals, one mica, one phosphate mineral, one silica, and two metal oxides. The substrates differ in their surface charge and ability to form hydrogen bonds with the nucleotides. From the MD simulations, we quantify the interactions between different nucleotides, and between nucleotides and substrates. For comparison, we included graphite as an inert substrate, which is not charged and cannot form hydrogen bonds. We also simulated the dehydration of a nucleotide-only system, which mimics the drying of small droplets. The number of hydrogen bonds between nucleotides and nucleotides and substrates was found to increase significantly when water molecules were removed from the systems. The largest number of C3'-C5' hydrogen bonds between nucleotides occurred in the graphite and nucleotide-only systems. While the surface of the substrates led to an organization and periodic arrangement of the nucleotides, none of the substrates was found to be a catalyst for pre-polymer formation, neither at full hydration, nor when dehydrated. While confinement and dehydration seem to be the main drivers for hydrogen bond formation, substrate interactions reduced the interactions between nucleotides in all cases. Our findings suggest that small supersaturated water droplets that could have been produced by geysers or springs on the primitive Earth may play an important role in non-enzymatic RNA polymerization.

Tracing the Primordial Chemical Life of Glycine: A Review from Quantum Chemical Simulations

Glycine (Gly), NH2CH2COOH, is the simplest amino acid. Although it has not been directly detected in the interstellar gas-phase medium, it has been identified in comets and meteorites, and its synthesis in these environments has been simulated in terrestrial laboratory experiments. Likewise, condensation of Gly to form peptides in scenarios resembling those present in a primordial Earth has been demonstrated experimentally. Thus, Gly is a paradigmatic system for biomolecular building blocks to investigate how they can be synthesized in astrophysical environments, transported and delivered by fragments of asteroids (meteorites, once they land on Earth) and comets (interplanetary dust particles that land on Earth) to the primitive Earth, and there react to form biopolymers as a step towards the emergence of life. Quantum chemical investigations addressing these Gly-related events have been performed, providing fundamental atomic-scale information and quantitative energetic data. However, they are spread in the literature and difficult to harmonize in a consistent way due to different computational chemistry methodologies and model systems. This review aims to collect the work done so far to characterize, at a quantum mechanical level, the chemical life of Gly, i.e., from its synthesis in the interstellar medium up to its polymerization on Earth.

Clays and the Origin of Life: The Experiments

There are three groups of scientists dominating the search for the origin of life: the organic chemists (the Soup), the molecular biologists (RNA world), and the inorganic chemists (metabolism and transient-state metal ions), all of which have experimental adjuncts. It is time for Clays and the Origin of Life to have its experimental adjunct. The clay data coming from Mars and carbonaceous chondrites have necessitated a review of the role that clays played in the origin of life on Earth. The data from Mars have suggested that Fe-clays such as nontronite, ferrous saponites, and several other clays were formed on early Mars when it had sufficient water. This raised the question of the possible role that these clays may have played in the origin of life on Mars. This has put clays front and center in the studies on the origin of life not only on Mars but also here on Earth. One of the major questions is: What was the catalytic role of Fe-clays in the origin and development of metabolism here on Earth? First, there is the recent finding of a chiral amino acid (isovaline) that formed on the surface of a clay mineral on several carbonaceous chondrites. This points to the formation of amino acids on the surface of clay minerals on carbonaceous chondrites from simpler molecules, e.g., CO2, NH3, and HCN. Additionally, there is the catalytic role of small organic molecules, such as dicarboxylic acids and amino acids found on carbonaceous chondrites, in the formation of Fe-clays themselves. Amino acids and nucleotides adsorb on clay surfaces on Earth and subsequently polymerize. All of these observations and more must be subjected to strict experimental analysis. This review provides an overview of what has happened and is now happening in the experimental clay world related to the origin of life. The emphasis is on smectite-group clay minerals, such as montmorillonite and nontronite.

Deadlocks of adenine ribonucleotide synthesis: evaluation of adsorption and condensation reactions in a zeolite micropore space

Herein, we report on adenine, d-ribose, and monophosphate adsorption/co-adsorption into the synthetic analog of the zeolite mineral mordenite followed by drying at 50 °C and thermal activation at 150 °C under an argon atmosphere.

First-Principles Modeling of Protein/Surface Interactions. Polyglycine Secondary Structure Adsorption on the TiO2 (101) Anatase Surface Adopting a Full Periodic Approach

Computational modeling of protein/surface systems is challenging since the conformational variations of the protein and its interactions with the surface need to be considered at once. Adoption of first-principles methods to this purpose is overwhelming and computationally extremely expensive so that, in many cases, dramatically simplified systems (e.g., small peptides or amino acids) are used at the expenses of modeling nonrealistic systems. In this work, we propose a cost-effective strategy for the modeling of peptide/surface interactions at a full quantum mechanical level, taking the adsorption of polyglycine on the TiO₂ (101) anatase surface as a test case. Our approach is based on applying the periodic boundary conditions for both the surface model and the polyglycine peptide, giving rise to full periodic polyglycine/TiO₂ surface systems. By proceeding this way, the considered complexes are modeled with a drastically reduced number of atoms compared with the finite-analogous systems, modeling the polypeptide structures at the same time in a realistic way. Within our modeling approach, full periodic density functional theory calculations (including implicit solvation effects) and ab initio molecular dynamics (AIMD) simulations at the PBE-D2* theory level have been carried out to investigate the adsorption and relative stability of the different polyglycine structures (i.e., extended primary, β-sheet, and α-helix) on the TiO₂ surface. It has been found that, upon adsorption, secondary structures become partially denatured because the peptide C═O groups form Ti-O═C dative bonds. AIMD simulations have been fundamental to identify these phenomena because thermal and entropic effects are of paramount importance. Irrespective of the simulated environments (gas phase and implicit solvent), adsorption of the α-helix is more favorable than that of the β-sheet because in the former, more Ti-O═C bonds are formed and the adsorbed secondary structure results less distorted with respect to the isolated state. Under the implicit water solvent, additionally, adsorbed β-sheet structures weaken with respect to their isolated states as the H-bonds between the strands are longer due to solvation effects. Accordingly, the results indicate that the preferred conformation upon adsorption is the α-helix over the β-sheet.

Amino acid encapsulation in zeolite MOR: Effect of spatial confinement

In this study the absorption of glycine, α-alanine and β-alanine amino acids into the pores of the synthetic zeolite Na-mordenite was investigated with the aim of: (i) evaluating the effectiveness of the MOR framework type in amino acid adsorption (via vapor and aqueous loading); (ii) understanding the host-guest and guest-guest interactions to possibly design a tailor made material and a loading procedure able to maximize the amino acid adsorption; (iii) studying the effect of pressure on the adsorbed amino acids such as, for instance, possible amino acid condensation. The structural characterization, carried out with the combination of diffractometric and infrared spectroscopy analyses, shows that MOR can adsorb amino acids, which are found both in protonated/deprotonated (possibly also generating zwitterions) form. Vapor loading is ineffective for α-alanine, while it is effective in β-alanine and glycine adsorption, even if using different loading degrees. The shape and size of MOR channels make this zeolite suitable to accommodate a peptide. In a glycine loaded sample some molecules condensate to form cyclic dimers, while linear oligomers are detected only in a β-alanine MOR hybrid. The sample loaded with α-L-alanine from aqueous solution does not show the presence of amide bond signals, indicating that the molecules are mostly hosted in zwitterionic form in Na-MOR channels. The application of external baric stimuli does not induce substantial modifications in the structure of the glycine loaded zeolite; this result may be explained by the low number of molecules hosted in the channels. The amino acid amount within the zeolite pores is the most important reactivity parameter and an increased loading could induce chemical modifications.

Water Microdroplets Allow Spontaneously Abiotic Production of Peptides

The chemistry of abiotic synthesis of peptides in the context of their prebiotic origins is a continuing challenge that arises from thermodynamic and kinetic constraints in aqueous media. Here we reported a strategy of microdroplets' mass spectrometry for peptide bonds formed from pure amino acids or a mixture in the presence of phosphoric acids in aqueous microdroplets. In contrast to bulk experiments, the condensation reactions proceed spontaneously under ambient conditions. The microdroplet gave a negative free-energy change (ΔG ∼ -1.1 kcal/mol), and product yields of ∼75% were obtained at the scale of a few milliseconds. Experiments in which nebulization gas pressure and external charge were varied established dependence of peptide production on the droplet size that has a high surface-to-volume ratio. It is concluded that the condensation reactions occurred at or near the air-water interfaces of microdroplets. This aqueous microdroplets approach also provides a route for chemistry synthesis in the prebiotic era.

Prebiotic Peptide Bond Formation Through Amino Acid Phosphorylation. Insights from Quantum Chemical Simulations

Condensation reactions between biomolecular building blocks are the main synthetic channels to build biopolymers. However, under highly diluted prebiotic conditions, condensations are thermodynamically hampered since they release water. Moreover, these reactions are also kinetically hindered as, in the absence of any catalyst, they present high activation energies. In living organisms, in the formation of peptides by condensation of amino acids, this issue is overcome by the participation of adenosine triphosphate (ATP), in which, previous to the condensation, phosphorylation of one of the reactants is carried out to convert it as an activated intermediate. In this work, we present for the first time results based on density functional theory (DFT) calculations on the peptide bond formation between two glycine (Gly) molecules adopting this phosphorylation-based mechanism considering a prebiotic context. Here, ATP has been modeled by a triphosphate (TP) component, and different scenarios have been considered: (i) gas-phase conditions, (ii) in the presence of a Mg²⁺ ion available within the layer of clays, and (iii) in the presence of a Mg²⁺ ion in watery environments. For all of them, the free energy profiles have been fully characterized. Energetics derived from the quantum chemical calculations indicate that none of the processes seem to be feasible in the prebiotic context. In scenarios (i) and (ii), the reactions are inhibited due to unfavorable thermodynamics associated with the formation of high energy intermediates, while in scenario (iii), the reaction is inhibited due to the high free energy barrier associated with the condensation reactions. As a final consideration, the role of clays in this TP-mediated peptide bond formation route is advocated, since the interaction of the phosphorylated intermediate with the internal clay surfaces could well favor the reaction free energies.

Confinement and Time Immemorial: Prebiotic Synthesis of Nucleotides on a Porous Mineral Nanoreactor

We report the successful one-pot synthesis of adenosine mono-, di-, and triphosphate in the confined space of a mordenite zeolite. This is also the first report of ATP synthesized onto a porous mineral surface. The results revealed a plausible prebiotic route to ribonucleotides and highlighted the contribution of microporous minerals in the origins of life.

Role of Mineral Surfaces in Prebiotic Chemical Evolution. In Silico Quantum Mechanical Studies

There is a consensus that the interaction of organic molecules with the surfaces of naturally-occurring minerals might have played a crucial role in chemical evolution and complexification in a prebiotic era. The hurdle of an overly diluted primordial soup occurring in the free ocean may have been overcome by the adsorption and concentration of relevant molecules on the surface of abundant minerals at the sea shore. Specific organic⁻mineral interactions could, at the same time, organize adsorbed molecules in well-defined orientations and activate them toward chemical reactions, bringing to an increase in chemical complexity. As experimental approaches cannot easily provide details at atomic resolution, the role of in silico computer simulations may fill that gap by providing structures and reactive energy profiles at the organic⁻mineral interface regions. Accordingly, numerous computational studies devoted to prebiotic chemical evolution induced by organic⁻mineral interactions have been proposed. The present article aims at reviewing recent in silico works, mainly focusing on prebiotic processes occurring on the mineral surfaces of clays, iron sulfides, titanium dioxide, and silica and silicates simulated through quantum mechanical methods based on the density functional theory (DFT). The DFT is the most accurate way in which chemists may address the behavior of the molecular world through large models mimicking chemical complexity. A perspective on possible future scenarios of research using in silico techniques is finally proposed.

When the Surface Matters: Prebiotic Peptide-Bond Formation on the TiO2 (101) Anatase Surface through Periodic DFT-D2 Simulations

The mechanism of the peptide-bond formation between two glycine (Gly) molecules has been investigated by means of PBE-D2* and PBE0-D2* periodic simulations on the TiO₂ (101) anatase surface. This is a process of great relevance both in fundamental prebiotic chemistry, as the reaction univocally belongs to one of the different organizational events that ultimately led to the emergence of life on Earth, as well as from an industrial perspective, since formation of amides is a key reaction for pharmaceutical companies. The efficiency of the surface catalytic sites is demonstrated by comparing the reactions in the gas phase and on the surface. At variance with the uncatalyzed gas-phase reaction, which involves a concerted nucleophilic attack and dehydration step, on the surface these two steps occur along a stepwise mechanism. The presence of surface Lewis and Brönsted sites exerts some catalytic effect by lowering the free energy barrier for the peptide-bond formation by about 6 kcal mol^-1 compared to the gas-phase reaction. Moreover, the co-presence of molecules acting as proton-transfer assistants (i.e., H₂ O and Gly) provide a more significant kinetic energy barrier decrease. The reaction on the surface is also favorable from a thermodynamic standpoint, involving very large and negative reaction energies. This is due to the fact that the anatase surface also acts as a dehydration agent during the condensation reaction, since the outermost coordinatively unsaturated Ti atoms strongly anchor the released water molecules. Our theoretical results provide a comprehensive atomistic interpretation of the experimental results of Martra et al. (Angew. Chem. Int. Ed. 2014, 53, 4671), in which polyglycine formation was obtained by successive feedings of Gly vapor on TiO₂ surfaces in dry conditions and are, therefore, relevant in a prebiotic context envisaging dry and wet cycles occurring, at mineral surfaces, in a small pool.

Molecular dynamics simulation of potentiometric sensor response: the effect of biomolecules, surface morphology and surface charge

The silica-water interface is critical to many modern technologies in chemical engineering and biosensing. One technology used commonly in biosensors, the potentiometric sensor, operates by measuring the changes in electric potential due to changes in the interfacial electric field. Predictive modelling of this response caused by surface binding of biomolecules remains highly challenging. In this work, through the most extensive molecular dynamics simulation of the silica-water interfacial potential and electric field to date, we report a novel prediction and explanation of the effects of nano-morphology on sensor response. Amorphous silica demonstrated a larger potentiometric response than an equivalent crystalline silica model due to increased sodium adsorption, in agreement with experiments showing improved sensor response with nano-texturing. We provide proof-of-concept that molecular dynamics can be used as a complementary tool for potentiometric biosensor response prediction. Effects that are conventionally neglected, such as surface morphology, water polarisation, biomolecule dynamics and finite-size effects, are explicitly modelled.

Chance, necessity and the origins of life: a physical sciences perspective

Earth's 4.5-billion-year history has witnessed a complex sequence of high-probability chemical and physical processes, as well as 'frozen accidents'. Most models of life's origins similarly invoke a sequence of chemical reactions and molecular self-assemblies in which both necessity and chance play important roles. Recent research adds two important insights into this discussion. First, in the context of chemical reactions, chance versus necessity is an inherently false dichotomy-a range of probabilities exists for many natural events. Second, given the combinatorial richness of early Earth's chemical and physical environments, events in molecular evolution that are unlikely at limited laboratory scales of space and time may, nevertheless, be inevitable on an Earth-like planet at time scales of a billion years.This article is part of the themed issue 'Reconceptualizing the origins of life'.

Toy trains, loaded dice and the origin of life: dimerization on mineral surfaces under periodic drive with Gaussian inputs

In a major extension of previous work, we model the putative hydrothermal rock pore setting for the origin of life on Earth as a series of coupled continuous flow units (the toy train). Perfusing through this train are reactants that set up thermochemical and pH oscillations, and an activated nucleotide that produces monomer and dimer monophosphates. The dynamical equations that model this system are thermally self-consistent. In an innovative step that breaks some new ground, we build stochasticity of the inputs into the model. The computational results infer various constraints and conditions on, and insights into, chemical evolution and the origin of life and its physical setting: long, interconnected porous structures with longitudinal non-uniformity would have been favourable, and the ubiquitous pH dependences of biology may have been established in the prebiotic era. We demonstrate the important role of Gaussian fluctuations of the inputs in driving polymerization, evolution and diversification. In particular, we find that the probability distribution of the resulting output fluctuations is left-skewed and right-weighted (the loaded dice), which could favour chemical evolution towards a living RNA world. We tentatively name this distribution 'Goldilocks'. These results also vindicate the general approach of constructing and running a simple model to learn important new information about a complex system.

Thermal Condensation of Glycine and Alanine on Metal Ferrite Surface: Primitive Peptide Bond Formation Scenario

The amino acid condensation reaction on a heterogeneous mineral surface has been regarded as one of the important pathways for peptide bond formation. Keeping this in view, we have studied the oligomerization of the simple amino acids, glycine and alanine, on nickel ferrite (NiFe₂O₄), cobalt ferrite (CoFe₂O₄), copper ferrite (CuFe₂O₄), zinc ferrite (ZnFe₂O₄), and manganese ferrite (MnFe₂O₄) nanoparticles surfaces, in the temperature range from 50-120 °C for 1-35 days, without applying any wetting/drying cycles. Among the metal ferrites tested for their catalytic activity, NiFe₂O₄ produced the highest yield of products by oligomerizing glycine to the trimer level and alanine to the dimer level, whereas MnFe₂O₄ was the least efficient catalyst, producing the lowest yield of products, as well as shorter oligomers of amino acids under the same set of experimental conditions. It produced primarily diketopiperazine (Ala) with a trace amount of alanine dimer from alanine condensation, while glycine was oligomerized to the dimer level. The trend in product formation is in accordance with the surface area of the minerals used. A temperature as low as 50 °C can even favor peptide bond formation in the present study, which is important in the sense that the condensation process is highly feasible without any sort of localized heat that may originate from volcanoes or hydrothermal vents. However, at a high temperature of 120 °C, anhydrides of glycine and alanine formation are favored, while the optimum temperature for the highest yield of product formation was found to be 90 °C.

Dynamic behaviour of the silica-water-bio electrical double layer in the presence of a divalent electrolyte

Molecular dynamics simulation of the electric double layer at the silica-water-bio interface in mixed electrolyte. Water orientation and charge distribution showed a significant effect on the electrostatics at the interface.

Microbes, Mineral Evolution, and the Rise of Microcontinents-Origin and Coevolution of Life with Early Earth

Earth is the most mineralogically diverse planet in our solar system, the direct consequence of a coevolving geosphere and biosphere. We consider the possibility that a microbial biosphere originated and thrived in the early Hadean-Archean Earth subseafloor environment, with fundamental consequences for the complex evolution and habitability of our planet. In this hypothesis paper, we explore possible venues for the origin of life and the direct consequences of microbially mediated, low-temperature hydrothermal alteration of the early oceanic lithosphere. We hypothesize that subsurface fluid-rock-microbe interactions resulted in more efficient hydration of the early oceanic crust, which in turn promoted bulk melting to produce the first evolved fragments of felsic crust. These evolved magmas most likely included sialic or tonalitic sheets, felsic volcaniclastics, and minor rhyolitic intrusions emplaced in an Iceland-type extensional setting as the earliest microcontinents. With the further development of proto-tectonic processes, these buoyant felsic crustal fragments formed the nucleus of intra-oceanic tonalite-trondhjemite-granitoid (TTG) island arcs. Thus microbes, by facilitating extensive hydrothermal alteration of the earliest oceanic crust through bioalteration, promoted mineral diversification and may have been early architects of surface environments and microcontinents on young Earth. We explore how the possible onset of subseafloor fluid-rock-microbe interactions on early Earth accelerated metavolcanic clay mineral formation, crustal melting, and subsequent metamorphic mineral evolution. We also consider environmental factors supporting this earliest step in geosphere-biosphere coevolution and the implications for habitability and mineral evolution on other rocky planets, such as Mars.

A Prebiotic Chemistry Experiment on the Adsorption of Nucleic Acids Bases onto a Natural Zeolite

There are currently few mechanisms that can explain how nucleic acid bases were synthesized, concentrated from dilute solutions, and/or protected against degradation by UV radiation or hydrolysis on the prebiotic Earth. A natural zeolite exhibited the potential to adsorb adenine, cytosine, thymine, and uracil over a range of pH, with greater adsorption of adenine and cytosine at acidic pH. Adsorption of all nucleic acid bases was decreased in artificial seawater compared to water, likely due to cation complexation. Furthermore, adsorption of adenine appeared to protect natural zeolite from thermal degradation. The C=O groups from thymine, cytosine and uracil appeared to assist the dissolution of the mineral while the NH2 group from adenine had no effect. As shown by FT-IR spectroscopy, adenine interacted with a natural zeolite through the NH2 group, and cytosine through the C=O group. A pseudo-second-order model best described the kinetics of adenine adsorption, which occurred faster in artificial seawaters.

Reactions and surface interactions of saccharides in cement slurries

Glucose, maltodextrin, and sucrose exhibit significant differences in their alkaline reaction properties and interactions in aluminate/silicate cement slurries that result in diverse hydration behaviors of cements. Using 1D solution- and solid-state (13)C nuclear magnetic resonance (NMR), the structures of these closely related saccharides are identified in aqueous cement slurry solutions and as adsorbed on inorganic oxide cement surfaces during the early stages of hydration. Solid-state 1D (29)Si and 2D (27)Al{(1)H} and (13)C{(1)H} NMR techniques, including the use of very high magnetic fields (18.8 T), allow the characterization of the hydrating silicate and aluminate surfaces, where interactions with adsorbed organic species influence hydration. These measurements establish the molecular features of the different saccharides that account for their different adsorption behaviors in hydrating cements. Specifically, sucrose is stable in alkaline cement slurries and exhibits selective adsorption at hydrating silicate surfaces but not at aluminate surfaces in cements. In contrast, glucose degrades into linear saccharinic or other carboxylic acids that adsorb relatively weakly and nonselectively on nonhydrated and hydrated cement particle surfaces. Maltodextrin exhibits intermediate reaction and sorption properties because of its oligomeric glucosidic structure that yields linear carboxylic acids and stable ring-containing degradation products that are similar to those of the glucose degradation products and sucrose, respectively. Such different reaction and adsorption behaviors provide insight into the factors responsible for the large differences in the rates at which aluminate and silicate cement species hydrate in the presence of otherwise closely related saccharides.

Field-Control, Phase-Transitions, and Life's Emergence

Instances of critical-like characteristics in living systems at each organizational level (bio-molecules to ecosystems) as well as the spontaneous emergence of computation (Langton), do suggest the relevance of self-organized criticality (SOC). But extrapolating complex bio-systems to life's origins, brings up a paradox: how could simple organics - lacking the "soft-matter" response properties of today's complex bio-molecules - have dissipated energy from primordial reactions (eventually reducing CO(2)) in a controlled manner for their "ordering"? Nevertheless, a causal link of life's macroscopic irreversible dynamics to the microscopic reversible laws of statistical mechanics is indicated via the "functional-takeover" of a soft magnetic scaffold by organics (c.f. Cairns-Smith's "crystal-scaffold"). A field-controlled structure offers a mechanism for boot-strapping - bottom-up assembly with top-down control: its super-paramagnetic colloidal components obey reversible dynamics, but its dissipation of magnetic (H)-field energy for aggregation breaks time-reversal symmetry. The responsive adjustments of the controlled (host) mineral system to environmental changes would bring about mutual coupling between random organic sets supported by it; here the generation of long-range correlations within organic (guest) networks could include SOC-like mechanisms. And, such cooperative adjustments enable the selection of the functional configuration by altering the inorganic dipolar network's capacity to assist a spontaneous process. A non-equilibrium dynamics could now drive the kinetically oriented system (trimming the phase-space via sterically coupled organics) toward a series of phase-transitions with appropriate organic replacements "taking-over" its functions. Where available, experiments are cited in support of these speculations and for designing appropriate tests.

Mineral-organic interfacial processes: potential roles in the origins of life

Life is believed to have originated on Earth ∼4.4-3.5 Ga ago, via processes in which organic compounds supplied by the environment self-organized, in some geochemical environmental niches, into systems capable of replication with hereditary mutation. This process is generally supposed to have occurred in an aqueous environment and, likely, in the presence of minerals. Mineral surfaces present rich opportunities for heterogeneous catalysis and concentration which may have significantly altered and directed the process of prebiotic organic complexification leading to life. We review here general concepts in prebiotic mineral-organic interfacial processes, as well as recent advances in the study of mineral surface-organic interactions of potential relevance to understanding the origin of life.

Evolutionary selection of enzymatically synthesized semiconductors from biomimetic mineralization vesicles

The way nature evolves and sculpts materials using proteins inspires new approaches to materials engineering but is still not completely understood. Here, we present a cell-free synthetic biological platform to advance studies of biologically synthesized solid-state materials. This platform is capable of simultaneously exerting many of the hierarchical levels of control found in natural biomineralization, including genetic, chemical, spatial, structural, and morphological control, while supporting the evolutionary selection of new mineralizing proteins and the corresponding genetically encoded materials that they produce. DNA-directed protein expression and enzymatic mineralization occur on polystyrene microbeads in water-in-oil emulsions, yielding synthetic surrogates of biomineralizing cells that are then screened by flow sorting, with light-scattering signals used to sort the resulting mineralized composites differentially. We demonstrate the utility of this platform by evolutionarily selecting newly identified silicateins, biomineralizing enzymes previously identified from the silica skeleton of a marine sponge, for enzyme variants capable of synthesizing silicon dioxide (silica) or titanium dioxide (titania) composites. Mineral composites of intermediate strength are preferentially selected to remain intact for identification during cell sorting, and then to collapse postsorting to expose the encoding genes for enzymatic DNA amplification. Some of the newly selected silicatein variants catalyze the formation of crystalline silicates, whereas the parent silicateins lack this ability. The demonstrated bioengineered route to previously undescribed materials introduces in vitro enzyme selection as a viable strategy for mimicking genetic evolution of materials as it occurs in nature.

Chirality, photochemistry and the detection of amino acids in interstellar ice analogues and comets

The primordial appearance of chiral amino acids was an essential component of the asymmetric evolution of life on Earth. In this tutorial review we will explore the original life-generating, symmetry-breaking event and summarise recent thoughts on the origin of enantiomeric excess in the universe. We will then highlight the transfer of asymmetry from chiral photons to racemic amino acids and elucidate current experimental data on the photochemical synthesis of amino and diamino acid structures in simulated interstellar and circumstellar ice environments. The chirality inherent within actual interstellar (cometary) ice environments will be considered in this discussion: in 2014 the Rosetta Lander Philae onboard the Rosetta space probe is planned to detach from the orbiter and soft-land on the surface of the nucleus of comet 67P/Churyumov-Gerasimenko. It is equipped for the in situ enantioselective analysis of chiral prebiotic organic species in cometary ices. The scientific design of this mission will therefore be presented in the context of analysing the formation of amino acid structures within interstellar ice analogues as a means towards furthering understanding of the origin of asymmetric biological molecules.

Energetic selection of topology in ferredoxins

Models of early protein evolution posit the existence of short peptides that bound metals and ions and served as transporters, membranes or catalysts. The Cys-X-X-Cys-X-X-Cys heptapeptide located within bacterial ferredoxins, enclosing an Fe₄S₄ metal center, is an attractive candidate for such an early peptide. Ferredoxins are ancient proteins and the simple α+β fold is found alone or as a domain in larger proteins throughout all three kingdoms of life. Previous analyses of the heptapeptide conformation in experimentally determined ferredoxin structures revealed a pervasive right-handed topology, despite the fact that the Fe₄S₄ cluster is achiral. Conformational enumeration of a model CGGCGGC heptapeptide bound to a cubane iron-sulfur cluster indicates both left-handed and right-handed folds could exist and have comparable stabilities. However, only the natural ferredoxin topology provides a significant network of backbone-to-cluster hydrogen bonds that would stabilize the metal-peptide complex. The optimal peptide configuration (alternating α_L,α_R) is that of an α-sheet, providing an additional mechanism where oligomerization could stabilize the peptide and facilitate iron-sulfur cluster binding.

The ferredoxin fold is one of the oldest structures capable of catalyzing electron transfer reactions. In nature, only a right-handed topology exists in the ferredoxin fold. To understand how a specific fold-handedness was selected, we analyzed the structural motif using the tools of de novo protein design, searching in an unbiased fashion for backbone geometries that can favorably interact with the tetrahedral iron-sulfur cluster. In silico, we found both left-handed and right-handed folds can be formed, however the right-handed folds provide up to six hydrogen bonds that can stabilize the reduced iron-sulfur cluster, whereas left-handed folds at most form three hydrogen bonds. The difference in electrostatic conformational energy may have influenced selection of topology early in the evolution of iron-sulfur cluster containing proteins. This observation led us to establish a fundamental protein design principle that only right-handed peptide folds can properly interact while maintain redox function. Our results provide guidance in the creation of artificial proteins capable of carrying out redox reactions.

Impact of mineral micropores on transport and fate of organic contaminants: a review

Nanometer-scale pores are abundant in porous geological media (soils, sediments, and aquifer materials), and may account for over >90% of total mineral surface areas. Sorption of organic contaminants in mineral micropores (<2 nm) plays a key role in controlling their fate and transport when the porous geological media have very low organic carbon contents (<0.1%). Significant adsorption of hydrophobic organic contaminants could only occur in the hydrophobic micropore spaces because of the strong competition from water. The rate of desorption from micropores is very slow due to hindered diffusion, resulting in distinct two-stage desorption behavior for microporous solids. Size exclusion effect prevents micropore-sorbed contaminants from being accessed by microorganisms and their extracellular enzymes, thus reducing their bioavailability and biodegradation rates. Results from recent studies indicate that sorption in micropores can also inhibit abiotic degradation of reactive contaminants by protecting them in confined spaces with little reactive water, slowing down hydrolysis and other water-mediated transformations. As a result of the inhibitory effect on abiotic and biotic transformations, and the slow desorption due to hindered diffusion, sorption in hydrophobic micropores of porous geological media can cause preservation of anthropogenic organic contaminants in the subsurface and may increase their persistence to the time scale of geological ages under appropriate conditions. From a practical perspective, understanding the role of mineral micropores is important in assessing the long-term ecotoxicological risk of organic contaminants in the subsurface and designing remediation strategies.

Adsorption of adenine and thymine on zeolites: FT-IR and EPR spectroscopy and X-ray diffractometry and SEM studies

The interactions of adenine and thymine with and adsorption on zeolites were studied using different techniques. There were two main findings. First, as shown by X-ray diffractometry, thymine increased the decomposition of the zeolites (Y, ZSM-5) while adenine prevented it. Second, zeolite Y adsorbed almost the same amount of adenine and thymine, thus both nucleic acid bases could be protected from hydrolysis and UV radiation and could be available for molecular evolution. The X-ray diffractometry and SEM showed that artificial seawater almost dissolved zeolite A. The adsorption of adenine on ZSM-5 zeolite was higher than that of thymine (Student-Newman-Keuls test-SNK p<0.05). Adenine was also more greatly adsorbed on ZSM-5 zeolite, when compared to other zeolites (SNK p<0.05). However the adsorption of thymine on different zeolites was not statistically different (SNK p>0.05). The adsorption of adenine and thymine on zeolites did not depend on pore size or Si/Al ratio and it was not explained only by electrostatic forces; rather van der Waals interactions should also be considered.

Oligomerization of glycine and alanine catalyzed by iron oxides: implications for prebiotic chemistry

Iron oxide minerals are probable constituents of the sediments present in geothermal regions of the primitive earth. They might have adsorbed different organic monomers (amino acids, nucleotides etc.) and catalyzed polymerization processes leading to the formation of the first living cell. In the present work we tested the catalytic activity of three forms of iron oxides (Goethite, Akaganeite and Hematite) in the intermolecular condensation of each of the amino acids glycine and L-alanine. The effect of zinc oxide and titanium dioxide on the oligomerization has also been studied. Oligomerization studies were performed for 35 days at three different temperatures 50, 90 and 120°C without applying drying/wetting cycling. The products formed were characterized by HPLC and ESI-MS techniques. All three forms of iron oxides catalyzed peptide bond formation (23.2% of gly2 and 10.65% of ala2). The reaction was monitored every 7 days. Formation of peptides was observed to start after 7 days at 50°C. Maximum yield of peptides was found after 35 days at 90°C. Reaction at 120°C favors formation of diketopiperazine derivatives. It is also important to note that after 35 days of reaction, goethite produced dimer and trimer with the highest yield among the oxides tested. We suggest that the activity of goethite could probably be due to its high surface area and surface acidity.

Adsorption of ribose nucleotides on manganese oxides with varied mn/o ratio: implications for chemical evolution

Manganese exists in different oxidation states under different environmental conditions with respect to redox potential. Various forms of manganese oxides, namely, Manganosite (MnO), Bixbyite (Mn(2)O(3)), Hausmannite (Mn(3)O(4)) and Pyrolusite (MnO(2)) were synthesized and their possible role in chemical evolution studied. Adsorption studies of ribose nucleotides (5'-AMP, 5'-GMP, 5'-CMP and 5'-UMP) on these manganese oxides at neutral pH, revealed a higher binding affinity to manganosite (MnO) compared to the other manganese oxides. That manganese oxides having a lower Mn-O ratio show higher binding affinity for the ribonucleotides indirectly implies that such oxides may have provided a surface onto which biomonomers could have been concentrated through selective adsorption. Purine nucleotides were adsorbed to a greater extent compared to the pyrimidine nucleotides. Adsorption data followed Langmuir adsorption isotherms, and X( m ) and K( L ) values were calculated. The nature of the interaction and mechanism was elucidated by infrared spectral studies conducted on the metal-oxide and ribonucleotide-metal-oxide adducts.

Pumice as a remarkable substrate for the origin of life

The context for the emergence of life on Earth sometime prior to 3.5 billion years ago is almost as big a puzzle as the definition of life itself. Hitherto, the problem has largely been addressed in terms of theoretical and experimental chemistry plus evidence from extremophile habitats like modern hydrothermal vents and meteorite impact structures. Here, we argue that extensive rafts of glassy, porous, and gas-rich pumice could have had a significant role in the origin of life and provided an important habitat for the earliest communities of microorganisms. This is because pumice has four remarkable properties. First, during eruption it develops the highest surface-area-to-volume ratio known for any rock type. Second, it is the only known rock type that floats as rafts at the air-water interface and then becomes beached in the tidal zone for long periods of time. Third, it is exposed to an unusually wide variety of conditions, including dehydration. Finally, from rafting to burial, it has a remarkable ability to adsorb metals, organics, and phosphates as well as to host organic catalysts such as zeolites and titanium oxides. These remarkable properties now deserve to be rigorously explored in the laboratory and the early rock record.

Adsorption of amino acids (ALA, CYS, HIS, MET) on zeolites: fourier transform infrared and Raman spectroscopy investigations

Minerals adsorb more amino acids with charged R-groups than amino acids with uncharged R-groups. Thus, the peptides that form from the condensation of amino acids on the surface of minerals should be composed of amino acid residues that are more charged than uncharged. However, most of the amino acids (74%) in today's proteins have an uncharged R-group. One mechanism with which to solve this paradox is the use of organophilic minerals such as zeolites. Over the range of pH (pH 2.66-4.50) used in these experiments, the R-group of histidine (His) is positively charged and neutral for alanine (Ala), cysteine (Cys), and methionine (Met). In acidic hydrothermal environments, the pH could be even lower than those used in this study. For the pH range studied, the zeolites were negatively charged, and the overall charge of all amino acids was positive. The conditions used here approximate those of prebiotic Earth. The most important finding of this work is that the relative concentrations of each amino acid (X=His, Met, Cys) to alanine (X/Ala) are close to 1.00. This is an important result with regard to prebiotic chemistry because it could be a solution for the paradox stated above. Pore size did not affect the adsorption of Cys and Met on zeolites, and the Si/Al ratio did not affect the adsorption of Cys, His, and Met. ZSM-5 could be used for the purification of Cys from other amino acids (Student-Newman-Keuls test, p<0.05), and mordenite could be used for separation of amino acids from each other (Student-Newman-Keuls test, p<0.05). As shown by Fourier transform infrared (FT-IR) spectra, Ala interacts with zeolites through the [Formula: see text] group, and methionine-zeolite interactions involve the COO, [Formula: see text], and CH(3) groups. FT-IR spectra show that the interaction between the zeolites and His is weak. Cys showed higher adsorption on all zeolites; however, the hydrophobic Van der Waals interaction between zeolites and Cys is too weak to produce any structural changes in the Cys groups (amine, carboxylic, sulfhydryl, etc.); thus, the FT-IR and Raman spectra are the same as those of solid Cys.

Origins of saccharide-dependent hydration at aluminate, silicate, and aluminosilicate surfaces

Sugar molecules adsorbed at hydrated inorganic oxide surfaces occur ubiquitously in nature and in technologically important materials and processes, including marine biomineralization, cement hydration, corrosion inhibition, bioadhesion, and bone resorption. Among these examples, surprisingly diverse hydration behaviors are observed for oxides in the presence of saccharides with closely related compositions and structures. Glucose, sucrose, and maltodextrin, for example, exhibit significant differences in their adsorption selectivities and alkaline reaction properties on hydrating aluminate, silicate, and aluminosilicate surfaces that are shown to be due to the molecular architectures of the saccharides. Solid-state (1)H, (13)C, (29)Si, and (27)Al nuclear magnetic resonance (NMR) spectroscopy measurements, including at very high magnetic fields (19 T), distinguish and quantify the different molecular species, their chemical transformations, and their site-specific adsorption on different aluminate and silicate moieties. Two-dimensional NMR results establish nonselective adsorption of glucose degradation products containing carboxylic acids on both hydrated silicates and aluminates. In contrast, sucrose adsorbs intact at hydrated silicate sites and selectively at anhydrous, but not hydrated, aluminate moieties. Quantitative surface force measurements establish that sucrose adsorbs strongly as multilayers on hydrated aluminosilicate surfaces. The molecular structures and physicochemical properties of the saccharides and their degradation species correlate well with their adsorption behaviors. The results explain the dramatically different effects that small amounts of different types of sugars have on the rates at which aluminate, silicate, and aluminosilicate species hydrate, with important implications for diverse materials and applications.

Adsorption of thymine and uracil on 1:1 clay mineral surfaces: comprehensive ab initio study on influence of sodium cation and water

This computational study performed using the density functional theory shows that hydrated and non-hydrated tetrahedral and octahedral kaolinite mineral surfaces in the presence of a cation adsorb the nucleic acid bases thymine and uracil well. Differences in the structure and chemistry of specific clay mineral surfaces led to a variety of DNA bases adsorption mechanisms. The energetically most predisposed positions for an adsorbate molecule on the mineral surface were revealed. The target molecule binding with the surface can be characterized as physisorption, which occurs mainly due to a cation-molecular oxygen interaction, with hydrogen bonds providing an additional stabilization. The adsorption strength is proportional to the number of intermolecular interactions formed between the target molecule and the surface. From the Atoms in Molecules analysis and comparison of binding energy values of studied systems it is concluded that the sorption activity of kaolinite minerals for thymine and uracil depends on various factors, among which are the structure and accessibility of the organic compounds. The adsorption is governed mostly by the surface type, its properties and presence of cation, which cause a selective binding of the nucleobase. Adsorbate stabilization on the mineral surface increases only slightly with explicit addition of water. Comparison of activity of different studied kaolinite mineral models reveals the following order for stabilization: octahedral-Na-water > octahedral-Na > tetrahedral-Na > tetrahedral-Na-water. Further investigation of the electrostatic potentials helps understanding of the adsorption process and confirmation of the active sites on the kaolinite mineral surfaces. Based on the conclusions that clay mineral affinity for DNA and RNA bases can vary due to different structural and chemical properties of the surface, a hypothesis on possible role of clays in the origin of life was made.

Possible origin of life between mica sheets

The mica hypothesis is a new hypothesis about how life might have originated. The mica hypothesis provides simple solutions to many basic questions about the origins of life. In the mica hypothesis, the spaces between mica sheets functioned as the earliest cells. These 'cells' between mica sheets are filled with potassium ions, and they provide an environment in which: polymer entropy is low; cyclic wetting and drying can occur; molecules can evolve in isolated spaces and also migrate and ligate to form larger molecules. The mica hypothesis also proposes that mechanical energy (work) is a major energy source that could have been used on many length scales to form covalent bonds, to alter polymer conformations, and to bleb daughter cells off protocells. The mica hypothesis is consistent with many other origins hypotheses, including the RNA, lipid, and metabolic 'worlds'. Therefore the mica hypothesis has the potential to unify origins hypotheses, such that different molecular components and systems could simultaneously evolve in the spaces between mica sheets.

Mineral surfaces, geochemical complexities, and the origins of life

Crystalline surfaces of common rock-forming minerals are likely to have played several important roles in life's geochemical origins. Transition metal sulfides and oxides promote a variety of organic reactions, including nitrogen reduction, hydroformylation, amination, and Fischer-Tropsch-type synthesis. Fine-grained clay minerals and hydroxides facilitate lipid self-organization and condensation polymerization reactions, notably of RNA monomers. Surfaces of common rock-forming oxides, silicates, and carbonates select and concentrate specific amino acids, sugars, and other molecular species, while potentially enhancing their thermal stabilities. Chiral surfaces of these minerals also have been shown to separate left- and right-handed molecules. Thus, mineral surfaces may have contributed centrally to the linked prebiotic problems of containment and organization by promoting the transition from a dilute prebiotic "soup" to highly ordered local domains of key biomolecules.

Formation versus hydrolysis of the peptide bond from a quantum-mechanical viewpoint: The role of mineral surfaces and implications for the origin of life

The condensation (polymerization by water elimination) of molecular building blocks to yield the first active biopolymers (e.g. of amino acids to form peptides) during primitive Earth is an intriguing question that nowadays still remains open since these processes are thermodynamically disfavoured in highly dilute water solutions. In the present contribution, formation and hydrolysis of glycine oligopeptides occurring on a cluster model of sanidine feldspar (001) surface have been simulated by quantum mechanical methods. Results indicate that the catalytic interplay between Lewis and Brønsted sites both present at the sanidine surface, in cooperation with the London forces acting between the biomolecules and the inorganic surface, plays a crucial role to: i) favour the condensation of glycine to yield oligopeptides as reaction products; ii) inhibit the hydrolysis of the newly formed oligopeptides. Both facts suggest that mineral surfaces may have helped in catalyzing, stabilizing and protecting from hydration the oligopeptides formed in the prebiotic era.

Adsorption and polymerization of amino acids on mineral surfaces: a review

The present paper offers a review of recent (post-1980) work on amino acid adsorption and thermal reactivity on oxide and sulfide minerals. This review is performed in the general frame of evaluating Bernal's hypothesis of prebiotic polymerization in the adsorbed state, but written from a surface scientist's point of view. After a general discussion of the thermodynamics of the problem and exactly what effects surfaces should have to make adsorbed-state polymerization a viable scenario, we examine some practical difficulties in experimental design and their bearing on the conclusions that can be drawn from extant works, including the relevance of the various available characterization techniques. We then present the state of the art concerning the mechanisms of the interactions of amino acids with mineral surfaces, including results from prebiotic chemistry-oriented studies, but also from several different fields of application, and discuss the likely consequences for adsorption selectivities. Finally, we briefly summarize the data concerning thermally activated amide bond formation of adsorbed amino acids without activating agents. The reality of the phenomenon is established beyond any doubt, but our understanding of its mechanism and therefore of its prebiotic potential is very fragmentary. The review concludes with a discussion of future work needed to fill the most conspicuous gaps in our knowledge of amino acids/mineral surfaces systems and their reactivity.

The rate of 2,2-dichloropropane transformation in mineral micropores: implications of sorptive preservation for fate and transport of organic contaminants in the subsurface

Nanometer scale pores are ubiquitous in porous geologic media (soils and sediments). Sorption of organic contaminants in micropores (< or = 2 nm) can inhibittheir hydrolytic transformation due to the limited availability of reactive water within hydrophobic micropore spaces. As a test case, we studied the dehydrohalogenation of 2,2-dichloropropane (2,2-DCP) sorbed in the micropores of several model mineral solids. In the micropores of a hydrophobic dealuminated Y zeolite, CBV-780, 2,2-DCP dehydrohalogenation proceeded significantly slower than in bulk aqueous solution and eventually stopped. This was attributed to the depletion of reactive water molecules in the micropore spaces. The 2,2-DCP sorbed in the micropores of more hydrophilic solids (aquifer sediment, aquifer sand, and silica gel) also transformed slower than in aqueous solution, and the reaction no longer followed first-order kinetics. Results of transport modeling support that reactive contaminants sorbed in microporous minerals can be preserved over geological time scales under conditions that limit desorption. This study shows that hydrophobic micropores in geological media may act as an important sink for anthropogenic organic contaminants in the subsurface, and that sorption in micropores may significantly increase the persistence of the sorbed contaminants.