Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. V. Four different polymerase-clamp complexes on DNA

Generation and Repair of Postreplication Gaps in Escherichia coli

When replication forks encounter template lesions, one result is lesion skipping, where the stalled DNA polymerase transiently stalls, disengages, and then reinitiates downstream to leave the lesion behind in a postreplication gap. Despite considerable attention in the 6 decades since postreplication gaps were discovered, the mechanisms by which postreplication gaps are generated and repaired remain highly enigmatic. This review focuses on postreplication gap generation and repair in the bacterium Escherichia coli. New information to address the frequency and mechanism of gap generation and new mechanisms for their resolution are described. There are a few instances where the formation of postreplication gaps appears to be programmed into particular genomic locations, where they are triggered by novel genomic elements.

A simplified method for reconstituting active E. coli DNA polymerase III

Genome duplication in E. coli is carried out by DNA polymerase III, an enzyme complex consisting of ten subunits. Investigations of the biochemical and structural properties of DNA polymerase III require the expression and purification of subunits including α, ge, θ, γ, δ', δ, and β separately followed by in vitro reconstitution of the pol III core and clamp loader. Here we propose a new method for expressing and purifying DNA polymerase III components by utilizing a protein co-expression strategy. Our results show that the subunits of the pol III core and those of the clamp loader can be coexpressed and purified based on inherent interactions between the subunits. The resulting pol III core, clamp loader and sliding clamp can be reconstituted effectively to perform DNA polymerization. Our strategy considerably simplifies the expression and purification of DNA polymerase III and provides a feasible and convenient method for exploring other multi-subunit systems.

Mechanism of polymerase collision release from sliding clamps on the lagging strand

Replicative polymerases are tethered to DNA by sliding clamps for processive DNA synthesis. Despite attachment to a sliding clamp, the polymerase on the lagging strand must cycle on and off DNA for each Okazaki fragment. In the 'collision release' model, the lagging strand polymerase collides with the 5' terminus of an earlier completed fragment, which triggers it to release from DNA and from the clamp. This report examines the mechanism of collision release by the Escherichia coli Pol III polymerase. We find that collision with a 5' terminus does not trigger polymerase release. Instead, the loss of ssDNA on filling in a fragment triggers polymerase to release from the clamp and DNA. Two ssDNA-binding elements are involved, the tau subunit of the clamp loader complex and an OB domain within the DNA polymerase itself. The tau subunit acts as a switch to enhance polymerase binding at a primed site but not at a nick. The OB domain acts as a sensor that regulates the affinity of Pol III to the clamp in the presence of ssDNA.

Coordinating DNA polymerase traffic during high and low fidelity synthesis

With the discovery that organisms possess multiple DNA polymerases (Pols) displaying different fidelities, processivities, and activities came the realization that mechanisms must exist to manage the actions of these diverse enzymes to prevent gratuitous mutations. Although many of the Pols encoded by most organisms are largely accurate, and participate in DNA replication and DNA repair, a sizeable fraction display a reduced fidelity, and act to catalyze potentially error-prone translesion DNA synthesis (TLS) past lesions that persist in the DNA. Striking the proper balance between use of these different enzymes during DNA replication, DNA repair, and TLS is essential for ensuring accurate duplication of the cell's genome. This review highlights mechanisms that organisms utilize to manage the actions of their different Pols. A particular emphasis is placed on discussion of current models for how different Pols switch places with each other at the replication fork during high fidelity replication and potentially error-pone TLS.

Role of accessory DNA polymerases in DNA replication in Escherichia coli: analysis of the dnaX36 mutator mutant

The dnaX36(TS) mutant of Escherichia coli confers a distinct mutator phenotype characterized by enhancement of transversion base substitutions and certain (-1) frameshift mutations. Here, we have further investigated the possible mechanism(s) underlying this mutator effect, focusing in particular on the role of the various E. coli DNA polymerases. The dnaX gene encodes the tau subunit of DNA polymerase III (Pol III) holoenzyme, the enzyme responsible for replication of the bacterial chromosome. The dnaX36 defect resides in the C-terminal domain V of tau, essential for interaction of tau with the alpha (polymerase) subunit, suggesting that the mutator phenotype is caused by an impaired or altered alpha-tau interaction. We previously proposed that the mutator activity results from aberrant processing of terminal mismatches created by Pol III insertion errors. The present results, including lack of interaction of dnaX36 with mutM, mutY, and recA defects, support our assumption that dnaX36-mediated mutations originate as errors of replication rather than DNA damage-related events. Second, an important role is described for DNA Pol II and Pol IV in preventing and producing, respectively, the mutations. In the system used, a high fraction of the mutations is dependent on the action of Pol IV in a (dinB) gene dosage-dependent manner. However, an even larger but opposing role is deduced for Pol II, revealing Pol II to be a major editor of Pol III mediated replication errors. Overall, the results provide insight into the interplay of the various DNA polymerases, and of tau subunit, in securing a high fidelity of replication.

Statistically inferring protein-protein associations with affinity isolation LC-MS/MS assays

Affinity isolation of protein complexes followed by protein identification by LC-MS/MS is an increasingly popular approach for mapping protein interactions. However, systematic and random assay errors from multiple sources must be considered to confidently infer authentic protein-protein interactions. To address this issue, we developed a general, robust statistical method for inferring authentic interactions from protein prey-by-bait frequency tables using a binomial-based likelihood ratio test (LRT) coupled with Bayes' Odds estimation. We then applied our LRT-Bayes' algorithm experimentally using data from protein complexes isolated from Rhodopseudomonas palustris. Our algorithm, in conjunction with the experimental protocol, inferred with high confidence authentic interacting proteins from abundant, stable complexes, but few or no authentic interactions for lower-abundance complexes. The algorithm can discriminate against a background of prey proteins that are detected in association with a large number of baits as an artifact of the measurement. We conclude that the experimental protocol including the LRT-Bayes' algorithm produces results with high confidence but moderate sensitivity. We also found that Monte Carlo simulation is a feasible tool for checking modeling assumptions, estimating parameters, and evaluating the significance of results in protein association studies.

The unstructured C-terminus of the tau subunit of Escherichia coli DNA polymerase III holoenzyme is the site of interaction with the alpha subunit

The τ subunit of Escherichia coli DNA polymerase III holoenzyme interacts with the α subunit through its C-terminal Domain V, τ_C16. We show that the extreme C-terminal region of τ_C16 constitutes the site of interaction with α. The τ_C16 domain, but not a derivative of it with a C-terminal deletion of seven residues (τ_C16Δ7), forms an isolable complex with α. Surface plasmon resonance measurements were used to determine the dissociation constant (K_D) of the α−τ_C16 complex to be ∼260 pM. Competition with immobilized τ_C16 by τ_C16 derivatives for binding to α gave values of K_D of 7 μM for the α−τ_C16Δ7 complex. Low-level expression of the genes encoding τ_C16 and τ_C16▵7, but not τ_C16Δ11, is lethal to E. coli. Suppression of this lethal phenotype enabled selection of mutations in the 3′ end of the τ_C16 gene, that led to defects in α binding. The data suggest that the unstructured C-terminus of τ becomes folded into a helix–loop–helix in its complex with α. An N-terminally extended construct, τ_C24, was found to bind DNA in a salt-sensitive manner while no binding was observed for τ_C16, suggesting that the processivity switch of the replisome functionally involves Domain IV of τ.

Mutator mutants of Escherichia coli carrying a defect in the DNA polymerase III tau subunit

To investigate the possible role of accessory subunits of Escherichia coli DNA polymerase III holoenzyme (HE) in determining chromosomal replication fidelity, we have investigated the role of the dnaX gene. This gene encodes both the tau and gamma subunits of HE, which play a central role in the organization and functioning of HE at the replication fork. We find that a classical, temperature-sensitive dnaX allele, dnaX36, displays a pronounced mutator effect, characterized by an unusual specificity: preferential enhancement of transversions and -1 frameshifts. The latter occur predominantly at non-run sequences. The dnaX36 defect does not affect the gamma subunit, but produces a tau subunit carrying a missense substitution (E601K) in its C-terminal domain (domain V) that is involved in interaction with the Pol III alpha subunit. A search for new mutators in the dnaX region of the chromosome yielded six additional dnaX mutators, all carrying a specific tau subunit defect. The new mutators displayed phenotypes similar to dnaX36: strong enhancement of transversions and frameshifts and only weak enhancement for transitions. The combined findings suggest that the tau subunit of HE plays an important role in determining the fidelity of the chromosomal replication, specifically in the avoidance of transversions and frameshift mutations.

Interaction network containing conserved and essential protein complexes in Escherichia coli

Proteins often function as components of multi-subunit complexes. Despite its long history as a model organism, no large-scale analysis of protein complexes in Escherichia coli has yet been reported. To this end, we have targeted DNA cassettes into the E. coli chromosome to create carboxy-terminal, affinity-tagged alleles of 1,000 open reading frames (approximately 23% of the genome). A total of 857 proteins, including 198 of the most highly conserved, soluble non-ribosomal proteins essential in at least one bacterial species, were tagged successfully, whereas 648 could be purified to homogeneity and their interacting protein partners identified by mass spectrometry. An interaction network of protein complexes involved in diverse biological processes was uncovered and validated by sequential rounds of tagging and purification. This network includes many new interactions as well as interactions predicted based solely on genomic inference or limited phenotypic data. This study provides insight into the function of previously uncharacterized bacterial proteins and the overall topology of a microbial interaction network, the core components of which are broadly conserved across Prokaryota.

Functional uncoupling of twin polymerases: mechanism of polymerase dissociation from a lagging-strand block

Replication forks are constantly subjected to events that lead to fork stalling, stopping, or collapse. Using a synthetic rolling circle DNA substrate, we demonstrate that a block to the lagging-strand polymerase does not compromise helicase or leading-strand polymerase activity. In fact, lagging-strand synthesis also continues. Thus, the blocked lagging-strand enzyme quickly dissociates from the block site and resumes synthesis on new primed sites. Furthermore, studies in which the lagging polymerase is continuously blocked show that the leading polymerase continues unabated even as it remains attached to the lagging-strand enzyme. Hence, upon encounter of a block to the lagging stand, the polymerases functionally uncouple yet remain physically associated. Further study reveals that naked single-stranded DNA results in disruption of a stalled polymerase from its beta-DNA substrate. Thus, as the replisome advances, the single-stranded DNA loop that accumulates on the lagging-strand template releases the stalled lagging-strand polymerase from beta after SSB protein is depleted. The lagging-strand polymerase is then free to continue Okazaki fragment production.

A peptide switch regulates DNA polymerase processivity

Chromosomal DNA polymerases are tethered to DNA by a circular sliding clamp for high processivity. However, lagging strand synthesis requires the polymerase to rapidly dissociate on finishing each Okazaki fragment. The Escherichia coli replicase contains a subunit (tau) that promotes separation of polymerase from its clamp on finishing DNA segments. This report reveals the mechanism of this process. We find that tau binds the C-terminal residues of the DNA polymerase. Surprisingly, this same C-terminal "tail" of the polymerase interacts with the beta clamp, and tau competes with beta for this sequence. Moreover, tau acts as a DNA sensor. On binding primed DNA, tau releases the polymerase tail, allowing polymerase to bind beta for processive synthesis. But on sensing the DNA is complete (duplex), tau sequesters the polymerase tail from beta, disengaging polymerase from DNA. Therefore, DNA sensing by tau switches the polymerase peptide tail on and off the clamp and coordinates the dynamic turnover of polymerase during lagging strand synthesis.

Mechanism of the E. coli tau processivity switch during lagging-strand synthesis

The E. coli replication machinery employs a beta clamp that tethers the polymerase to DNA, thus ensuring high processivity. The replicase also contains a processivity switch that dissociates the polymerase from its beta clamp. The switch requires the tau subunit of the clamp loader and is regulated by different DNA structures. At a primed site, the switch is "off." When the replicase reaches the downstream primer to form a nick, the switch is flipped, and tau ejects the polymerase from beta. This switch has high fidelity for completed synthesis, remaining "off" until just prior to incorporation of the last nucleotide and turning "on" only after addition of the last dNTP. These actions of tau are confined to its C-terminal region, which is located outside the clamp loading apparatus. Thus, this highly processive replication machine has evolved a mechanism to specifically counteract processivity at a defined time in the lagging-strand cycle.

Replisome-mediated DNA replication

The elaborate process of genomic replication requires a large collection of proteins properly assembled at a DNA replication fork. Several decades of research on the bacterium Escherichia coli and its bacteriophages T4 and T7 have defined the roles of many proteins central to DNA replication. These three different prokaryotic replication systems use the same fundamental components for synthesis at a moving DNA replication fork even though the number and nature of some individual proteins are different and many lack extensive sequence homology. The components of the replication complex can be grouped into functional categories as follows: DNA polymerase, helix destabilizing protein, polymerase accessory factors, and primosome (DNA helicase and DNA primase activities). The replication of DNA derives from a multistep enzymatic pathway that features the assembly of accessory factors and polymerases into a functional holoenzyme; the separation of the double-stranded template DNA by helicase activity and its coupling to the primase synthesis of RNA primers to initiate Okazaki fragment synthesis; and the continuous and discontinuous synthesis of the leading and lagging daughter strands by the polymerases. This review summarizes and compares and contrasts for these three systems the types, timing, and mechanism of reactions and of protein-protein interactions required to initiate, control, and coordinate the synthesis of the leading and lagging strands at a DNA replication fork and comments on their generality.

The delta and delta ' subunits of the DNA polymerase III holoenzyme are essential for initiation complex formation and processive elongation

delta and delta' are required for assembly of the processivity factor beta(2) onto primed DNA in the DNA polymerase III holoenzyme-catalyzed reaction. We developed protocols for generating highly purified preparations of delta and delta'. In holoenzyme reconstitution assays, delta' could not be replaced by delta, tau, or gamma, even when either of the latter were present at a 10,000-fold molar excess. Likewise, delta could not be replaced by delta', tau, or gamma. Bacterial strains bearing chromosomal knockouts of either the holA(delta) or holB(delta') genes were not viable, demonstrating that both delta and delta' are essential. Western blots of isolated initiation complexes demonstrated the presence of both delta and delta'. However, in the absence of chipsi and single-stranded DNA-binding protein, a stable initiation complex lacking deltadelta' was isolated by gel filtration. Lack of delta-delta' decreased the rate of elongation about 3-fold, and the extent of processive replication was significantly decreased. Adding back delta-delta' but not chipsi, delta, or delta' alone restored the diminished activity, indicating that in addition to being key components required for the beta loading activity of the DnaX complex, deltadelta' is present in initiation complex and is required for processive elongation.

Replisome assembly at oriC, the replication origin of E. coli, reveals an explanation for initiation sites outside an origin

This study outlines the events downstream of origin unwinding by DnaA, leading to assembly of two replication forks at the E. coli origin, oriC. We show that two hexamers of DnaB assemble onto the opposing strands of the resulting bubble, expanding it further, yet helicase action is not required. Primase cannot act until the helicases move 65 nucleotides or more. Once primers are formed, two molecules of the large DNA polymerase III holoenzyme machinery assemble into the bubble, forming two replication forks. Primer locations are heterogeneous; some are even outside oriC. This observation generalizes to many systems, prokaryotic and eukaryotic. Heterogeneous initiation sites are likely explained by primase functioning with a moving helicase target.

Trading places on DNA--a three-point switch underlies primer handoff from primase to the replicative DNA polymerase

This study reports a primase-to-polymerase switch in E. coli that closely links primase action with extension by DNA polymerase III holoenzyme. We find that primase tightly grips its RNA primer, protecting it from the action of other proteins. However, primase must be displaced before the beta sliding clamp can be assembled on the primed site. A single subunit of the holoenzyme, chi, is dedicated to this primase displacement task. The displacement mechanism depends on a third protein, SSB. Primase requires contact to SSB for its grip on the primed site. The chi subunit also binds SSB, upon which the primase-to-SSB contact is destabilized leading to dissociation of primase and assembly of beta onto the RNA primer. The conservation of this three-point switch, in which two proteins exchange places on DNA via mutually exclusive interaction with a third protein, is discussed.

ATP binding to the Escherichia coli clamp loader powers opening of the ring-shaped clamp of DNA polymerase III holoenzyme

The Escherichia coli gamma complex serves as a clamp loader, catalyzing ATP-dependent assembly of beta protein clamps onto primed DNA templates during DNA replication. These ring-shaped clamps tether DNA polymerase III holoenzyme to the template, facilitating rapid and processive DNA synthesis. This report focuses on the role of ATP binding and hydrolysis catalyzed by the gamma complex during clamp loading. We show that the energy from ATP binding to gamma complex powers several initial events in the clamp loading pathway. The gamma complex (gamma2 delta delta'chi psi) binds two ATP molecules (one per gamma subunit in the complex) with high affinity (Kd = 1-2. 5 x 10(-6) M) or two adenosine 5'-O-(3-thiotriphosphate)(ATPgammaS) molecules with slightly lower affinity (Kd = 5-6.5 x 10(-6) M). Experiments performed prior to the first ATP turnover (kcat = 4 x 10(-3) s-1 at 4 degreesC), or in the presence of ATPgammaS (kcat = 1 x 10(-4) s-1 at 37 degreesC), demonstrate that upon interaction with ATP the gamma complex undergoes a change in conformation. This ATP-bound gamma complex binds beta and opens the ring at the dimer interface. Still prior to ATP hydrolysis, the composite of gamma complex and the open beta ring binds with high affinity to primer-template DNA. Thus ATP binding powers all the steps in the clamp loading pathway leading up to the assembly of a gamma complex. open beta ring.DNA intermediate, setting the stage for ring closing and turnover of the clamp loader, steps that may be linked to subsequent hydrolysis of ATP.

Devoted to the lagging strand-the subunit of DNA polymerase III holoenzyme contacts SSB to promote processive elongation and sliding clamp assembly

Escherichia coli DNA polymerase III holoenzyme contains 10 different subunits which assort into three functional components: a core catalytic unit containing DNA polymerase activity, the beta sliding clamp that encircles DNA for processive replication, and a multisubunit clamp loader apparatus called gamma complex that uses ATP to assemble the beta clamp onto DNA. We examine here the function of the psi subunit of the gamma complex clamp loader. Omission of psi from the holoenzyme prevents contact with single-stranded DNA-binding protein (SSB) and lowers the efficiency of clamp loading and chain elongation under conditions of elevated salt. We also show that the product of a classic point mutant of SSB, SSB-113, lacks strong affinity for psi and is defective in promoting clamp loading and processive replication at elevated ionic strength. SSB-113 carries a single amino acid replacement at the penultimate residue of the C-terminus, indicating the C-terminus as a site of interaction with psi. Indeed, a peptide of the 15 C-terminal residues of SSB is sufficient to bind to psi. These results establish a role for the psi subunit in contacting SSB, thus enhancing the clamp loading and processivity of synthesis of the holoenzyme, presumably by helping to localize the holoenzyme to sites of SSB-coated ssDNA.

Regulation of DNA replication and repair proteins through interaction with the front side of proliferating cell nuclear antigen

The DNA polymerase accessory factor proliferating cell nuclear antigen (PCNA) has been caught in interaction with an ever increasing number of proteins. To characterize the sites and functions of some of these interactions, we constructed four mutants of human PCNA and analysed them in a variety of assays. By targeting loops on the surface of the PCNA trimer and changing three or four residues at a time to alanine, we found that a region including part of the domain-connecting loop of PCNA and loops on one face of the trimer, close to the C-termini, is involved in binding to all of the following proteins: DNA polymerase delta, replication factor C, the flap endonuclease Fen1, the cyclin dependent kinase inhibitor p21 and DNA ligase I. An inhibition of DNA ligation caused by the interaction of PCNA with DNA ligase I was found, and we show that DNA ligase I and Fen1 can inhibit DNA synthesis by DNA polymerase delta/PCNA. We demonstrate that PCNA must be located below a 5' flap on a forked template to stimulate Fen1 activity, and considering the interacting region on PCNA for Fen1, this suggests an orientation for PCNA during DNA replication with the C-termini facing forwards, in the direction of DNA synthesis.

Destabilized PCNA trimers suppress defective Rfc1 proteins in vivo and in vitro

Replication factor C (RFC) and the proliferating cell nuclear antigen (PCNA) are two essential DNA polymerase accessory proteins that are required for numerous aspects of DNA metabolism including DNA replication, DNA repair, and telomere metabolism. PCNA is a homotrimeric ring-shaped sliding DNA clamp that can facilitate DNA replication by tethering DNA polymerase delta or DNA polymerase epsilon to the DNA template. RFC is the 5-subunit multiprotein complex that loads PCNA onto DNA at primer-template junctions in an ATP-dependent reaction. All five of the RFC subunits share a set of related sequences (RFC boxes) that include nucleotide-binding consensus sequences. We report here that a mutation in the gene encoding the large subunit of yeast RFC gives rise to DNA metabolism defects that can be observed in vivo and in vitro. The rfc1-1 substitution (D513N) lies within the widely conserved RFC box VIII consensus sequence and results in phenotypes including DNA replication defects, increased sensitivity to DNA damaging agents, and elongated telomeres. Mutant Rfc1-1 complexes exhibit in vitro DNA replication defects that are sensitive to ATP concentrations, and these defects can be suppressed by mutant PCNA proteins which contain substitutions that destabilize the homotrimeric sliding DNA clamp.

Formation of a DNA loop at the replication fork generated by bacteriophage T7 replication proteins

Intermediates in the replication of circular and linear M13 double-stranded DNA by bacteriophage T7 proteins have been examined by electron microscopy. Synthesis generated double-stranded DNA molecules containing a single replication fork with a linear duplex tail. A complex presumably consisting of T7 DNA polymerase and gene 4 helicase/primase molecules was present at the fork together with a variable amount of single-stranded DNA sequestered by gene 2.5 single-stranded DNA binding protein. Analysis of the length distribution of Okazaki fragments formed at different helicase/primase concentrations was consistent with coupling of leading and lagging strand replication. Fifteen to forty percent of the templates engaged in replication have a DNA loop at the replication fork. The loops are fully double-stranded with an average length of approximately 1 kilobase. Labeling with biotinylated dCTP showed that the loops consist of newly synthesized DNA, and synchronization experiments using a linear template with a G-less cassette demonstrated that the loops are formed by active displacement of the lagging strand. A long standing feature of models for coupled leading/lagging strand replication has been the presence of a DNA loop at the replication fork. This study provides the first direct demonstration of such loops.

Role of the core DNA polymerase III subunits at the replication fork. Alpha is the only subunit required for processive replication

The DNA polymerase III holoenzyme is composed of 10 subunits. The core of the polymerase contains the catalytic polymerase subunit, alpha, the proofreading 3'-->5' exonuclease, epsilon, and a subunit of unknown function, theta. The availability of the holoenzyme subunits in purified form has allowed us to investigate their roles at the replication fork. We show here that of the three subunits in the core polymerase, only alpha is required to form processive replication forks that move at high rates and that exhibit coupled leading- and lagging-strand synthesis in vitro. Taken together with previous data this suggests that the primary determinant of replication fork processivity is the interaction between another holoenzyme subunit, tau, and the replication fork helicase, DnaB.

Functionally interacting telomerase RNAs in the yeast telomerase complex

The ribonucleoprotein (RNP) enzyme telomerase from Saccharomyces cerevisiae adds telomeric DNA to chromosomal ends in short increments both in vivo and in vitro. Whether or not telomerase functions as a multimer has not been addressed previously. Here we show, first, that following polymerization, the telomerase RNP remains stably bound to its telomeric oligonucleotide reaction product. We then exploit this finding and a previously reported mutant telomerase RNA to demonstrate that, unexpectedly, the S. cerevisiae telomerase complex contains at least two functionally interacting RNA molecules that both act as templates for DNA polymerization. Here, functional telomerase contains at least two active sites.

Transcription of genes encoding DNA replication proteins is coincident with cell cycle control of DNA replication in Caulobacter crescentus

DNA replication in the dimorphic bacterium Caulobacter crescentus is tightly linked to its developmental cell cycle. The initiation of chromosomal replication occurs concomitantly with the transition of the motile swarmer cell to the sessile stalked cell. To identify the signals responsible for the cell cycle control of DNA replication initiation, we have characterized a region of the C. crescentus chromosome containing genes that are all involved in DNA replication or recombination, including dnaN, recF, and gyrB. The essential dnaN gene encodes a homolog of the Escherichia coli beta subunit of DNA polymerase III. It is transcribed from three promoters; one is heat inducible, and the other two are induced at the transition from swarmer to stalked cell, coincident with the initiation of DNA replication. The single gyrB promoter is induced at the same time point in the cell cycle. These promoters, as well as those for several other genes encoding DNA replication proteins that are induced at the same time in the cell cycle, share two sequence motifs, suggesting that they represent a family whose transcription is coordinately regulated.

Dynamics of loading the beta sliding clamp of DNA polymerase III onto DNA

A "minimal" DNA primer-template system, consisting of an 80-mer template and 30-mer primer, supports processive DNA synthesis by DNA polymerase III core in the presence of the beta sliding clamp, gamma complex clamp loader, and single-stranded binding protein from Escherichia coli. This primer-template system was used to measure the loading of the beta sliding clamp by the gamma complex in an ATP-dependent reaction. Bound protein-DNA complexes were detected by monitoring fluorescence depolarization of DNA. Steady state and time-resolved anisotropies were measured, and stopped-flow pre-steady state fluorescence measurements allowed visualization of the loading reactions in real time. The rate of loading beta onto DNA was 12 s-1, demonstrating that clamp assembly is rapid on the time scale required for lagging strand Okazaki fragment synthesis. The association rate appears to be limited by an intramolecular step occurring prior to the clamp-loading reaction, possibly the opening of the toroidal beta dimer.

Comparison of the efficiency of synthesis past single bulky DNA adducts in vivo and in vitro by the polymerase III holoenzyme

Previous studies from our laboratory revealed that site-specific and stereospecific styrene oxide (SO) lesions in M13 DNA were readily bypassed when transfected into Escherichia coli cells, but these same lesions blocked the progress of several purified polymerases in vitro when situated in oligodeoxynucleotide templates (Latham, G. J., et al. (1993) J. Biol. Chem. 268, 23427-23434; Latham, G. J., et al. (1995) Chem. Res. Toxicol. 8, 422-430). To resolve this apparent discrepancy, we constructed single-stranded M13 genomes containing single SO adducts and compared their replication efficiencies in E. coli cells to the extent of bypass synthesis in vitro using three different complexes of the purified E. coli polymerase III (Pol III) holoenzyme. The transformation efficiencies of the SO-adducted M13 templates were comparable to those of the nonadducted controls, indicating facile bypass in E. coli. When the identical adducted M13 vectors were replicated in vitro with the reconstituted complexes of the Pol III holoenzyme, the results were consistent with the in vivo data: Synthesis past two of the three SO adducts in M13 was unhindered relative to synthesis on the unadducted M13 control template. Since our previous in vitro assays indicated that SO adducts in 33-mer templates largely blocked polymerases other than Pol III, we repeated these studies using reconstituted Pol III. Significantly, Pol III replication was poorly processive and strongly terminated by SO lesions in 33-mer templates. This result was in stark contrast to the efficient bypass in vitro of the same adducts in M13 DNA. In fact, Pol III-mediated bypass was enhanced to > 75-fold on adducted circular M13 templates as compared to adducted linear oligodeoxynucleotides. The implications of the effects of polymerase processivity and template-primer structure upon lesion bypass are discussed.

Replisome assembly reveals the basis for asymmetric function in leading and lagging strand replication

The E. coli replicase, DNA polymerase III holoenzyme, contains two polymerases for replication of duplex DNA. The DNA strands are antiparallel requiring different modes of replicating the two strands: one is continuous (leading) while the other is discontinuous (lagging). The two polymerases within holoenzyme are generally thought to have asymmetric functions for replication of these two strands. This report finds that the two polymerases have equal properties, both are capable of replicating the more difficult lagging strand. Asymmetric action is, however, imposed by the helicase that encircles the lagging strand. The helicase contact defines the leading polymerase constraining it to a subset of actions, while leaving the other to cycle on the lagging strand. The symmetric actions of the two polymerases free holoenzyme to assemble into the replisome in either orientation without concern for a correct match to one or the other strand.

Dual role of the 44/62 protein as a matchmaker protein and DNA polymerase chaperone during assembly of the bacteriophage T4 holoenzyme complex

Processive DNA synthesis in the bacteriophage T4 system requires the formation of a holoenzyme complex composed of the T4 DNA polymerase and the 44/62 and 45 accessory proteins. While ATP hydrolysis by the 44/62 protein is essential for holoenzyme formation, the role of the sliding clamp or processivity factor is attributed to the 45 protein. Beyond the need for ATP hydrolysis, the exact role of the 44/62 protein in complex assembly has not been clearly defined. In this paper, we have investigated the kinetics of complex assembly in the presence of both saturating and substoichiometric concentrations of the 44/62 protein. Under saturating conditions, complex assembly is 100% efficient, with all of the polymerase bound in a processive complex. Under conditions of limiting 44/62 protein, the 44/62 protein can act catalytically to assemble the 45 protein and polymerase into a productive complex. However, kinetic simulations indicate that a significant fraction of polymerase is sequestered in a nonproductive complex with the 45 protein. Thus, a second role for the 44/62 protein during complex assembly is that of a chaperone protein to ensure productive pol.45.DNA complex formation. We have also investigated the stability of the 45 protein on the DNA. The off rate of 0.003 s-1 for the 45 protein closely parallels that of the holoenzyme complex. Therefore, disassembly of the complex appears to involve the coordinated dissociation of both the 45 protein and the polymerase from the DNA.

A molecular switch in a replication machine defined by an internal competition for protein rings

Replication machines use ring-shaped clamps that encircle DNA to tether the polymerase to the chromosome. The clamp is assembled on DNA by a clamp loader. This report shows that the polymerase and clamp loader coordinate their actions with the clamp by competing for it through overlapping binding sites. The competition is modulated by DNA. In the absence of DNA, the clamp associates with the clamp loader. But after the clamp is placed on DNA, the polymerase develops a tight grip on the clamp and out-competes the clamp loader. After replication of the template, the polymerase looses affinity for the clamp. Now the clamp loader regains access to the clamp and removes it from DNA thus recycling it for future use.

Assembly of a chromosomal replication machine: two DNA polymerases, a clamp loader, and sliding clamps in one holoenzyme particle. I. Organization of the clamp loader

The gamma complex of DNA polymerase III holoenzyme, the replicase of Escherichia coli, couples ATP hydrolysis to the loading of beta sliding clamps onto primed DNA. The beta sliding clamp tethers the holoenzyme replicase to DNA for rapid and processive synthesis. In this report, the gamma complex has been constituted from its five different subunits. Size measurements and subunit stoichiometry studies show a composition of gamma 2 delta 1 delta' 1 1 chi 1 psi 1. Strong intersubunit contacts have been identified by gel filtration, and weaker contacts were identified by surface plasmon resonance measurements. An analogous tau complex has also been constituted and characterized; it is nearly as active as the gamma complex in clamp loading activity, but as shown in the fourth report of this series, it is at a disadvantage in binding the delta, delta', chi, and psi subunits when core is present (Xiao, H., Naktinis, V., and O'Donnell, M. (1995) J. Biol. Chem. 270, 13378-13383). The single copy subunits within the gamma complex provide the basis for the structural asymmetry inherent within DNA polymerase III holoenzyme.