Primary structure and catalytic mechanism of the epoxide hydrolase from Agrobacterium radiobacter AD1

Structural insights into the distinct substrate preferences of two bacterial epoxide hydrolases

Epoxide hydrolases (EHs), which catalyze the transformation of epoxides to diols, are present in many eukaryotic and prokaryotic organisms. They have recently drawn considerable attention from organic chemists owing to their application in the semisynthesis of enantiospecific diol compounds. Here, we report the crystal structures of BoEH from Bosea sp. PAMC 26642 and CaEH from Caballeronia sordidicola PAMC 26510 at 1.95 and 2.43 Å resolution, respectively. Structural analysis showed that the overall structures of BoEH and CaEH commonly possess typical α/β hydrolase fold with the same ring-opening residues (Tyr-Tyr) and conserved catalytic triad residues (Asp-Asp-His). However, the two enzymes were found to have significantly different sequence compositions in the cap domain region, which is involved in the formation of the substrate-binding site in both enzymes. Enzyme activity assay results showed that BoEH had the strongest activity toward the linear aliphatic substrates, whereas CaEH had a higher preference for aromatic- and cycloaliphatic substrates. Computational docking simulations and tunnel identification revealed important residues with different substrate-binding preferences. Collectively, structure comparison studies, together with ligand docking simulation results, suggested that the differences in substrate-binding site residues were highly correlated with substrate specificity.

Potential of Y. lipolytica epoxide hydrolase for efficient production of enantiopure (R)-1,2-octanediol

The recombinant Yleh from a tropical marine yeast Yarrowia lipolytica NCIM 3589 exhibited a high epoxide hydrolase activity of 9.34 ± 1.80 µmol min^-1 mg^-1 protein towards 1,2-epoxyoctane (EO), at pH 8.0 and 30 °C. The reaction product was identified as 1,2-Octanediol (OD) by GC-MS using EO and H₂O¹⁸ as substrate, affirming the functionality of Yleh as an epoxide hydrolase. For EO, the K_m, V_max, and k_cat/K_m values were 0.43 ± 0.017 mM, 0.042 ± 0.003 mM min^-1, and 467.17 ± 39.43 mM^-1 min^-1, respectively. To optimize the reaction conditions for conversion of racemic EO by Yleh catalyst to enantiopure (R)-1,2-octanediol, initially, Response Surface Methodology was employed. Under optimized reaction conditions of 15 mM EO, 150 µg purified Yleh at 30 °C a maximal diol production of 7.11 mM was attained in a short span of 65 min with a yield of 47.4%. Green technology using deep eutectic solvents for the hydrophobic substrate (EO) were tested as co-solvents in Yleh catalyzed EO hydrolysis. Choline chloride-Glycerol, produced 9.08 mM OD with an increased OD yield of 60.5%. Thus, results showed that deep eutectic solvents could be a promising solvent for Yleh-catalyzed reactions making Yleh a potential biocatalyst for the biosynthesis of enantiopure synthons.

Enlightening the Path to Protein Engineering: Chemoselective Turn-On Probes for High-Throughput Screening of Enzymatic Activity

Many successful stories in enzyme engineering are based on the creation of randomized diversity in large mutant libraries, containing millions to billions of enzyme variants. Methods that enabled their evaluation with high throughput are dominated by spectroscopic techniques due to their high speed and sensitivity. A large proportion of studies relies on fluorogenic substrates that mimic the chemical properties of the target or coupled enzymatic assays with an optical read-out that assesses the desired catalytic efficiency indirectly. The most reliable hits, however, are achieved by screening for conversions of the starting material to the desired product. For this purpose, functional group assays offer a general approach to achieve a fast, optical read-out. They use the chemoselectivity, differences in electronic and steric properties of various functional groups, to reduce the number of false-positive results and the analytical noise stemming from enzymatic background activities. This review summarizes the developments and use of functional group probes for chemoselective derivatizations, with a clear focus on screening for enzymatic activity in protein engineering.

The crystal structure of mycobacterial epoxide hydrolase A

The human pathogen Mycobacterium tuberculosis is the causative agent of tuberculosis resulting in over 1 million fatalities every year, despite decades of research into the development of new anti-TB compounds. Unlike most other organisms M. tuberculosis has six putative genes for epoxide hydrolases (EH) of the α/β-hydrolase family with little known about their individual substrates, suggesting functional significance for these genes to the organism. Due to their role in detoxification, M. tuberculosis EH’s have been identified as potential drug targets. Here, we demonstrate epoxide hydrolase activity of M. thermoresistibile epoxide hydrolase A (Mth-EphA) and report its crystal structure in complex with the inhibitor 1,3-diphenylurea at 2.0 Å resolution. Mth-EphA displays high sequence similarity to its orthologue from M. tuberculosis and generally high structural similarity to α/β-hydrolase EHs. The structure of the inhibitor bound complex reveals the geometry of the catalytic residues and the conformation of the inhibitor. Comparison to other EHs from mycobacteria allows insight into the active site plasticity with respect to substrate specificity. We speculate that mycobacterial EHs may have a narrow substrate specificity providing a potential explanation for the genetic repertoire of epoxide hydrolase genes in M. tuberculosis.

Identification and catalytic properties of new epoxide hydrolases from the genomic data of soil bacteria

Epoxide hydrolases (EHs) catalyse the conversion of epoxides into vicinal diols. These enzymes have extensive value in biocatalysis as they can generate enantiopure epoxides and diols which are important and versatile synthetic intermediates for the fine chemical and pharmaceutical industries. Despite these benefits, they have seen limited use in the bioindustry and novel EHs continue to be reported in the literature. We identified twenty-nine putative EHs within the genomes of soil bacteria. Eight of these EHs were explored in terms of their activity. Two limonene epoxide hydrolases (LEHs) and one ⍺/β EH were active on a model compound styrene oxide and its ring-substituted derivatives, with low to good percentage conversions of 18-86%. Further exploration of the substrate scope with enantiopure (R)-styrene oxide and (S)-styrene oxide, showed different epoxide ring opening regioselectivities. Two enzymes, expressed from plasmids pQR1984 and pQR1990 de-symmetrised the meso-epoxide cyclohexene oxide, forming the (R,R)-diol with high enantioselectivity. Two LEHs, from plasmids pQR1980 and pQR1982 catalysed the hydrolysis of (+) and (-) limonene oxide, with diastereomeric preference for the (1S,2S,4R)- and (1R,2R,4S)-diol products, respectively. The enzyme from plasmid pQR1982 had a good substrate scope for a LEH, being active towards styrene oxide, its analogues, cyclohexene oxide and 1,2-epoxyhexane in addition to (±)-limonene oxide. The enzymes from plasmids pQR1982 and pQR1984 had good substrate scopes and their enzymatic properties were characterised with respect to styrene oxide. They had comparable temperature optima and pQR1984 had 70% activity in the presence of 40% of the green solvent MeOH, a useful property for bio-industrial applications. Overall, this study has provided novel EHs with potential value in industrial biocatalysis.

Perspectives of genetically engineered microbes for groundwater bioremediation

Biodegradation is the main process for the removal of organic compounds from the environment, but proceeds slowly for many synthetic chemicals of environmental concern. Research on microbial biodegradation pathways revealed that recalcitrance is - among other factors - caused by biochemical blockages resulting in dysfunctional catabolic routes. This has raised interest in the possibility to construct microorganisms with improved catabolic activities by genetic engineering. Although this goal has been pursued for decades, no full-scale applications have emerged. This perspective explores the lagging implementation of genetically engineered microorganisms in practical bioremediation. The major technical and scientific issues are illustrated by comparing two examples, that of 1,2-dichloroethane where successful full-scale application of pump-and-treat biotreatment processes has been achieved, and 1,2,3-trichloropropane, for which protein and genetic engineering yielded effective bacterial cultures that still await application.

Genetic Deletion or Pharmacological Inhibition of Soluble Epoxide Hydrolase Ameliorates Cardiac Ischemia/Reperfusion Injury by Attenuating NLRP3 Inflammasome Activation

Activation of the nucleotide-binding oligomerization domain-like receptor (NLR) family pyrin domain containing 3 (NLRP3) inflammasome cascade has a role in the pathogenesis of ischemia/reperfusion (IR) injury. There is growing evidence indicating cytochrome p450 (CYP450)-derived metabolites of n-3 and n-6 polyunsaturated fatty acids (PUFAs) possess both adverse and protective effects in the heart. CYP-derived epoxy metabolites are rapidly hydrolyzed by the soluble epoxide hydrolase (sEH). The current study hypothesized that the cardioprotective effects of inhibiting sEH involves limiting activation of the NLRP3 inflammasome. Isolated hearts from young wild-type (WT) and sEH null mice were perfused in the Langendorff mode with either vehicle or the specific sEH inhibitor t-AUCB. Improved post-ischemic functional recovery and better mitochondrial respiration were observed in both sEH null hearts or WT hearts perfused with t-AUCB. Inhibition of sEH markedly attenuated the activation of the NLRP3 inflammasome complex and limited the mitochondrial localization of the fission protein dynamin-related protein-1 (Drp-1) triggered by IR injury. Cardioprotective effects stemming from the inhibition of sEH included preserved activities of both cytosolic thioredoxin (Trx)-1 and mitochondrial Trx-2 antioxidant enzymes. Together, these data demonstrate that inhibiting sEH imparts cardioprotection against IR injury via maintaining post-ischemic mitochondrial function and attenuating a detrimental innate inflammatory response.

Ylehd, an epoxide hydrolase with promiscuous haloalkane dehalogenase activity from tropical marine yeast Yarrowia lipolytica is induced upon xenobiotic stress

Recalcitrant environmental pollutants, like bromoorganics and epoxides are hydrolysed with limited substrate specificities by microbial oxygenases, reductases, hydrolases and dehalogenases. Here, we report the identification and characterisation of a protein (XP_504164) from the tropical marine yeast Yarrowia lipolytica NCIM 3589, known to degrade bromoorganics and epoxides. Multiple sequence alignment suggests it belongs to α/β superfamily with conservation of catalytic triad and oxyanion hole motifs. The corresponding gene cloned and protein (Ylehd) expressed in E. coli BL21AI exhibited epoxide hydrolase activity (24 ± 0.7 nmol s⁻¹ mg⁻¹ protein) at pH 8.0 and promiscuous haloalkane dehalogenase (1.5 ± 0.2 nmol s⁻¹ mg⁻¹ protein) at pH 4.5. Recombinant Ylehd catalyses structurally diverse epoxides and bromoorganics with maximum catalytic efficiency (k_cat/K_m) of 96.56 and 10.1 mM⁻¹ s⁻¹ towards 1,2-Epoxyoctane (EO) and 1-Bromodecane (BD). The expression of Ylehd was highly induced in presence of BD and EO but not in glucose grown cells as studied by immunoblot analyses, q-PCR and activity levels. Immunoelectron microscopy confirmed higher expression in presence of xenobiotics and located it to cytosol. Such inducible nature of Ylehd suggests its physiological role in xenobiotic stress mitigation. This study represents the first functional characterisation of a bifunctional EH/HLD in eukaryotic microbes with broad substrate specificity making it a potential biocatalyst for bioremediation/biosensing of mixed pollutants.

Combinatorial metabolic engineering of Pseudomonas putida KT2440 for efficient mineralization of 1,2,3-trichloropropane

An industrial waste, 1,2,3-trichloropropane (TCP), is toxic and extremely recalcitrant to biodegradation. To date, no natural TCP degraders able to mineralize TCP aerobically have been isolated. In this work, we engineered a biosafety Pseudomonas putida strain KT2440 for aerobic mineralization of TCP by implantation of a synthetic biodegradation pathway into the chromosome and further improved TCP mineralization using combinatorial engineering strategies. Initially, a synthetic pathway composed of haloalkane dehalogenase, haloalcohol dehalogenase and epoxide hydrolase was functionally assembled for the conversion of TCP into glycerol in P. putida KT2440. Then, the growth lag-phase of using glycerol as a growth precursor was eliminated by deleting the glpR gene, significantly enhancing the flux of carbon through the pathway. Subsequently, we improved the oxygen sequestering capacity of this strain through the heterologous expression of Vitreoscilla hemoglobin, which makes this strain able to mineralize TCP under oxygen-limited conditions. Lastly, we further improved intracellular energy charge (ATP/ADP ratio) and reducing power (NADPH/NADP⁺ ratio) by deleting flagella-related genes in the genome of P. putida KT2440. The resulting strain (named KTU-TGVF) could efficiently utilize TCP as the sole source of carbon for growth. Degradation studies in a bioreactor highlight the value of this engineered strain for TCP bioremediation.

Biological conversion of gaseous alkenes to liquid chemicals

Industrial gas-to-liquid (GTL) technologies are well developed. They generally employ syngas, require complex infrastructure, and need high capital investment to be economically viable. Alternatively, biological conversion has the potential to be more efficient, and easily deployed to remote areas on relatively small scales for the utilization of otherwise stranded resources. The present study demonstrates a novel biological GTL process in which engineered Escherichia coli converts C2-C4 gaseous alkenes into liquid diols. Diols are versatile industrially important chemicals, used routinely as antifreeze agents, polymer precursors amongst many other applications. Heterologous co-expression of a monooxygenase and an epoxide hydrolase in E. coli allows whole cell conversion of C2-C4 alkenes for the formation of ethylene glycol, 1,2-propanediol, 1,2-butanediol, and 2,3-butanediol at ambient temperature and pressure in one pot. Increasing intracellular NADH supply via addition of formate and a formate dehydrogenase increases ethylene glycol production titers, resulting in an improved productivity of 9mg/L/h and a final titer of 250mg/L. This represents a novel biological method for GTL conversion of alkenes to industrially valuable diols.

Living biofouling-resistant membranes as a model for the beneficial use of engineered biofilms

Membrane systems are used increasingly for water treatment, recycling water from wastewater, during food processing, and energy production. They thus are a key technology to ensure water, energy, and food sustainability. However, biofouling, the build-up of microbes and their polymeric matrix, clogs these systems and reduces their efficiency. Realizing that a microbial film is inevitable, we engineered a beneficial biofilm that prevents membrane biofouling, limiting its own thickness by sensing the number of its cells that are present via a quorum-sensing circuit. The beneficial biofilm also prevents biofilm formation by deleterious bacteria by secreting nitric oxide, a general biofilm dispersal agent, as demonstrated by both short-term dead-end filtration and long-term cross-flow filtration tests. In addition, the beneficial biofilm was engineered to produce an epoxide hydrolase so that it efficiently removes the environmental pollutant epichlorohydrin. Thus, we have created a living biofouling-resistant membrane system that simultaneously reduces biofouling and provides a platform for biodegradation of persistent organic pollutants.

Exacerbation of substrate toxicity by IPTG in Escherichia coli BL21(DE3) carrying a synthetic metabolic pathway

BACKGROUND

Heterologous expression systems based on promoters inducible with isopropyl-β-D-1-thiogalactopyranoside (IPTG), e.g., Escherichia coli BL21(DE3) and cognate LacI(Q)/P(lacUV5)-T7 vectors, are commonly used for production of recombinant proteins and metabolic pathways. The applicability of such cell factories is limited by the complex physiological burden imposed by overexpression of the exogenous genes during a bioprocess. This burden originates from a combination of stresses that may include competition for the expression machinery, side-reactions due to the activity of the recombinant proteins, or the toxicity of their substrates, products and intermediates. However, the physiological impact of IPTG-induced conditional expression on the recombinant host under such harsh conditions is often overlooked.

RESULTS

The physiological responses to IPTG of the E. coli BL21(DE3) strain and three different recombinants carrying a synthetic metabolic pathway for biodegradation of the toxic anthropogenic pollutant 1,2,3-trichloropropane (TCP) were investigated using plating, flow cytometry, and electron microscopy. Collected data revealed unexpected negative synergistic effect of inducer of the expression system and toxic substrate resulting in pronounced physiological stress. Replacing IPTG with the natural sugar effector lactose greatly reduced such stress, demonstrating that the effect was due to the original inducer's chemical properties.

CONCLUSIONS

IPTG is not an innocuous inducer; instead, it exacerbates the toxicity of haloalkane substrate and causes appreciable damage to the E. coli BL21(DE3) host, which is already bearing a metabolic burden due to its content of plasmids carrying the genes of the synthetic metabolic pathway. The concentration of IPTG can be effectively tuned to mitigate this negative effect. Importantly, we show that induction with lactose, the natural inducer of P lac , dramatically lightens the burden without reducing the efficiency of the synthetic TCP degradation pathway. This suggests that lactose may be a better inducer than IPTG for the expression of heterologous pathways in E. coli BL21(DE3).

Expanding the Catalytic Triad in Epoxide Hydrolases and Related Enzymes

Potato epoxide hydrolase 1 exhibits rich enantio- and regioselectivity in the hydrolysis of a broad range of substrates. The enzyme can be engineered to increase the yield of optically pure products as a result of changes in both enantio- and regioselectivity. It is thus highly attractive in biocatalysis, particularly for the generation of enantiopure fine chemicals and pharmaceuticals. The present work aims to establish the principles underlying the activity and selectivity of the enzyme through a combined computational, structural, and kinetic study using the substrate trans-stilbene oxide as a model system. Extensive empirical valence bond simulations have been performed on the wild-type enzyme together with several experimentally characterized mutants. We are able to computationally reproduce the differences between the activities of different stereoisomers of the substrate and the effects of mutations of several active-site residues. In addition, our results indicate the involvement of a previously neglected residue, H104, which is electrostatically linked to the general base H300. We find that this residue, which is highly conserved in epoxide hydrolases and related hydrolytic enzymes, needs to be in its protonated form in order to provide charge balance in an otherwise negatively charged active site. Our data show that unless the active-site charge balance is correctly treated in simulations, it is not possible to generate a physically meaningful model for the enzyme that can accurately reproduce activity and selectivity trends. We also expand our understanding of other catalytic residues, demonstrating in particular the role of a noncanonical residue, E35, as a "backup base" in the absence of H300. Our results provide a detailed view of the main factors driving catalysis and regioselectivity in this enzyme and identify targets for subsequent enzyme design efforts.

Optimization of translation profiles enhances protein expression and solubility

mRNA is translated with a non-uniform speed that actively coordinates co-translational folding of protein domains. Using structure-based homology we identified the structural domains in epoxide hydrolases (EHs) and introduced slow-translating codons to delineate the translation of single domains. These changes in translation speed dramatically improved the solubility of two EHs of metagenomic origin in Escherichia coli. Conversely, the importance of transient attenuation for the folding, and consequently solubility, of EH was evidenced with a member of the EH family from Agrobacterium radiobacter, which partitions in the soluble fraction when expressed in E. coli. Synonymous substitutions of codons shaping the slow-transiting regions to fast-translating codons render this protein insoluble. Furthermore, we show that low protein yield can be enhanced by decreasing the free folding energy of the initial 5’-coding region, which can disrupt mRNA secondary structure and enhance ribosomal loading. This study provides direct experimental evidence that mRNA is not a mere messenger for translation of codons into amino acids but bears an additional layer of information for folding, solubility and expression level of the encoded protein. Furthermore, it provides a general frame on how to modulate and fine-tune gene expression of a target protein.

Biocatalytic synthesis of C3 chiral building blocks by chloroperoxidase-catalyzed enantioselective halo-hydroxylation and epoxidation in the presence of ionic liquids

The optically active C3 synthetic blocks are remarkably versatile intermediates for the synthesis of numerous pharmaceuticals and agrochemicals. This work provides a simple and efficient enzymatic synthetic route for the environment-friendly synthesis of C3 chiral building blocks. Chloroperoxidase (CPO)-catalyzed enantioselective halo-hydroxylation and epoxidation of chloropropene and allyl alcohol was employed to prepare C3 chiral building blocks in this work, including (R)-2,3-dichloro-1-propanol (DCP*), (R)-2,3-epoxy-1-propanol (GLD*), and (R)-3-chloro-1-2-propanediol (CPD*). The ee values of the formed C3 chiral building blocks DCP*, CPD*, and glycidol were 98.1, 97.5, and 96.7%, respectively. Moreover, the use of small amount of imidazolium ionic liquid enhanced the yield efficiently due to the increase of solubility of hydrophobic organic substrates in aqueous reaction media, as well as the improvement of affinity and selectivity of CPO to substrate.

Expanding the Halohydrin Dehalogenase Enzyme Family: Identification of Novel Enzymes by Database Mining

Halohydrin dehalogenases are very rare enzymes that are naturally involved in the mineralization of halogenated xenobiotics. Due to their catalytic potential and promiscuity, many biocatalytic reactions have been described that have led to several interesting and industrially important applications. Nevertheless, only a few of these enzymes have been made available through recombinant techniques; hence, it is of general interest to expand the repertoire of these enzymes so as to enable novel biocatalytic applications. After the identification of specific sequence motifs, 37 novel enzyme sequences were readily identified in public sequence databases. All enzymes that could be heterologously expressed also catalyzed typical halohydrin dehalogenase reactions. Phylogenetic inference for enzymes of the halohydrin dehalogenase enzyme family confirmed that all enzymes form a distinct monophyletic clade within the short-chain dehydrogenase/reductase superfamily. In addition, the majority of novel enzymes are substantially different from previously known phylogenetic subtypes. Consequently, four additional phylogenetic subtypes were defined, greatly expanding the halohydrin dehalogenase enzyme family. We show that the enormous wealth of environmental and genome sequences present in public databases can be tapped for in silico identification of very rare but biotechnologically important biocatalysts. Our findings help to readily identify halohydrin dehalogenases in ever-growing sequence databases and, as a consequence, make even more members of this interesting enzyme family available to the scientific and industrial community.

Trigger factor assisted folding of the recombinant epoxide hydrolases identified from C. pelagibacter and S. nassauensis

Epoxide hydrolases (EHs), are enantioselective enzymes as they catalyze the kinetic resolution of racemic epoxides into the corresponding enantiopure vicinal diols, which are useful precursors in the synthesis of chiral pharmaceutical compounds. Here, we have identified and cloned two putative epoxide hydrolase genes (cpeh and sneh) from marine bacteria, Candidatus pelagibacter ubique and terrestrial bacteria, Stackebrandtia nassauensis, respectively and overexpressed them in pET28a vector in Escherichia coli BL21(DE3). The CPEH protein (42kDa) was found to be overexpressed as inactive inclusion bodies while SNEH protein (40kDa) was found to form soluble aggregates. In this study, the recombinant CPEH was successfully transformed from insoluble aggregates to the soluble and functionally active form, using pCold TF vector, though with low EH activity. To prevent the soluble aggregate formation of SNEH, it was co-expressed with GroEL/ES chaperone and was also fused with trigger factor (TF) chaperone at its N-terminus. The TF chaperone-assisted correct folding of SNEH led to a purified active EH with a specific activity of 3.85μmol/min/mg. The pure enzyme was further used to biocatalyze the hydrolysis of 10mM benzyl glycidyl ether (BGE) and α-methyl styrene oxide (MSO) with an enantiomeric excess of the product (eep) of 86% and 73% in 30 and 15min, respectively. In conclusion, this is the first report about the heterologous expression of epoxide hydrolases using TF as a molecular chaperone in pCold TF expression vector, resulting in remarkable increase in the solubility and activity of the otherwise improperly folded recombinant epoxide hydrolases.

Compositional profile of α / β-hydrolase fold proteins in mangrove soil metagenomes: prevalence of epoxide hydrolases and haloalkane dehalogenases in oil-contaminated sites

The occurrence of genes encoding biotechnologically relevant α/β-hydrolases in mangrove soil microbial communities was assessed using data obtained by whole-metagenome sequencing of four mangroves areas, denoted BrMgv01 to BrMgv04, in São Paulo, Brazil. The sequences (215 Mb in total) were filtered based on local amino acid alignments against the Lipase Engineering Database. In total, 5923 unassembled sequences were affiliated with 30 different α/β-hydrolase fold superfamilies. The most abundant predicted proteins encompassed cytosolic hydrolases (abH08; ∼ 23%), microsomal hydrolases (abH09; ∼ 12%) and Moraxella lipase-like proteins (abH04 and abH01; < 5%). Detailed analysis of the genes predicted to encode proteins of the abH08 superfamily revealed a high proportion related to epoxide hydrolases and haloalkane dehalogenases in polluted mangroves BrMgv01-02-03. This suggested selection and putative involvement in local degradation/detoxification of the pollutants. Seven sequences that were annotated as genes for putative epoxide hydrolases and five for putative haloalkane dehalogenases were found in a fosmid library generated from BrMgv02 DNA. The latter enzymes were predicted to belong to Actinobacteria, Deinococcus-Thermus, Planctomycetes and Proteobacteria. Our integrated approach thus identified 12 genes (complete and/or partial) that may encode hitherto undescribed enzymes. The low amino acid identity (< 60%) with already-described genes opens perspectives for both production in an expression host and genetic screening of metagenomes.

Maximizing the efficiency of multienzyme process by stoichiometry optimization

Multienzyme processes represent an important area of biocatalysis. Their efficiency can be enhanced by optimization of the stoichiometry of the biocatalysts. Here we present a workflow for maximizing the efficiency of a three-enzyme system catalyzing a five-step chemical conversion. Kinetic models of pathways with wild-type or engineered enzymes were built, and the enzyme stoichiometry of each pathway was optimized. Mathematical modeling and one-pot multienzyme experiments provided detailed insights into pathway dynamics, enabled the selection of a suitable engineered enzyme, and afforded high efficiency while minimizing biocatalyst loadings. Optimizing the stoichiometry in a pathway with an engineered enzyme reduced the total biocatalyst load by an impressive 56 %. Our new workflow represents a broadly applicable strategy for optimizing multienzyme processes.

Immobilized synthetic pathway for biodegradation of toxic recalcitrant pollutant 1,2,3-trichloropropane

The anthropogenic compound 1,2,3-trichloropropane (TCP) has recently drawn attention as an emerging groundwater contaminant. No living organism, natural or engineered, is capable of the efficient aerobic utilization of this toxic industrial waste product. We describe a novel biotechnology for transforming TCP based on an immobilized synthetic pathway. The pathway is composed of three enzymes from two different microorganisms: engineered haloalkane dehalogenase from Rhodococcus rhodochrous NCIMB 13064, and haloalcohol dehalogenase and epoxide hydrolase from Agrobacterium radiobacter AD1. Together, they catalyze consecutive reactions converting toxic TCP to harmless glycerol. The pathway was immobilized in the form of purified enzymes or cell-free extracts, and its performance was tested in batch and continuous systems. Using a packed bed reactor filled with the immobilized biocatalysts, 52.6 mmol of TCP was continuously converted into glycerol within 2.5 months of operation. The efficiency of the TCP conversion to the intermediates was 97%, and the efficiency of conversion to the final product glycerol was 78% during the operational period. Immobilized biocatalysts are suitable for removing TCP from contaminated water up to a 10 mM solubility limit, which is an order of magnitude higher than the concentration tolerated by living microorganisms.

Computer-assisted engineering of the synthetic pathway for biodegradation of a toxic persistent pollutant

Anthropogenic halogenated compounds were unknown to nature until the industrial revolution, and microorganisms have not had sufficient time to evolve enzymes for their degradation. The lack of efficient enzymes and natural pathways can be addressed through a combination of protein and metabolic engineering. We have assembled a synthetic route for conversion of the highly toxic and recalcitrant 1,2,3-trichloropropane to glycerol in Escherichia coli, and used it for a systematic study of pathway bottlenecks. Optimal ratios of enzymes for the maximal production of glycerol, and minimal toxicity of metabolites were predicted using a mathematical model. The strains containing the expected optimal ratios of enzymes were constructed and characterized for their viability and degradation efficiency. Excellent agreement between predicted and experimental data was observed. The validated model was used to quantitatively describe the kinetic limitations of currently available enzyme variants and predict improvements required for further pathway optimization. This highlights the potential of forward engineering of microorganisms for the degradation of toxic anthropogenic compounds.

Biocatalytic resolution of glycidyl phenyl ether using a novel epoxide hydrolase from a marine bacterium, Maritimibacter alkaliphilus KCCM 42376 [corrected]

As a continuous effort of developing highly enantioselective epoxide hydrolase from marine microorganisms, it was found that Maritimibacter alkaliphilus KCCM 42376 [corrected] was highly enantioselective toward racemic glycidyl phenyl ether (GPE). An open reading frame (ORF) encoding a putative epoxide hydrolase (EHase) was cloned from the genome of Maritimibacter alkaliphilus KCCM 42376 [corrected], followed by expression and purification in Escherichia coli. The purified EHase (REH) hydrolyzed (S)-GPE preferentially over (R)-GPE. Enantiopure (R)-GPE from kinetic resolution of 29.2 mM racemic GPE using the purified REH could be obtained with enantiopurity of more than 99.9% enantiomeric excess (ee) and 38.4% yield (theoretical, 50%) within 20 min (enantiomeric ratio (E-value): 38.4). The enantioselective activity of REH toward GPE was also confirmed by the analysis of the vicinal diol, 3-phenoxy-1,2-propanediol. To our knowledge, this study demonstrates the highest enantioselective resolution of racemic GPE using a purified biocatalyst among the known native EHases.

Biochemical characterization and transcriptional analysis of the epoxide hydrolase from white-rot fungus Phanerochaete chrysosporium

The white-rot basidiomycetes Phanerochaete chrysosporium is a model fungus used to investigate the secondary metabolism and lignin degradation. Genomic sequencing reveals the presence of at least 18 genes encoding putative epoxide hydrolases (EHs). One cDNA encoding EH (designated as PchEHA) was cloned and expressed in Escherichia coli. Transcriptional analysis demonstrated that the transcripts of PchEHA could be detected under the ligninolytic and nonligninolytic conditions as well as amended with anthracene. The recombinant enzyme exhibits broad hydrolytic activity toward several racemic epoxides including styrene oxide, epichlorohydrin, and 1,2-epoxybutane, but with different specificity. Using racemic styrene oxide as the substrate, the optimal pH and temperature are pH 9.0 and 40 degrees C, respectively. The enzyme is not sensitive to EDTA, and is inhibited by H2O2, and several metal ions including Zn(2+), Cd(2+), and Hg(2+) at various extents. Several organic cosolvents including acetone, dimethylsulfoxide, formamide, glycerol and ethanol at 10% (v/v) cause slight or no inhibition of the hydrolytic reaction. More importantly, the recombinant enzyme displays distinct enantioselective preference to several chiral epoxides. The enzyme showed good enantioselectivity toward chiral styrene oxide with preferential hydrolysis of (R)-enantiomer. PchEHA is likely a novel soluble EH based on the sequence analysis and catalytic properties, and is a great potential biocatalyst for the preparation of enantiopure styrene oxide in racemic kinetic resolution.

X-Ray crystallographic and mutational studies of fluoroacetate dehalogenase from Burkholderia sp. strain FA1

Fluoroacetate dehalogenase catalyzes the hydrolytic defluorination of fluoroacetate to produce glycolate. The enzyme is unique in that it catalyzes the cleavage of a carbon-fluorine bond of an aliphatic compound: the bond energy of the carbon-fluorine bond is among the highest found in natural products. The enzyme also acts on chloroacetate, although much less efficiently. We here determined the X-ray crystal structure of the enzyme from Burkholderia sp. strain FA1 as the first experimentally determined three-dimensional structure of fluoroacetate dehalogenase. The enzyme belongs to the alpha/beta hydrolase superfamily and exists as a homodimer. Each subunit consists of core and cap domains. The catalytic triad, Asp104-His271-Asp128, of which Asp104 serves as the catalytic nucleophile, was found in the core domain at the domain interface. The active site was composed of Phe34, Asp104, Arg105, Arg108, Asp128, His271, and Phe272 of the core domain and Tyr147, His149, Trp150, and Tyr212 of the cap domain. An electron density peak corresponding to a chloride ion was found in the vicinity of the N(epsilon1) atom of Trp150 and the N(epsilon2) atom of His149, suggesting that these are the halide ion acceptors. Site-directed replacement of each of the active-site residues, except for Trp150, by Ala caused the total loss of the activity toward fluoroacetate and chloroacetate, whereas the replacement of Trp150 caused the loss of the activity only toward fluoroacetate. An interaction between Trp150 and the fluorine atom is probably an absolute requirement for the reduction of the activation energy for the cleavage of the carbon-fluorine bond.

Cloning and characterization of an epoxide hydrolase from Novosphingobium aromaticivorans

A gene encoding a putative epoxide hydrolase (EHase) was identified by analyzing an open reading frame of the genome sequence of Novosphingobium aromaticivorans, retaining the conserved catalytic residues such as the catalytic triad (Asp177, Glu328, and His355) and the oxyanion hole. The enantioselective EHase gene (neh) was cloned, and the recombinant EHase could be purified to apparent homogeneity by one step of metal affinity chromatography and further characterized. The purified N. aromaticivorans enantioselective epoxide hydrolase (NEH) showed enantioselective hydrolysis toward styrene oxide, glycidyl phenyl ether, epoxybutane, and epichlorohydrin. The optimal EHase activity toward styrene oxide occurred at pH 6.5 and 45 degrees C. The purified NEH could preferentially hydrolyze (R)-styrene oxide with enantiomeric excess of more than 99% and 11.7% yield after 20-min incubation at an optimal condition. The enantioselective hydrolysis of styrene oxide was also confirmed by the analysis of the vicinal diol, 1-phenyl-1,2-ethanediol. The hydrolyzing rates of the purified NEH toward epoxide substrates were not affected by as high as 100 mM racemic styrene oxide.

Inactivation of epoxide hydrolase by catalysis-induced formation of isoaspartate

Epoxide hydrolases catalyze hydrolytic epoxide ring-opening, most often via formation of a covalent hydroxyalkyl-enzyme intermediate. A mutant of Agrobacterium radiobacter epoxide hydrolase, in which the phenylalanine residue that flanks the invariant catalytic aspartate nucleophile is replaced by a threonine, exhibited inactivation during conversion when the (R)-enantiomer of para-nitrostyrene epoxide was used as substrate. HPLC analysis of tryptic fragments of the epoxide hydrolase, followed by MALDI-TOF and TOF/TOF analysis, indicated that inactivation was due to conversion of the nucleophilic aspartate into isoaspartate, which represents a novel mechanism of catalysis-induced autoinactivation. Inactivation occurred at a lower rate with the (S)-enantiomer of para-nitrostyrene epoxide, indicating that it is related to the structure of the covalent hydroxyalkyl-enzyme intermediate.

Cloning of an epoxide hydrolase-encoding gene from Aspergillus niger M200, overexpression in E. coli, and modification of activity and enantioselectivity of the enzyme by protein engineering

The gene encoding an epoxide hydrolase from Aspergillus niger M200 has been cloned and its sequence determined. The gene is interrupted by seven introns, one exon being only nine nucleotides long. The non-coding 5'- and 3'-regions of the mRNA are composed of 47 and 76 nucleotides, respectively. Overexpression of the fungal epoxide hydrolase in E. coli TOP10 has led to a 15-fold increase in specific activity (compared to the wild-type strain). Saturation mutagenesis at codon 217 resulted in the discovery of nine enzyme variants showing in several cases profound differences in activity and enantioselectivity towards various epoxides when compared to the data of the wild-type enzyme. The site 217 is located at the entrance of the tunnel that provides the substrate with access to the active site. The exchange of Ala at this position for Cys has led to a doubled enantioselectivity (E-value of 5.0) towards benzyl glycidyl ether. The same substitution resulted in a threefold-enhanced activity of the enzyme towards allyl glycidyl ether and styrene oxide without affecting enantioselectivity. The variant A217L showed an enhanced enantioselectivity towards tert-butyl glycidyl ether reaching an E-value of 100 (from 60 for the wild-type enzyme). Replacement of A217 by Val has led to higher activity towards allyl glycidyl ether by a factor of six. The substitutions Ala-->Glu and Ala-->Gln increased the enantioselectivity towards allyl glycidyl ether and styrene oxide by over 50% to E-values of 10 and 16, respectively. The study underlines that single amino acid exchanges in the substrate tunnel region can lead to significant improvements in enantioselectivity and activity of the epoxide hydrolase from A. niger M200.

Cloning and characterization of three epoxide hydrolases from a marine bacterium, Erythrobacter litoralis HTCC2594

Previously, we reported that ten strains belonging to Erythrobacter showed epoxide hydrolase (EHase) activities toward various epoxide substrates. Three genes encoding putative EHases were identified by analyzing open reading frames of Erythrobacter litoralis HTCC2594. Despite low similarities to reported EHases, the phylogenetic analysis of the three genes showed that eeh1 was similar to microsomal EHase, while eeh2 and eeh3 could be grouped with soluble EHases. The three EHase genes were cloned, and the recombinant proteins (rEEH1, rEEH2, and rEEH3) were purified. The functionality of purified proteins was proved by hydrolytic activities toward styrene oxide. EEH1 preferentially hydrolyzed (R)-styrene oxide, whereas EEH3 preferred to hydrolyze (S)-styrene oxide, representing enantioselective hydrolysis of styrene oxide. On the other hand, EEH2 could hydrolyze (R)- and (S)-styrene oxide at an equal rate. The optimal pH and temperature for the EHases occurred largely at neutral pHs and 40-55 degrees C. The substrate selectivity of rEEH1, rEEH2, and rEEH3 toward various epoxide substrates were also investigated. This is the first representation that a strict marine microorganism possessed three EHases with different enantioselectivity toward styrene oxide.